[PATCH v2 6/7] Documentation: add the Marvell Berlin pinctrl documentation

[Sebastian Hesselbarth]

On 04/23/2014 05:51 PM, Antoine Ténart wrote:
> Add the documentation related to the Berlin pin-controller driver and
> explain how to configure this group based controller.
> 
> Signed-off-by: Antoine Ténart <antoine.tenart at free-electrons.com>
> ---
>  .../bindings/pinctrl/marvell,berlin-pinctrl.txt    | 44 ++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,berlin-pinctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,berlin-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,berlin-pinctrl.txt
> new file mode 100644
> index 000000000000..c59671ac6b54
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/marvell,berlin-pinctrl.txt
> @@ -0,0 +1,44 @@
> +* Pin-controller driver for the Marvell Berlin SoCs
> +
> +The pins controlled by the Marvell Berlin controller are organized in groups.
> +Configuration is done by group, so no actual pin information is needed.
> +
> +Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called
> +a 'function' in the pin-controller subsystem.
> +
> +Required properties:
> +- compatible: should be one of: "marvell,berlin2-soc-pinctrl",

nit: add the line break right after "one of:".

> +				"marvell,berlin2-sysmgr-pinctrl",
> +				"marvell,berlin2cd-soc-pinctrl",
> +				"marvell,berlin2cd-sysmgr-pinctrl",
> +				"marvell,berlin2q-soc-pinctrl"
> +				"marvell,berlin2q-sysmgr-pinctrl"
> +- reg: registers physical address and length of the pin controller.
> +
> +Please refer to pinctrl-bindings.txt in this directory for details of the
> +common pin-controller bindings used by client devices.
> +
> +A pin-controller node should contain subnodes representing the pin group
> +configurations, one per group. Each subnode has the group name and the muxing

",one per group" isn't correct, is it? You can have one subnode with
more than one group, like in your example below.

Sebastian

> +function used.
> +
> +Required subnode-properties:
> +- marvell,groups: a list of strings describing the group names.
> +- marvell,function: a string describing the function used to mux the groups.
> +
> +Example:
> +
> +sm_pinctrl: pin-controller at 0 {
> +	compatible = "marvell,berlin2q-sysmgr-pinctrl";
> +	reg = <0xfc0000 0x44>;
> +
> +	uart0_pmux: uart0-pmux {
> +		marvell,groups = "GSM12", "GSM13";
> +		marvell,function = "uart0";
> +	};
> +}
> +
> +&uart0 {
> +	pinctrl-0 = <&uart0_pmux>;
> +	pinctrl-names = "default";
> +};
>