[PATCH v2 14/38] ARM: orion5x: add node labels in Orion5x SoC Device Tree file

[Thomas Petazzoni]

In order to ease identification of devices, it is useful to have
Device Tree labels on all devices. This commit adds such labels to the
Orion5x SoC Device Tree file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 arch/arm/boot/dts/orion5x.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 31d46e6..aef5d17 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -41,7 +41,7 @@
 				interrupts = <6>, <7>, <8>, <9>;
 			};
 
-			spi at 10600 {
+			spi: spi at 10600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -50,7 +50,7 @@
 				status = "disabled";
 			};
 
-			i2c at 11000 {
+			i2c: i2c at 11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
@@ -60,7 +60,7 @@
 				status = "disabled";
 			};
 
-			serial at 12000 {
+			uart0: serial at 12000 {
 				compatible = "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
@@ -69,7 +69,7 @@
 				status = "disabled";
 			};
 
-			serial at 12100 {
+			uart1: serial at 12100 {
 				compatible = "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
@@ -85,20 +85,20 @@
 				reg = <0x20200 0x08>;
 			};
 
-			wdt at 20300 {
+			wdt: wdt at 20300 {
 				compatible = "marvell,orion-wdt";
 				reg = <0x20300 0x28>;
 				status = "okay";
 			};
 
-			ehci at 50000 {
+			ehci0: ehci at 50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x1000>;
 				interrupts = <17>;
 				status = "disabled";
 			};
 
-			xor at 60900 {
+			xor: xor at 60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -125,7 +125,7 @@
 				marvell,tx-checksum-limit = <1600>;
 				status = "disabled";
 
-				ethernet-port at 0 {
+				ethport: ethernet-port at 0 {
 					compatible = "marvell,orion-eth-port";
 					reg = <0>;
 					/* overwrite MAC address in bootloader */
@@ -145,14 +145,14 @@
 				/* add phy nodes in board file */
 			};
 
-			sata at 80000 {
+			sata: sata at 80000 {
 				compatible = "marvell,orion-sata";
 				reg = <0x80000 0x5000>;
 				interrupts = <29>;
 				status = "disabled";
 			};
 
-			ehci at a0000 {
+			ehci1: ehci at a0000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0xa0000 0x1000>;
 				interrupts = <12>;
@@ -160,7 +160,7 @@
 			};
 		};
 
-		crypto at 90000 {
+		cesa: crypto at 90000 {
 			compatible = "marvell,orion-crypto";
 			reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
 			      <MBUS_ID(0x09, 0x00) 0x0 0x800>;
-- 
1.9.2