[PATCH 1/3] ARM: dts: Add PMU reg node to exynos4210
Vikas Sajjan
sajjan.linux at gmail.com
Thu Apr 24 04:59:57 PDT 2014
+Tomasz
On Wed, Apr 2, 2014 at 1:32 PM, Pankaj Dubey <pankaj.dubey at samsung.com> wrote:
> This patch adds pmu regnode to exynos4210 dtsi to handle
> PMU register access via DT.
>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> ---
> arch/arm/boot/dts/exynos4210.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> index cacf614..0a2c0fe 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -81,6 +81,11 @@
> interrupts = <2 2>, <3 2>;
> };
>
> + pmu_system_controller: system-controller at 10020000 {
> + compatible = "samsung,exynos4210-pmu", "syscon";
> + reg = <0x10020000 0x5000>;
Can we have 2 strings as "compatible" and these 2 strings are used by
2 different driver?
Because once syscon driver gets probed, exynos-pmu.c [1] driver will
never be probed.
The new PMU driver [1] completely relies on this. With just
exynos_defconfig, you will not notice this issue, since syscon is NOT
enabled by exynos_defconfig. When I enabled "System Controller
Register R/W Based on Regmap" in menuconfig, I could see PMU driver
[1] is NEVER probed.
Let me know, if I am missing something.
[1] http://www.spinics.net/lists/arm-kernel/msg319750.html
> + };
> +
> pinctrl_0: pinctrl at 11400000 {
> compatible = "samsung,exynos4210-pinctrl";
> reg = <0x11400000 0x1000>;
> --
> 1.7.10.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list