[PATCH v2 0/7] of: setup dma parameters using dma-ranges and dma-coherent

Rob Herring robherring2 at gmail.com
Mon Apr 21 08:35:17 PDT 2014


On Mon, Apr 21, 2014 at 10:13 AM, Santosh Shilimkar
<santosh.shilimkar at ti.com> wrote:
> Hi Rob,
>
> On Monday 21 April 2014 10:37 AM, Rob Herring wrote:
>> On Sat, Apr 19, 2014 at 9:32 AM, Santosh Shilimkar
>> <santosh.shilimkar at ti.com> wrote:
>>> Here is an updated version of [2] based on discussion. Series introduces
>>> support for setting up dma parameters based on device tree properties
>>> like 'dma-ranges' and 'dma-coherent' and also update to ARM 32 bit port.
>>> Earlier version of the same series is here [1].
>>>
>>> The 'dma-ranges' helps to take care of few DMAable system memory restrictions
>>> by use of dma_pfn_offset which we maintain now per device. Arch code then
>>> uses it for dma address translations for such cases. We update the
>>> dma_pfn_offset accordingly during DT the device creation process.The
>>> 'dma-coherent' property is used to setup arch's coherent dma_ops.
>>>
>>> After some off-list discussion with RMK and Arnd, I have now dropped the
>>> controversial dma_mask setup code from the series which actually isn't blocking
>>> me as such. Considering rest of the parts of the series are already aligned,
>>> am hoping to get this version merged for 3.16 merge window.
>>
>> Can you briefly describe what the h/w looks like in terms of addresses
>> for the problem you are trying to solve? Something like: Cpu view of
>> RAM is X to Y address, X corresponds to DMA address Z. Max DMA address
>> is ?
>>
> Let me try with say 8 GB RAM example
>
> CPU view of memory : 0x0000 0008 0000 0000 to 0x0000 000a 0000 0000
>
> From above memory range, first 2 GB of memory has an alias 32 bit
> view in the hardware. Hardware internally map the address issued within
> that first 2 GB to same memory.
>
> DMA view of first 2 GB [ 0x0000 0008 0000 0000 to 0x0000 0008 7fff ffff]
> is : 0x8000 0000 to 0xffff fffff.

Are you setting ZONE_DMA to be 2GB so allocations stay within DMAable
memory and that is enough that you don't need to set DMA masks?

Rob



More information about the linux-arm-kernel mailing list