[PATCH RFC v2 4/4] arm64: boot: dts: update rtsm aemv8 dts with PSCI and idle states

[Lorenzo Pieralisi]

This patch updates the RTSM dts file with PSCI bindings and nodes
describing the AEMv8 model idle states parameters.

PSCI function IDs compliancy with PSCI v0.2 is still under development
so this patch provides PSCI function IDs for demonstration purposes only.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
---
 arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 49 ++++++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
index d79de9c..fd23737 100644
--- a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
@@ -27,37 +27,70 @@
 		serial3 = &v2m_serial3;
 	};
 
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		/*
+		 * Function IDs usage and compliancy with PSCI v0.2 still
+		 * under discussion.  Current IDs should be considered
+		 * temporary for demonstration purposes.
+		 */
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-method-param = <0x0010000>;
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <150>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-method-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2500>;
+			};
+		};
+
 		cpu at 0 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu at 1 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu at 2 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 		cpu at 3 {
 			device_type = "cpu";
 			compatible = "arm,armv8";
 			reg = <0x0 0x3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 	};
 
-- 
1.8.4