[PATCH 093/222] net:fec: quiesce packet processing when taking link down in fec_enet_adjust_link()

[Russell King]

When the link goes down, the adjust_link method will be called, but
there is no synchronisation to ensure that we won't be processing some
last remaining packets while performing a reset of the device.

Add the necessary synchronisation to ensure that packet processing
is complete before we stop and reset the FEC.

Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
 drivers/net/ethernet/freescale/fec_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index c5a5a0aedf21..6156d423a6a9 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1226,7 +1226,11 @@ static void fec_enet_adjust_link(struct net_device *ndev)
 		}
 	} else {
 		if (fep->link) {
+			napi_disable(&fep->napi);
+			netif_tx_lock_bh(ndev);
 			fec_stop(ndev);
+			netif_tx_unlock_bh(ndev);
+			napi_enable(&fep->napi);
 			fep->link = phy_dev->link;
 			status_change = 1;
 		}
-- 
1.8.3.1