[PATCH 06/10] ARM: EXYNOS: Add support for mapping PMU base address via DT

[Sylwester Nawrocki]

On 02/04/14 09:50, Pankaj Dubey wrote:
> From: Young-Gun Jang <yg1004.jang at samsung.com>
> 
> Add support for mapping Exynos Power Management Unit (PMU) base address
> from device tree. Code will use existing samsung pmu binding information.
> This patch also adds "get_exynos_pmubase" a helper function to return mapped base
> address to various other files under "mach-exynos".
> 
> Signed-off-by: Young-Gun Jang <yg1004.jang at samsung.com>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> ---
>  arch/arm/mach-exynos/common.h |    2 ++
>  arch/arm/mach-exynos/exynos.c |   44 +++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 46 insertions(+)
> 
[...]
>  #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
> diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
> index a5e1349..a5127fb 100644
> --- a/arch/arm/mach-exynos/exynos.c
> +++ b/arch/arm/mach-exynos/exynos.c
> @@ -35,6 +35,8 @@
>  #define L2_AUX_VAL 0x7C470001
>  #define L2_AUX_MASK 0xC200ffff
>  
> +static void __iomem *exynos_pmu_base __initdata;
> +
>  static struct map_desc exynos4_iodesc[] __initdata = {
>  	{
>  		.virtual	= (unsigned long)S3C_VA_SYS,
> @@ -245,6 +247,47 @@ void __init exynos_init_late(void)
>  	exynos_pm_init();
>  }
>  
> +static char const *exynos_dt_pmu_match[] __initconst = {
> +	"samsung,exynos4210-pmu",
> +	"samsung,exynos4212-pmu",
> +	"samsung,exynos4412-pmu",
> +	"samsung,exynos5250-pmu",
> +	NULL
> +};
> +
> +static int __init exynos_fdt_map_pmu(unsigned long node,
> +		const char *uname, int depth, void *data)
> +{
> +	struct map_desc iodesc;
> +	__be32 *reg;
> +	unsigned long len;
> +
> +	if (of_flat_dt_match(node, exynos_dt_pmu_match)) {
> +		phys_addr_t phys_addr;
> +		reg = of_get_flat_dt_prop(node, "reg", &len);
> +		if (reg == NULL || len != (sizeof(unsigned long) * 2))
> +			return 0;
> +
> +		phys_addr = be32_to_cpu(reg[0]);
> +		iodesc.pfn = __phys_to_pfn(phys_addr);
> +		iodesc.length = be32_to_cpu(reg[1]) - 1;
> +		iodesc.virtual = (unsigned long)S5P_VA_PMU;
> +		iodesc.type = MT_DEVICE;
> +		iotable_init(&iodesc, 1);

Are you sure...you need this in addition to ioremap() below ?
Can't you just use the Linux syscon API ?
There were some patches posted for syscon to make it available in earlier
system initialization stage: https://lkml.org/lkml/2014/2/19/218

> +		exynos_pmu_base = ioremap(phys_addr, be32_to_cpu(reg[1]));
> +		if (WARN_ON(!exynos_pmu_base))
> +			return -EFAULT;
> +	}
> +
> +	return 0;
> +}

--
Thanks,
Sylwester