[PATCH 20/23] OMAPDSS: HDMI: PHY changes for OMAP5

[Tomi Valkeinen]

From: Archit Taneja <archit at ti.com>

OMAP5 HDMI PHY has some differences compared to OMAP4 HDMI PHY. This
patch creates a features struct which help the driver configure the PHY
based on what SoC it is.

Some of the features aren't currenlty used, but will come in use later.

Signed-off-by: Archit Taneja <archit at ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
 drivers/video/fbdev/omap2/dss/hdmi.h     |  1 +
 drivers/video/fbdev/omap2/dss/hdmi_phy.c | 95 +++++++++++++++++++++++++++++++-
 2 files changed, 94 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index 0e5979ef933c..1819f93cd49e 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
@@ -80,6 +80,7 @@
 #define HDMI_TXPHY_DIGITAL_CTRL			0x4
 #define HDMI_TXPHY_POWER_CTRL			0x8
 #define HDMI_TXPHY_PAD_CFG_CTRL			0xC
+#define HDMI_TXPHY_BIST_CONTROL			0x1C
 
 enum hdmi_pll_pwr {
 	HDMI_PLLPWRCMD_ALLOFF = 0,
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
index 8d13e422de5e..2614cf9dafb0 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_phy.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
@@ -12,11 +12,22 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <video/omapdss.h>
 
 #include "dss.h"
 #include "hdmi.h"
 
+struct hdmi_phy_features {
+	bool bist_ctrl;
+	bool calc_freqout;
+	bool ldo_voltage;
+	unsigned long dcofreq_min;
+	unsigned long max_phy;
+};
+
+static const struct hdmi_phy_features *phy_feat;
+
 void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
 {
 #define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\
@@ -26,6 +37,8 @@ void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
 	DUMPPHY(HDMI_TXPHY_DIGITAL_CTRL);
 	DUMPPHY(HDMI_TXPHY_POWER_CTRL);
 	DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
+	if (phy_feat->bist_ctrl)
+		DUMPPHY(HDMI_TXPHY_BIST_CONTROL);
 }
 
 int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes)
@@ -121,6 +134,8 @@ static void hdmi_phy_configure_lanes(struct hdmi_phy_data *phy)
 
 int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg)
 {
+	u8 freqout;
+
 	/*
 	 * Read address 0 in order to get the SCP reset done completed
 	 * Dummy access performed to make sure reset is done
@@ -128,16 +143,39 @@ int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg)
 	hdmi_read_reg(phy->base, HDMI_TXPHY_TX_CTRL);
 
 	/*
+	 * In OMAP5+, the HFBITCLK must be divided by 2 before issuing the
+	 * HDMI_PHYPWRCMD_LDOON command.
+	*/
+	if (phy_feat->bist_ctrl)
+		REG_FLD_MOD(phy->base, HDMI_TXPHY_BIST_CONTROL, 1, 11, 11);
+
+	if (phy_feat->calc_freqout) {
+		/* DCOCLK/10 is pixel clock, compare pclk with DCOCLK_MIN/10 */
+		u32 dco_min = phy_feat->dcofreq_min / 10;
+		u32 pclk = cfg->timings.pixelclock;
+
+		if (pclk < dco_min)
+			freqout = 0;
+		else if ((pclk >= dco_min) && (pclk < phy_feat->max_phy))
+			freqout = 1;
+		else
+			freqout = 2;
+	} else {
+		freqout = 1;
+	}
+
+	/*
 	 * Write to phy address 0 to configure the clock
 	 * use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
 	 */
-	REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
+	REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, freqout, 31, 30);
 
 	/* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
 	hdmi_write_reg(phy->base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
 
 	/* Setup max LDO voltage */
-	REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
+	if (phy_feat->ldo_voltage)
+		REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
 
 	hdmi_phy_configure_lanes(phy);
 
@@ -147,11 +185,64 @@ int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg)
 #define PHY_OFFSET	0x300
 #define PHY_SIZE	0x100
 
+static const struct hdmi_phy_features omap44xx_phy_feats = {
+	.bist_ctrl	=	false,
+	.calc_freqout	=	false,
+	.ldo_voltage	=	true,
+	.dcofreq_min	=	500000000,
+	.max_phy	=	185675000,
+};
+
+static const struct hdmi_phy_features omap54xx_phy_feats = {
+	.bist_ctrl	=	true,
+	.calc_freqout	=	true,
+	.ldo_voltage	=	false,
+	.dcofreq_min	=	750000000,
+	.max_phy	=	186000000,
+};
+
+static int hdmi_phy_init_features(struct platform_device *pdev)
+{
+	struct hdmi_phy_features *dst;
+	const struct hdmi_phy_features *src;
+
+	dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
+	if (!dst) {
+		dev_err(&pdev->dev, "Failed to allocate HDMI PHY Features\n");
+		return -ENOMEM;
+	}
+
+	switch (omapdss_get_version()) {
+	case OMAPDSS_VER_OMAP4430_ES1:
+	case OMAPDSS_VER_OMAP4430_ES2:
+	case OMAPDSS_VER_OMAP4:
+		src = &omap44xx_phy_feats;
+		break;
+
+	case OMAPDSS_VER_OMAP5:
+		src = &omap54xx_phy_feats;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	memcpy(dst, src, sizeof(*dst));
+	phy_feat = dst;
+
+	return 0;
+}
+
 int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy)
 {
+	int r;
 	struct resource *res;
 	struct resource temp_res;
 
+	r = hdmi_phy_init_features(pdev);
+	if (r)
+		return r;
+
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
 	if (!res) {
 		DSSDBG("can't get PHY mem resource by name\n");
-- 
1.9.1