[PATCH] ARM: prima2: remove L2 cache size override

[Russell King - ARM Linux]

On Thu, Apr 24, 2014 at 07:11:46AM +0800, Barry Song wrote:
> 2014-04-24 2:21 GMT+08:00 Russell King - ARM Linux <linux at arm.linux.org.uk>:
> > On Wed, Apr 16, 2014 at 10:24:33AM +0100, Russell King - ARM Linux wrote:
> >> On Tue, Apr 15, 2014 at 05:49:02PM +0800, Barry Song wrote:
> >> > +static __init void sirfsoc_init_mach(void)
> >> > +{
> >> > +   l2x0_of_init(0, 0xFDFFFFFFUL);
> >>
> >> BTW, this should be just the plain: 0xfdffffff - no need for UL on the
> >> end.  Also lower case is preferred for hex.
> >
> > So... I provide feedback, and nothing happens.
> >
> > FYI, tonight, I'm pushing out my L2C branch into linux-next with the
> > original patch for prima2 incorporated, as my concerns against your
> > patch have not been addressed.
> 
> Russell, i do agree with your feedback.
> but, in your original patch,  moving to early_initcall will make other
> non-csr platforms call l2x0_of_init() and finish initialization by (0,
> ~0) directly since other platforms also put same general compatible
> prop in dts. in your patch, you have dropped "sirf,prima2-pl310-cache"
> and "sirf,marco-pl310-cache", so it happens by matching general
> "arm,pl310-cache".
> i am still on the way to send v2. if it is not too urgent to you, will
> you wait for me to send v2 by fixing issues in your feedback?

I have no problem adding a patch, or replacing my patch in the series.
All I ask is that it isn't forgotten, and that it's sent before -rc6.

-- 
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.