[PATCH] ARM: shmobile: lager: Correct setting of ethernet PHY LED mode

[Laurent Pinchart]

Hi Simon,

On Tuesday 08 April 2014 09:21:35 Simon Horman wrote:
> The correct binding is "micrel,led-mode", not "led-mode".
> 
> This corrects an error which was introduced when setting of ethernet PHY
> LED mode was added by 82e62182d59bd1d0 ("ARM: shmobile: lager: Set ethernet
> PHY LED mode").

Indeed. I wonder how I've missed that... :-( Sorry.

> This makes the lager code consistent with the koelsch code which was added
> by ae00d12a032490b3 ("ARM: shmobile: koelsch: Set ethernet PHY LED mode").
> 
> Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> Signed-off-by: Simon Horman <horms+renesas at verge.net.au>

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> 
> * This is compile tested only (which is of negligible value)
>   as I do not have physical access to a Lager board.
> ---
>  arch/arm/boot/dts/r8a7790-lager.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts
> b/arch/arm/boot/dts/r8a7790-lager.dts index a55c5f8..265cba1 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -213,7 +213,7 @@
>  		reg = <1>;
>  		interrupt-parent = <&irqc0>;
>  		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> -		led-mode = <1>;
> +		micrel,led-mode = <1>;
>  	};
>  };

-- 
Regards,

Laurent Pinchart