[PATCH] ARM: i.MX6: Add OF configuration support for ksz9031

[Hubert Chaumette]

Adds support for ksz9031 PAD skew configuration over devicetree.

Changes since v1:
- Removed ksz9021 and ksz9031 fixup deletions from arch/arm/mach-imx/mach-imx6q.c

Signed-off-by: Hubert Chaumette <hchaumette at adeneo-embedded.com>
---
 drivers/net/phy/micrel.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 184 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 5a8993b..df56b26 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -242,6 +242,189 @@ static int ksz9021_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+#define MII_KSZ9031RN_MMD_CTRL_REG	0x0d
+#define MII_KSZ9031RN_MMD_REGDATA_REG	0x0e
+#define OP_DATA				1
+#define KSZ9031_PS_TO_REG		60
+
+/* Extended registers */
+#define MII_KSZ9031RN_CONTROL_PAD_SKEW	4
+#define MII_KSZ9031RN_RX_DATA_PAD_SKEW	5
+#define MII_KSZ9031RN_TX_DATA_PAD_SKEW	6
+#define MII_KSZ9031RN_CLK_PAD_SKEW	8
+
+static int ksz9031_extended_write(struct phy_device *phydev,
+				  u8 mode, u32 dev_addr, u32 regnum, u16 val)
+{
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+	phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+	return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
+}
+
+static int ksz9031_extended_read(struct phy_device *phydev,
+				 u8 mode, u32 dev_addr, u32 regnum)
+{
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+	phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+	phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+	return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
+}
+
+/* Two 5-bit fields register */
+static int ksz9031_load_clk_skew_values(struct phy_device *phydev,
+					struct device_node *of_node,
+					char *field1, char *field2)
+{
+	int val1 = -1;
+	int val2 = -2;
+	int newval;
+	int matches = 0;
+
+	if (!of_property_read_u32(of_node, field1, &val1))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field2, &val2))
+		matches++;
+
+	if (!matches)
+		return 0;
+
+	if (matches < 2)
+		newval = ksz9031_extended_read(phydev, OP_DATA, 2,
+				MII_KSZ9031RN_CLK_PAD_SKEW);
+	else
+		newval = 0;
+
+	if (val1 != -1)
+		newval = (newval & 0xffe0) |
+			 ((val1 / KSZ9031_PS_TO_REG) & 0x1f);
+
+	if (val2 != -2)
+		newval = (newval & 0xfc1f) |
+			 (((val2 / KSZ9031_PS_TO_REG) & 0x1f) << 5);
+
+	return ksz9031_extended_write(phydev, OP_DATA, 2,
+			MII_KSZ9031RN_CLK_PAD_SKEW, newval);
+}
+
+/* Four 4-bit fields register */
+static int ksz9031_load_data_skew_values(struct phy_device *phydev,
+					 struct device_node *of_node, u16 reg,
+					 char *field1, char *field2,
+					 char *field3, char *field4)
+{
+	int val1 = -1;
+	int val2 = -2;
+	int val3 = -3;
+	int val4 = -4;
+	int newval;
+	int matches = 0;
+
+	if (!of_property_read_u32(of_node, field1, &val1))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field2, &val2))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field3, &val3))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field4, &val4))
+		matches++;
+
+	if (!matches)
+		return 0;
+
+	if (matches < 4)
+		newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+	else
+		newval = 0;
+
+	if (val1 != -1)
+		newval = (newval & 0xfff0) |
+			 (((val1 / KSZ9031_PS_TO_REG) & 0xf) << 0);
+
+	if (val2 != -2)
+		newval = (newval & 0xff0f) |
+			 (((val2 / KSZ9031_PS_TO_REG) & 0xf) << 4);
+
+	if (val3 != -3)
+		newval = (newval & 0xf0ff) |
+			 (((val3 / KSZ9031_PS_TO_REG) & 0xf) << 8);
+
+	if (val4 != -4)
+		newval = (newval & 0x0fff) |
+			 (((val4 / KSZ9031_PS_TO_REG) & 0xf) << 12);
+
+	return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+/* Two 4-bit fields register */
+static int ksz9031_load_ctrl_skew_values(struct phy_device *phydev,
+					 struct device_node *of_node,
+					 char *field1, char *field2)
+{
+	int val1 = -1;
+	int val2 = -2;
+	int newval;
+	int matches = 0;
+
+	if (!of_property_read_u32(of_node, field1, &val1))
+		matches++;
+
+	if (!of_property_read_u32(of_node, field2, &val2))
+		matches++;
+
+	if (!matches)
+		return 0;
+
+	if (matches < 2)
+		newval = ksz9031_extended_read(phydev, OP_DATA, 2,
+				MII_KSZ9031RN_CONTROL_PAD_SKEW);
+	else
+		newval = 0;
+
+	if (val1 != -1)
+		newval = (newval & 0xfff0) |
+			 (((val1 / KSZ9031_PS_TO_REG) & 0xf) << 0);
+
+	if (val2 != -2)
+		newval = (newval & 0xff0f) |
+			 (((val2 / KSZ9031_PS_TO_REG) & 0xf) << 4);
+
+	return ksz9031_extended_write(phydev, OP_DATA, 2,
+			MII_KSZ9031RN_CONTROL_PAD_SKEW, newval);
+}
+
+static int ksz9031_config_init(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->dev;
+	struct device_node *of_node = dev->of_node;
+
+	if (!of_node && dev->parent->of_node)
+		of_node = dev->parent->of_node;
+
+	if (of_node) {
+		ksz9031_load_clk_skew_values(phydev, of_node,
+				"rxc-skew-ps", "txc-skew-ps");
+
+		ksz9031_load_data_skew_values(phydev, of_node,
+				MII_KSZ9031RN_RX_DATA_PAD_SKEW,
+				"rxd0-skew-ps", "rxd1-skew-ps",
+				"rxd2-skew-ps", "rxd3-skew-ps");
+
+		ksz9031_load_data_skew_values(phydev, of_node,
+				MII_KSZ9031RN_TX_DATA_PAD_SKEW,
+				"txd0-skew-ps", "txd1-skew-ps",
+				"txd2-skew-ps", "txd3-skew-ps");
+
+		ksz9031_load_ctrl_skew_values(phydev, of_node,
+				"txen-skew-ps", "rxdv-skew-ps");
+	}
+	return 0;
+}
+
 #define KSZ8873MLL_GLOBAL_CONTROL_4	0x06
 #define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX	(1 << 6)
 #define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED	(1 << 4)
@@ -428,7 +611,7 @@ static struct phy_driver ksphy_driver[] = {
 	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
-	.config_init	= kszphy_config_init,
+	.config_init	= ksz9031_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
-- 
1.9.2