[PATCH 3/4] ARM: dts: berlin: add the SDHCI nodes for the BG2Q

[Antoine Ténart]

Hi Andrew,

On Wed, Apr 16, 2014 at 03:09:15PM +0200, Andrew Lunn wrote:
> On Wed, Apr 16, 2014 at 02:40:10PM +0200, Antoine Ténart wrote:
> > Add the SDHCI nodes for the Marvell Berlin BG2Q, using the berlin-sdhci
> > driver.
> > 
> > Signed-off-by: Antoine Ténart <antoine.tenart at free-electrons.com>
> > ---
> >  arch/arm/boot/dts/berlin2q.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 40 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> > index 5925e6a16749..8f897d461460 100644
> > --- a/arch/arm/boot/dts/berlin2q.dtsi
> > +++ b/arch/arm/boot/dts/berlin2q.dtsi
> > @@ -67,6 +67,14 @@
> >  		clock-div = <3>;
> >  	};
> >  
> > +	sdio1clk: sdio1clk {
> > +		compatible = "fixed-factor-clock";
> > +		#clock-cells = <0>;
> > +		clocks = <&syspll>;
> > +		clock-mult = <1>;
> > +		clock-div = <4>;
> > +	};
> > +
> >  	soc {
> >  		compatible = "simple-bus";
> >  		#address-cells = <1>;
> > @@ -75,6 +83,38 @@
> >  		ranges = <0 0xf7000000 0x1000000>;
> >  		interrupt-parent = <&gic>;
> >  
> > +		sdhci0: sdhci at ab0000 {
> > +			compatible = "marvell,berlin2q-sdhci";
> > +			reg = <0xab0000 0x200>;
> > +			clocks = <&sdio1clk>;
> > +			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> > +			keep-power-in-suspend;
> > +			enable-sdio-wakeup;
> > +			broken-cd;
> 
> Hi Antoine
> 
> I would expect these three last properties to be a property of the
> board, not the SoC. Or am i missing something?

No reason, I'll move them.

Thanks !

Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com