[PATCH v7 00/10] R-Car Gen2 PCIe host driver
Phil Edworthy
phil.edworthy at renesas.com
Fri Apr 4 01:22:30 PDT 2014
Hi Arnd, Ben, Sergei, Simon, Lucas, Geert, Jason,
Thank you for all your comments - is there anything else, or can I get your reviewed-by on these patches (or at least those that you have looked at)?
Thanks
Phil
On: 31 March 2014 11:31, Phil wrote:
> Subject: [PATCH v7 00/10] R-Car Gen2 PCIe host driver
>
> This is version 7 of a PCIe Host driver for the R-Car Gen2 devices, i.e. R-Car H2
> (r8a7790) and R-Car M2 (r8a7791).
>
> v7:
> - Change binding description of clocks to 'clock specifiers'
>
> v6:
> - Correct DT bindings description for reg and clocks
> - Split device and board DT changes
> - Add shmobile to subject for shmobile DT patches
> - Don't check MSI irq number is valid, as upper level checks this
> - Change "Unexpected MSI" msg to debug level
> - Reword "Unexpected MSI" comment so that it's one line
> - Remove patch that adds HAVE_ARM_ARCH_TIMER to koelsch defconfig as
> not needed
>
> v5:
> - Use module_platform_driver instead of subsys_initcall
> - Use the of_device_id data field for HW init function
> - Init hw_pci struct in declaration
> - Renesas SoC compatible string has peripheral before device name
> - Add PCIe bus clock reference
> - Use dma-ranges property to specify inbound memory regions
> - Support multiple IO windows and correct resources
> - Return IRQ_NONE from MSI isr when there is no pending MSI
> - Add additional interrupt bindings
>
> v4:
> - Use runtime PM properly
>
> Phil Edworthy (10):
> PCI: host: rcar: Add Renesas R-Car PCIe driver
> PCI: host: rcar: Add MSI support
> ARM: shmobile: r8a7790: Add PCIe clock device tree nodes
> ARM: shmobile: r8a7791: Add PCIe clock device tree nodes
> dt-bindings: pci: rcar pcie device tree bindings
> ARM: shmobile: r8a7790: Add PCIe device nodes
> ARM: shmobile: lager: Add PCIe device nodes
> ARM: shmobile: r8a7791: Add PCIe device nodes
> ARM: shmobile: koelsch: Add PCIe device nodes
> ARM: shmobile: koelsch: Add PCIe to defconfig
>
> Documentation/devicetree/bindings/pci/rcar-pci.txt | 45 +
> arch/arm/boot/dts/r8a7790-lager.dts | 10 +
> arch/arm/boot/dts/r8a7790.dtsi | 31 +-
> arch/arm/boot/dts/r8a7791-koelsch.dts | 14 +
> arch/arm/boot/dts/r8a7791.dtsi | 31 +-
> arch/arm/configs/koelsch_defconfig | 3 +
> drivers/pci/host/Kconfig | 6 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-rcar.c | 929 +++++++++++++++++++++
> drivers/pci/host/pcie-rcar.h | 87 ++
> include/dt-bindings/clock/r8a7790-clock.h | 1 +
> include/dt-bindings/clock/r8a7791-clock.h | 1 +
> 12 files changed, 1154 insertions(+), 5 deletions(-) create mode 100644
> Documentation/devicetree/bindings/pci/rcar-pci.txt
> create mode 100644 drivers/pci/host/pcie-rcar.c create mode 100644
> drivers/pci/host/pcie-rcar.h
>
> --
> 1.9.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body
> of a message to majordomo at vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list