[PATCH v2.1 8/9] ARM: S3C24XX: convert s3c2410 to common clock framework
Heiko Stübner
heiko at sntech.de
Wed Apr 23 13:10:08 PDT 2014
Convert the machines using the s3c2410 to use the new driver based
on the common clock framework instead of the legacy Samsung clock driver.
As with the s3c244x, machines using the clkout output will need a fixup
from someone with the hardware.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Reviewed-by: Tomasz Figa <t.figa at samsung.com>
---
adapted to apply against v3.16-next/clk-s3c24xx
arch/arm/mach-s3c24xx/Kconfig | 4 ++--
arch/arm/mach-s3c24xx/common.c | 2 --
arch/arm/mach-s3c24xx/mach-amlm5900.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-bast.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-h1940.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-n30.c | 12 ++++++++----
arch/arm/mach-s3c24xx/mach-nexcoder.c | 7 +------
arch/arm/mach-s3c24xx/mach-otom.c | 10 +++++++---
arch/arm/mach-s3c24xx/mach-qt2410.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-smdk2410.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-tct_hammer.c | 9 +++++++--
arch/arm/mach-s3c24xx/mach-vr1000.c | 10 +++++++---
12 files changed, 67 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 96d1e54..57ebb13 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -37,10 +37,10 @@ comment "S3C24XX SoCs"
config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
- depends on SAMSUNG_CLOCK
+ select COMMON_CLK
select CPU_ARM920T
select CPU_LLSERIAL_S3C2410
- select S3C2410_CLOCK
+ select S3C2410_COMMON_CLK
select S3C2410_DMA if S3C24XX_DMA
select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index def8627..a7b1269 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -74,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32410000,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
- .init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410_init,
.name = name_s3c2410
@@ -83,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32410002,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
- .init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410a_init,
.name = name_s3c2410a
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 284ea1f..0e175e0 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = {
static void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init amlm5900_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
#ifdef CONFIG_FB_S3C2410
static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
.width = 160,
@@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
.map_io = amlm5900_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = amlm5900_init,
- .init_time = samsung_timer_init,
+ .init_time = amlm5900_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 13e078c..ab075a6 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -50,7 +50,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
#include <plat/devs.h>
@@ -581,11 +580,16 @@ static void __init bast_map_io(void)
s3c_hwmon_set_platdata(&bast_hwmon_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init bast_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init bast_init(void)
{
register_syscore_ops(&bast_pm_syscore_ops);
@@ -613,6 +617,6 @@ MACHINE_START(BAST, "Simtec-BAST")
.map_io = bast_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = bast_init,
- .init_time = samsung_timer_init,
+ .init_time = bast_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index de08321..0c93068 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -56,7 +56,6 @@
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
@@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = {
static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -662,6 +660,12 @@ static void __init h1940_map_io(void)
WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
}
+static void __init h1940_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/* H1940 and RX3715 need to reserve this for suspend */
static void __init h1940_reserve(void)
{
@@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
.reserve = h1940_reserve,
.init_irq = s3c2410_init_irq,
.init_machine = h1940_init,
- .init_time = samsung_timer_init,
+ .init_time = h1940_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 997684f..49e0393 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -45,7 +45,6 @@
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
@@ -535,11 +534,16 @@ static void __init n30_map_io(void)
{
s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
n30_hwinit();
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init n30_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
/* GPB3 is the line that controls the pull-up for the USB D+ line */
static void __init n30_init(void)
@@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30")
Ben Dooks <ben-linux at fluff.org>
*/
.atag_offset = 0x100,
- .init_time = samsung_timer_init,
+ .init_time = n30_init_time,
.init_machine = n30_init,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
@@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer at weinigel.se>
*/
.atag_offset = 0x100,
- .init_time = samsung_timer_init,
+ .init_time = n30_init_time,
.init_machine = n30_init,
.init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index e2fbe17..eb7fb74 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -142,12 +142,7 @@ static void __init nexcoder_map_io(void)
static void __init nexcoder_init_time(void)
{
- /*
- * for whatever reason the nexcoder called s3c24xx_init_clocks(0)
- * meaning a xti value of 0Hz, so this machine will most likely
- * not work out of the box and needs a fixup.
- */
- s3c2440_init_clocks(0);
+ s3c2440_init_clocks(12000000);
samsung_timer_init();
}
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 7e16b07..889f7d7 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -29,7 +29,6 @@
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/samsung-time.h>
@@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = {
static void __init otom11_map_io(void)
{
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init otom11_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init otom11_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c2410_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = otom11_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index b534b76..0170607 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup);
static void __init qt2410_map_io(void)
{
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
- s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init qt2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init qt2410_machine_init(void)
{
s3c_nand_set_platdata(&qt2410_nand_info);
@@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410")
.map_io = qt2410_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = qt2410_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = qt2410_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index a773789..c961e50 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = {
static void __init smdk2410_map_io(void)
{
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2410_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2410_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
.map_io = smdk2410_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = smdk2410_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2410_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 7fad8f0..3d6afe7 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
static void __init tct_hammer_map_io(void)
{
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init tct_hammer_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init tct_hammer_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.map_io = tct_hammer_map_io,
.init_irq = s3c2410_init_irq,
.init_machine = tct_hammer_init,
- .init_time = samsung_timer_init,
+ .init_time = tct_hammer_init_time,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 02d3437..27c9a37 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -42,7 +42,6 @@
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
-#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/samsung-time.h>
@@ -337,11 +336,16 @@ static void __init vr1000_map_io(void)
pm_power_off = vr1000_power_off;
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
- s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init vr1000_init_time(void)
+{
+ s3c2410_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init vr1000_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -362,6 +366,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c2410_init_irq,
- .init_time = samsung_timer_init,
+ .init_time = vr1000_init_time,
.restart = s3c2410_restart,
MACHINE_END
--
1.9.0
More information about the linux-arm-kernel
mailing list