[PATCH 2/4] ARM: at91/dt: define sam9x5 clocks
Alexandre Belloni
alexandre.belloni at free-electrons.com
Mon Apr 14 02:08:38 PDT 2014
On 14/04/2014 at 10:43:12 +0200, Boris Brezillon wrote :
> Define sam9x5 clocks in sam9x5 dt files and make use of them in peripheral
> definitions.
>
> Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
> ---
> arch/arm/boot/dts/at91sam9x5.dtsi | 355 ++++++++++++++++++++++++++++++-
> arch/arm/boot/dts/at91sam9x5_can.dtsi | 31 +++
> arch/arm/boot/dts/at91sam9x5_isi.dtsi | 26 +++
> arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 26 +++
> arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 11 +
> arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 11 +
> arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 11 +
> 7 files changed, 470 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/at91sam9x5_can.dtsi
> create mode 100644 arch/arm/boot/dts/at91sam9x5_isi.dtsi
> create mode 100644 arch/arm/boot/dts/at91sam9x5_lcd.dtsi
>
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index fc13c92..723daf6 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -14,6 +14,7 @@
> #include <dt-bindings/pinctrl/at91.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clk/at91.h>
>
> / {
> model = "Atmel AT91SAM9x5 family SoC";
> @@ -51,6 +52,24 @@
> reg = <0x20000000 0x10000000>;
> };
>
> + slow_xtal: slow_xtal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> +
> + main_xtal: main_xtal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> +
> + adc_op_clk: adc_op_clk{
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <5000000>;
> + };
> +
> ahb {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -77,8 +96,272 @@
> };
>
> pmc: pmc at fffffc00 {
> - compatible = "atmel,at91rm9200-pmc";
> + compatible = "atmel,at91sam9x5-pmc";
> reg = <0xfffffc00 0x100>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + interrupt-controller;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #interrupt-cells = <1>;
> +
> + main_rc_osc: main_rc_osc {
> + compatible = "atmel,at91sam9x5-clk-main-rc-osc";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
> + clock-frequency = <12000000>;
> + clock-accuracy = <50000000>;
> + };
> +
> + main_osc: main_osc {
> + compatible = "atmel,at91sam9x5-clk-main-osc";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_MOSCS>;
> + clocks = <&main_xtal>;
> + };
> +
> + main: mainck {
> + compatible = "atmel,at91sam9x5-clk-main";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
> + clocks = <&main_rc_osc>, <&main_osc>;
> + };
> +
> + plla: pllack {
> + compatible = "atmel,at91rm9200-clk-pll";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_LOCKA>;
> + clocks = <&main>;
> + reg = <0>;
> + atmel,clk-input-range = <2000000 32000000>;
> + #atmel,pll-clk-output-range-cells = <4>;
> + atmel,pll-clk-output-ranges = <745000000 800000000 0 0
> + 695000000 750000000 1 0
> + 645000000 700000000 2 0
> + 595000000 650000000 3 0
> + 545000000 600000000 0 1
> + 495000000 555000000 1 1
> + 445000000 500000000 1 2
> + 400000000 450000000 1 3>;
> + };
> +
> + plladiv: plladivck {
> + compatible = "atmel,at91sam9x5-clk-plldiv";
> + #clock-cells = <0>;
> + clocks = <&plla>;
> + };
> +
> + utmi: utmick {
> + compatible = "atmel,at91sam9x5-clk-utmi";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_LOCKU>;
> + clocks = <&main>;
> + };
> +
> + mck: masterck {
> + compatible = "atmel,at91sam9x5-clk-master";
> + #clock-cells = <0>;
> + interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
> + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
> + atmel,clk-output-range = <0 133333333>;
> + atmel,clk-divisors = <1 2 4 3>;
> + atmel,master-clk-have-div3-pres;
> + };
> +
> + usb: usbck {
> + compatible = "atmel,at91sam9x5-clk-usb";
> + #clock-cells = <0>;
> + clocks = <&plladiv>, <&utmi>;
> + };
> +
> + prog: progck {
> + compatible = "atmel,at91sam9x5-clk-programmable";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupt-parent = <&pmc>;
> + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
> +
> + prog0: prog0 {
> + #clock-cells = <0>;
> + reg = <0>;
> + interrupts = <AT91_PMC_PCKRDY(0)>;
> + };
> +
> + prog1: prog1 {
> + #clock-cells = <0>;
> + reg = <1>;
> + interrupts = <AT91_PMC_PCKRDY(1)>;
> + };
> + };
> +
> + smd: smdclk {
> + compatible = "atmel,at91sam9x5-clk-smd";
> + #clock-cells = <0>;
> + clocks = <&plladiv>, <&utmi>;
> + };
> +
> + systemck {
> + compatible = "atmel,at91rm9200-clk-system";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ddrck: ddrck {
> + #clock-cells = <0>;
> + reg = <2>;
> + clocks = <&mck>;
> + };
> +
> + smdck: smdck {
> + #clock-cells = <0>;
> + reg = <4>;
> + clocks = <&smd>;
> + };
> +
> + uhpck: uhpck {
> + #clock-cells = <0>;
> + reg = <6>;
> + clocks = <&usb>;
> + };
> +
> + udpck: udpck {
> + #clock-cells = <0>;
> + reg = <7>;
> + clocks = <&usb>;
> + };
> +
> + pck0: pck0 {
> + #clock-cells = <0>;
> + reg = <8>;
> + clocks = <&prog0>;
> + };
> +
> + pck1: pck1 {
> + #clock-cells = <0>;
> + reg = <9>;
> + clocks = <&prog1>;
> + };
> + };
> +
> + periphck {
> + compatible = "atmel,at91sam9x5-clk-peripheral";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&mck>;
> +
> + pioAB_clk: pioAB_clk {
> + #clock-cells = <0>;
> + reg = <2>;
> + };
> +
> + pioCD_clk: pioCD_clk {
> + #clock-cells = <0>;
> + reg = <3>;
> + };
> +
> + smd_clk: smd_clk {
> + #clock-cells = <0>;
> + reg = <4>;
> + };
> +
> + usart0_clk: usart0_clk {
> + #clock-cells = <0>;
> + reg = <5>;
> + };
> +
> + usart1_clk: usart1_clk {
> + #clock-cells = <0>;
> + reg = <6>;
> + };
> +
> + usart2_clk: usart2_clk {
> + #clock-cells = <0>;
> + reg = <7>;
> + };
> +
> + twi0_clk: twi0_clk {
> + reg = <9>;
> + #clock-cells = <0>;
> + };
> +
> + twi1_clk: twi1_clk {
> + #clock-cells = <0>;
> + reg = <10>;
> + };
> +
> + twi2_clk: twi2_clk {
> + #clock-cells = <0>;
> + reg = <11>;
> + };
> +
> + mci0_clk: mci0_clk {
> + #clock-cells = <0>;
> + reg = <12>;
> + };
> +
> + spi0_clk: spi0_clk {
> + #clock-cells = <0>;
> + reg = <13>;
> + };
> +
> + spi1_clk: spi1_clk {
> + #clock-cells = <0>;
> + reg = <14>;
> + };
> +
> + uart0_clk: uart0_clk {
> + #clock-cells = <0>;
> + reg = <15>;
> + };
> +
> + uart1_clk: uart1_clk {
> + #clock-cells = <0>;
> + reg = <16>;
> + };
> +
> + tcb0_clk: tcb0_clk {
> + #clock-cells = <0>;
> + reg = <17>;
> + };
> +
> + pwm_clk: pwm_clk {
> + #clock-cells = <0>;
> + reg = <18>;
> + };
> +
> + adc_clk: adc_clk {
> + #clock-cells = <0>;
> + reg = <19>;
> + };
> +
> + dma0_clk: dma0_clk {
> + #clock-cells = <0>;
> + reg = <20>;
> + };
> +
> + dma1_clk: dma1_clk {
> + #clock-cells = <0>;
> + reg = <21>;
> + };
> +
> + uhphs_clk: uhphs_clk {
> + #clock-cells = <0>;
> + reg = <22>;
> + };
> +
> + udphs_clk: udphs_clk {
> + #clock-cells = <0>;
> + reg = <23>;
> + };
> +
> + mci1_clk: mci1_clk {
> + #clock-cells = <0>;
> + reg = <26>;
> + };
> +
> + ssc0_clk: ssc0_clk {
> + #clock-cells = <0>;
> + reg = <28>;
> + };
> + };
> };
>
> rstc at fffffe00 {
> @@ -95,18 +378,47 @@
> compatible = "atmel,at91sam9260-pit";
> reg = <0xfffffe30 0xf>;
> interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&mck>;
> + };
> +
> + sckc at fffffe50 {
> + compatible = "atmel,at91sam9x5-sckc";
> + reg = <0xfffffe50 0x4>;
> +
> + slow_osc: slow_osc {
> + compatible = "atmel,at91sam9x5-clk-slow-osc";
> + #clock-cells = <0>;
> + clocks = <&slow_xtal>;
> + };
> +
> + slow_rc_osc: slow_rc_osc {
> + compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-accuracy = <50000000>;
> + };
> +
> + clk32k: slck {
> + compatible = "atmel,at91sam9x5-clk-slow";
> + #clock-cells = <0>;
> + clocks = <&slow_rc_osc>, <&slow_osc>;
> + };
> };
>
> tcb0: timer at f8008000 {
> compatible = "atmel,at91sam9x5-tcb";
> reg = <0xf8008000 0x100>;
> interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&tcb0_clk>;
> + clock-names = "t0_clk";
> };
>
> tcb1: timer at f800c000 {
> compatible = "atmel,at91sam9x5-tcb";
> reg = <0xf800c000 0x100>;
> interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&tcb0_clk>;
> + clock-names = "t0_clk";
> };
>
> dma0: dma-controller at ffffec00 {
> @@ -114,6 +426,8 @@
> reg = <0xffffec00 0x200>;
> interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
> #dma-cells = <2>;
> + clocks = <&dma0_clk>;
> + clock-names = "dma_clk";
> };
>
> dma1: dma-controller at ffffee00 {
> @@ -121,6 +435,8 @@
> reg = <0xffffee00 0x200>;
> interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
> #dma-cells = <2>;
> + clocks = <&dma1_clk>;
> + clock-names = "dma_clk";
> };
>
> pinctrl at fffff400 {
> @@ -453,6 +769,7 @@
> gpio-controller;
> interrupt-controller;
> #interrupt-cells = <2>;
> + clocks = <&pioAB_clk>;
> };
>
> pioB: gpio at fffff600 {
> @@ -464,6 +781,7 @@
> #gpio-lines = <19>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + clocks = <&pioAB_clk>;
> };
>
> pioC: gpio at fffff800 {
> @@ -474,6 +792,7 @@
> gpio-controller;
> interrupt-controller;
> #interrupt-cells = <2>;
> + clocks = <&pioCD_clk>;
> };
>
> pioD: gpio at fffffa00 {
> @@ -485,6 +804,7 @@
> #gpio-lines = <22>;
> interrupt-controller;
> #interrupt-cells = <2>;
> + clocks = <&pioCD_clk>;
> };
> };
>
> @@ -497,6 +817,8 @@
> dma-names = "tx", "rx";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
> + clocks = <&ssc0_clk>;
> + clock-names = "pclk";
> status = "disabled";
> };
>
> @@ -507,6 +829,8 @@
> dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
> dma-names = "rxtx";
> pinctrl-names = "default";
> + clocks = <&mci0_clk>;
> + clock-names = "mci_clk";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -519,6 +843,8 @@
> dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
> dma-names = "rxtx";
> pinctrl-names = "default";
> + clocks = <&mci1_clk>;
> + clock-names = "mci_clk";
> #address-cells = <1>;
> #size-cells = <0>;
> status = "disabled";
> @@ -530,6 +856,8 @@
> interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_dbgu>;
> + clocks = <&mck>;
> + clock-names = "usart";
> status = "disabled";
> };
>
> @@ -539,6 +867,8 @@
> interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usart0>;
> + clocks = <&usart0_clk>;
> + clock-names = "usart";
> status = "disabled";
> };
>
> @@ -548,6 +878,8 @@
> interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usart1>;
> + clocks = <&usart1_clk>;
> + clock-names = "usart";
> status = "disabled";
> };
>
> @@ -557,6 +889,8 @@
> interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usart2>;
> + clocks = <&usart2_clk>;
> + clock-names = "usart";
> status = "disabled";
> };
>
> @@ -571,6 +905,7 @@
> #size-cells = <0>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c0>;
> + clocks = <&twi0_clk>;
> status = "disabled";
> };
>
> @@ -585,6 +920,7 @@
> #size-cells = <0>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c1>;
> + clocks = <&twi1_clk>;
> status = "disabled";
> };
>
> @@ -599,6 +935,7 @@
> #size-cells = <0>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c2>;
> + clocks = <&twi2_clk>;
> status = "disabled";
> };
>
> @@ -608,6 +945,8 @@
> interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_uart0>;
> + clocks = <&uart0_clk>;
> + clock-names = "usart";
> status = "disabled";
> };
>
> @@ -617,6 +956,8 @@
> interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_uart1>;
> + clocks = <&uart1_clk>;
> + clock-names = "usart";
> status = "disabled";
> };
>
> @@ -626,6 +967,9 @@
> compatible = "atmel,at91sam9260-adc";
> reg = <0xf804c000 0x100>;
> interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&adc_clk>,
> + <&adc_op_clk>;
> + clock-names = "adc_clk", "adc_op_clk";
> atmel,adc-use-external-triggers;
> atmel,adc-channels-used = <0xffff>;
> atmel,adc-vref = <3300>;
> @@ -673,6 +1017,8 @@
> dma-names = "tx", "rx";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_spi0>;
> + clocks = <&spi0_clk>;
> + clock-names = "spi_clk";
> status = "disabled";
> };
>
> @@ -687,6 +1033,8 @@
> dma-names = "tx", "rx";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_spi1>;
> + clocks = <&spi1_clk>;
> + clock-names = "spi_clk";
> status = "disabled";
> };
>
> @@ -805,6 +1153,9 @@
> compatible = "atmel,at91rm9200-ohci", "usb-ohci";
> reg = <0x00600000 0x100000>;
> interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
> + clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
> + <&uhpck>;
> + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
> status = "disabled";
> };
>
> @@ -812,6 +1163,8 @@
> compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
> reg = <0x00700000 0x100000>;
> interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
> + clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
> + clock-names = "usb_clk", "ehci_clk", "uhpck";
> status = "disabled";
> };
> };
> diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
> new file mode 100644
> index 0000000..f44ab77
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
> @@ -0,0 +1,31 @@
> +/*
> + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
> + * Ethernet interface.
> + *
> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
> + *
> + * Licensed under GPLv2.
> + */
> +
> +#include <dt-bindings/pinctrl/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + ahb {
> + apb {
> + pmc: pmc at fffffc00 {
> + periphck {
> + can0_clk: can0_clk {
> + #clock-cells = <0>;
> + reg = <29>;
> + };
> +
> + can1_clk: can1_clk {
> + #clock-cells = <0>;
> + reg = <30>;
> + };
> + };
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
> new file mode 100644
> index 0000000..98bc877
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
> @@ -0,0 +1,26 @@
> +/*
> + * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
> + * Image Sensor Interface.
> + *
> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
> + *
> + * Licensed under GPLv2.
> + */
> +
> +#include <dt-bindings/pinctrl/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + ahb {
> + apb {
> + pmc: pmc at fffffc00 {
> + periphck {
> + isi_clk: isi_clk {
> + #clock-cells = <0>;
> + reg = <25>;
> + };
> + };
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
> new file mode 100644
> index 0000000..485302e
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
> @@ -0,0 +1,26 @@
> +/*
> + * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
> + * LCD controller.
> + *
> + * Copyright (C) 2013 Boris BREZILLON <b.brezillon at overkiz.com>
> + *
> + * Licensed under GPLv2.
> + */
> +
> +#include <dt-bindings/pinctrl/at91.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + ahb {
> + apb {
> + pmc: pmc at fffffc00 {
> + periphck {
> + lcdc_clk: lcdc_clk {
> + #clock-cells = <0>;
> + reg = <25>;
> + };
> + };
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
> index 55731ff..57e89d1 100644
> --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
> @@ -43,12 +43,23 @@
> };
> };
>
> + pmc: pmc at fffffc00 {
> + periphck {
> + macb0_clk: macb0_clk {
> + #clock-cells = <0>;
> + reg = <24>;
> + };
> + };
> + };
> +
> macb0: ethernet at f802c000 {
> compatible = "cdns,at32ap7000-macb", "cdns,macb";
> reg = <0xf802c000 0x100>;
> interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_macb0_rmii>;
> + clocks = <&macb0_clk>, <&macb0_clk>;
> + clock-names = "hclk", "pclk";
> status = "disabled";
> };
> };
> diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
> index 77425a6..663676c 100644
> --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
> @@ -31,12 +31,23 @@
> };
> };
>
> + pmc: pmc at fffffc00 {
> + periphck {
> + macb1_clk: macb1_clk {
> + #clock-cells = <0>;
> + reg = <27>;
> + };
> + };
> + };
> +
> macb1: ethernet at f8030000 {
> compatible = "cdns,at32ap7000-macb", "cdns,macb";
> reg = <0xf8030000 0x100>;
> interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_macb1_rmii>;
> + clocks = <&macb1_clk>, <&macb1_clk>;
> + clock-names = "hclk", "pclk";
> status = "disabled";
> };
> };
> diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
> index 6801106..140217a5 100644
> --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
> @@ -42,12 +42,23 @@
> };
> };
>
> + pmc: pmc at fffffc00 {
> + periphck {
> + usart3_clk: usart3_clk {
> + #clock-cells = <0>;
> + reg = <8>;
> + };
> + };
> + };
> +
> usart3: serial at f8028000 {
> compatible = "atmel,at91sam9260-usart";
> reg = <0xf8028000 0x200>;
> interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usart3>;
> + clocks = <&usart3_clk>;
> + clock-names = "usart";
> status = "disabled";
> };
> };
> --
> 1.8.3.2
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
More information about the linux-arm-kernel
mailing list