[PATCH 04/29] memory: mvebu-devbus: fix the conversion of the bus width
thomas.petazzoni at free-electrons.com
Sun Apr 13 07:39:41 PDT 2014
According to the Armada 370 and Armada XP datasheets, the part of the
Device Bus register that configure the bus width should contain 0 for
a 8 bits bus width, and 1 for a 16 bits bus width (other values are
However, the current conversion done in the driver to convert from a
bus width in bits to the value expected by the register leads to
setting the register to 1 for a 8 bits bus, and 2 for a 16 bits bus.
This commit fixes that by adjusting the conversion logic.
This patch fixes a bug that was introduced in
3edad321b1bd2e6c8b5f38146c115c8982438f06 ('drivers: memory: Introduce
Marvell EBU Device Bus driver'), which was merged in v3.11.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Cc: stable at vger.kernel.org
drivers/memory/mvebu-devbus.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 110c036..b82cdf1 100644
@@ -108,8 +108,12 @@ static int devbus_set_timing_params(struct devbus *devbus,
- /* Convert bit width to byte width */
- r.bus_width /= 8;
+ * The bus width is encoded into the register as 0 for 8 bits,
+ * and 1 for 16 bits, so we do the necessary conversion here.
+ r.bus_width = (r.bus_width / 8) - 1;
err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
More information about the linux-arm-kernel