[PATCH] ARM: dts: am437x-gp-evm: Boot fixes

Tony Lindgren tony at atomide.com
Fri Apr 25 09:41:41 PDT 2014


* Dave Gerlach <d-gerlach at ti.com> [140423 10:25]:
> On 04/23/2014 09:59 AM, Tony Lindgren wrote:
> >* Dave Gerlach <d-gerlach at ti.com> [140422 12:53]:
> >>On 04/22/2014 02:01 PM, Tony Lindgren wrote:
> >>>* Dave Gerlach <d-gerlach at ti.com> [140422 11:52]:
> >>>>This patch, along with patch here [1], fixes boot for am437x-gp-evm. The
> >>>>bootloader configures gpio5_7 to control the DDR3 termination regulator,
> >>>>the linked patch prevents that gpio bank from being reset and losing
> >>>>the previously configured state, and this patch binds the gpio to a
> >>>>regulator so the kernel is aware of the state of the gpio.
> >>>>
> >>>>[1] https://www.mail-archive.com/linux-omap@vger.kernel.org/msg102941.html
> >>>
> >>>Setting up the GPIO regulator makes sense to me. But the hack in the
> >>>link above is potentially a nasty time bomb for anybody trying to
> >>>use GPIO bank 5 on that board.
> >>>
> >>>What tests have been done that the GPIO bank behaves properly when
> >>>it's not reset?
> >>
> >>We've been using this configuration on this board for a while without any
> >>apparent issues. Also, am335x-evmsk already uses the same idea for the VTT
> >>regulator on board from commit 6046adb6ad701026c10adeac8d6a4138895f12e5
> >>[ARM: dts: am335x-evmsk: Do not reset gpio0] and I am unaware of any issues
> >>with that either.
> >
> >OK. Do you have other GPIOs in use as interrupts for devices in these
> >banks and do they work fine?
> 
> I dont see any interrupts in use from gpio5 bank but as a quick test if I
> add ti,no-reset-on-init to gpio3 and gpio4 I see no issue with matrix-keypad
> operation which uses gpios from each of those banks.

OK thanks for testing. I'll apply the ti,no-reset-on-init patch from [1]
above into omap-for-v3.15/fixes-v2.

The regulator patch can wait for v3.16, and should be also implemented
for the am335x-evmsk the same way, so maybe add that too to your patch?

> >Also, can you please test to make sure this works with the most recent
> >Javier's GPIO patches that had the issue of not booting on am335x-evmsk?
> >
> 
> Yes, when using Javier's patches in addition to this patch [1], which was
> found to be necessary through this discussion [2], the AM437x GP EVM boots
> fine with linux-next with my regulator patch and gpio5 no reset patch
> applied.

OK good to hear.

Tony
 
> [1] https://patchwork.kernel.org/patch/4041881/
> [2] http://marc.info/?t=139817273800014&r=1&w=2
> 
> >Regards,
> >
> >Tony
> >
> 



More information about the linux-arm-kernel mailing list