[RFC PATCH 1/2] PCI: designware: Add ARM64 PCI support

Liviu Dudau Liviu.Dudau at arm.com
Tue Apr 22 05:54:12 PDT 2014


On Wed, Apr 16, 2014 at 07:26:15PM +0100, Arnd Bergmann wrote:
> On Wednesday 16 April 2014 17:57:24 Liviu Dudau wrote:
> > Jingoo,
> > 
> > Thanks for taking a stab at trying to convert a host bridge
> > driver to use the new generic host bridge code.
> > 
> > I do however have concerns on the direction you took. You have split
> > your driver in two, depending on whether it was CONFIG_ARM or CONFIG_ARM64,
> > even if (with my series) it should be no reason why the host bridge
> > driver should not work on other architectures as well once they are
> > converted.
> 
> Right.
> 
> > Also, some of the functions that you use have identical names but different
> > signatures depending on what arch you have selected. This is really bad
> > in my books!
> 
> It's only the sys_to_pcie() function, right?

Right.

> 
> You can probably simplify that to take a void pointer and have only one line
> difference.
> 
> > What about creating functions that use my series directly if CONFIG_ARM64 is
> > defined (or any CONFIG_ you want to create for your driver that you select
> > from CONFIG_ARM64) and otherwise implement the CONFIG_ARM version? That
> > way your driver will call only one API without any #ifdef and when arm code
> > gets converted you drop your adaptation functions. Or (better yet), have a
> > stab at converting bios32 (Rob Herring has already provided some hints on
> > how to do it for arch/arm).
> 
> That would of course be best.
> 
> > To give an example on how things are not going well in your version (not obvious
> > from your patch, but you can see it once you apply it): dw_pcie_host_init()
> > will still carry the handcoded version of DT parsing and that is not guarded
> > against CONFIG_ARM64 being defined, where the parsing will happen again
> > when you call of_create_pci_host_bridge().
> 
> How about making the generic DT parsing code from of_create_pci_host_bridge()
> an exported function that can be called by drivers that don't use
> of_create_pci_host_bridge?

Yes, I guess that should ease the transition to the new code even if the function
should not be needed for the users of the framework.

> 
> > Speaking of the handcoded DT parsing of resources: you are using restype == 0
> > as a way of selecting config space, *and then split the range size into two
> > halves*. From what Jason Gunthorpe and Arnd were saying, config ranges in the DT
> > tree should only be used for ECAM space, so no split is allowed.
> > 
> > Arnd, are you allowing this non-standard use to creep in the bindings?
> 
> I fear it's too late to change that now. In retrospect we probably shoulnd't
> have defined the binding like that.

OK, but I'm going to NAK the driver using the same tricks for arm64. Jingoo will
need to come up with an upgrade path where he has the config space described in
the reg property and parses that if CONFIG_ARM64 is enabled.

> 
> Overall, my impression of the patch is that it should be possible to do
> the same with much fewer #ifdefs by first rearranging the code in one patch
> and then doing another patch on top to add the generic arm64 support.

Agree.

Best regards,
Liviu

> 
> > > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> > > index 6d23d8c..fac0440 100644
> > > --- a/drivers/pci/host/pcie-designware.c
> > > +++ b/drivers/pci/host/pcie-designware.c
> > > @@ -65,14 +65,27 @@
> > >  #define PCIE_ATU_FUNC(x)		(((x) & 0x7) << 16)
> > >  #define PCIE_ATU_UPPER_TARGET		0x91C
> > >  
> > > +#ifdef CONFIG_ARM
> > >  static struct hw_pci dw_pci;
> > > +#endif
> > >  
> > >  static unsigned long global_io_offset;
> > >  
> > > +#ifdef CONFIG_ARM
> > >  static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys)
> > >  {
> > >  	return sys->private_data;
> > >  }
> > > +#endif
> > > +
> > > +#ifdef CONFIG_ARM64
> > > +static inline struct pcie_port *sys_to_pcie(struct pcie_port *pp)
> > > +{
> > > +	return pp;
> > > +}
> > > +
> > > +static struct pci_ops dw_pcie_ops;
> > > +#endif
> > >  
> > >  int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val)
> > >  {
> > > @@ -381,7 +394,9 @@ static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
> > >  {
> > >  	irq_set_chip_and_handler(irq, &dw_msi_irq_chip, handle_simple_irq);
> > >  	irq_set_chip_data(irq, domain->host_data);
> > > +#ifdef CONFIG_ARM
> > >  	set_irq_flags(irq, IRQF_VALID);
> > > +#endif
> > >  
> > >  	return 0;
> > >  }
> > > @@ -397,6 +412,10 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> > >  	struct of_pci_range_parser parser;
> > >  	u32 val;
> > >  	int i;
> > > +#ifdef CONFIG_ARM64
> > > +	struct pci_host_bridge *bridge;
> > > +	resource_size_t lastbus;
> > > +#endif
> > >  
> > >  	if (of_pci_range_parser_init(&parser, np)) {
> > >  		dev_err(pp->dev, "missing ranges property\n");
> > > @@ -489,6 +508,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> > >  	val |= PORT_LOGIC_SPEED_CHANGE;
> > >  	dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
> > >  
> > > +#ifdef CONFIG_ARM
> > >  	dw_pci.nr_controllers = 1;
> > >  	dw_pci.private_data = (void **)&pp;
> > >  
> > > @@ -497,6 +517,16 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> > >  #ifdef CONFIG_PCI_DOMAINS
> > >  	dw_pci.domain++;
> > >  #endif
> > > +#endif
> > > +
> > > +#ifdef CONFIG_ARM64
> > > +	bridge = of_create_pci_host_bridge(pp->dev, &dw_pcie_ops, pp);
> > > +	if (IS_ERR_OR_NULL(bridge))
> > > +		return PTR_ERR(bridge);
> > > +
> > > +	lastbus = pci_rescan_bus(bridge->bus);
> > > +	pci_bus_update_busn_res_end(bridge->bus, lastbus);
> > > +#endif
> > >  
> > >  	return 0;
> > >  }
> > > @@ -695,6 +725,7 @@ static struct pci_ops dw_pcie_ops = {
> > >  	.write = dw_pcie_wr_conf,
> > >  };
> > >  
> > > +#ifdef CONFIG_ARM
> > >  static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
> > >  {
> > >  	struct pcie_port *pp;
> > > @@ -758,6 +789,7 @@ static struct hw_pci dw_pci = {
> > >  	.map_irq	= dw_pcie_map_irq,
> > >  	.add_bus	= dw_pcie_add_bus,
> > >  };
> > > +#endif /* CONFIG_ARM */
> > >  
> > >  void dw_pcie_setup_rc(struct pcie_port *pp)
> 
> 
> 
> 
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯




More information about the linux-arm-kernel mailing list