[PATCH v2 1/5] Documentation: dt-bindings: reformat and order list of ahci-platform compatibles

[Andrew Lunn]

On Mon, Apr 14, 2014 at 04:34:11PM +0200, Thomas Petazzoni wrote:
> The ahci-platform.txt Device Tree binding documentation is gaining a
> growing number of compatible strings, and it will gain one more with
> the addition of the Marvell Armada 380 AHCI support. It is therefore
> time to reformat this list into a proper bullet list, and more
> importantly order it alphabetically;
> 
> Suggested-by: Andrew Lunn <andrew at lunn.ch>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>

Acked-by: Andrew Lunn <andrew at lunn.ch>

Thanks Thomas

       Andrew

> ---
>  Documentation/devicetree/bindings/ata/ahci-platform.txt | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index 48b285f..5598862 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -4,10 +4,14 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
>  Each SATA controller should have its own node.
>  
>  Required properties:
> -- compatible        : compatible list, one of "snps,spear-ahci",
> -                      "snps,exynos5440-ahci", "ibm,476gtr-ahci",
> -                      "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci"
> -                      "fsl,imx6q-ahci" or "snps,dwc-ahci"
> +- compatible        : compatible string, one of:
> +  - "allwinner,sun4i-a10-ahci"
> +  - "fsl,imx53-ahci"
> +  - "fsl,imx6q-ahci"
> +  - "ibm,476gtr-ahci"
> +  - "snps,dwc-ahci"
> +  - "snps,exynos5440-ahci"
> +  - "snps,spear-ahci"
>  - interrupts        : <interrupt mapping for SATA IRQ>
>  - reg               : <registers mapping>
>  
> -- 
> 1.8.3.2
>