[PATCH v4 00/16] mfd: max14577: Add support for MAX77836

[Chanwoo Choi]

Hi Krzysztof,

Did you finish this patchset for applying git repository?
I can't find this patchset on mainline kernel.

If this patchset isn't applied on mainline, I'd like you to finish this patch
because I want to maintain up to date patch for max77836/max14577 on mainline.

Thanks,
Chanwoo Choi

On 02/24/2014 07:10 PM, Krzysztof Kozlowski wrote:
> Hi,
> 
> 
> This is fourth version of patchset adding support for MAX77836 device
> to the max14577 driver.
> 
> Lee Jones suggested that after obtaining acks from all maintainers he can
> merged these patches to his tree. These patches touch different subsystems
> (charger/power, regulator, extcon and mfd) so this would be probably the best
> way to merge everything. I would be glad if I could get missing acks
> (or comments).
> 
> 
> Changes since v3
> ================
> 1. Applied minor fixes (pointed by Lee Jones).
> 2. Added one ACK (Lee Jones) and Review-by (Tomasz Figa).
> 3. Patch 14/charger: Minor change in parsing EOC value from DTS.
> 4. Rebased on next-20140224.
> 
> Changes since v2
> ================
> 1. Added ACK-s.
> 2. Applied minor checkpatch fixes (pointed by Lee Jones).
> 3. Rebased on next-20140217.
> 
> Changes since v1
> ================
> 1. Added ACK-s, reviews and tested-by tags.
> 2. Removed applied patches (they were merged to the linux-next tree).
> 3. Applied comments from review (Lee Jones) to 5/15 (detection of device type)
>    and 8/15 (add max77836 support to max14577).
> 4. Rebased on next tree.
> 5. Added patch 13 and 14 (pointed by Jenny Tc):
>    - regulator/mfd: max14577: Export symbols for calculating charger current
>    - charger: max14577: Configure battery-dependent settings from DTS
> 6. Updated bindings documentation with new charger bindings.
> Previous thread:
>  - [PATCH 00/18] mfd: max14577: Add support for MAX77836
>    http://thread.gmane.org/gmane.linux.kernel/1636654/focus=1636674
> 
> 
> Description
> ===========
> The MAX77836 is almost the same as MAX14577. Basically it is an extended
> version of MAX14577. The chipsets have same MUIC component so the extcon,
> charger and regulators require only little adjustments. More changes were
> needed in the charger (because it uses lower charging current) and regulator
> drivers (because mentioned different charing current and additional
> regulators). The MAX77836 has also PMIC and Fuel Gauge (which is the same
> as MAX17040/17048 Fuel Gauge).
> 
> The MAX77836 uses three I2C slave addresses and has additional interrupts
> (related to PMIC and Fuel Gauge). It has also Interrupt Source register,
> just like MAX77686 and MAX77693.
> 
> The patchset is organized in following way:
> 1. Patches from 1 to 7 prepare the driver for supporting MAX77836. They
>    mostly rename symbols and add additional logic related to different
>    device types.
> 2. Patches from 8 to 12 add support for MAX77836.
> 3. Patches 13 and 14 remove hard-coded charger configuration with DTS. They
>    were added after review on mailing lists.
> 4. Patch 15 adds bindings documentation, which was not merged previously.
> 5. Patch 16 adds SUSPEND mode to the regulator driver.
> 
> 
> The patchset is based on linux-next tree and depends on patches from previous
> release which are already merged into next.
> Testing was done on 3.10.
> 
> 
> TODO: Merge max14577, max77686 and max77693 into one common driver. They are
> very similar.
> 
> 
> Best regards,
> Krzysztof Kozlowski
> 
> 
> Chanwoo Choi (1):
>   extcon: max14577: Change extcon name instead of static name according
>     to device type
> 
> Krzysztof Kozlowski (15):
>   mfd: max14577: Rename and add MAX14577 symbols to prepare for
>     max77836
>   mfd: max14577: Rename state container to maxim_core
>   mfd: max14577: Add "muic" suffix to regmap and irq_chip
>   mfd: max14577: Add detection of device type
>   extcon: max14577: Add max14577 prefix to muic_irqs
>   extcon: max14577: Choose muic_irqs according to device type
>   mfd: max77836: Add max77836 support to max14577 driver
>   extcon: max14577: Add support for max77836
>   regulator: max14577: Add support for max77836 regulators
>   charger: max14577: Add support for MAX77836 charger
>   power: max17040: Add ID for max77836 Fuel Gauge block
>   regulator/mfd: max14577: Export symbols for calculating charger
>     current
>   charger: max14577: Configure battery-dependent settings from DTS
>   mfd: max14577: Add device tree bindings document
>   regulator: max14577: Implement SUSPEND mode for MAX77836 LDO-s
> 
>  Documentation/devicetree/bindings/mfd/max14577.txt |  149 +++++
>  drivers/extcon/extcon-max14577.c                   |  274 +++++----
>  drivers/mfd/max14577.c                             |  475 +++++++++++++---
>  drivers/power/max14577_charger.c                   |  361 +++++++++---
>  drivers/power/max17040_battery.c                   |    1 +
>  drivers/regulator/max14577.c                       |  334 ++++++++---
>  include/linux/mfd/max14577-private.h               |  586 ++++++++++++--------
>  include/linux/mfd/max14577.h                       |   50 +-
>  8 files changed, 1697 insertions(+), 533 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
>