[PATCH 1/2] ARM: tegra: add Jetson TK1 device tree

[Stephen Warren]

On 03/25/2014 11:43 AM, Stephen Warren wrote:
> From: Stephen Warren <swarren at nvidia.com>
> 
> Jetson TK1 is an NVIDIA Tegra124 development board, containing Tegra124,
> 2GB RAM, eMMC, SD card, SPI flash, serial port, PCIe Ethernet, HDMI,
> audio, mini PCIe, JTAG, SATA, and an expansion IO connector containing
> GPIOs, I2C, SPI, CSI, eDP, etc.
> 
> The following features work with this device tree: UART, SD card, eMMC,
> SPI flash, USB (full-size jack, and mini-PCIe), audio, AS3722 RTC, system
> power-off, suspend/resume (LP1) with wake via RTC alarm.
> 
> The following features should work with this device tree, but are not
> validated: Expansion I2C, expansion SPI, expansion GPIO, gpio-key for the
> power button.
> 
> The following features are not yet implemented in this device tree: Most
> voltage regulators, expansion UART, HDMI, eDP, PCIe (Ethernet, and mini-
> PCIe connector), CSI, SATA.

I have applied these, patch 1/2 to Tegra's for-3.16/dt branch, and patch
2/2 to Tegra's for-3.16/defconfig branch.