[PATCH v2] ARM: dts: imx6qdl-sabresd: Add HDMI support

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at freescale.com>

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Shawn,

I currently do not have hardware access, so I did not test this one.

It is based on the previous version that I submitted and tested.

Changes since v1:
- Rebased against 3.15-rc1

 arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 7a88d9a..3d88712 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -148,6 +148,14 @@
 	status = "okay";
 };
 
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+	crtcs = <&ipu1 1>;
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -390,6 +398,13 @@
 			>;
 		};
 
+
+		pinctrl_hdmi: hdmigrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-- 
1.8.3.2