[PATCH 25/38] mmc: sdhci: clean up sdhci_execute_tuning() decision
Russell King
rmk+kernel at arm.linux.org.uk
Wed Apr 23 12:08:18 PDT 2014
Clean up the code in sdhci_execute_tuning() so the decision whether
to execute tuning is clearer - and despite this reflecting what the
original code was doing, it shows that it may not be what the author
actually intended.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
drivers/mmc/host/sdhci.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5f067a040ec4..c1bd77e17458 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1806,21 +1806,16 @@ static int sdhci_card_busy(struct mmc_host *mmc)
static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
- struct sdhci_host *host;
+ struct sdhci_host *host = mmc_priv(mmc);
u16 ctrl;
int tuning_loop_counter = MAX_TUNING_LOOP;
unsigned long timeout;
int err = 0;
- bool requires_tuning_nonuhs = false;
unsigned long flags;
- host = mmc_priv(mmc);
-
sdhci_runtime_pm_get(host);
spin_lock_irqsave(&host->lock, flags);
- ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
/*
* The Host Controller needs tuning only in case of SDR104 mode
* and for SDR50 mode when Use Tuning for SDR50 is set in the
@@ -1828,16 +1823,18 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
* If the Host Controller supports the HS200 mode then the
* tuning function has to be executed.
*/
- if (host->timing == MMC_TIMING_UHS_SDR50 &&
- (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
- host->flags & SDHCI_SDR104_NEEDS_TUNING))
- requires_tuning_nonuhs = true;
-
- if (host->timing == MMC_TIMING_MMC_HS200 ||
- host->timing == MMC_TIMING_UHS_SDR104 ||
- requires_tuning_nonuhs)
- ctrl |= SDHCI_CTRL_EXEC_TUNING;
- else {
+ switch (host->timing) {
+ case MMC_TIMING_MMC_HS200:
+ case MMC_TIMING_UHS_SDR104:
+ break;
+
+ case MMC_TIMING_UHS_SDR50:
+ if (host->flags & SDHCI_SDR50_NEEDS_TUNING ||
+ host->flags & SDHCI_SDR104_NEEDS_TUNING)
+ break;
+ /* FALLTHROUGH */
+
+ default:
spin_unlock_irqrestore(&host->lock, flags);
sdhci_runtime_pm_put(host);
return 0;
@@ -1850,6 +1847,8 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
return err;
}
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl |= SDHCI_CTRL_EXEC_TUNING;
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
/*
--
1.8.3.1
More information about the linux-arm-kernel
mailing list