[PATCH v2 14/38] ARM: orion5x: add node labels in Orion5x SoC Device Tree file
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Wed Apr 23 04:22:25 PDT 2014
On 04/22/2014 11:26 PM, Thomas Petazzoni wrote:
> In order to ease identification of devices, it is useful to have
> Device Tree labels on all devices. This commit adds such labels to the
> Orion5x SoC Device Tree file.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Oh, nice one :)
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
> ---
> arch/arm/boot/dts/orion5x.dtsi | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
> index 31d46e6..aef5d17 100644
> --- a/arch/arm/boot/dts/orion5x.dtsi
> +++ b/arch/arm/boot/dts/orion5x.dtsi
> @@ -41,7 +41,7 @@
> interrupts = <6>, <7>, <8>, <9>;
> };
>
> - spi at 10600 {
> + spi: spi at 10600 {
> compatible = "marvell,orion-spi";
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -50,7 +50,7 @@
> status = "disabled";
> };
>
> - i2c at 11000 {
> + i2c: i2c at 11000 {
> compatible = "marvell,mv64xxx-i2c";
> reg = <0x11000 0x20>;
> #address-cells = <1>;
> @@ -60,7 +60,7 @@
> status = "disabled";
> };
>
> - serial at 12000 {
> + uart0: serial at 12000 {
> compatible = "ns16550a";
> reg = <0x12000 0x100>;
> reg-shift = <2>;
> @@ -69,7 +69,7 @@
> status = "disabled";
> };
>
> - serial at 12100 {
> + uart1: serial at 12100 {
> compatible = "ns16550a";
> reg = <0x12100 0x100>;
> reg-shift = <2>;
> @@ -85,20 +85,20 @@
> reg = <0x20200 0x08>;
> };
>
> - wdt at 20300 {
> + wdt: wdt at 20300 {
> compatible = "marvell,orion-wdt";
> reg = <0x20300 0x28>;
> status = "okay";
> };
>
> - ehci at 50000 {
> + ehci0: ehci at 50000 {
> compatible = "marvell,orion-ehci";
> reg = <0x50000 0x1000>;
> interrupts = <17>;
> status = "disabled";
> };
>
> - xor at 60900 {
> + xor: xor at 60900 {
> compatible = "marvell,orion-xor";
> reg = <0x60900 0x100
> 0x60b00 0x100>;
> @@ -125,7 +125,7 @@
> marvell,tx-checksum-limit = <1600>;
> status = "disabled";
>
> - ethernet-port at 0 {
> + ethport: ethernet-port at 0 {
> compatible = "marvell,orion-eth-port";
> reg = <0>;
> /* overwrite MAC address in bootloader */
> @@ -145,14 +145,14 @@
> /* add phy nodes in board file */
> };
>
> - sata at 80000 {
> + sata: sata at 80000 {
> compatible = "marvell,orion-sata";
> reg = <0x80000 0x5000>;
> interrupts = <29>;
> status = "disabled";
> };
>
> - ehci at a0000 {
> + ehci1: ehci at a0000 {
> compatible = "marvell,orion-ehci";
> reg = <0xa0000 0x1000>;
> interrupts = <12>;
> @@ -160,7 +160,7 @@
> };
> };
>
> - crypto at 90000 {
> + cesa: crypto at 90000 {
> compatible = "marvell,orion-crypto";
> reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
> <MBUS_ID(0x09, 0x00) 0x0 0x800>;
>
More information about the linux-arm-kernel
mailing list