[PATCH 1/5] ASoC: alc5623: Add device tree binding

[Andrew Lunn]

On Fri, Apr 18, 2014 at 05:33:51PM +0100, Mark Brown wrote:
> On Thu, Apr 17, 2014 at 05:53:10PM +0200, Andrew Lunn wrote:
> 
> > + - compatible:	"realtek,alc5623"
> 
> You've not added an ID table to the driver for this.

The driver already has:

static const struct i2c_device_id alc5623_i2c_table[] = {
        {"alc5621", 0x21},
        {"alc5622", 0x22},
        {"alc5623", 0x23},
        {}
};
MODULE_DEVICE_TABLE(i2c, alc5623_i2c_table);

which is enough for the i2c layer to load the driver when it walks the
nodes under the i2c bus driver in the DT.

> > +  - add-ctrl:	Default register value for Reg-40h, Additional Control Register.
> > +		If absent, the default is 0.
> 
> > +  - jack-det-ctrl:	Default register value for Reg-5Ah, Jack Detect
> > +			Control Register. If absent, the default is 0.
> 
> I would expect the default for these to be to leave the hardware
> defaults untouched - why is it different, what does setting to zero mean?

The description is wrong. I will fix it. If the property is absent, or
the value is zero, the register is left alone.

    Andrew