[PATCHv2 3/7] ARM: sun4i: dt: add pinmux configuration for the PWM

[Alexandre Belloni]

Add the pinctrl descriptions for both PWM channels of the Allwinner A10.

Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
---
 arch/arm/boot/dts/sun4i-a10.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 9174724571e2..109e796e4a69 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -477,6 +477,20 @@
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
+			pwm0_pins_a: pwm0 at 0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			pwm1_pins_a: pwm1 at 0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
 			uart0_pins_a: uart0 at 0 {
 				allwinner,pins = "PB22", "PB23";
 				allwinner,function = "uart0";
-- 
1.8.3.2