[PATCH 06/23] ARM: OMAP: add OMAP5 DSI muxing

[Tomi Valkeinen]

On 29/04/14 20:38, Tony Lindgren wrote:
> * Tomi Valkeinen <tomi.valkeinen at ti.com> [140429 09:33]:
>> On 29/04/14 19:19, Tomi Valkeinen wrote:
>>> On 29/04/14 18:05, Tony Lindgren wrote:
>>>
>>>>> omap4_padconf_global is a syscon node, not pinctrl. As syscon just gives
>>>>> a raw regmap to its memory area, the driver needs to know about the OMAP
>>>>> control registers to use it.
>>>>
>>>> That would be probably best set up the same way we have already set up
>>>> for example omap4_padconf_global: tisyscon at 4a1005a0. Then drivers can
>>>> access it using regmap, see how drivers/regulator/pbias-regulator.c
>>>> sets up the pbias regulator with regmap for MMC.
>>>
>>> Right, but it means that the driver will contain platform specific code
>>> for all the omap revisions it supports. Isn't that wrong?
>>>
>>> I already have a patch for DSI that uses the syscon-method, and it works
>>> fine. But it's quite ugly, imo, to fiddle with the OMAP control
>>> registers in a driver.
> 
> Anything using the system control module registers should be a separate
> driver. And it should ideally be implemeting some Linux generic framework
> that the consumer driver can then use. That leaves out the need to export
> custom functions.

Ok.

> I guess we don't have a PHY framework for displays though, so how about
> just a separate minimal driver under drivers/video/omap2 that uses the
> syscon?

Well, this one is not really about DSI PHY. The CONTROL_DSIPHY register
is not in the DSI PHY block, but in the control module, and it is used
to enable/disable the pins (for omap4/5) and to set pull up/down for the
pins (only for omap4). Oddly, for omap5, there's also a normal padconfig
register for the DSI pins, but not so for omap4.

To me it looks like a pad config register. I don't know why there's a
separate odd register for it and it's not using the normal padconfig system.

I'd like to use the pinctrl framework for it, but the pinctrl-single
cannot handle such a funny register. So, if "Anything using the system
control module registers should be a separate driver", then I guess I
need to write a pinctrl driver for this single register?

>> Oh, also, if I do that, I need to know both the SoC version and the DSS
>> version in the driver.
> 
> Don't you get all you need in the compatible string? Something like
> compatible ti,dss-phy-omap5?

We do use different compatible strings for different major versions of
the DSS blocks, like ti,omap5-dsi. But that exactly same DSS block could
be used on some other SoC, with different control stuff.

We could use separate compatible string for each SoC that uses DSS, but
then we're really encoding the SoC version into the compatible string,
not DSS version.

Of course, if there will be a separate driver managing the
CONTROL_DSIPHY register, then that one should use compatible string
specific to the SoC, as it's not a DSS driver at all.

 Tomi


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140430/e2251baa/attachment.sig>