[PATCH v2 2/6] ARM: dts: highbank, ecx-2000: drop address and size cells from GIC node

[Lucas Stach]

This is likely a copy-and-paste error from the
ARM GIC documentation, that has already been fixed.

address-cells should have been set to 0, as with the size
cells. As having those properties set to 0 is the
same thing as not specifying them, drop them completely.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
Acked-by: Rob Herring <robh at kernel.org>
---
v2: no change, added ack
---
 arch/arm/boot/dts/ecx-2000.dts | 2 --
 arch/arm/boot/dts/highbank.dts | 2 --
 2 files changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 2ccbb57fbfa8..cdb7b264b7fb 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -94,8 +94,6 @@
 		intc: interrupt-controller at fff11000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
 			interrupt-controller;
 			interrupts = <1 9 0xf04>;
 			reg = <0xfff11000 0x1000>,
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index ed14aeac0566..85e1a05b8a9c 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -109,8 +109,6 @@
 		intc: interrupt-controller at fff11000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
-- 
1.9.1