[PATCH v2 01/14] clocksource: sh_cmt: Drop support for legacy platform data
Laurent Pinchart
laurent.pinchart+renesas at ideasonboard.com
Fri Apr 18 07:48:01 PDT 2014
Now that all platforms have switched to the new-style platform data,
drop support for the legacy version.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
drivers/clocksource/sh_cmt.c | 172 ++++++++++---------------------------------
1 file changed, 40 insertions(+), 132 deletions(-)
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index bc8d025..ff1a059 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -114,9 +114,7 @@ struct sh_cmt_device {
struct platform_device *pdev;
const struct sh_cmt_info *info;
- bool legacy;
- void __iomem *mapbase_ch;
void __iomem *mapbase;
struct clk *clk;
@@ -792,7 +790,7 @@ static int sh_cmt_register_clockevent(struct sh_cmt_channel *ch,
int irq;
int ret;
- irq = platform_get_irq(ch->cmt->pdev, ch->cmt->legacy ? 0 : ch->index);
+ irq = platform_get_irq(ch->cmt->pdev, ch->index);
if (irq < 0) {
dev_err(&ch->cmt->pdev->dev, "ch%u: failed to get irq\n",
ch->index);
@@ -863,33 +861,26 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index,
* Compute the address of the channel control register block. For the
* timers with a per-channel start/stop register, compute its address
* as well.
- *
- * For legacy configuration the address has been mapped explicitly.
*/
- if (cmt->legacy) {
- ch->ioctrl = cmt->mapbase_ch;
- } else {
- switch (cmt->info->model) {
- case SH_CMT_16BIT:
- ch->ioctrl = cmt->mapbase + 2 + ch->hwidx * 6;
- break;
- case SH_CMT_32BIT:
- case SH_CMT_48BIT:
- ch->ioctrl = cmt->mapbase + 0x10 + ch->hwidx * 0x10;
- break;
- case SH_CMT_32BIT_FAST:
- /*
- * The 32-bit "fast" timer has a single channel at hwidx
- * 5 but is located at offset 0x40 instead of 0x60 for
- * some reason.
- */
- ch->ioctrl = cmt->mapbase + 0x40;
- break;
- case SH_CMT_48BIT_GEN2:
- ch->iostart = cmt->mapbase + ch->hwidx * 0x100;
- ch->ioctrl = ch->iostart + 0x10;
- break;
- }
+ switch (cmt->info->model) {
+ case SH_CMT_16BIT:
+ ch->ioctrl = cmt->mapbase + 2 + ch->hwidx * 6;
+ break;
+ case SH_CMT_32BIT:
+ case SH_CMT_48BIT:
+ ch->ioctrl = cmt->mapbase + 0x10 + ch->hwidx * 0x10;
+ break;
+ case SH_CMT_32BIT_FAST:
+ /*
+ * The 32-bit "fast" timer has a single channel at hwidx 5 but
+ * is located at offset 0x40 instead of 0x60 for some reason.
+ */
+ ch->ioctrl = cmt->mapbase + 0x40;
+ break;
+ case SH_CMT_48BIT_GEN2:
+ ch->iostart = cmt->mapbase + ch->hwidx * 0x100;
+ ch->ioctrl = ch->iostart + 0x10;
+ break;
}
if (cmt->info->width == (sizeof(ch->max_match_value) * 8))
@@ -900,12 +891,7 @@ static int sh_cmt_setup_channel(struct sh_cmt_channel *ch, unsigned int index,
ch->match_value = ch->max_match_value;
raw_spin_lock_init(&ch->lock);
- if (cmt->legacy) {
- ch->timer_bit = ch->hwidx;
- } else {
- ch->timer_bit = cmt->info->model == SH_CMT_48BIT_GEN2
- ? 0 : ch->hwidx;
- }
+ ch->timer_bit = cmt->info->model == SH_CMT_48BIT_GEN2 ? 0 : ch->hwidx;
ret = sh_cmt_register(ch, dev_name(&cmt->pdev->dev),
clockevent, clocksource);
@@ -938,60 +924,12 @@ static int sh_cmt_map_memory(struct sh_cmt_device *cmt)
return 0;
}
-static int sh_cmt_map_memory_legacy(struct sh_cmt_device *cmt)
-{
- struct sh_timer_config *cfg = cmt->pdev->dev.platform_data;
- struct resource *res, *res2;
-
- /* map memory, let mapbase_ch point to our channel */
- res = platform_get_resource(cmt->pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&cmt->pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
- }
-
- cmt->mapbase_ch = ioremap_nocache(res->start, resource_size(res));
- if (cmt->mapbase_ch == NULL) {
- dev_err(&cmt->pdev->dev, "failed to remap I/O memory\n");
- return -ENXIO;
- }
-
- /* optional resource for the shared timer start/stop register */
- res2 = platform_get_resource(cmt->pdev, IORESOURCE_MEM, 1);
-
- /* map second resource for CMSTR */
- cmt->mapbase = ioremap_nocache(res2 ? res2->start :
- res->start - cfg->channel_offset,
- res2 ? resource_size(res2) : 2);
- if (cmt->mapbase == NULL) {
- dev_err(&cmt->pdev->dev, "failed to remap I/O second memory\n");
- iounmap(cmt->mapbase_ch);
- return -ENXIO;
- }
-
- /* identify the model based on the resources */
- if (resource_size(res) == 6)
- cmt->info = &sh_cmt_info[SH_CMT_16BIT];
- else if (res2 && (resource_size(res2) == 4))
- cmt->info = &sh_cmt_info[SH_CMT_48BIT_GEN2];
- else
- cmt->info = &sh_cmt_info[SH_CMT_32BIT];
-
- return 0;
-}
-
-static void sh_cmt_unmap_memory(struct sh_cmt_device *cmt)
-{
- iounmap(cmt->mapbase);
- if (cmt->mapbase_ch)
- iounmap(cmt->mapbase_ch);
-}
-
static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
{
struct sh_timer_config *cfg = pdev->dev.platform_data;
const struct platform_device_id *id = pdev->id_entry;
- unsigned int hw_channels;
+ unsigned int mask;
+ unsigned int i;
int ret;
memset(cmt, 0, sizeof(*cmt));
@@ -1003,10 +941,9 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
}
cmt->info = (const struct sh_cmt_info *)id->driver_data;
- cmt->legacy = cmt->info ? false : true;
/* Get hold of clock. */
- cmt->clk = clk_get(&cmt->pdev->dev, cmt->legacy ? "cmt_fck" : "fck");
+ cmt->clk = clk_get(&cmt->pdev->dev, "fck");
if (IS_ERR(cmt->clk)) {
dev_err(&cmt->pdev->dev, "cannot get clock\n");
return PTR_ERR(cmt->clk);
@@ -1016,27 +953,13 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
if (ret < 0)
goto err_clk_put;
- /*
- * Map the memory resource(s). We need to support both the legacy
- * platform device configuration (with one device per channel) and the
- * new version (with multiple channels per device).
- */
- if (cmt->legacy)
- ret = sh_cmt_map_memory_legacy(cmt);
- else
- ret = sh_cmt_map_memory(cmt);
-
+ /* Map the memory resource(s). */
+ ret = sh_cmt_map_memory(cmt);
if (ret < 0)
goto err_clk_unprepare;
/* Allocate and setup the channels. */
- if (cmt->legacy) {
- cmt->num_channels = 1;
- hw_channels = 0;
- } else {
- cmt->num_channels = hweight8(cfg->channels_mask);
- hw_channels = cfg->channels_mask;
- }
+ cmt->num_channels = hweight8(cfg->channels_mask);
cmt->channels = kzalloc(cmt->num_channels * sizeof(*cmt->channels),
GFP_KERNEL);
@@ -1045,35 +968,21 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
goto err_unmap;
}
- if (cmt->legacy) {
- ret = sh_cmt_setup_channel(&cmt->channels[0],
- cfg->timer_bit, cfg->timer_bit,
- cfg->clockevent_rating != 0,
- cfg->clocksource_rating != 0, cmt);
+ /*
+ * Use the first channel as a clock event device and the second channel
+ * as a clock source. If only one channel is available use it for both.
+ */
+ for (i = 0, mask = cfg->channels_mask; i < cmt->num_channels; ++i) {
+ unsigned int hwidx = ffs(mask) - 1;
+ bool clocksource = i == 1 || cmt->num_channels == 1;
+ bool clockevent = i == 0;
+
+ ret = sh_cmt_setup_channel(&cmt->channels[i], i, hwidx,
+ clockevent, clocksource, cmt);
if (ret < 0)
goto err_unmap;
- } else {
- unsigned int mask = hw_channels;
- unsigned int i;
- /*
- * Use the first channel as a clock event device and the second
- * channel as a clock source. If only one channel is available
- * use it for both.
- */
- for (i = 0; i < cmt->num_channels; ++i) {
- unsigned int hwidx = ffs(mask) - 1;
- bool clocksource = i == 1 || cmt->num_channels == 1;
- bool clockevent = i == 0;
-
- ret = sh_cmt_setup_channel(&cmt->channels[i], i, hwidx,
- clockevent, clocksource,
- cmt);
- if (ret < 0)
- goto err_unmap;
-
- mask &= ~(1 << hwidx);
- }
+ mask &= ~(1 << hwidx);
}
platform_set_drvdata(pdev, cmt);
@@ -1082,7 +991,7 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device *pdev)
err_unmap:
kfree(cmt->channels);
- sh_cmt_unmap_memory(cmt);
+ iounmap(cmt->mapbase);
err_clk_unprepare:
clk_unprepare(cmt->clk);
err_clk_put:
@@ -1135,7 +1044,6 @@ static int sh_cmt_remove(struct platform_device *pdev)
}
static const struct platform_device_id sh_cmt_id_table[] = {
- { "sh_cmt", 0 },
{ "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
{ "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },
--
1.8.3.2
More information about the linux-arm-kernel
mailing list