December 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Dec 1 01:26:13 EST 2013
Ending: Tue Dec 31 23:25:01 EST 2013
Messages: 7147

• 答复: [PATCH 1/3] ARM: hisi: rename hi3xxx to hisi   xuwei (O)
• [PATCH] ARM: mcpm: Make all mcpm functions notrace   Jon Medhurst (Tixy)
• [PATCH] serial: pl011: use port lock to guard control register access   Jon Medhurst (Tixy)
• [GIT PULL] Cacheflush updates for 3.12   Jon Medhurst (Tixy)
• [GIT PULL] Cacheflush updates for 3.12   Jon Medhurst (Tixy)
• [GIT PULL] Cacheflush updates for 3.12   Jon Medhurst (Tixy)
• [PATCH] ARM: cacheflush: correctly limit range of memory region being flushed   Jon Medhurst (Tixy)
• [PATCH] serial: pl011: use port lock to guard control register access   Jon Medhurst (Tixy)
• [PATCH] ARM64: dts: Add clock-frequency to model cpu nodes   Jon Medhurst (Tixy)
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Jon Medhurst (Tixy)
• [PATCH v4 05/16] ARM: use a function table for determining instruction interpreter actions   Jon Medhurst (Tixy)
• [PATCH v4 04/16] ARM: move generic thumb instruction parsing code to new files for use by other feature   Jon Medhurst (Tixy)
• [PATCH v4 02/16] ARM: move shared uprobe/kprobe definitions into new include file   Jon Medhurst (Tixy)
• [PATCH v4 07/16] ARM: Remove use of struct kprobe from generic probes code   Jon Medhurst (Tixy)
• [PATCH v4 13/16] ARM: Add an emulate flag to the kprobes/uprobes instruction decode functions   Jon Medhurst (Tixy)
• [PATCH v3 00/15] uprobes: Add uprobes support for ARM   Jon Medhurst (Tixy)
• [PATCH v4 15/16] ARM: add uprobes support   Jon Medhurst (Tixy)
• [PATCH v4 15/16] ARM: add uprobes support   Jon Medhurst (Tixy)
• [RFC PATCH 3/4] mm/vmalloc.c: Allow lowmem to be tracked in vmalloc   Laura Abbott
• [PATCH 0/3] CMA support for arm64   Laura Abbott
• [PATCH 1/3] arm64: Check for NULL device before getting the coherent_dma_mask   Laura Abbott
• [PATCH 2/3] arm64: Enable CMA   Laura Abbott
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Laura Abbott
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Laura Abbott
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Laura Abbott
• [PATCHv2 0/2] CMA for arm64   Laura Abbott
• [PATCHv2 1/2] arm64: Check for NULL device before getting the coherent_dma_mask   Laura Abbott
• [PATCHv2 2/2] arm64: Enable CMA   Laura Abbott
• [PATCHv2 2/2] arm64: Enable CMA   Laura Abbott
• [PATCHv3 0/2] CMA for arm64   Laura Abbott
• [PATCHv3 1/2] arm64: Check for NULL device before getting the coherent_dma_mask   Laura Abbott
• [PATCHv3 2/2] arm64: Enable CMA   Laura Abbott
• [PATCH] arm: Correct virt_addr_valid   Laura Abbott
• [PATCH] arm64: Correct virt_addr_valid   Laura Abbott
• [PATCH] arm64: Correct virt_addr_valid   Laura Abbott
• [PATCHv3 1/2] arm64: Check for NULL device before getting the coherent_dma_mask   Laura Abbott
• [PATCHv3 2/2] arm64: Enable CMA   Laura Abbott
• [PATCHv3 1/2] arm64: Check for NULL device before getting the coherent_dma_mask   Laura Abbott
• [PATCHv3 1/2] arm64: Check for NULL device before getting the coherent_dma_mask   Laura Abbott
• [PATCHv4 0/2] CMA for arm64   Laura Abbott
• [PATCHv4 1/2] arm64: Warn on NULL device structure for dma APIs   Laura Abbott
• [PATCHv4 2/2] arm64: Enable CMA   Laura Abbott
• [PATCH] arm64: Correct virt_addr_valid   Laura Abbott
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Laura Abbott
• [PATCH] arm64: Correct virt_addr_valid   Laura Abbott
• [PATCHv2 1/2] arm: Correct virt_addr_valid   Laura Abbott
• [PATCHv2 2/2] arm64: Correct virt_addr_valid   Laura Abbott
• [PATCHv2 2/2] arm64: Correct virt_addr_valid   Laura Abbott
• [PATCHv4 0/2] CMA for arm64   Laura Abbott
• [PATCHv3] arm: Correct virt_addr_valid   Laura Abbott
• [PATCH V3] ARM : unwinder : Prevent data abort due to stack overflow   Anurag Aggarwal
• [PATCH V4] ARM : unwinder : Prevent data abort due to stack overflow   Anurag Aggarwal
• [PATCH V4] ARM : unwinder : Prevent data abort due to stack overflow   Anurag Aggarwal
• [PATCH] ARM : unwinder : Prevent data abort due to stack overflow   Anurag Aggarwal
• [PATCH] ARM : unwinder : Prevent data abort due to stack overflow   Anurag Aggarwal
• [PATCH V6] ARM : unwinder : Prevent data abort due to stack overflow   Anurag Aggarwal
• [PATCH V6] ARM : unwinder : Prevent data abort due to stack overflow   Anurag Aggarwal
• [PATCH V6] ARM : unwinder : Prevent data abort due to stack overflow   Anurag Aggarwal
• [PATCH v2 0/3] regulator: tps6586x: add version detection and voltage tables   Stefan Agner
• [PATCH v2 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH v2 2/3] regulator: tps6586x: add and use correct voltage table   Stefan Agner
• [PATCH v2 3/3] ARM: tegra: correct Colibri T20 regulator settings   Stefan Agner
• [PATCH v2 2/3] regulator: tps6586x: add and use correct voltage table   Stefan Agner
• Freeze on Colibri T20 about 5 minutes after boot (3.13-rc1)   Stefan Agner
• Freeze on Colibri T20 about 5 minutes after boot (3.13-rc1)   Stefan Agner
• [PATCH v3 0/3] regulator: tps6586x: add version detection and voltage tables   Stefan Agner
• [PATCH v3 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH v3 2/3] regulator: tps6586x: add and use correct voltage table   Stefan Agner
• [PATCH v3 3/3] ARM: tegra: correct Colibri T20 regulator settings   Stefan Agner
• [PATCH v4 0/3] regulator: tps6586x: add version detection and voltage tables   Stefan Agner
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table   Stefan Agner
• [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings   Stefan Agner
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table   Stefan Agner
• [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings   Stefan Agner
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH v5 0/3] regulator: tps6586x: add version detection and voltage tables   Stefan Agner
• [PATCH v5 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH v5 2/3] regulator: tps6586x: add and use correct voltage table   Stefan Agner
• [PATCH v5 3/3] ARM: tegra: correct Colibri T20 regulator settings   Stefan Agner
• [PATCH v5 2/3] regulator: tps6586x: add and use correct voltage table   Stefan Agner
• [PATCH v5 1/3] mfd: tps6586x: add version detection   Stefan Agner
• [PATCH] ARM: dts: stmpe-ts: fix wrong bindings   Stefan Agner
• [PATCH 0/6] mmc: sdhci: a few fixes on timeout and max_discard_to   Dong Aisheng
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Dong Aisheng
• [PATCH 2/6] mmc: sdhci-esdhc-imx: fix incorrect max_discard_to for uSDHC   Dong Aisheng
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Dong Aisheng
• [PATCH 4/6] mmc: sdhci-esdhc-imx: set the correct max timeout value for uSDHC   Dong Aisheng
• [PATCH 5/6] mmc: sdhci: calculate max_discard_to dynamically for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK   Dong Aisheng
• [PATCH 6/6] mmc: sdhci-esdhc-imx: use actual_clock to calculate timeout   Dong Aisheng
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Dong Aisheng
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Dong Aisheng
• [PATCH 4/6] mmc: sdhci-esdhc-imx: set the correct max timeout value for uSDHC   Dong Aisheng
• [PATCH 5/6] mmc: sdhci: calculate max_discard_to dynamically for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK   Dong Aisheng
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Dong Aisheng
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Dong Aisheng
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Dong Aisheng
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Dong Aisheng
• [PATCH 5/6] mmc: sdhci: calculate max_discard_to dynamically for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK   Dong Aisheng
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Dong Aisheng
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Dong Aisheng
• sdhci-esdhc-imx - power management supported   Dong Aisheng
• [PATCH v2 0/5] mmc: sdhci: a few fixes on timeout and max_discard_to   Dong Aisheng
• [PATCH v2 1/5] mmc: sdhci: add platfrom get_max_timeout_count hook   Dong Aisheng
• [PATCH v2 2/5] mmc: sdhci-esdhc-imx: fix incorrect max_discard_to for uSDHC   Dong Aisheng
• [PATCH v2 3/5] mmc: sdhci: add platform set_timeout hook   Dong Aisheng
• [PATCH v2 4/5] mmc: sdhci-esdhc-imx: set the correct max timeout value for uSDHC   Dong Aisheng
• [PATCH v2 5/5] mmc: sdhci: calculate max_discard_to dynamically for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK   Dong Aisheng
• [PATCH 1/2] mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context   Dong Aisheng
• [PATCH 2/2] mmc: sdhci-esdhc-imx: fix warning during module remove function   Dong Aisheng
• [PATCH 1/1] mmc: sdhci: fix lockdep error on tunning routine   Dong Aisheng
• [PATCH 1/1] mmc: sdhci: fix lockdep error on tunning routine   Dong Aisheng
• [PATCH 1/2] mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context   Dong Aisheng
• [PATCH 2/2] mmc: sdhci-esdhc-imx: fix warning during module remove function   Dong Aisheng
• [PATCH 2/2] mmc: sdhci-esdhc-imx: fix warning during module remove function   Dong Aisheng
• [PATCH V2 1/2] mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context   Dong Aisheng
• [PATCH V2 2/2] mmc: sdhci-esdhc-imx: fix warning during module remove function   Dong Aisheng
• [PATCH 1/1] mmc: sdhci: fix lockdep error on tunning routine   Dong Aisheng
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Leela Krishna Amudala
• [RESEND] [PATCH V3] ARM: dts: Add DMA controller node info on Exynos5420.   Leela Krishna Amudala
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Pratyush Anand
• Memory mapping of config space of pcie devices   Pratyush Anand
• [PATCH 08/12] pcie: designware: Fix IO transfers   Pratyush Anand
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH v2 1/2] fixup: watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register   Doug Anderson
• [PATCH v2 2/2] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH v3] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH v2 2/2] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Doug Anderson
• [PATCH 1/3] ARM: dts: Leave Exynos5250 SPI controller disabled by default   Doug Anderson
• [PATCH 1/3] ARM: dts: Leave Exynos5250 SPI controller disabled by default   Doug Anderson
• [PATCH 1/5] clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock   Doug Anderson
• [PATCH 5/5] ARM: dts: Setup the interrupt parent for max77686   Doug Anderson
• [PATCH 1/5] clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock   Doug Anderson
• [PATCH 2/3] ARM: dts: Add the missing "\" key in non-US keyboards for exynos5250-snow   Doug Anderson
• [PATCH 3/3] ARM: dts: Fix exynos5250-snow's search key to be L_META   Doug Anderson
• [PATCH 3/3] ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix   Doug Anderson
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Doug Anderson
• [PATCH v2 1/3] pinctrl: Add Qualcomm TLMM driver   Bjorn Andersson
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Bjorn Andersson
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Bjorn Andersson
• [PATCH 1/2] gpio: msm: Fix irq mask/unmask by writing bits instead of numbers   Bjorn Andersson
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Bjorn Andersson
• [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig   Bjorn Andersson
• [PATCH 2/7] iommu/omap: omap_iommu_attach() should return ENODEV, not NULL   Anna, Suman
• [PATCH 0/7] Fix omap-iommu probe and convert to DT for 3.14   Anna, Suman
• [PATCH 1/7] iommu/omap: Do bus_set_iommu() only if probe() succeeds   Anna, Suman
• [PATCH 4/7] iommu/omap: Allow enable/disable even without pdata   Anna, Suman
• [PATCH 6/7] ARM: OMAP2+: Remove legacy data from hwmod for omap3 isp iommu   Anna, Suman
• [PATCH 5/7] ARM: dts: Complete data for isp iommu   Anna, Suman
• [PATCH 3/7] iommu/omap: Convert to devicetree   Anna, Suman
• [PATCH 6/7] ARM: OMAP2+: Remove legacy data from hwmod for omap3 isp iommu   Anna, Suman
• [PATCH 1/7] iommu/omap: Do bus_set_iommu() only if probe() succeeds   Anna, Suman
• [PATCH 3/7] iommu/omap: Convert to devicetree   Anna, Suman
• [PATCH 0/7] Fix omap-iommu probe and convert to DT for 3.14   Anna, Suman
• [PATCH 5/7] ARM: dts: Complete data for isp iommu   Anna, Suman
• [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   H. Peter Anvin
• [PATCH] Slightly outdated CONFIG_SMP documentation fix   H. Peter Anvin
• [PATCH 1/2] ARM: default PHYS_OFFSET if !MMU   Jonathan Austin
• [PATCH v2] ARM: add support for the Cortex-A12 processor   Jonathan Austin
• [PATCH v2] ARM: add support for the Cortex-A12 processor   Jonathan Austin
• [PATCH 0/3] usb: ohci-at91: various fixes and improvements   Boris BREZILLON
• [PATCH 1/3] usb: ohci-at91: fix irq and iomem resource retrieval   Boris BREZILLON
• [PATCH 2/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap   Boris BREZILLON
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   Boris BREZILLON
• [PATCH v2 0/4] usb: ohci-at91: various fixes and improvements   Boris BREZILLON
• [PATCH v2 1/4] usb: ohci-at91: fix irq and iomem resource retrieval   Boris BREZILLON
• [PATCH v2 2/4] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap   Boris BREZILLON
• [PATCH v2 3/4] usb: ohci-at91: use dev variable instead of &pdev->dev   Boris BREZILLON
• [PATCH v2 4/4] usb: ohci-at91: use device managed clk retrieval   Boris BREZILLON
• [PATCH v3] usb: ohci-at91: fix irq and iomem resource retrieval   Boris BREZILLON
• [PATCH v3 0/3] usb: ohci-at91: various improvements   Boris BREZILLON
• [PATCH v3 1/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap   Boris BREZILLON
• [PATCH v3 2/3] usb: ohci-at91: use dev variable instead of &pdev->dev   Boris BREZILLON
• [PATCH v3 3/3] usb: ohci-at91: use device managed clk retrieval   Boris BREZILLON
• [PATCH v4] usb: ohci-at91: fix irq and iomem resource retrieval   Boris BREZILLON
• [PATCH v4 0/3] usb: ohci-at91: various improvements   Boris BREZILLON
• [PATCH v4 1/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_ioremap_resource   Boris BREZILLON
• [PATCH v4 2/3] usb: ohci-at91: use dev variable instead of &pdev->dev   Boris BREZILLON
• [PATCH v4 3/3] usb: ohci-at91: use device managed clk retrieval   Boris BREZILLON
• [PATCH v5 0/3] usb: ohci-at91: various improvements   Boris BREZILLON
• [PATCH v5 1/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_ioremap_resource   Boris BREZILLON
• [PATCH v5 2/3] usb: ohci-at91: use dev variable instead of &pdev->dev   Boris BREZILLON
• [PATCH v5 3/3] usb: ohci-at91: use device managed clk retrieval   Boris BREZILLON
• [PATCH 0/2] pinctrl: at91: fix clk handling in suspend/resume funcs   Boris BREZILLON
• [PATCH 1/2] pinctrl: at91: fix clk_unprepare and clk_disable order   Boris BREZILLON
• [PATCH 2/2] pinctrl: at91: replace clk_prepare + clk_enable by clk_prepare_enable   Boris BREZILLON
• [RFC PATCH 00/10] ARM: at91: move aic driver to drivers/irqchips   Boris BREZILLON
• [RFC PATCH 01/10] genirq: generic chip: export irq_map_generic_chip function   Boris BREZILLON
• [RFC PATCH 02/10] irqchip: atmel-aic: add new atmel AIC driver   Boris BREZILLON
• [RFC PATCH 03/10] ARM: at91: introduce OLD_IRQ_AT91 Kconfig option   Boris BREZILLON
• [RFC PATCH 04/10] ARM: at91: enclose at91_aic_xx calls in IS_ENABLED(CONFIG_OLD_IRQ_AT91) blocks   Boris BREZILLON
• [RFC PATCH 05/10] ARM: at91: make use of the new AIC driver for dt enabled boards   Boris BREZILLON
• [RFC PATCH 06/10] irqchip: atmel-aic: move binding doc to interrupt-controller directory   Boris BREZILLON
• [RFC PATCH 07/10] irqchip: atmel-aic: document new dt properties and children nodes   Boris BREZILLON
• [RFC PATCH 08/10] ARM: at91: remove old irq material   Boris BREZILLON
• [RFC PATCH 09/10] ARM: at91/dt: add new AIC irq mux definitions   Boris BREZILLON
• [PATCH] clk: at91: fix pmc_clk_ids data type attriubte   Boris BREZILLON
• [RFC PATCH 10/10] ARM: at91/dt: add new AIC irq mux definitions for sama5 SoCs   Boris BREZILLON
• [PATCH] spi/atmel: document clock properties   Boris BREZILLON
• [PATCH v3 0/2] clk: add clk accuracy support   Boris BREZILLON
• [PATCH v3 1/2] clk: add clk accuracy retrieval support   Boris BREZILLON
• [PATCH v3 2/2] clk: add accuracy support for fixed clock   Boris BREZILLON
• [PATCH] drivers/misc: atmel-ssc: document clock properties   Boris BREZILLON
• [PATCH] drivers/misc: atmel_tclib: document clock properties   Boris BREZILLON
• [PATCH] i2c: at91: document clock properties   Boris BREZILLON
• [PATCH] tty/serial: at91: document clock properties   Boris BREZILLON
• [PATCH] iio: at91: document ADC clock properties   Boris BREZILLON
• [PATCH v2] tty/serial: at91: document clock properties   Boris BREZILLON
• [PATCH 0/3] ARM: at91/dt: add clock properties to sama5d3 crypto devs   Boris BREZILLON
• [PATCH 1/3] ARM: at91/dt: add clk properties to sama5d3 SHA device node   Boris BREZILLON
• [PATCH 2/3] ARM: at91/dt: add clk properties to sama5d3 AES device node   Boris BREZILLON
• [PATCH 3/3] ARM: at91/dt: add clk properties to sama5d3 TDES device node   Boris BREZILLON
• [PATCH v4 0/2] clk: add clk accuracy support   Boris BREZILLON
• [PATCH v4 1/2] clk: add clk accuracy retrieval support   Boris BREZILLON
• [PATCH v4 2/2] clk: add accuracy support for fixed clock   Boris BREZILLON
• [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Ralf Baechle
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Felipe Balbi
• [PATCH v2 02/15] mfd: menelaus: Switch over to module_i2c_driver   Felipe Balbi
• [PATCH v2 03/15] mfd: menelaus: Convert to threaded irq   Felipe Balbi
• [PATCH v2 04/15] mfd: menelaus: Remove unnecessary loop   Felipe Balbi
• [PATCH v2 05/15] mfd: menelaus: Use for_each_set_bit()   Felipe Balbi
• [PATCH v2 06/15] mfd: menelaus: Pass menelaus pointer as argument to enable/disable irq   Felipe Balbi
• [PATCH v2 07/15] mfd: menelaus: Limit the usage of the_menelaus   Felipe Balbi
• [PATCH v2 08/15] mfd: menelaus: Pass menelaus_chip pointer to add/remove irq functions   Felipe Balbi
• [PATCH v2 09/15] mfd: menelaus: Pass menelaus_chip pointer to get/set voltage   Felipe Balbi
• [PATCH v2 10/15] mfd: menelaus: Pass menelaus_chip argument to menelaus <-> time helpers   Felipe Balbi
• [PATCH v2 11/15] mfd: menelaus: Start to use irqdomain   Felipe Balbi
• [PATCH v2 12/15] mfd: menelaus: Switch all children to threaded_irq   Felipe Balbi
• [PATCH v2 13/15] mfd: menelaus: Remove unnecessary definition   Felipe Balbi
• [PATCH v2 14/15] mfd: menelaus: IRQ is a requirement   Felipe Balbi
• [PATCH v2 15/15] mfd: menelaus: Use devm_request_threaded_irq()   Felipe Balbi
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Felipe Balbi
• [PATCH v2 1/5] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH v2 2/5] usb: phy: Add keystone usb phy driver   Felipe Balbi
• [PATCH v2 3/5] ARM: dts: keystone: Add usb phy devicetree bindings   Felipe Balbi
• [PATCH v2 4/5] ARM: dts: keystone: Add usb devicetree bindings   Felipe Balbi
• [PATCH v4 4/4] USB: OMAP1: Tahvo USB transceiver driver   Felipe Balbi
• [PATCH v2 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy   Felipe Balbi
• [PATCH v4 4/4] USB: OMAP1: Tahvo USB transceiver driver   Felipe Balbi
• [PATCH v2 1/5] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Felipe Balbi
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Felipe Balbi
• [PATCH v3 01/15] mfd: menelaus: Drop __exit section annotation   Felipe Balbi
• [PATCH v3 02/15] mfd: menelaus: Switch over to module_i2c_driver   Felipe Balbi
• [PATCH v3 03/15] mfd: menelaus: Convert to threaded irq   Felipe Balbi
• [PATCH v3 04/15] mfd: menelaus: Remove unnecessary loop   Felipe Balbi
• [PATCH v3 05/15] mfd: menelaus: Use for_each_set_bit()   Felipe Balbi
• [PATCH v3 06/15] mfd: menelaus: Pass menelaus pointer as argument to enable/disable irq   Felipe Balbi
• [PATCH v3 07/15] mfd: menelaus: Limit the usage of the_menelaus   Felipe Balbi
• [PATCH v3 08/15] mfd: menelaus: Pass menelaus_chip pointer to add/remove irq functions   Felipe Balbi
• [PATCH v3 09/15] mfd: menelaus: Pass menelaus_chip pointer to get/set voltage   Felipe Balbi
• [PATCH v3 10/15] mfd: menelaus: Pass menelaus_chip argument to menelaus <-> time helpers   Felipe Balbi
• [PATCH v3 11/15] mfd: menelaus: Start to use irqdomain   Felipe Balbi
• [PATCH v3 12/15] mfd: menelaus: Switch all children to threaded_irq   Felipe Balbi
• [PATCH v3 13/15] mfd: menelaus: Remove unnecessary definition   Felipe Balbi
• [PATCH v3 14/15] mfd: menelaus: IRQ is a requirement   Felipe Balbi
• [PATCH v3 15/15] mfd: menelaus: Use devm_request_threaded_irq()   Felipe Balbi
• [PATCH v3 01/23] mm/memblock: debug: correct displaying of upper memory boundary   Felipe Balbi
• [PATCH v3 1/2] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   Felipe Balbi
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   Felipe Balbi
• [PATCH v3 03/15] mfd: menelaus: Convert to threaded irq   Felipe Balbi
• [PATCH v3 07/15] mfd: menelaus: Limit the usage of the_menelaus   Felipe Balbi
• [PATCH v3 08/15] mfd: menelaus: Pass menelaus_chip pointer to add/remove irq functions   Felipe Balbi
• [PATCH v3 11/15] mfd: menelaus: Start to use irqdomain   Felipe Balbi
• [PATCH v3 15/15] mfd: menelaus: Use devm_request_threaded_irq()   Felipe Balbi
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Felipe Balbi
• OMAP still fails - usb phy stuff   Felipe Balbi
• OMAP still fails - usb phy stuff   Felipe Balbi
• OMAP still fails - usb phy stuff   Felipe Balbi
• [PATCH] phy: omap_usb2: fix module dependency   Felipe Balbi
• OMAP still fails - usb phy stuff   Felipe Balbi
• [PATCH v4 1/2] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   Felipe Balbi
• [PATCH v3 1/2] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH v5 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Felipe Balbi
• [PATCH v5 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Felipe Balbi
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Felipe Balbi
• [PATCH v3 1/2] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH v5 1/2] usb: dwc3: Add Keystone specific glue layer   Felipe Balbi
• [PATCH 0/7] usb: dwc3: pm_runtime implementation   Felipe Balbi
• [PATCH 1/7] usb: dwc3: keystone: add basic PM support   Felipe Balbi
• [PATCH 2/7] usb: dwc3: omap: add basic pm_runtime support   Felipe Balbi
• [PATCH 3/7] usb: dwc3: pci: add pm_runtime support   Felipe Balbi
• [PATCH 4/7] usb: dwc3: omap: fix pm_runtime usage   Felipe Balbi
• [PATCH 5/7] usb: dwc3: omap: fix order of pm_runtime vs child removal   Felipe Balbi
• [PATCH 6/7] usb: dwc3: exynos: remove DEV_PM_OPS hackery   Felipe Balbi
• [PATCH 7/7] usb: dwc3: exynos: add pm_runtime support   Felipe Balbi
• [PATCH 1/7] usb: dwc3: keystone: add basic PM support   Felipe Balbi
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Felipe Balbi
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Felipe Balbi
• [PATCH] usb: dwc3: omap: remove DEV_PM_OPS trickery   Felipe Balbi
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Felipe Balbi
• [PATCH 3/7] usb: dwc3: pci: add pm_runtime support   Felipe Balbi
• [PATCH v6 02/15] usb: phy-mxs: Add platform judgement code   Felipe Balbi
• [PATCH v6 03/15] usb: phy-mxs: Add auto clock and power setting   Felipe Balbi
• [PATCH v6 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle   Felipe Balbi
• [PATCH v6 06/15] usb: phy-mxs: Add anatop regmap   Felipe Balbi
• [PATCH v6 07/15] usb: phy: add notify suspend and resume callback   Felipe Balbi
• [PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Felipe Balbi
• [PATCH v6 14/15] usb: phy-mxs: Add system suspend/resume API   Felipe Balbi
• [PATCH v6 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Felipe Balbi
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Felipe Balbi
• [PATCH 7/7] usb: dwc3: exynos: add pm_runtime support   Felipe Balbi
• [PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Felipe Balbi
• [PATCH 7/7] usb: dwc3: exynos: add pm_runtime support   Felipe Balbi
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Felipe Balbi
• [PATCH v6 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Felipe Balbi
• [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform   Felipe Balbi
• [PATCH v6 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Felipe Balbi
• [PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Felipe Balbi
• [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform   Felipe Balbi
• [PATCH 01/10] mfd: menelaus: Drop __exit section annotation   Felipe Balbi
• [PATCH 02/10] mfd: menelaus: Switch over to module_i2c_driver   Felipe Balbi
• [PATCH 03/10] mfd: menelaus: Convert to threaded irq   Felipe Balbi
• [PATCH 04/10] mfd: menelaus: Remove unnecessary loop   Felipe Balbi
• [PATCH 05/10] mfd: menelaus: Use for_each_set_bit()   Felipe Balbi
• [PATCH 06/10] mfd: menelaus: Limit the usage of the_menelaus   Felipe Balbi
• [PATCH 07/10] mfd: menelaus: Start to use irqdomain   Felipe Balbi
• [PATCH 08/10] mfd: menelaus: Switch all children to threaded_irq   Felipe Balbi
• [PATCH 09/10] mfd: menelaus: Remove unnecessary definition   Felipe Balbi
• [PATCH 10/10] mfd: menelaus: IRQ is a requirement   Felipe Balbi
• [PATCH 05/10] mfd: menelaus: Use for_each_set_bit()   Felipe Balbi
• [PATCH 0/7] usb: dwc3: pm_runtime implementation   Felipe Balbi
• [PATCH 0/7] usb: dwc3: pm_runtime implementation   Felipe Balbi
• [RFC 5/5] usb: dwc3: enable async suspend/resume   Felipe Balbi
• [RFC 4/5] usb: dwc3-exynos: enable async suspend/resume   Felipe Balbi
• [PATCH v7 8/9] phy: add Broadcom Kona USB2 PHY driver   Felipe Balbi
• [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs   Felipe Balbi
• [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs   Felipe Balbi
• [PATCH v7 8/9] phy: add Broadcom Kona USB2 PHY driver   Felipe Balbi
• [RFT/RFC/PATCH 00/31] arm: omap: irq: cleanup INTC driver   Felipe Balbi
• [PATCH] usb: musb: Remove USB_GADGET driver dependency   Felipe Balbi
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Felipe Balbi
• [PATCHv12 00/49] ARM: TI SoC clock DT conversion   Felipe Balbi
• [PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Felipe Balbi
• [PATCH v7 00/14] Add power management support for mxs phy   Felipe Balbi
• [RFT/RFC/PATCH 00/31] arm: omap: irq: cleanup INTC driver   Felipe Balbi
• [PATCH v8 9/9] ARM: dts: add usb udc support to bcm281xx   Felipe Balbi
• [PATCH] ARM: configs: Select USB PHY for AM335x SoC   Felipe Balbi
• [PATCH v8 11/12] usb: phy-mxs: Add system suspend/resume API   Felipe Balbi
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Felipe Balbi
• [PATCH 08/12] mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare   Chris Ball
• mmc: mxs: Use mmc_of_parse   Chris Ball
• [PATCH 08/12] mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare   Chris Ball
• [PATCH] arm64/xen: redefine xen_remap on arm64   Chen Baozi
• [PATCH v6 7/7] jump_label: use defined macros instead of hard-coding for better readability   Jason Baron
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Vaibhav Bedia
• [PATCH 0/4] Add support for clocks in S5M8767   Tushar Behera
• [PATCH RESEND 0/4] Add support for clocks in S5M8767   Tushar Behera
• [PATCH RESEND 1/4] clk: clk-s2mps11: Refactor for including support for other MFD clocks   Tushar Behera
• [PATCH RESEND 2/4] clk: clk-s2mps11: Add support for clocks in S5M8767 MFD   Tushar Behera
• [PATCH RESEND 3/4] mfd: sec-core: Add cells for S5M8767-clocks   Tushar Behera
• [PATCH RESEND 4/4] ARM: dts: Add S5M8767 clock nodes on Arndale board   Tushar Behera
• [PATCH RESEND 1/4] clk: clk-s2mps11: Refactor for including support for other MFD clocks   Tushar Behera
• i.MX6/PCIe and MSI interrupts   Jürgen Beisert
• i.MX6/PCIe and MSI interrupts   Jürgen Beisert
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Marek Belisko
• [PATCH] ARM: dts: omap3-gta04: Add EOC irq gpio line handling.   Marek Belisko
• [PATCH] ARM: dts: mxs: add #io-channel-cells to mx28 lradc   Alexandre Belloni
• [PATCH] ARM: dts: mxs: Add iio-hwmon to crystalfontz boards   Alexandre Belloni
• [PATCH] ARM: dts: mxs: add #io-channel-cells to mx28 lradc   Alexandre Belloni
• [PATCH 1/3] pinctrl: at91: correct a few typos   Alexandre Belloni
• [PATCH 2/3] pinctrl: at91: initialize config parameter to 0   Alexandre Belloni
• [PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show   Alexandre Belloni
• [PATCH 2/3] pinctrl: at91: initialize config parameter to 0   Alexandre Belloni
• [PATCH] pinctrl: pinconf: remove checks on ops->pin_config_get   Alexandre Belloni
• [PATCH 2/3] pinctrl: at91: initialize config parameter to 0   Alexandre Belloni
• [PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show   Alexandre Belloni
• [PATCHv2] pinctrl: pinconf: remove checks on ops->pin_config_get   Alexandre Belloni
• [PATCH] pinctrl: pinconf: remove warning: unused variable 'ops'   Alexandre Belloni
• [PATCH 1/2] ARM: dts: mxs: Add iio-hwmon to mx28 soc   Alexandre Belloni
• [PATCH 2/2] ARM: dts: mxs: Add iio-hwmon to mx23 soc   Alexandre Belloni
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Arnd Bergmann
• [PATCH V2] dma: tegra: register as an OF DMA controller   Arnd Bergmann
• [PATCH V3] dma: tegra: register as an OF DMA controller   Arnd Bergmann
• [PATCH 5/5] ARM: msm: Move MSM's DT based hardware to multi-platform support   Arnd Bergmann
• [PATCH V3] dma: tegra: register as an OF DMA controller   Arnd Bergmann
• [PATCHv3 1/4] clk: socfpga: Add a clock driver for SOCFPGA's system manager   Arnd Bergmann
• [PATCHv3 4/4] arm: dts: Add support for SD/MMC on SOCFPGA   Arnd Bergmann
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Arnd Bergmann
• [RFC part3 PATCH 1/2] clocksource / arch_timer: Use ACPI GTDT table to initialize arch timer   Arnd Bergmann
• [RFC part2 PATCH 8/9] ACPI / ARM64: Update acpi_register_gsi to register with the core IRQ subsystem   Arnd Bergmann
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Arnd Bergmann
• [PATCH] ARM: clean-up common multi-platform kconfig options   Arnd Bergmann
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Arnd Bergmann
• [PATCHv4 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings   Arnd Bergmann
• [PATCHv4 1/4] arm: dts: Add support for SD/MMC on SOCFPGA   Arnd Bergmann
• [PATCH] ARM: clean-up common multi-platform kconfig options   Arnd Bergmann
• [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Arnd Bergmann
• [RFC part1 PATCH 0/7] Make ACPI core running on ARM64   Arnd Bergmann
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Arnd Bergmann
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Arnd Bergmann
• [PATCHv4 1/4] arm: dts: Add support for SD/MMC on SOCFPGA   Arnd Bergmann
• [PATCH] ARM: bcm2835: Fix grammar in help message   Arnd Bergmann
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Arnd Bergmann
• [PATCH v3 2/3] arm: Add [U]EFI runtime services support   Arnd Bergmann
• Moschip MCS8142 SoC   Arnd Bergmann
• Moschip MCS8142 SoC   Arnd Bergmann
• MCS8142   Arnd Bergmann
• Moschip MCS8142 SoC   Arnd Bergmann
• [PATCH] ARM: clean-up common multi-platform kconfig options   Arnd Bergmann
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Arnd Bergmann
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Arnd Bergmann
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Arnd Bergmann
• [PATCH v3 2/3] arm: Add [U]EFI runtime services support   Arnd Bergmann
• [PATCH V2] dma: tegra: register as an OF DMA controller   Arnd Bergmann
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Arnd Bergmann
• [PATCH] ARM: clean-up common multi-platform kconfig options   Arnd Bergmann
• [PATCH 0/2] ARM: sunxi: Fix interrupt trigger types in the DT   Arnd Bergmann
• [PATCH 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Arnd Bergmann
• [PATCH 3/3] ARM: clps711x: Migrate CLPS711X subarch to the new irqchip driver   Arnd Bergmann
• [PATCH 2/3] ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver   Arnd Bergmann
• [PATCH 0/3] ARM: clps711x: IRQCHIP driver   Arnd Bergmann
• [PATCH 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Arnd Bergmann
• [PATCH] ARM: clean-up common multi-platform kconfig options   Arnd Bergmann
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Arnd Bergmann
• [PATCH v2] ARM: add support for the Cortex-A12 processor   Arnd Bergmann
• [RFC part1 PATCH 0/7] Make ACPI core running on ARM64   Arnd Bergmann
• [PATCH] ARM: clean-up common multi-platform kconfig options   Arnd Bergmann
• [PATCH] ARM: clean-up common multi-platform kconfig options   Arnd Bergmann
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Arnd Bergmann
• [PATCH 6/9] ARM: dts: pxa3xx: move declaration to header   Arnd Bergmann
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Arnd Bergmann
• [PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Arnd Bergmann
• [PATCH 0/9] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks   Arnd Bergmann
• [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks   Arnd Bergmann
• [PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Arnd Bergmann
• [PATCHv5 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings   Arnd Bergmann
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Arnd Bergmann
• [PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Arnd Bergmann
• [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks   Arnd Bergmann
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Arnd Bergmann
• [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks   Arnd Bergmann
• [PATCH] clk: socfpga: Map the clk manager base address in the clock driver   Arnd Bergmann
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Arnd Bergmann
• [PATCHv2] clk: socfpga: Map the clk manager base address in the clock driver   Arnd Bergmann
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Arnd Bergmann
• [PATCHv4 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings   Arnd Bergmann
• [PATCH 0/2] ARM: sunxi: Fix interrupt trigger types in the DT   Arnd Bergmann
• [PATCH v5] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Arnd Bergmann
• [RESEND PATCH] clk: socfpga: Remove socfpga_init_clocks   Arnd Bergmann
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Arnd Bergmann
• [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs   Arnd Bergmann
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Arnd Bergmann
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Arnd Bergmann
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Arnd Bergmann
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Arnd Bergmann
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Arnd Bergmann
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Arnd Bergmann
• [RFC part2 PATCH 8/9] ACPI / ARM64: Update acpi_register_gsi to register with the core IRQ subsystem   Arnd Bergmann
• [PATCH 08/12] pcie: designware: Fix IO transfers   Arnd Bergmann
• [PATCH 3/3] clk: hisilicon: add hi3620_mmc_clks   Arnd Bergmann
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Arnd Bergmann
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Arnd Bergmann
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Arnd Bergmann
• [PATCH 0/2] serial: clps711x: UART driver refactor   Arnd Bergmann
• [PATCH v13] dmaengine: Add MOXA ART DMA engine driver   Arnd Bergmann
• [PATCH 06/12] pcie: designware: Move register definition to the header file   Arnd Bergmann
• [PATCH 05/12] clk: SPEAr13xx: Fix pcie clock name   Arnd Bergmann
• [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to header file   Arnd Bergmann
• [PATCH 03/12] SPEAr13xx: Add SPEAr1310 PCIe register definitions   Arnd Bergmann
• [PATCH 09/12] pcie: SPEAr13xx: Add designware pcie support   Arnd Bergmann
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Arnd Bergmann
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Arnd Bergmann
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Arnd Bergmann
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Arnd Bergmann
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Arnd Bergmann
• [PATCH 05/12] clk: SPEAr13xx: Fix pcie clock name   Arnd Bergmann
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Arnd Bergmann
• [PATCH v4 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Arnd Bergmann
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Arnd Bergmann
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Arnd Bergmann
• [PATCH 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Arnd Bergmann
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Arnd Bergmann
• [PATCH 09/12] pcie: SPEAr13xx: Add designware pcie support   Arnd Bergmann
• [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to header file   Arnd Bergmann
• [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci   Arnd Bergmann
• [PATCH v2 16/16] misc: support for I-8024 in LP-8x4x   Arnd Bergmann
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   Arnd Bergmann
• [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci   Arnd Bergmann
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Arnd Bergmann
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [PATCH] watchdog: mach-moxart: add restart handler   Arnd Bergmann
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   Arnd Bergmann
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Arnd Bergmann
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   Arnd Bergmann
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Arnd Bergmann
• [PATCH 2/7] ARM: msm: Add support for APQ8074 Dragonboard   Arnd Bergmann
• [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig   Arnd Bergmann
• [PATCH V2 1/4] Documentation: Add documentation for APM X-Gene SoC Queue Manager/Traffic Manager DTS binding   Arnd Bergmann
• [PATCH V2 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Arnd Bergmann
• [PATCH V2 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Arnd Bergmann
• [PATCH V2 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Arnd Bergmann
• [PATCH V2 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Arnd Bergmann
• [PATCH 4/5] drivers: net: APM X-Gene SoC Ethernet driver error handling   Arnd Bergmann
• [PATCH 0/5] drivers: net: Adding support for APM X-Gene SoC Ethernet base driver   Arnd Bergmann
• [PATCH 1/5] Documentation: APM X-Gene SoC Ethernet DTS binding documentation   Arnd Bergmann
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Arnd Bergmann
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Arnd Bergmann
• [PATCH 6/6] at91: dt: sam9261: Added DM9000 in the device tree   Arnd Bergmann
• [Xen-devel] [PATCH] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Jan Beulich
• [PATCH] arm64: Add hwcaps for crypto and CRC32 extensions.   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 1/4] arm64: drop redundant macros from read_cpuid()   Ard Biesheuvel
• [PATCH 2/4] arm64: Add hwcaps for crypto and CRC32 extensions.   Ard Biesheuvel
• [PATCH 3/4] ARM: allocate hwcaps bits for v8 crypto extensions   Ard Biesheuvel
• [PATCH 4/4] arm64: add 32-bit compat hwcaps for v8 crypto extensions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH v2 0/5] arm64: advertise availability of CRC and crypto instructions   Ard Biesheuvel
• [PATCH v2 1/5] ARM: add support for AT_HWCAP2 ELF auxv entry   Ard Biesheuvel
• [PATCH v2 2/5] binfmt_elf: add ELF_HWCAP2 to compat auxv entries   Ard Biesheuvel
• [PATCH v2 3/5] arm64: add AT_HWCAP2 support for 32-bit compat   Ard Biesheuvel
• [PATCH v2 4/5] ARM: introduce HWCAP2 feature bits for ARMv8 Crypto Extensions   Ard Biesheuvel
• [PATCH v2 5/5] arm64: advertise ARMv8 extensions to 32-bit compat ELF binaries   Ard Biesheuvel
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Maxime Bizon
• [PATCH 0/1] ARM: sunxi: select ARM_PSCI   Zalan Blenessy
• [PATCH 1/1] ARM: sunxi: select ARM_PSCI   Zalan Blenessy
• [PATCH v2 00/11] Consolidate asm/fixmap.h files   Jonas Bonn
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Paolo Bonzini
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   James Bottomley
• [PATCH 0/5] Allow MSM DT platforms to be built multi-platform   Stephen Boyd
• [PATCH 1/5] mmc: msm_sdcc: Limit driver to platforms that use it   Stephen Boyd
• [PATCH 2/5] tty: serial: Limit msm_serial_hs driver to platforms that use it   Stephen Boyd
• [PATCH 3/5] ARM: msm: Only build clock.c on proc_comm based platforms   Stephen Boyd
• [PATCH 4/5] ARM: msm: Only build timer.c if required   Stephen Boyd
• [PATCH 5/5] ARM: msm: Move MSM's DT based hardware to multi-platform support   Stephen Boyd
• [PATCH v2 1/3] pinctrl: Add Qualcomm TLMM driver   Stephen Boyd
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Stephen Boyd
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Stephen Boyd
• [PATCH] ARM: dts: msm: Fix gpio interrupt and reg length   Stephen Boyd
• [PATCH 1/2] gpio: msm: Fix irq mask/unmask by writing bits instead of numbers   Stephen Boyd
• [PATCH 2/2] gpio: msm: Add module device table and mark table const   Stephen Boyd
• [PATCH 0/8] Modernize pm8921 with irqdomains + regmap   Stephen Boyd
• [PATCH 1/8] mfd: ssbi: Remove platform data structs and hide ssbi type enum   Stephen Boyd
• [PATCH 2/8] mfd: ssbi: Constify buffer in ssbi_write   Stephen Boyd
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Stephen Boyd
• [PATCH 4/8] mfd: ssbi: Mark match table const   Stephen Boyd
• [PATCH 5/8] mfd: Move pm8xxx-irq.c contents into only driver that uses it   Stephen Boyd
• [PATCH 6/8] mfd: pm8921: Update for genirq changes   Stephen Boyd
• [PATCH 7/8] mfd: pm8921: Migrate to irqdomains   Stephen Boyd
• [PATCH 8/8] mfd: pm8921: Use ssbi regmap   Stephen Boyd
• [PATCH 0/7] Use regmap+devm in pm8xxx input drivers   Stephen Boyd
• [PATCH 1/7] Input: pmic8xxx-pwrkey - Pass input device directly to interrupt   Stephen Boyd
• [PATCH 2/7] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Stephen Boyd
• [PATCH 3/7] Input: pm8xxx-vibrator - Migrate to devm_* APIs   Stephen Boyd
• [PATCH 4/7] Input: pm8xxx-vibrator - Migrate to regmap APIs   Stephen Boyd
• [PATCH 5/7] genirq: Add devm_request_any_context_irq()   Stephen Boyd
• [PATCH 6/7] Input: pmic8xxx-keypad - Migrate to devm_* APIs   Stephen Boyd
• [PATCH 7/7] Input: pmic8xxx-keypad - Migrate to regmap APIs   Stephen Boyd
• [PATCH 1/5] mmc: msm_sdcc: Limit driver to platforms that use it   Stephen Boyd
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Stephen Boyd
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Stephen Boyd
• [PATCH v2 1/3] pinctrl: Add Qualcomm TLMM driver   Stephen Boyd
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Stephen Boyd
• [PATCH 7/8] mfd: pm8921: Migrate to irqdomains   Stephen Boyd
• [PATCH 5/8] mfd: Move pm8xxx-irq.c contents into only driver that uses it   Stephen Boyd
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Stephen Boyd
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Stephen Boyd
• [PATCH] regmap: Allow regmap_bulk_read() to work for "no-bus" regmaps   Stephen Boyd
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Stephen Boyd
• [PATCH 1/7] Input: pmic8xxx-pwrkey - Pass input device directly to interrupt   Stephen Boyd
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Stephen Boyd
• [PATCH] regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps   Stephen Boyd
• [PATCH v3 04/12] clk: Add regmap core helpers for enable/disable/is_enabled   Stephen Boyd
• [PATCH 2/7] ARM: msm: Add support for APQ8074 Dragonboard   Stephen Boyd
• [PATCH] regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps   Stephen Boyd
• [PATCH v2 0/7] Modernize pm8921 with irqdomains, regmap, DT   Stephen Boyd
• [PATCH v2 1/7] mfd: Move pm8xxx-irq.c contents into only driver that uses it   Stephen Boyd
• [PATCH v2 2/7] mfd: pm8921: Update for genirq changes   Stephen Boyd
• [PATCH v2 3/7] mfd: pm8921: Migrate to irqdomains   Stephen Boyd
• [PATCH v2 4/7] mfd: ssbi: Add regmap read/write helpers   Stephen Boyd
• [PATCH v2 5/7] mfd: pm8921: Use ssbi regmap   Stephen Boyd
• [PATCH v2 6/7] mfd: pm8921: Add DT match table   Stephen Boyd
• [PATCH v2 7/7] devicetree: bindings: Document PM8921/8058 PMICs   Stephen Boyd
• [PATCH v2 0/9] CPU enable method based SMP/hotplug + MSM conversion   Stephen Boyd
• [PATCH v2 1/9] devicetree: bindings: Document Krait/Scorpion cpus and enable-method   Stephen Boyd
• [PATCH v2 2/9] devicetree: bindings: Document qcom,kpss-acc   Stephen Boyd
• [PATCH v2 3/9] devicetree: bindings: Document qcom,saw2 node   Stephen Boyd
• [PATCH v2 4/9] ARM: Introduce CPU_METHOD_OF_DECLARE() for cpu hotplug/smp   Stephen Boyd
• [PATCH v2 5/9] ARM: msm: Remove pen_release usage   Stephen Boyd
• [PATCH v2 6/9] ARM: msm: Re-organize platsmp to make it extensible   Stephen Boyd
• [PATCH v2 7/9] ARM: msm: Add SMP support for KPSSv1   Stephen Boyd
• [PATCH v2 8/9] ARM: msm: Add SMP support for KPSSv2   Stephen Boyd
• [PATCH v2 9/9] ARM: dts: msm: Add nodes necessary for SMP boot   Stephen Boyd
• [PATCH v2 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Stephen Boyd
• [PATCH v4 00/15] Add support for MSM's mmio clock/reset controller   Stephen Boyd
• [PATCH v4 01/15] reset: Silence warning in reset-controller.h   Stephen Boyd
• [PATCH v4 02/15] clk: Allow drivers to pass in a regmap   Stephen Boyd
• [PATCH v4 03/15] clk: Add regmap core helpers for enable/disable/is_enabled   Stephen Boyd
• [PATCH v4 04/15] clk: Add set_rate_and_parent() op   Stephen Boyd
• [PATCH v4 05/15] clk: qcom: Add support for phase locked loops (PLLs)   Stephen Boyd
• [PATCH v4 06/15] clk: qcom: Add support for root clock generators (RCGs)   Stephen Boyd
• [PATCH v4 07/15] clk: qcom: Add support for branches/gate clocks   Stephen Boyd
• [PATCH v4 08/15] clk: qcom: Add reset controller support   Stephen Boyd
• [PATCH v4 09/15] clk: qcom: Add support for MSM8960's global clock controller (GCC)   Stephen Boyd
• [PATCH v4 10/15] clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)   Stephen Boyd
• [PATCH v4 11/15] clk: qcom: Add support for MSM8974's global clock controller (GCC)   Stephen Boyd
• [PATCH v4 12/15] clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)   Stephen Boyd
• [PATCH v4 13/15] clk: qcom: Add support for MSM8660's global clock controller (GCC)   Stephen Boyd
• [PATCH v4 14/15] devicetree: bindings: Document qcom,gcc   Stephen Boyd
• [PATCH v4 15/15] devicetree: bindings: Document qcom,mmcc   Stephen Boyd
• [PATCH v3 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Stephen Boyd
• [PATCH v4 03/15] clk: Add regmap core helpers for enable/disable/is_enabled   Stephen Boyd
• [PATCH] regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps   Stephen Boyd
• [PATCH v2 4/7] mfd: ssbi: Add regmap read/write helpers   Stephen Boyd
• [PATCH v3 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Stephen Boyd
• [PATCH v2] regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps   Stephen Boyd
• [PATCH v4 0/6] Krait L1/L2 EDAC driver   Stephen Boyd
• [PATCH v4 1/6] edac: Don't try to cancel workqueue when it's never setup   Stephen Boyd
• [PATCH v4 2/6] genirq: export percpu irq functions for module usage   Stephen Boyd
• [PATCH v4 3/6] ARM: Add Krait L2 accessor functions   Stephen Boyd
• [PATCH v4 4/6] devicetree: bindings: Document Krait L1/L2 EDAC   Stephen Boyd
• [PATCH v4 5/6] edac: Add support for Krait CPU cache error detection   Stephen Boyd
• [PATCH v4 6/6] ARM: dts: msm: Add Krait CPU/L2 nodes   Stephen Boyd
• [PATCH v2 0/7] Allow MSM DT platforms to be built multi-platform   Stephen Boyd
• [PATCH v2 1/7] usb: phy: msm: Move mach dependent code to platform data   Stephen Boyd
• [PATCH v2 2/7] mmc: msm_sdcc: Limit driver to platforms that use it   Stephen Boyd
• [PATCH v2 3/7] tty: serial: Limit msm_serial_hs driver to platforms that use it   Stephen Boyd
• [PATCH v2 4/7] ARM: msm: Only build clock.c on proc_comm based platforms   Stephen Boyd
• [PATCH v2 5/7] ARM: msm: Only build timer.c if required   Stephen Boyd
• [PATCH v2 6/7] drm/msm: Drop unnecessary mach include   Stephen Boyd
• [PATCH v2 7/7] ARM: msm: Move MSM's DT based hardware to multi-platform support   Stephen Boyd
• [PATCH v2 0/7] Allow MSM DT platforms to be built multi-platform   Stephen Boyd
• [PATCH v2 6/7] drm/msm: Drop unnecessary mach include   Stephen Boyd
• [PATCH v2 6/7] drm/msm: Drop unnecessary mach include   Stephen Boyd
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Kevin Bracey
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Jassi Brar
• [RFC v2 1/4] power: asv: Add common ASV support for Samsung SoCs   Yadwinder Singh Brar
• [RFC v2 1/4] power: asv: Add common ASV support for Samsung SoCs   Yadwinder Singh Brar
• [RFC v2 1/4] power: asv: Add common ASV support for Samsung SoCs   Yadwinder Singh Brar
• [PATCH 0/7] misc Tegra clock fixes   Andrew Bresticker
• [PATCH 1/7] clk: tegra: Fix PLLP rate table   Andrew Bresticker
• [PATCH 2/7] clk: tegra: Fix PLLD mnp table   Andrew Bresticker
• [PATCH 3/7] clk: tegra: PLLD2 fixes for hdmi   Andrew Bresticker
• [PATCH 4/7] clk: tegra: fix host1x clock on Tegra124   Andrew Bresticker
• [PATCH 5/7] clk: tegra: fix sdmmc clks on Tegra1x4   Andrew Bresticker
• [PATCH 6/7] clk: tegra: cclk_lp has a pllx/2 divider   Andrew Bresticker
• [PATCH 7/7] clk: tegra: use max divider if divider overflows   Andrew Bresticker
• [PATCH v3 1/2] mmc: arasan: Add driver for Arasan SDHCI   Soren Brinkmann
• [PATCH v3 2/2] arm: dt: zynq: Add SDHCI nodes   Soren Brinkmann
• [PATCH 0/2] clockevents   Soren Brinkmann
• [PATCH 1/2] time: Serialize calls to 'clockevents_update_freq' in the timing core   Soren Brinkmann
• [PATCH 2/2] time: clockevents: Adjust timer interval when frequency changes   Soren Brinkmann
• [PATCH] ARM: zynq: add gem support   Soren Brinkmann
• [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq   Sören Brinkmann
• [PATCH 1/2] time: Serialize calls to 'clockevents_update_freq' in the timing core   Sören Brinkmann
• [PATCH v2 1/9] arm: dt: zynq: Remove 'clock-ranges' from TTC nodes   Sören Brinkmann
• [PATCH v2 5/9] clocksource/cadence_ttc: Adjust interval in clock notifier   Sören Brinkmann
• [PATCH v3 1/2] mmc: arasan: Add driver for Arasan SDHCI   Sören Brinkmann
• [PATCH v5] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v4 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Sören Brinkmann
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Sören Brinkmann
• [PATCH v5 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Sören Brinkmann
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Sören Brinkmann
• [PATCH v6 0/2] ARM: mach-moxart: add MOXA ART SoC support   Sören Brinkmann
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Sören Brinkmann
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Sören Brinkmann
• arm-soc: Xilinx Zynq dt changes for v3.14   Sören Brinkmann
• [PATCH 1/3] dmaengine: pl330: Set residue in tx_status callback.   Alban Browaeys
• [PATCH 0/7] MSM patches for 3.14   David Brown
• [PATCH 1/7] ARM: msm: trout: fix uninit var warning   David Brown
• [PATCH 2/7] ARM: msm: Add support for APQ8074 Dragonboard   David Brown
• [PATCH 3/7] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974   David Brown
• [PATCH 4/7] ARM: msm: Simplify ARCH_MSM_DT config   David Brown
• [PATCH 5/7] ARM: dts: MSM8974: Add restart node   David Brown
• [PATCH 6/7] ARM: dts: MSM8974: Add MMIO architected timer node   David Brown
• [PATCH 7/7] ARM: msm_defconfig: Enable restart driver   David Brown
• Spurious timeouts in mvmdio   Leigh Brown
• Spurious timeouts in mvmdio   Leigh Brown
• Spurious timeouts in mvmdio   Leigh Brown
• Spurious timeouts in mvmdio   Leigh Brown
• [PATCH] net: mvmdio: fix interrupt timeout handling   Leigh Brown
• [PATCH] net: mvmdio: fix interrupt timeout handling   Leigh Brown
• [PATCH v2] net: mvmdio: fix interrupt timeout handling   Leigh Brown
• [PATCH v2] net: mvmdio: fix interrupt timeout handling   Leigh Brown
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Len Brown
• [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Mark Brown
• [PATCH v2 1/3] mfd: tps6586x: add version detection   Mark Brown
• [alsa-devel] [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Mark Brown
• [alsa-devel] [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Mark Brown
• [PATCH] arm64: dts: Add a virtio disk to the RTSM motherboard   Mark Brown
• [PATCH] ARM: dts: Add CODEC MCLK for SMDK5250   Mark Brown
• [PATCH 1/3] ASoC: ux500_pcm: Stop pretending that we support varying address widths   Mark Brown
• [PATCH] arm64: dts: Add a virtio disk to the RTSM motherboard   Mark Brown
• [PATCH] ASoC: wm8731: fix dsp mode configuration   Mark Brown
• [PATCH 1/2] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Mark Brown
• [RFC part1 PATCH 2/7] ARM64 : Add dummy asm/cpu.h   Mark Brown
• [PATCH] arm64: cmpxchg: update macros to prevent warnings   Mark Brown
• [PATCH] arm64: cmpxchg: update macros to prevent warnings   Mark Brown
• [PATCH] arm64: cmpxchg: update macros to prevent warnings   Mark Brown
• [PATCH] arm64: dts: Add a virtio disk to the RTSM motherboard   Mark Brown
• [PATCH] arm64: dts: Add a virtio disk to the RTSM motherboard   Mark Brown
• [PATCH 1/2] arm64: dts: Add a virtio disk to the RTSM motherboard   Mark Brown
• [PATCH 2/2] arm64: dts: Reduce size of virtio block device for foundation model   Mark Brown
• [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops   Mark Brown
• [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode   Mark Brown
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Mark Brown
• [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table   Mark Brown
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Mark Brown
• [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table   Mark Brown
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Mark Brown
• Boot time errors/warnings on snowball   Mark Brown
• [PATCH] arm64: cmpxchg: update macros to prevent warnings   Mark Brown
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Mark Brown
• [PATCH 1/2] regulator: gpio-regulator: Add required regulator-type property   Mark Brown
• Boot time errors/warnings on snowball   Mark Brown
• [PATCH] ASoC: samsung: Initialize the dma_data for secondary dai   Mark Brown
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Mark Brown
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Mark Brown
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Mark Brown
• [PATCH 1/2] cpufreq: enable ARM drivers on arm64   Mark Brown
• [PATCH 1/2] cpufreq: enable ARM drivers on arm64   Mark Brown
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Mark Brown
• [PATCH v5 2/3] regulator: tps6586x: add and use correct voltage table   Mark Brown
• [PATCH] ARM64: dts: Add clock-frequency to model cpu nodes   Mark Brown
• [RFC part1 PATCH 0/7] Make ACPI core running on ARM64   Mark Brown
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Mark Brown
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Mark Brown
• [RFC part1 PATCH 0/7] Make ACPI core running on ARM64   Mark Brown
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Mark Brown
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Mark Brown
• [Patch v2 2/2] ASoC: atmel: sam9x5_wm8731: remove platform_set_drvdata   Mark Brown
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Mark Brown
• [PATCH] ARM64: dts: Add clock-frequency to model cpu nodes   Mark Brown
• [PATCHv8][ 1/5] ASoC: eukrea-tlv320: Add DT support.   Mark Brown
• [PATCH] ARM: topology: Staticise non-exported symbols   Mark Brown
• [PATCH 1/3] ARM: dts: Leave Exynos5250 SPI controller disabled by default   Mark Brown
• [PATCH] ARM: topology: Staticise non-exported symbols   Mark Brown
• [PATCH 2/3] ARM: dts: Disable I2C controllers by default on Exynos5250   Mark Brown
• [PATCH 3/3] ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix   Mark Brown
• [PATCH 1/3] ARM: dts: Leave Exynos5250 SPI controller disabled by default   Mark Brown
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Mark Brown
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Mark Brown
• [PATCH 0/3] serial: amba-pl011: fix race conditions during initialisation   Mark Brown
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Mark Brown
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Mark Brown
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Mark Brown
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Mark Brown
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Mark Brown
• [PATCH 1/6] arm64: Add asm/cpu.h   Mark Brown
• [PATCH 2/6] arm64: dts: Add a virtio disk to the RTSM motherboard   Mark Brown
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 5/6] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 6/6] arm64: dts: Add CPU topology properties for ARMv8 4xA53 4xA57 FVP   Mark Brown
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Mark Brown
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Mark Brown
• [PATCH] mfd: s2mps11: Fix build after regmap field rename in sec-core.c   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 1/6] arm64: Add asm/cpu.h   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Mark Brown
• regulator-core has_full_constraints set too late for dt using boards ?   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 5/6] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Mark Brown
• [PATCH 1/3] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 2/3] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 3/3] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH] ARM: dts: Add CODEC MCLK for SMDK5250   Mark Brown
• [PATCH 2/2] regulator: s5m8767: Fix driver probe fail on BUCK7/8 regulators   Mark Brown
• [PATCH 1/3] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• regulator-core has_full_constraints set too late for dt using boards ?   Mark Brown
• [PATCH 2/3] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 5/6] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• regulator-core has_full_constraints set too late for dt using boards ?   Mark Brown
• regulator-core has_full_constraints set too late for dt using boards ?   Mark Brown
• [PATCH 1/3] regulator: act8865: add PMIC(Power Management IC) driver   Mark Brown
• [PATCH 2/3] regulator: act8865: add device tree binding doc   Mark Brown
• [PATCH 2/3] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Mark Brown
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Mark Brown
• [PATCH 1/3] regulator: act8865: add PMIC(Power Management IC) driver   Mark Brown
• [PATCH] mfd: s2mps11: Fix build after regmap field rename in sec-core.c   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH 3/4] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 4/4] arm64: topology: Provide relative power numbers for cores   Mark Brown
• [GIT PULL 6/7] Samsung DT for v3.14   Mark Brown
• [PATCH 1/2] ASoC: sgtl5000: read chip revision for once   Mark Brown
• [PATCHv3,RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Mark Brown
• [PATCH] regmap: Allow regmap_bulk_read() to work for "no-bus" regmaps   Mark Brown
• [PATCH 3/8] regmap: Add support for using regmap over ssbi   Mark Brown
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Mark Brown
• [PATCHv4] rtc: Add support for Intersil ISL12057 I2C RTC chip   Mark Brown
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Mark Brown
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Mark Brown
• [GIT PULL 6/7] Samsung DT for v3.14   Mark Brown
• [PATCH 3/3 v2] ARM: dts: sama5d3xcm: add the regulator device node   Mark Brown
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Mark Brown
• [PATCH 2/3 v2] regulator: act8865: add device tree binding doc   Mark Brown
• [PATCH 1/3 v2] regulator: act8865: add PMIC act8865 driver   Mark Brown
• [PATCH V2 2/2] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Mark Brown
• [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Mark Brown
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Mark Brown
• [PATCH] ASoC: kirkwood: Fix the CPU DAI rates   Mark Brown
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH v3] regulator_get_optional: don't print an error when no regulator is found   Mark Brown
• [PATCH 1/3 v2] regulator: act8865: add PMIC act8865 driver   Mark Brown
• [PATCH v3 1/3] regulator: act8865: add PMIC act8865 driver   Mark Brown
• [PATCH] ASoC: wm8904: fix DSP mode B configuration   Mark Brown
• [PATCH v3 3/3] ARM: dts: sama5d3xcm: add the regulator device node   Mark Brown
• [PATCHv5,RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Mark Brown
• [PATCH 2/2 v2] ARM: s3c64xx: get rid of custom <mach/gpio.h>   Mark Brown
• [PATCH 1/2] regulator: tps65910: Add backup battery regulator   Mark Brown
• [PATCH 2/2] ARM: dts: tps65910 backup battery regulator   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCHv3 1/7] ALSA: Add SAI SoC Digital Audio Interface driver.   Mark Brown
• [PATCHv3 4/7] Documentation: Add device tree bindings for Freescale SAI.   Mark Brown
• [PATCHv3 5/7] ASoC: fsl: Add SGTL5000 based audio machine driver.   Mark Brown
• [PATCH] regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps   Mark Brown
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Mark Brown
• [PATCH v7 2/3] regulator: max14577: Add regulator driver for Maxim 14577   Mark Brown
• [PATCHv3 5/7] ASoC: fsl: Add SGTL5000 based audio machine driver.   Mark Brown
• [PATCH v3 1/9] ASoC: fsl-ssi: Fix probe error handling   Mark Brown
• [PATCH v3 5/9] ASoC: fsl-ssi: Add offline_config flag   Mark Brown
• [PATCH 0/4] arm64 topology support   Mark Brown
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Mark Brown
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Mark Brown
• [PATCH 3/4] arm64: topology: Tell the scheduler about the relative power of cores   Mark Brown
• [PATCH 4/4] arm64: topology: Provide relative power numbers for cores   Mark Brown
• [PATCHv4 2/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Mark Brown
• [alsa-devel] [PATCH RFC v2 REPOST 0/8] Beaglebone-Black HDMI audio   Mark Brown
• [PATCHv4 4/4] Documentation: Add device tree bindings for Freescale SAI.   Mark Brown
• [PATCHv4 1/4] ALSA: Add SAI SoC Digital Audio Interface driver.   Mark Brown
• [PATCH -next] spi: nuc900: remove redundant return value check of platform_get_resource()   Mark Brown
• [PATCH -next] spi: spi-s3c24xx: remove redundant return value check of platform_get_resource()   Mark Brown
• [PATCH] arm64: cmpxchg: update macros to prevent warnings   Mark Brown
• [PATCH 1/2] arm64: dts: Add a virtio disk to the RTSM motherboard   Mark Brown
• [PATCH 2/2] arm64: dts: Reduce size of virtio block device for foundation model   Mark Brown
• [PATCH] arm64: cmpxchg: update macros to prevent warnings   Mark Brown
• [PATCH 2/2] arm64: dts: Reduce size of virtio block device for foundation model   Mark Brown
• Possible arm64 patches for stable   Mark Brown
• [rtc-linux] Re: Can someone Ack and queue a patch for RTC subsytem?   Mark Brown
• [PATCH] MAINTAINERS: take maintainership for Energy Micro efm32 SoCs   Mark Brown
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Mark Brown
• [rtc-linux] Re: Can someone Ack and queue a patch for RTC subsytem?   Mark Brown
• [PATCH 00/10] ASoC: ARM: ux500: Better prepare for full Device Tree   Mark Brown
• [PATCH v2 1/2] regulator: tps65910: Add backup battery regulator   Mark Brown
• [PATCH v4 1/3] regulator: act8865: add PMIC act8865 driver   Mark Brown
• [RFC 07/18] regmap: debugfs: Always create "registers" & "access" files   Mark Brown
• [RFC 10/18] regulator: vexpress: Use regmap instead of custom interface   Mark Brown
• [RFC 06/18] regmap: Formalise use of non-bus context   Mark Brown
• [PATCH] regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps   Mark Brown
• [PATCH v2 4/7] mfd: ssbi: Add regmap read/write helpers   Mark Brown
• [PATCH v4 02/15] clk: Allow drivers to pass in a regmap   Mark Brown
• [PATCH v4 03/15] clk: Add regmap core helpers for enable/disable/is_enabled   Mark Brown
• [PATCH v5 2/3] regulator: act8865: add device tree binding doc   Mark Brown
• [PATCH v5 1/3] regulator: act8865: add PMIC act8865 driver   Mark Brown
• [PATCH v2 4/7] mfd: ssbi: Add regmap read/write helpers   Mark Brown
• [PATCH] regulator: act8865: register all regulators regardless of how many are used   Mark Brown
• [PATCH] regulator: act8865: fix incorrect devm_kzalloc for act8865   Mark Brown
• [PATCH v2 5/7] mfd: pm8921: Use ssbi regmap   Mark Brown
• [PATCH v2] regmap: Allow regmap_bulk_write() to work for "no-bus" regmaps   Mark Brown
• [PATCH v2 6/8] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Mark Brown
• [PATCH] spi:fsl-dspi:add support of DSPI IP in big endian   Mark Brown
• [PATCH v2 6/8] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Mark Brown
• [Patch v2 2/2] ASoC: atmel: sam9x5_wm8731: remove platform_set_drvdata   Mark Brown
• [PATCH v2] regulator: act8865: register all regulators regardless of how many are used   Mark Brown
• [PATCH RFC v2 REPOST 2/8] ASoC: davinci-evm: Add named clock reference to DT bindings   Mark Brown
• [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus   Mark Brown
• [PATCH RFC v2 REPOST 4/8] ASoC: hdmi-codec: Add devicetree binding with documentation   Mark Brown
• [PATCH RESEND 1/4] clk: clk-s2mps11: Refactor for including support for other MFD clocks   Mark Brown
• [GIT PULL 2nd 3/5] Samsung defconfig update for v3.14   Mark Brown
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Marc C
• [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware   Giuseppe CAVALLARO
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Giuseppe CAVALLARO
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Gregory CLEMENT
• [PATCH 1/3] ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h   Gregory CLEMENT
• [PATCH 2/3] ARM: mvebu: fix register length for Armada XP PMSU   Gregory CLEMENT
• [PATCH 3/3] ARM: mvebu: make armada_370_xp_pmsu_init() static   Gregory CLEMENT
• Openblocks AX3-4 i2c bus lockup   Gregory CLEMENT
• Openblocks AX3-4 i2c bus lockup   Gregory CLEMENT
• Openblocks AX3-4 i2c bus lockup   Gregory CLEMENT
• [RFC PATCH 0/3] Fix i2c bus hang on A0 version of the Armada XP SoCs   Gregory CLEMENT
• [RFC PATCH 1/3] arm: mvebu: add new dts file for old variant of Openblocks AX3-4   Gregory CLEMENT
• [RFC PATCH 2/3] i2c: mv64xxx: Fix bus hang on A0 version of the Armada XP SoCs   Gregory CLEMENT
• [RFC PATCH 3/3] i2c: mv64xxx: Document the newly introduced Armada XP A0 compatible   Gregory CLEMENT
• [PATCH v4 2/2] ARM: sun4i/sun7i: RTC driver   Carlo Caione
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   James Cameron
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   James Cameron
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   James Cameron
• [PATCH v2] serial: rewrite pxa2xx-uart to use 8250_core   James Cameron
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   James Cameron
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   James Cameron
• [PATCH] iio: at91: document ADC clock properties   Jonathan Cameron
• [Xen-devel] [PATCH] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Ian Campbell
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Ian Campbell
• [PATCH] xen/arm64: do not call the swiotlb functions twice   Ian Campbell
• [Xen-devel] [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Ian Campbell
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Ian Campbell
• [PATCH v2 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy   Javier Martinez Canillas
• [PATCH v2 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy   Javier Martinez Canillas
• [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE   Steve Capper
• [PATCH] arm64: Add hwcaps for crypto and CRC32 extensions.   Steve Capper
• [PATCH 0/2] Cache flush fixes   Steve Capper
• [PATCH 1/2] arm: mm: fix dcache flush logic for compound high pages   Steve Capper
• [PATCH 2/2] arm: cacheflush: Fix user split-caching logic   Steve Capper
• [PATCH 2/2] arm: cacheflush: Fix user split-caching logic   Steve Capper
• [PATCH 2/2] arm: cacheflush: Fix user split-caching logic   Steve Capper
• [RFC PATCH 0/6] Huge pages for short descriptors on ARM   Steve Capper
• [RFC PATCH 1/6] mm: hugetlb: Introduce huge_pte_page and huge_pte_present   Steve Capper
• [RFC PATCH 2/6] arm: mm: Adjust the parameters for __sync_icache_dcache   Steve Capper
• [RFC PATCH 3/6] arm: mm: Make mmu_gather aware of huge pages   Steve Capper
• [RFC PATCH 4/6] arm: mm: Compute pgprot values for huge page sections   Steve Capper
• [RFC PATCH 5/6] arm: mm: HugeTLB support for non-LPAE systems   Steve Capper
• [RFC PATCH 6/6] arm: mm: Add Transparent HugePage support for non-LPAE   Steve Capper
• [PATCH V2] arm: mm: fix dcache flush logic for compound high pages   Steve Capper
• [PATCH 1/2] arm: mm: fix dcache flush logic for compound high pages   Steve Capper
• [PATCH V2] arm: mm: fix dcache flush logic for compound high pages   Steve Capper
• [PATCH 1/3] ARM: dts: mxs: Add 18bit pin config for lcdif.   Denis Carikli
• [PATCH 2/3] ARM: dts: mxs: Add a new pin config for the usb0 ID.   Denis Carikli
• [PATCH 3/3] Add support for the eukrea-cpuimx28.   Denis Carikli
• [PATCHv13] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.   Denis Carikli
• [PATCHv13][ 1/4] video: imxfb: Introduce regulator support.   Denis Carikli
• [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.   Denis Carikli
• [PATCHv13][ 3/4] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.   Denis Carikli
• [PATCHv13][ 4/4] ARM: dts: imx25: mbimxsd25: Add displays support.   Denis Carikli
• [PATCHv7][ 1/2] backlight: gpio_backlight: Use a default state enum.   Denis Carikli
• [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.   Denis Carikli
• [PATCHv5][ 1/8] [media] v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.   Denis Carikli
• [PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display.   Denis Carikli
• [PATCHv5][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them.   Denis Carikli
• [PATCHv5][ 4/8] staging: imx-drm: Use de-active and pixelclk-active display-timings.   Denis Carikli
• [PATCHv5][ 5/8] staging: imx-drm: parallel display: add regulator support.   Denis Carikli
• [PATCHv5][ 6/8] ARM: dts: mbimx51sd: Add display support.   Denis Carikli
• [PATCHv5][ 7/8] ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.   Denis Carikli
• [PATCHv5][ 8/8] ARM: imx_v6_v7_defconfig: Enable backlight gpio support.   Denis Carikli
• [PATCHv2][ 1/2] ARM: dts: imx53: Add gpio and input dt includes.   Denis Carikli
• [PATCHv2][ 2/2] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.   Denis Carikli
• [patch] video: vt8500: fix error handling in probe()   Dan Carpenter
• [PATCH CFT] ARM:MSM: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR default   Courtney Cavin
• [PATCH 7/8] mfd: pm8921: Migrate to irqdomains   Courtney Cavin
• [PATCH] dma-buf: avoid using IS_ERR_OR_NULL   Mauro Carvalho Chehab
• [PATCH] ARM: imx6: Derive spdif clock from pll3_pfd3_454m   Nicolin Chen
• [PATCH 0/2] Add missing audio-related clocks to imx6 clock tree   Nicolin Chen
• [PATCH 1/2] ARM: imx6sl: Add missing pll4_audio_div to the clock tree   Nicolin Chen
• [PATCH 2/2] ARM: imx6sl: Add missing spba clock to clock tree   Nicolin Chen
• [alsa-devel] [BUG] Race in spdif initialisation / ASoC oopses on module removal   Nicolin Chen
• [PATCH] ARM: dts: imx6qdl: add spdif support for sabreauto   Nicolin Chen
• [PATCH v3 4/9] ASoC: fsl-ssi: Fix interrupt mapping and release   Nicolin Chen
• [PATCH v4 00/17] Add power management support for mxs phy   Peter Chen
• [PATCH v4 01/17] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v4 03/17] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v4 04/17] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v4 05/17] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v4 06/17] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v4 07/17] usb: phy: add notify suspend and resume callback   Peter Chen
• [PATCH v4 08/17] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Peter Chen
• [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v4 10/17] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v4 11/17] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v4 12/17] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v4 13/17] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v4 14/17] ARM: dts: imx: add mxs phy controller id   Peter Chen
• [PATCH v4 15/17] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v4 16/17] usb: phy-mxs: fix the problem by only using 1st controller's register   Peter Chen
• [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection   Peter Chen
• [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v4 16/17] usb: phy-mxs: fix the problem by only using 1st controller's register   Peter Chen
• [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection   Peter Chen
• [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection   Peter Chen
• [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v3 00/10] Add power management support for chipidea   Peter Chen
• [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK   Peter Chen
• [PATCHv3] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   Peter Chen
• [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK   Peter Chen
• [PATCH v2 1/2] usb: chipidea: usbmisc: Add support for i.MX27/i.MX31 CPUs   Peter Chen
• [PATCH v2 2/2] usb: chipidea: usbmisc: Add support for i.MX51 CPU   Peter Chen
• [PATCHv3] usb: chipidea: add support for USB OTG controller on TI-NSPIRE   Peter Chen
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Peter Chen
• [PATCH v5 00/15] Add power management support for mxs phy   Peter Chen
• [PATCH v5 01/15] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v5 02/15] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v5 03/15] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v5 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v5 05/15] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v5 06/15] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v5 07/15] usb: phy: add notify suspend and resume callback   Peter Chen
• [PATCH v5 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Peter Chen
• [PATCH v5 09/15] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v5 10/15] ARM: dts: imx: add mxs phy controller id   Peter Chen
• [PATCH v5 11/15] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v5 12/15] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v5 13/15] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v5 14/15] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v5 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v5 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Peter Chen
• [PATCH v5 09/15] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v5 12/15] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v5 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v5 09/15] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v5 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v6 00/15] Add power management support for mxs phy   Peter Chen
• [PATCH v6 01/15] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v6 02/15] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v6 03/15] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v6 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v6 05/15] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v6 06/15] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v6 07/15] usb: phy: add notify suspend and resume callback   Peter Chen
• [PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Peter Chen
• [PATCH v6 09/15] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v6 10/15] ARM: dts: imx: add mxs phy controller id   Peter Chen
• [PATCH v6 11/15] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v6 12/15] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v6 13/15] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v6 14/15] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v6 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v6 02/15] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v6 03/15] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v6 04/15] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v6 06/15] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v6 07/15] usb: phy: add notify suspend and resume callback   Peter Chen
• [PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Peter Chen
• [PATCH v6 14/15] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v6 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v6 01/15] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v6 01/15] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v6 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Peter Chen
• [PATCH v7 00/14] Add power management support for mxs phy   Peter Chen
• [PATCH v7 01/14] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v7 02/14] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v7 03/14] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v7 04/14] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v7 05/14] ARM: dts: imx6: add anatop phandle for usbphy   Peter Chen
• [PATCH v7 06/14] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v7 07/14] usb: phy-mxs: change description of usb device speed   Peter Chen
• [PATCH v7 08/14] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v7 09/14] ARM: dts: imx: add mxs phy controller id   Peter Chen
• [PATCH v7 10/14] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v7 11/14] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v7 12/14] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v7 13/14] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v7 14/14] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v7 07/14] usb: phy-mxs: change description of usb device speed   Peter Chen
• [PATCH v7 06/14] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v7 10/14] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v7 10/14] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v8 00/12] Add power management support for mxs phy   Peter Chen
• [PATCH v8 01/12] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v8 02/12] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v8 03/12] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v8 04/12] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v8 05/12] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v8 06/12] usb: phy-mxs: change description of usb device speed   Peter Chen
• [PATCH v8 07/12] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v8 08/12] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v8 09/12] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v8 10/12] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v8 11/12] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v8 12/12] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v8 11/12] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v9 00/12] Add power management support for mxs phy   Peter Chen
• [PATCH v9 01/12] usb: doc: phy-mxs: Add more compatible strings   Peter Chen
• [PATCH v9 02/12] usb: phy-mxs: Add platform judgement code   Peter Chen
• [PATCH v9 03/12] usb: phy-mxs: Add auto clock and power setting   Peter Chen
• [PATCH v9 04/12] usb: doc: phy-mxs: update binding for adding anatop phandle   Peter Chen
• [PATCH v9 05/12] usb: phy-mxs: Add anatop regmap   Peter Chen
• [PATCH v9 06/12] usb: phy-mxs: change description of usb device speed   Peter Chen
• [PATCH v9 07/12] usb: phy-mxs: Enable IC fixes for related SoCs   Peter Chen
• [PATCH v9 08/12] usb: phy-mxs: add controller id   Peter Chen
• [PATCH v9 09/12] usb: phy: Add set_wakeup API   Peter Chen
• [PATCH v9 10/12] usb: phy-mxs: Add implementation of set_wakeup   Peter Chen
• [PATCH v9 11/12] usb: phy-mxs: Add system suspend/resume API   Peter Chen
• [PATCH v9 12/12] usb: phy-mxs: Add sync time after controller clear phcd   Peter Chen
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Chanwoo Choi
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Chanwoo Choi
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Chanwoo Choi
• [PATCH 1/2] mmc: dw_mmc: add dw_mci_of_get_cd_gpio to handle cd pin   Jaehoon Chung
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Jaehoon Chung
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Jaehoon Chung
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Angus Clark
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Angus Clark
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Angus Clark
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Angus Clark
• [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Angus Clark
• [PATCH v3 04/36] mtd: st_spi_fsm: Supply framework for device requests   Angus Clark
• [PATCH v3 08/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands   Angus Clark
• [PATCH v3 08/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands   Angus Clark
• [PATCH v3 09/36] mtd: st_spi_fsm: Provide device look-up table   Angus Clark
• [PATCH v3 11/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations   Angus Clark
• [PATCH v3 11/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations   Angus Clark
• [PATCH 1/3] drm: Add LCD display clock polarity flags   Rob Clark
• [PATCH] dma-buf: avoid using IS_ERR_OR_NULL   Rob Clark
• [PATCH v2 6/7] drm/msm: Drop unnecessary mach include   Rob Clark
• [PATCH v2 6/7] drm/msm: Drop unnecessary mach include   Rob Clark
• [alsa-devel] [PATCH 3/3] ASoC: ux500: Dynamically fill DAI driver data on probe   Lars-Peter Clausen
• [alsa-devel] [PATCH 2/3] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lars-Peter Clausen
• [alsa-devel] [PATCH 1/3] ASoC: ux500_pcm: Stop pretending that we support varying address widths   Lars-Peter Clausen
• [alsa-devel] [PATCH 2/3] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lars-Peter Clausen
• [alsa-devel] [PATCH 3/3] ASoC: ux500: Dynamically fill DAI driver data on probe   Lars-Peter Clausen
• [alsa-devel] [PATCH 1/2] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lars-Peter Clausen
• [alsa-devel] [PATCH 1/2] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lars-Peter Clausen
• [alsa-devel] [PATCH 1/2] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lars-Peter Clausen
• [PATCH V2] dma: tegra: register as an OF DMA controller   Lars-Peter Clausen
• [PATCH v14] dmaengine: Add MOXA ART DMA engine driver   Lars-Peter Clausen
• [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci   Lars-Peter Clausen
• [PATCH 2/2] ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs   Richard Cochran
• [PATCH 2/2] ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs   Richard Cochran
• [PATCH 3/7] usb: dwc3: pci: add pm_runtime support   David Cohen
• [PATCH 3/7] usb: dwc3: pci: add pm_runtime support   David Cohen
• [PATCH 0/7] usb: dwc3: pm_runtime implementation   David Cohen
• [PATCH 0/7] usb: dwc3: pm_runtime implementation   David Cohen
• [PATCH v2] use -fstack-protector-strong   Kees Cook
• [PATCH v3] provide -fstack-protector-strong build option   Kees Cook
• [PATCH v3 1/2] create HAVE_CC_STACKPROTECTOR for centralized use   Kees Cook
• [PATCH v3 2/2] provide -fstack-protector-strong build option   Kees Cook
• [PATCH v4] provide -fstack-protector-strong build option   Kees Cook
• [PATCH v4 1/2] create HAVE_CC_STACKPROTECTOR for centralized use   Kees Cook
• [PATCH v4 2/2] provide -fstack-protector-strong build option   Kees Cook
• [PATCH v5] provide -fstack-protector-strong build option   Kees Cook
• [PATCH v5 1/2] create HAVE_CC_STACKPROTECTOR for centralized use   Kees Cook
• [PATCH v5 2/2] provide -fstack-protector-strong build option   Kees Cook
• [GIT PULL] clk: mvebu: for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: DT fixes for v3.13   Jason Cooper
• [GIT PULL] irqchip: dove: drivers for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: soc changes for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: DT changes for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: driver changes for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: defconfig changes for v3.14   Jason Cooper
• [PATCHv2 0/4] ARM: mvebu/kirkwood: NETGEAR ReadyNAS .dts files cleanup   Jason Cooper
• [PATCHv3] ARM: mvebu: Add Netgear ReadyNAS 2120 board   Jason Cooper
• [PATCHv0] ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2   Jason Cooper
• [PATCHv2 0/4] ARM: mvebu/kirkwood: NETGEAR ReadyNAS .dts files cleanup   Jason Cooper
• [PATCH V5] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH V6] kbuild: dtbs_install: new make target   Jason Cooper
• [PATCH v2 2/2] clk: add accuracy support for fixed clock   Jason Cooper
• [PATCH v2 2/2] clk: add accuracy support for fixed clock   Jason Cooper
• Spurious timeouts in mvmdio   Jason Cooper
• Spurious timeouts in mvmdio   Jason Cooper
• [PATCH 1/2] ARM: DT: Kirkwood: Use symbolic names from input.h   Jason Cooper
• [PATCH 1/2] ARM: DT: Kirkwood: Use symbolic names from input.h   Jason Cooper
• [GIT PULL] ARM: mvebu: DT changes for v3.14   Jason Cooper
• [GIT PULL] ARM: mvebu: DT changes for v3.14   Jason Cooper
• [PATCH 1/2] ARM: DT: Kirkwood: Use symbolic names from input.h   Jason Cooper
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Jason Cooper
• [PATCH v4 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Jason Cooper
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Jason Cooper
• [PATCH v2 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy.   Jason Cooper
• [PATCH v2 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY   Jason Cooper
• [GIT PULL] clk: mvebu: for v3.14   Jason Cooper
• Merge order in Armada 370/XP (mvebu) NAND support   Jason Cooper
• [PATCH] mtd: nand: pxa3xx: Disable "armada370-nand" compatible support   Jason Cooper
• [GIT PULL] ARM: mvebu: DT changes for v3.14 (set #2)   Jason Cooper
• [PATCH v4 2/4] mvebu: Dove: Instantiate cpufreq driver.   Jason Cooper
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Jason Cooper
• [PATCH v2 0/2] ARM: DT: Kirkwood: Use symbolic names   Jason Cooper
• [PATCH v2 0/4] PHY driver for Marvell SATA   Jason Cooper
• [PATCHv0 0/3] ARM: mvebu: Enable NAND controller in NETGEAR ReadyNAS .dts files   Jason Cooper
• [PATCH] mtd: nand: pxa3xx: Disable "armada370-nand" compatible support   Jason Cooper
• [PATCH] ARM: DT: Dove: Use symbolic names from gpio.h   Jason Cooper
• [PATCH] arm: plat-orion: remove deprecated IRQF_DISABLED   Jason Cooper
• [PATCH] Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"   Jason Cooper
• [GIT PULL] clk: mvebu: for v3.14   Jason Cooper
• [GIT PULL] irqchip: dove: drivers for v3.14   Jason Cooper
• [REGRESSION,BISECTED] DMA mask issue on ReadyNAS 102 w/ 3.13.0-rc3   Jason Cooper
• [PATCH 6/8] add support to supplement atags to device tree   Jason Cooper
• [PATCH 0/8] Impedance matcher for Samsung boards   Jason Cooper
• [REGRESSION,BISECTED] DMA mask issue on ReadyNAS 102 w/ 3.13.0-rc3   Jason Cooper
• [PATCH 6/8] add support to supplement atags to device tree   Jason Cooper
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Jason Cooper
• [REGRESSION,BISECTED] DMA mask issue on ReadyNAS 102 w/ 3.13.0-rc3   Jason Cooper
• [PATCH v5 0/3] Introduce atomic MMIO register modify   Jason Cooper
• [PATCH v5 2/3] clocksource: orion: Use atomic access for shared registers   Jason Cooper
• [PATCH v5 3/3] watchdog: orion: Use atomic access for shared registers   Jason Cooper
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Jason Cooper
• [PATCH] ARM: mvebu: Enable NAND controller in A370 Reference Design board   Jason Cooper
• [PATCH] ARM: mvebu: config: Enable NAND support   Jason Cooper
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Jason Cooper
• [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address   Jason Cooper
• [PATCH 1/4] ARM: kirkwood: sort dt nodes by address   Jason Cooper
• [PATCH 2/4] ARM: dove: sort DT nodes by address   Jason Cooper
• [PATCH 3/4] ARM: orion5x: sort DT nodes by address   Jason Cooper
• [PATCH 4/4] ARM: mvebu: sort DT nodes by address   Jason Cooper
• [PATCH v2] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Jason Cooper
• [PATCH] dma: mv_xor: fix kernel crash on probe error   Jason Cooper
• [PATCH 1/4] irqchip: armada-370-xp: fix IPI race condition   Jason Cooper
• [GIT PULL] ARM: mvebu: DT changes for v3.14 (incr #3)   Jason Cooper
• [PATCH 0/4] ARM: mvebu: sort DT nodes by reg address   Jason Cooper
• [GIT PULL] ARM: mvebu: DT changes for v3.14 (incr. #4)   Jason Cooper
• [GIT PULL] ARM: mvebu: defconfig changes for v3.14 (incr. #2)   Jason Cooper
• [GIT PULL] ARM: Initial support for Marvell Berlin SoCs   Jason Cooper
• [PATCH V2 2/8] string: fix strncmp function   Jason Cooper
• [PATCH V2 2/8] string: fix strncmp function   Jason Cooper
• [PATCH V2 2/8] string: fix strncmp function   Jason Cooper
• [PATCH V2 2/8] string: fix strncmp function   Jason Cooper
• Can someone Ack and queue a patch for RTC subsytem?   Jason Cooper
• Can someone Ack and queue a patch for RTC subsytem?   Jason Cooper
• Can someone Ack and queue a patch for RTC subsytem?   Jason Cooper
• Can someone Ack and queue a patch for RTC subsytem?   Jason Cooper
• Can someone Ack and queue a patch for RTC subsytem?   Jason Cooper
• Can someone Ack and queue a patch for RTC subsytem?   Jason Cooper
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Jason Cooper
• [PATCHv1 0/3] Enable ISL12057 RTC chip in ReadyNAS .dts files   Jason Cooper
• [PATCH 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy.   Jason Cooper
• [PATCH 3/4] SATA: MV: Add support for the optional PHYs   Jason Cooper
• [RFC PATCH v5 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Jason Cooper
• [RFC PATCH v5 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Jason Cooper
• [RFC PATCH v5 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Jason Cooper
• [PATCH 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY   Jason Cooper
• [PATCH] ARM: kirkwood: 6282: sort DT nodes by address   Jason Cooper
• [PATCHv8] rtc: Add support for Intersil ISL12057 I2C RTC chip   Jason Cooper
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Jason Cooper
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Jason Cooper
• [PATCH 3/3] ARM: mvebu: make armada_370_xp_pmsu_init() static   Jason Cooper
• [PATCH 1/3] ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h   Jason Cooper
• [PATCH 2/3] ARM: mvebu: fix register length for Armada XP PMSU   Jason Cooper
• [PATCH v3 1/2] ARM: Kirkwood: Add 6192 DTSI file   Jason Cooper
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Jason Cooper
• [PATCH 2/2] ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h   Jason Cooper
• [PATCH RFCv1 0/6] ARM: mvebu: coherency support improvements   Jason Cooper
• [PATCH RFCv1 0/6] ARM: mvebu: coherency support improvements   Jason Cooper
• [PATCH 0/3] dma: mv_xor: spinlock related improvements   Jason Cooper
• [PATCH RFCv1 0/6] ARM: mvebu: coherency support improvements   Jason Cooper
• [PATCH RFCv1 0/6] ARM: mvebu: coherency support improvements   Jason Cooper
• [PATCH RFCv1 1/6] ARM: mvebu: prepare coherency code to support more SOCs   Jason Cooper
• [PATCH RFCv1 2/6] ARM: mvebu: add a coherency_available() call   Jason Cooper
• [PATCH RFCv1 3/6] bus: mvebu: pass the coherency availability information at init time   Jason Cooper
• [PATCH RFCv1 5/6] ARM: mvebu: update Armada 370/XP DT to use new coherency compatible string   Jason Cooper
• [PATCH 0/2] ARM: mvebu: additional cleanups   Jason Cooper
• [GIT PULL] ARM: mvebu: DT changes for v3.14 (incr. #5)   Jason Cooper
• [GIT PULL] ARM: mvebu: drivers changes for v3.14 (incr. #2)   Jason Cooper
• [GIT PULL] ARM: mvebu: drivers changes for v3.14 (incr. #2)   Jason Cooper
• [PATCH] ARM: Kirkwood: Add support for Excito Bubba B3   Jason Cooper
• [PATCH] ARM: Kirkwood: Add support for Excito Bubba B3   Jason Cooper
• Openblocks AX3-4 i2c bus lockup   Jason Cooper
• [PATCH 3/9] ARM: fix ohci-pxa27x build error with OF enabled   Steve Cotton
• [PATCH v11 0/7] ARM: support for the Trusted Foundations secure monitor   Alexandre Courbot
• [PATCH v2] ARM: tegra: switch FUSE clock on before usage   Alexandre Courbot
• [PATCH 2/2] gpio: davinci: reuse for Keystone SoC   Alexandre Courbot
• [PATCH 1/3] ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module   Benoit Cousson
• [PATCH] ARM: dts: Add basic devices for AM3517-craneboard   Benoit Cousson
• [PATCH] ARM: dts: Add basic devices for AM3517-craneboard   Benoit Cousson
• Nemo on emulated Nokia n900 (qemu-arm)   Christopher Covington
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Christopher Covington
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Christopher Covington
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Christopher Covington
• [PATCH] dma-buf: avoid using IS_ERR_OR_NULL   Colin Cross
• [PATCH v4 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Peter Crosthwaite
• [PATCH v4 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Peter Crosthwaite
• [PATCH v5 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Peter Crosthwaite
• [PATCH v6 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Peter Crosthwaite
• [PATCH v7 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Peter Crosthwaite
• [PATCH V3 0/2] Exynos5250 SATA Support   Yuvaraj Kumar C D
• [PATCH V3 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Yuvaraj Kumar C D
• [PATCH V3 2/2] ARM: dts: Enable ahci sata and sata phy   Yuvaraj Kumar C D
• [RFC 1/5] usb: ohci-exynos: enable async suspend/resume   Yuvaraj Kumar C D
• [PATCH V4 0/2] Exynos5250 SATA Support   Yuvaraj Kumar C D
• [PATCH V4 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Yuvaraj Kumar C D
• [PATCH V4 2/2] ARM: dts: Enable ahci sata and sata phy   Yuvaraj Kumar C D
• [PATCH 06/12] pcie: designware: Move register definition to the header file   Mohit KUMAR DCG
• [PATCH 10/12] SPEAr13xx: defconfig: Update   Mohit KUMAR DCG
• [PATCH 06/12] pcie: designware: Move register definition to the header file   Mohit KUMAR DCG
• [PATCH 05/12] clk: SPEAr13xx: Fix pcie clock name   Mohit KUMAR DCG
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Mohit KUMAR DCG
• [PATCH 01/12] SPEAr13xx: Correct dt field name for stmmac phy-addr   Mohit KUMAR DCG
• [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to header file   Mohit KUMAR DCG
• [PATCH 09/12] pcie: SPEAr13xx: Add designware pcie support   Mohit KUMAR DCG
• [PATCH] pci: designware: fix missing msi irqs   Mohit KUMAR DCG
• [PATCH] ARM: mcpm: Make all mcpm functions notrace   Tarek Dakhran
• [PATCH v4 2/4] clk: exynos5410: register clocks using common clock framework   Tarek Dakhran
• [PATCH v5 0/3] Exynos 5410 support   Tarek Dakhran
• [PATCH 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Christoffer Dall
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Christoffer Dall
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Christoffer Dall
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Christoffer Dall
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Christoffer Dall
• [RESEND PATCH v2] arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Christoffer Dall
• [PATCH] ARM/KVM: inject data abort on unhandled memory access   Christoffer Dall
• [PATCH] ARM/KVM: inject data abort on unhandled memory access   Christoffer Dall
• [RESEND PATCH v2] arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Christoffer Dall
• [PATCH v4] ARM/KVM: save and restore generic timer registers   Christoffer Dall
• [PATCH v3 2/9] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Christoffer Dall
• [PATCH v3 3/9] KVM: arm-vgic: Set base addr through device API   Christoffer Dall
• [PATCH v3 6/9] KVM: arm-vgic: Add vgic reg access from dev attr   Christoffer Dall
• [PATCH v3 7/9] KVM: arm-vgic: Support unqueueing of LRs to the dist   Christoffer Dall
• [PATCH v3 8/9] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers   Christoffer Dall
• [PATCH v4] ARM/KVM: save and restore generic timer registers   Christoffer Dall
• [PATCH 00/10] Support VGIC save/restore using device control API   Christoffer Dall
• [PATCH 01/10] ARM: KVM: Allow creating the VGIC after VCPUs   Christoffer Dall
• [PATCH 02/10] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Christoffer Dall
• [PATCH 03/10] KVM: arm-vgic: Set base addr through device API   Christoffer Dall
• [PATCH 04/10] irqchip: arm-gic: Define additional MMIO offsets and masks   Christoffer Dall
• [PATCH 05/10] KVM: arm-vgic: Make vgic mmio functions more generic   Christoffer Dall
• [PATCH 06/10] arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_put   Christoffer Dall
• [PATCH 07/10] KVM: arm-vgic: Add vgic reg access from dev attr   Christoffer Dall
• [PATCH 08/10] KVM: arm-vgic: Support unqueueing of LRs to the dist   Christoffer Dall
• [PATCH 09/10] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers   Christoffer Dall
• [PATCH 10/10] KVM: arm-vgic: Support CPU interface reg access   Christoffer Dall
• [PATCH] arm: KVM: Don't return PSCI_INVAL if waitqueue is inactive   Christoffer Dall
• [RFC PATCH] arm/arm64: KVM: allow the use of THP on 2MB aligned memslots   Christoffer Dall
• [PATCH] arm/arm64: KVM: relax the requirements of VMA alignment for THP   Christoffer Dall
• [PATCH 00/10] Support VGIC save/restore using device control API   Christoffer Dall
• [PATCH] ARM/KVM: inject data abort on unhandled memory access   Christoffer Dall
• [PATCH] arm64: KVM: Force undefined exception for Guest SMC intructions   Christoffer Dall
• [PATCH RESEND] arm64: KVM: Add Kconfig option for max VCPUs per-Guest   Christoffer Dall
• [PATCH] KVM: Documentation: Fix typo for KVM_ARM_VCPU_INIT ioctl   Christoffer Dall
• [PATCH v2 0/2] PSCI system off and reset for KVM ARM/ARM64   Christoffer Dall
• [PATCH v2 1/2] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Christoffer Dall
• [PATCH v2 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Christoffer Dall
• [PATCH v5] ARM/KVM: save and restore generic timer registers   Christoffer Dall
• [PATCH v5] ARM/KVM: save and restore generic timer registers   Christoffer Dall
• [PATCH v2 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Christoffer Dall
• [PATCH 08/10] KVM: arm-vgic: Support unqueueing of LRs to the dist   Christoffer Dall
• [PATCH 02/10] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Christoffer Dall
• [PATCH v5 00/10] Support VGIC save/restore using device control API   Christoffer Dall
• [PATCH v5 01/10] ARM: KVM: Allow creating the VGIC after VCPUs   Christoffer Dall
• [PATCH v5 02/10] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Christoffer Dall
• [PATCH v5 03/10] KVM: arm-vgic: Set base addr through device API   Christoffer Dall
• [PATCH v5 04/10] irqchip: arm-gic: Define additional MMIO offsets and masks   Christoffer Dall
• [PATCH v5 05/10] KVM: arm-vgic: Make vgic mmio functions more generic   Christoffer Dall
• [PATCH v5 06/10] arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_put   Christoffer Dall
• [PATCH v5 07/10] KVM: arm-vgic: Add vgic reg access from dev attr   Christoffer Dall
• [PATCH v5 08/10] KVM: arm-vgic: Support unqueueing of LRs to the dist   Christoffer Dall
• [PATCH v5 09/10] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers   Christoffer Dall
• [PATCH v5 10/10] KVM: arm-vgic: Support CPU interface reg access   Christoffer Dall
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Christoffer Dall
• [PATCH v5] ARM/KVM: save and restore generic timer registers   Christoffer Dall
• [PATCH v2] arm: KVM: Don't return PSCI_INVAL if waitqueue is inactive   Christoffer Dall
• [RFC PATCH] KVM: arm/arm64: Clarify KVM_ARM_VCPU_INIT api   Christoffer Dall
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Christoffer Dall
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Christoffer Dall
• [PATCH 0/5] armv7 BE kvm support   Christoffer Dall
• [PATCH v5 00/10] Support VGIC save/restore using device control API   Christoffer Dall
• [PATCH 00/04] ARM: shmobile: Use SoC suffix for INTC compat string   Magnus Damm
• [PATCH] ARM: shmobile: Genmai SPI over GPIO support   Magnus Damm
• [PATCH] ARM: rcar-gen2: Do not attempt to re-setup timer if running correctly   Magnus Damm
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Magnus Damm
• [PATCH v2] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Magnus Damm
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sies   Magnus Damm
• [PATCH 00/04 v2] ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL V2   Magnus Damm
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Magnus Damm
• [PATCH 02/04] ARM: shmobile: Genmai SCIF2 PINCTRL configuration   Magnus Damm
• [PATCH 03/04] ARM: shmobile: Genmai LED1 and LED2 support   Magnus Damm
• [PATCH 04/04 v2] ARM: shmobile: Genmai I2C-over-GPIO support   Magnus Damm
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Magnus Damm
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Magnus Damm
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Magnus Damm
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Magnus Damm
• [PATCH 1/2] ARM: bcm_defconfig: CONFIG_OABI_COMPAT default off   Christian Daudt
• [PATCH 2/2] ARM: dts: bcm28155-ap: Enable all the i2c busses   Christian Daudt
• [PATCH v4 1/8] ARM: dts: Declare clocks as fixed on bcm11351   Christian Daudt
• [PATCH] ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16   Christian Daudt
• [PATCH 1/2] ARM: dts: bcm281xx: Add i2c busses   Christian Daudt
• [RESEND PATCH] ARM: bcm_defconfig: Do not expect appended DTB   Christian Daudt
• [PATCH 2/2] ARM: bcm_defconfig: Unset CONFIG_CRYPTO_ANSI_CPRNG   Christian Daudt
• [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig   Christian Daudt
• [PATCH v4 1/8] ARM: dts: Declare clocks as fixed on bcm11351   Christian Daudt
• [PATCH v4 2/8] ARM: dts: Specify clocks for UARTs on bcm11351   Christian Daudt
• [PATCH v4 3/8] Documentation: dt: kona-sdhci: Add clocks property   Christian Daudt
• [PATCH v4 8/8] ARM: dts: Specify clocks for timer on bcm11351   Christian Daudt
• [PATCH v4 4/8] ARM: dts: Specify clocks for SDHCIs on bcm11351   Christian Daudt
• [PATCH v2 2/4] rename ARCH_BCM to ARCH_BCM_MOBILE (clocksource)   Christian Daudt
• [PATCH v2 3/4] rename ARCH_BCM to ARCH_BCM_MOBILE (mmc)   Christian Daudt
• [PATCH v4 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks   Christian Daudt
• [PATCH v4 6/8] Documentation: dt: kona-timer: Add clocks property   Christian Daudt
• [PATCH v4 7/8] clocksource: kona: Add basic use of external clock   Christian Daudt
• [PATCH v8 9/9] ARM: dts: add usb udc support to bcm281xx   Christian Daudt
• [PATCH v4 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks   Christian Daudt
• [PATCH v2] dma: pl330: ensure DMA descriptors are zero-initialised   Will Deacon
• [PATCH v5 1/4] arm64: support single-step and breakpoint handler hooks   Will Deacon
• [PATCH v5 2/4] AArch64: KGDB: Add Basic KGDB support   Will Deacon
• [PATCH V6 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Will Deacon
• [PATCH V6 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• [PATCH] arm64: dts: Add a virtio disk to the RTSM motherboard   Will Deacon
• [PATCH v5 2/4] AArch64: KGDB: Add Basic KGDB support   Will Deacon
• [PATCH V6 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• [PATCH V6 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• [PATCH 1/3] arm64: add EFI stub   Will Deacon
• [PATCH] arm64: dts: Add a virtio disk to the RTSM motherboard   Will Deacon
• [PATCH RFC v4 1/6] arm64: support single-step and breakpoint handler hooks   Will Deacon
• [PATCHv6 05/13] iommu/core: add ops->{bound,unbind}_driver()   Will Deacon
• [GIT PULL] Cacheflush updates for 3.12   Will Deacon
• [PATCH] arm64: cmpxchg: update macros to prevent warnings   Will Deacon
• [GIT PULL] Cacheflush updates for 3.12   Will Deacon
• [PATCH v3 2/3] arm: Add [U]EFI runtime services support   Will Deacon
• [PATCH v2] ARM: add support for the Cortex-A12 processor   Will Deacon
• [PATCH] ARM: mcpm: remove redundant dsb instructions prior to sev   Will Deacon
• [GIT PULL] iommu: arm/smmu: fixes for 3.13   Will Deacon
• [PATCH V7 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Will Deacon
• [PATCH] arm64 ptrace.c   Will Deacon
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Will Deacon
• [PATCH v2] dma: pl330: ensure DMA descriptors are zero-initialised   Will Deacon
• [PATCHv3 2/2] arm64: Enable CMA   Will Deacon
• [PATCHv3 1/2] arm64: Check for NULL device before getting the coherent_dma_mask   Will Deacon
• [PATCH] arm64: Correct virt_addr_valid   Will Deacon
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Will Deacon
• [PATCH] arm64 ptrace.c   Will Deacon
• [PATCH] arm64: Correct virt_addr_valid   Will Deacon
• [PATCHv3 1/2] arm64: Check for NULL device before getting the coherent_dma_mask   Will Deacon
• [PATCH V7 2/2] arm64: perf: add support for percpu pmu interrupt   Will Deacon
• [PATCHv3 1/2] arm64: Check for NULL device before getting the coherent_dma_mask   Will Deacon
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Will Deacon
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Will Deacon
• [PATCH 1/3] ARM: mm: don't bother with reserved ttbr0 when running with LPAE   Will Deacon
• [PATCH 2/3] ARM: mm: keep track of last ASID allocation to improve bitmap searching   Will Deacon
• [PATCH 3/3] ARM: mm: flesh out and fix the comments in the ASID allocator   Will Deacon
• [PATCH] arm64: print cpu frequency in /proc/cpuinfo   Will Deacon
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Will Deacon
• [PATCH v6 6/7] arm64, jump label: optimize jump label implementation   Will Deacon
• [PATCH v6 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Will Deacon
• [PATCH v6 6/7] arm64, jump label: optimize jump label implementation   Will Deacon
• [PATCH v6 4/7] arm64: introduce aarch64_insn_gen_{nop|branch_imm}() helper functions   Will Deacon
• [PATCH v6 7/7] jump_label: use defined macros instead of hard-coding for better readability   Will Deacon
• [PATCH 1/2] arm: mm: fix dcache flush logic for compound high pages   Will Deacon
• [PATCH 5/5] arm64: Add LOAD_OFFSET symbol for linker scripts   Will Deacon
• [PATCH 2/5] arm64: Fix the soft_restart routine   Will Deacon
• [PATCH 4/5] arm64: Add missing AT() macros to vmlinux.lds.S   Will Deacon
• [PATCH V2] arm: mm: fix dcache flush logic for compound high pages   Will Deacon
• [PATCH 1/6] arm64: lib: Implement optimized memcpy routine   Will Deacon
• [PATCH 3/6] arm64: lib: Implement optimized memset routine   Will Deacon
• [PATCH 4/6] arm64: lib: Implement optimized memcmp routine   Will Deacon
• [PATCH 5/5] arm64: Add LOAD_OFFSET symbol for linker scripts   Will Deacon
• [PATCH 0/3] ARM64: add perf support   Will Deacon
• [PATCHv2 1/2] arm: Correct virt_addr_valid   Will Deacon
• [PATCH 1/4] arm64: drop redundant macros from read_cpuid()   Will Deacon
• [PATCH 1/2] ARM: dcache: select DCACHE_WORD_ACCESS for big-endian CPUs   Will Deacon
• [PATCH 2/2] ARM: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS for CPUv6+ && MMU   Will Deacon
• [PATCH] arm64: percpu: implement optimised pcpu access using tpidr_el1   Will Deacon
• [PATCH 1/4] arm64: use generic strnlen_user and strncpy_from_user functions   Will Deacon
• [PATCH 2/4] arm64: futex: ensure .fixup entries are sufficiently aligned   Will Deacon
• [PATCH 3/4] arm64: dcache: select DCACHE_WORD_ACCESS for little-endian CPUs   Will Deacon
• [PATCH 4/4] arm64: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS   Will Deacon
• [PATCH v3 [resend] 05/18] smp, ARM64: kill SMP single function call interrupt   Will Deacon
• [GIT PULL] iommu/arm-smmu: updates for 3.14   Will Deacon
• [PATCH RFC v3 08/12] arm64: kernel: implement HW breakpoints CPU PM notifier   Will Deacon
• [PATCHv3] arm: Correct virt_addr_valid   Will Deacon
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Jean Delvare
• possible regression on 3.13 when calling flush_dcache_page   Ludovic Desroches
• possible regression on 3.13 when calling flush_dcache_page   Ludovic Desroches
• possible regression on 3.13 when calling flush_dcache_page   Ludovic Desroches
• possible regression on 3.13 when calling flush_dcache_page   Ludovic Desroches
• [PATCH] i2c: at91: document clock properties   Ludovic Desroches
• possible regression on 3.13 when calling flush_dcache_page   Ludovic Desroches
• possible regression on 3.13 when calling flush_dcache_page   Ludovic Desroches
• [PATCH] ARM: tegra: convert device tree files to use key defines   Laxman Dewangan
• [PATCH 1/2] ARM: dts: tegra: Header file for pinctrl constants   Laxman Dewangan
• [PATCH 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines   Laxman Dewangan
• [PATCH 1/2] ARM: dts: tegra: Header file for pinctrl constants   Laxman Dewangan
• [PATCH V2 1/2] ARM: tegra: Add header file for pinctrl constants   Laxman Dewangan
• [PATCH V2 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines   Laxman Dewangan
• [PATCH] ARM: tegra: convert device tree files to use key defines   Laxman Dewangan
• [PATCH 1/2] ARM: dts: tegra: Header file for pinctrl constants   Laxman Dewangan
• [PATCH 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines   Laxman Dewangan
• [PATCH V3 0/4] ARM: tegra: convert dts files of all Tegra platforms to use pinctrl defines   Laxman Dewangan
• [PATCH V3 1/4] ARM: tegra: Add header file for pinctrl constants   Laxman Dewangan
• [PATCH V3 2/4] ARM: tegra: convert dts files of Tegra114 platforms to use pinctrl defines   Laxman Dewangan
• [PATCH V3 3/4] ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines   Laxman Dewangan
• [PATCH V3 4/4] ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines   Laxman Dewangan
• [PATCH 0/4] pinctrl: tegra: Add pincontrol driver for Tegra124 SoC   Laxman Dewangan
• [PATCH 1/4] pinctrl: tegra: Add devicetree binding document for Tegra124   Laxman Dewangan
• [PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi   Laxman Dewangan
• [PATCH 3/4] ARM: tegra: select PINCTRL_TEGRA124 for Tegra124 SoC   Laxman Dewangan
• [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124   Laxman Dewangan
• [PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi   Laxman Dewangan
• [PATCH 1/4] pinctrl: tegra: Add devicetree binding document for Tegra124   Laxman Dewangan
• [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124   Laxman Dewangan
• [PATCH V3 0/4] ARM: tegra: convert dts files of all Tegra platforms to use pinctrl defines   Laxman Dewangan
• [PATCH V2] ARM: tegra: add Tegra124 pinmux node to DT   Laxman Dewangan
• [PATCH] ARM: tegra: add default pinctrl nodes for Venice2   Laxman Dewangan
• [PATCH 1/2] ARM: tegra: enable ams AS3722 drivers   Laxman Dewangan
• [PATCH 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT   Laxman Dewangan
• [PATCH 1/2] ARM: tegra: enable ams AS3722 drivers   Laxman Dewangan
• [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2   Laxman Dewangan
• [PATCH 1/2] ARM: tegra: fix missing pincontrol configuration for Venice2   Laxman Dewangan
• [PATCH V2 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT   Laxman Dewangan
• [PATCH 1/2] ARM: tegra: fix missing pincontrol configuration for Venice2   Laxman Dewangan
• [PATCH V2 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT   Laxman Dewangan
• [PATCH V2 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT   Laxman Dewangan
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Laxman Dewangan
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Laxman Dewangan
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Laxman Dewangan
• [PATCH 00/10] ARM: tegra: DSI and panel support   Marc Dietrich
• [PATCH 1/2] drm/panel: Add support for Samsung LTN101NT05 panel   Marc Dietrich
• [PATCH 2/2] ARM: tegra: paz00: Add LVDS support to device tree   Marc Dietrich
• [PATCH 2/2] ARM: tegra: paz00: Add LVDS support to device tree   Marc Dietrich
• [PATCH 2/2] ARM: tegra: paz00: Add LVDS support to device tree   Marc Dietrich
• [PATCH 2/2] ARM: tegra: paz00: Add LVDS support to device tree   Marc Dietrich
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Dillon
• [PATCH] ARM: rcar-gen2: Do not setup timer in non-secure mode   Ben Dooks
• [PATCH] ARM: rcar-gen2: Do not setup timer in non-secure mode   Ben Dooks
• [PATCH] ARM: rcar-gen2: Do not attempt to re-setup timer if running correctly   Ben Dooks
• [PATCH] ARM: rcar-gen2: Do not attempt to re-setup timer if running correctly   Ben Dooks
• [V2] correct patch for renesas arm timer   Ben Dooks
• [PATCH] ARM: rcar-gen2: Do not setup timer in non-secure mode   Ben Dooks
• [PATCH] ARM: rcar-gen2: Do not attempt to re-setup timer if running correctly   Ben Dooks
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sies   Ben Dooks
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sies   Ben Dooks
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sies   Ben Dooks
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sies   Ben Dooks
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sizes   Ben Dooks
• [RFC][PATCHv6+++ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [RFC][PATCHv6+++ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCHv6 05/13] iommu/core: add ops->{bound,unbind}_driver()   Hiroshi Doyu
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCHv7 00/12] Unifying SMMU driver among Tegra SoCs   Hiroshi Doyu
• [PATCHv7 01/12] of: introduce of_property_for_each_phandle_with_args()   Hiroshi Doyu
• [PATCHv7 02/12] iommu/of: introduce a global iommu device list   Hiroshi Doyu
• [PATCHv7 03/12] iommu/of: check if dependee iommu is ready or not   Hiroshi Doyu
• [PATCHv7 04/12] driver/core: populate devices in order for IOMMUs   Hiroshi Doyu
• [PATCHv7 05/12] iommu/core: add ops->{bound,unbind}_driver()   Hiroshi Doyu
• [PATCHv7 06/12] ARM: tegra: create a DT header defining SWGROUP ID   Hiroshi Doyu
• [PATCHv7 07/12] iommu/tegra: smmu: register device to iommu dynamically   Hiroshi Doyu
• [PATCHv7 08/12] iommu/tegra: smmu: calculate ASID register offset by ID   Hiroshi Doyu
• [PATCHv7 09/12] iommu/tegra: smmu: get swgroups from DT "iommus="   Hiroshi Doyu
• [PATCHv7 10/12] iommu/tegra: smmu: allow duplicate ASID wirte   Hiroshi Doyu
• [PATCHv7 11/12] iommu/tegra: smmu: Rename hwgrp -> swgroups   Hiroshi Doyu
• [PATCHv7 12/12] iommu/tegra: smmu: add SMMU to an global iommu list   Hiroshi Doyu
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCHv7 04/12] driver/core: populate devices in order for IOMMUs   Hiroshi Doyu
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Hiroshi Doyu
• [PATCH] ARM: bcm2835: Fix grammar in help message   Randy Dunlap
• [ARM] Fix kernel compile error: drivers/crypto/ixp4xx_crypto.c.   Randy Dunlap
• [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCHv2 0/4] ARM: mvebu/kirkwood: NETGEAR ReadyNAS .dts files cleanup   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCH 1/2] ARM: DT: Kirkwood: Use symbolic names from input.h   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCH v5 00/14] Armada 370/XP NAND support   Arnaud Ebalard
• [PATCHv0 0/3] ARM: mvebu: Enable NAND controller in NETGEAR ReadyNAS .dts files   Arnaud Ebalard
• [PATCHv0 2/3] ARM: mvebu: Enable NAND controller in ReadyNAS 104 .dts file   Arnaud Ebalard
• [PATCHv0 1/3] ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file   Arnaud Ebalard
• [PATCHv0 3/3] ARM: mvebu: Enable NAND controller in ReadyNAS 2120 .dts file   Arnaud Ebalard
• [REGRESSION,BISECTED] DMA mask issue on ReadyNAS 102 w/ 3.13.0-rc3   Arnaud Ebalard
• [REGRESSION, BISECTED] DMA mask issue on ReadyNAS 102 w/ 3.13.0-rc3   Arnaud Ebalard
• [PATCHv3,RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv3, RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv4] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv4] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv4] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv5] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv5,RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv5, RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv6] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• Can someone Ack and queue a patch for RTC subsytem?   Arnaud Ebalard
• Can someone Ack and queue a patch for RTC subsytem?   Arnaud Ebalard
• Can someone Ack and queue a patch for RTC subsytem?   Arnaud Ebalard
• Can someone Ack and queue a patch for RTC subsytem?   Arnaud Ebalard
• [PATCHv7] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv1 0/3] Enable ISL12057 RTC chip in ReadyNAS .dts files   Arnaud Ebalard
• [PATCHv1 1/3] ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 102 .dts file   Arnaud Ebalard
• [PATCHv1 2/3] ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 104 .dts file   Arnaud Ebalard
• [PATCHv1 3/3] ARM: mvebu: Enable ISL12057 RTC chip in ReadyNAS 2120 .dts file   Arnaud Ebalard
• [rtc-linux] Re: Can someone Ack and queue a patch for RTC subsytem?   Arnaud Ebalard
• [PATCHv7] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [PATCHv8] rtc: Add support for Intersil ISL12057 I2C RTC chip   Arnaud Ebalard
• [rtc-linux] Re: Can someone Ack and queue a patch for RTC subsytem?   Arnaud Ebalard
• [PATCH 0/3] clk: bcm281xx: define Broadcom kona clocks   Alex Elder
• [PATCH 1/3] clk: bcm281xx: define kona clock binding   Alex Elder
• [PATCH 2/3] clk: bcm281xx: add initial clock framework support   Alex Elder
• [PATCH 3/3] ARM: dts: bcm281xx: define real clocks   Alex Elder
• [PATCH 1/3] clk: bcm281xx: define kona clock binding   Alex Elder
• [PATCH 2/3] clk: bcm281xx: add initial clock framework support   Alex Elder
• [PATCH 3/3] ARM: dts: bcm281xx: define real clocks   Alex Elder
• [PATCH 2/3] clk: bcm281xx: add initial clock framework support   Alex Elder
• [PATCH v2 0/3] clk: bcm281xx: define Broadcom kona clocks   Alex Elder
• [PATCH v2 1/3] clk: bcm281xx: define kona clock binding   Alex Elder
• [PATCH v2 2/3] clk: bcm281xx: add initial clock framework support   Alex Elder
• [PATCH v2 3/3] ARM: dts: bcm281xx: define real clocks   Alex Elder
• [PATCH 1/3] clk: bcm281xx: define kona clock binding   Alex Elder
• [PATCH v2 0/3] clk: bcm281xx: define Broadcom kona clocks   Alex Elder
• [PATCH v2 2/3] clk: bcm281xx: add initial clock framework support   Alex Elder
• [PATCH v2 2/3] clk: bcm281xx: add initial clock framework support   Alex Elder
• [PATCH v2 2/3] clk: bcm281xx: add initial clock framework support   Alex Elder
• [PATCH v3 3/3] ARM: dts: bcm281xx: define real clocks   Alex Elder
• [GIT PULL] clk: initial support for Broadcom Kona clocks   Alex Elder
• [PATCH] clk: support hardware-specific debugfs entries   Alex Elder
• [PATCH] clk: support hardware-specific debugfs entries   Alex Elder
• [PATCH] clk: support hardware-specific debugfs entries   Alex Elder
• [PATCH] clk: support hardware-specific debugfs entries   Alex Elder
• [PATCH 0/2] pcmcia: small fixes for sa1111 machine code   Dmitry Eremin-Solenikov
• [PATCH v2 0/5]   Dmitry Eremin-Solenikov
• [PATCH] arm: sa1100: collie: add support for IrDA transceiver   Dmitry Eremin-Solenikov
• [PATCH] ARM: debug: move StrongARM debug include to arch/arm/include/debug   Dmitry Eremin-Solenikov
• [PATCH] gpio-charger: support wakeup events   Dmitry Eremin-Solenikov
• [PATCH] arm: sa1100: collie: add gpio-keys configuration   Dmitry Eremin-Solenikov
• [PATCH v3 00/10] ARM: sa1100: improve irq handling   Dmitry Eremin-Solenikov
• [PATCH v3 01/10] ARM: sa1100: switch to MULTI_IRQ_HANDLER   Dmitry Eremin-Solenikov
• [PATCH v3 02/10] ARM: sa1100: drop entry-macro.S   Dmitry Eremin-Solenikov
• [PATCH v3 03/10] ARM: sa1100: add platform functions to handle PWER settings   Dmitry Eremin-Solenikov
• [PATCH v3 04/10] arm: sa1100: use new functions that hide PWER access   Dmitry Eremin-Solenikov
• [PATCH v3 05/10] arm: sa1100: use ioremap'ped access instead of direct register access   Dmitry Eremin-Solenikov
• [PATCH v3 06/10] ARM: sa1100: enable IRQ domains   Dmitry Eremin-Solenikov
• [PATCH v3 07/10] arm: sa1100: introduce irqdomains support   Dmitry Eremin-Solenikov
• [PATCH v3 08/10] arm: sa1100: merge IRQ 11 to "normal" irq domain   Dmitry Eremin-Solenikov
• [PATCH v3 09/10] arm: sa1100: switch to hwirq usage   Dmitry Eremin-Solenikov
• [PATCH v3 10/10] ARM: locomo: don't clobber chip data for chained irq   Dmitry Eremin-Solenikov
• [PATCH v3 00/10] ARM: sa1100: improve irq handling   Dmitry Eremin-Solenikov
• [PATCH 2/2] ARM: imx: update imx_v6_v7_defconfig   Fabio Estevam
• [PATCH V3 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Fabio Estevam
• [PATCH V3 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl: Use 'vddarm' as the regulator name   Fabio Estevam
• [PATCH 1/2] spi: spi-imx: enable dma support for escpi controller   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl: Pass "fsl,imx6q-mmdc" to MMDC1 port   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support   Fabio Estevam
• [PATCH 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support   Fabio Estevam
• [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support   Fabio Estevam
• [PATCH v2 2/2] ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100   Fabio Estevam
• [PATCH] ARM: imx_v6_v7_defconfig: Select PCI support   Fabio Estevam
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Florian Fainelli
• [PATCH RFCv2 5/6] net: phy: suspend unused PHYs on mdio_bus in late_initcall   Florian Fainelli
• [PATCH RFCv2 3/6] net: phy: provide phy_resume/phy_suspend helpers   Florian Fainelli
• [PATCH RFCv2 0/6] net: phy: Ethernet PHY powerdown optimization   Florian Fainelli
• MCS8142   Florian Fainelli
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Florian Fainelli
• [PATCH 08/10] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC   Florian Fainelli
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Florian Fainelli
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Florian Fainelli
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Florian Fainelli
• [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support   Florian Fainelli
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Florian Fainelli
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Joel Fernandes
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Joel Fernandes
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Joel Fernandes
• [PATCH] rtc: rtc-at91rm9200: Corrected alarm over day/month wrap:   Nicolas Ferre
• [PATCH] arm: at91: sama5d3: enable qt1070 as a wakeup source   Nicolas Ferre
• [PATCH 1/2] ARM: at91: at91sam9g45: set default mmc pinctrl-names   Nicolas Ferre
• [PATCH v2] ARM: at91: sama5d3: reduce TWI internal clock frequency   Nicolas Ferre
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Nicolas Ferre
• [PATCH 1/2] ARM: AT91: Animeo IP: fix mtd partition table   Nicolas Ferre
• [PATCH] ARM: at91: add usart3 alias to dtsi   Nicolas Ferre
• [PATCH v2] ARM: at91: sama5d3: reduce TWI internal clock frequency   Nicolas Ferre
• [PATCH] fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM   Nicolas Ferre
• [PATCH] ARM: at91: add usart3 alias to dtsi   Nicolas Ferre
• [PATCH v2] ARM: at91: add usart3 alias to dtsi   Nicolas Ferre
• [PATCH v6 00/16] ARM: at91: move to common clk framework   Nicolas Ferre
• [PATCH] fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM   Nicolas Ferre
• [GIT PULL] at91: fixes 3.13 #2   Nicolas Ferre
• [PATCH v4 0/6] ARM: at91: use new at91 clks for samad3 SoCs   Nicolas Ferre
• [PATCH] ARM: at91: add uart aliases to sama5d3 dtsi   Nicolas Ferre
• [PATCH] ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT   Nicolas Ferre
• [GIT PULL] at91: cleanup for 3.14 #1 (aka move to CCF)   Nicolas Ferre
• [PATCH 1/3] usb: ohci-at91: fix irq and iomem resource retrieval   Nicolas Ferre
• [PATCH 2/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap   Nicolas Ferre
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   Nicolas Ferre
• [PATCH 5/4 v2] ARM: at91: don't use <mach/timex.h>   Nicolas Ferre
• [PATCH] ARM: at91: remove redundant dependency   Nicolas Ferre
• [GIT PULL] at91: cleanup for 3.14 #1 (aka move to CCF)   Nicolas Ferre
• [PATCH 4/4] ARM: at91: localize GPIO header   Nicolas Ferre
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Nicolas Ferre
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Nicolas Ferre
• [PATCH 2/3] pinctrl: at91: initialize config parameter to 0   Nicolas Ferre
• [GIT PULL] at91: soc updates for 3.14 #1   Nicolas Ferre
• [Patch v2 2/2] ASoC: atmel: sam9x5_wm8731: remove platform_set_drvdata   Nicolas Ferre
• [PATCH 00/11] ARM: at91: DT: switch C board to DT   Nicolas Ferre
• [PATCH] ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order   Nicolas Ferre
• [GIT PULL] at91: dt for 3.14 #1   Nicolas Ferre
• [PATCH v2 0/5] net: macb updates   Nicolas Ferre
• [PATCH] ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration option   Nicolas Ferre
• [PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show   Nicolas Ferre
• [GIT PULL] at91: drivers for 3.14 #1   Nicolas Ferre
• [PATCH 11/11] ARM: at91: switch Calao QIL-A9260 board to DT   Nicolas Ferre
• [PATCH v2 11/11] ARM: at91: switch Calao QIL-A9260 board to DT   Nicolas Ferre
• [PATCH 1/2] pinctrl: at91: fix clk_unprepare and clk_disable order   Nicolas Ferre
• [PATCH 2/2] pinctrl: at91: replace clk_prepare + clk_enable by clk_prepare_enable   Nicolas Ferre
• linux-next: manual merge of the renesas tree with the arm-soc tree   Nicolas Ferre
• [PATCH] clk: at91: fix pmc_clk_ids data type attriubte   Nicolas Ferre
• [PATCH] clk: at91: fix pmc_clk_ids data type attriubte   Nicolas Ferre
• [PATCH] i2c: at91: document clock properties   Nicolas Ferre
• [PATCH] spi/atmel: document clock properties   Nicolas Ferre
• [PATCH] drivers/misc: atmel-ssc: document clock properties   Nicolas Ferre
• [PATCH] iio: at91: document ADC clock properties   Nicolas Ferre
• [PATCH 0/3] ARM: at91/dt: add clock properties to sama5d3 crypto devs   Nicolas Ferre
• [GIT PULL] at91: dt for 3.14 #2   Nicolas Ferre
• [RFC PATCH] clk: samsung: add support for multiple clock providers   Tomasz Figa
• [RFC PATCH] clk: samsung: add support for multiple clock providers   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Tomasz Figa
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   Tomasz Figa
• [PATCH v3] usb: ohci-at91: fix irq and iomem resource retrieval   Tomasz Figa
• [PATCH] MAINTAINERS: Add entry for Samsung SoC clock drivers   Tomasz Figa
• [GIT PULL] s3c64xx dmaengine conversion   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Tomasz Figa
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Tomasz Figa
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Tomasz Figa
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Tomasz Figa
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Tomasz Figa
• [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode   Tomasz Figa
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Tomasz Figa
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Tomasz Figa
• [PATCH 1/3] ARM: EXYNOS: pmu: Constify data tables   Tomasz Figa
• [PATCH 2/3] ARM: SAMSUNG: Let s3c_pm_do_restore_*() take const sleep_save   Tomasz Figa
• [PATCH 1/1] clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll   Tomasz Figa
• [PATCH] clk: samsung: exynos4: Correct SRC_MFC register   Tomasz Figa
• [PATCH 1/3] ARM: dts: Leave Exynos5250 SPI controller disabled by default   Tomasz Figa
• [PATCH 1/3] ARM: EXYNOS: pmu: Constify data tables   Tomasz Figa
• [PATCH v4 2/4] clk: exynos5410: register clocks using common clock framework   Tomasz Figa
• [PATCH v3 3/5] dt-bindings: add binding for clock-controller of s3c2443 and following   Tomasz Figa
• [PATCH v3 5/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Tomasz Figa
• [PATCH v3 0/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Tomasz Figa
• [RFC v2 1/4] power: asv: Add common ASV support for Samsung SoCs   Tomasz Figa
• [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Tomasz Figa
• [PATCH 1/7] ARM: EXYNOS: initial board support for exynos5260 SoC   Tomasz Figa
• [PATCH 2/7] pinctrl: exynos: add exynos5260 SoC specific data   Tomasz Figa
• [PATCH 3/7] ARM: dts: add dts files for exynos5260 SoC   Tomasz Figa
• [PATCH 4/7] clk/samsung: add support for multuple clock providers   Tomasz Figa
• [PATCH 3/5] clk: max77686: Replace is_enabled() with is_prepared call-back   Tomasz Figa
• [PATCH 2/5] ARM: EXYNOS5: Fix PMU register configuration for local power blocks   Tomasz Figa
• [PATCH 0/5] Power Related Fixes for Exynos5250   Tomasz Figa
• [PATCH 0/8] Impedance matcher for Samsung boards   Tomasz Figa
• [PATCH 1/5] clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock   Tomasz Figa
• [PATCH CFT] ARM:S5P64X0: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Tomasz Figa
• [PATCH 1/5] clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock   Tomasz Figa
• [PATCH CFT] ARM:S5P64X0: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Tomasz Figa
• [PATCH v2 0/8] clk: max77686: Clock provider implementation fixes   Tomasz Figa
• [PATCH v2 1/8] clk: max77686: Correct callback used for checking clock status   Tomasz Figa
• [PATCH v2 2/8] clk: max77686: Provide .recalc_rate() operation   Tomasz Figa
• [PATCH v2 3/8] clk: max77686: Refactor successful exit of probe function   Tomasz Figa
• [PATCH v2 4/8] clk: max77686: Make max77686_clk_register() return struct clk *   Tomasz Figa
• [PATCH v2 5/8] clk: max77686: Fix clean-up in error and remove paths   Tomasz Figa
• [PATCH v2 6/8] clk: max77686: Refactor driver data handling   Tomasz Figa
• [PATCH v2 7/8] clk: max77686: Register OF clock provider   Tomasz Figa
• [PATCH v2 8/8] ARM: dts: Add clock provider specific properties to max77686 node   Tomasz Figa
• [PATCH v3 0/6] Exynos device tree clean-up for 3.14   Tomasz Figa
• [PATCH v3 1/6] Documentation: devicetree: Update Exynos MCT bindings description   Tomasz Figa
• [PATCH v3 2/6] ARM: dts: exynos4: Drop interrupt controller properties from MCT nodes   Tomasz Figa
• [PATCH v3 3/6] ARM: dts: exynos4x12: Move MCT node to exynos4x12.dtsi   Tomasz Figa
• [PATCH v3 4/6] ARM: dts: exynos4: Simplify MCT interrupt map   Tomasz Figa
• [PATCH v3 5/6] ARM: dts: exynos: Fix missing spaces after labels   Tomasz Figa
• [PATCH v3 6/6] ARM: dts: exynos4: Add missing unit-address of sysreg node   Tomasz Figa
• [PATCH 0/3] DW-MSHC support on Exynos4412-TRATS2 board   Tomasz Figa
• [PATCH 1/3] clk: samsung: exynos4: Fix definition of div_mmc_pre4 divider   Tomasz Figa
• [PATCH 2/3] ARM: dts: exynos4x12: Fix definition of MSHC device tree nodes   Tomasz Figa
• [PATCH 3/3] ARM: dts: exynos4412-trats2: Use MSHC controller for eMMC memory   Tomasz Figa
• [PATCH CFT] ARM:S5P64X0: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Tomasz Figa
• [PATCH 1/2] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Tomasz Figa
• [PATCH 2/2 v2] ARM: s3c64xx: get rid of custom <mach/gpio.h>   Tomasz Figa
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Tomasz Figa
• [PATCH] ARM: s3c64xx: Do not select both CPU_V6 and CPU_V6K at the same time   Tomasz Figa
• [PATCH] ARM: s3c64xx: mini6410: Correct card detect type for HSMMC1   Tomasz Figa
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Tomasz Figa
• [PATCH v2 1/1] ARM: dts: Add missing clocks for exynos4412 dwmmc node   Tomasz Figa
• [PATCH] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Tomasz Figa
• [RFC v2 1/4] power: asv: Add common ASV support for Samsung SoCs   Tomasz Figa
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Tomasz Figa
• [GIT PULL 1/7] Samsung fixes for v3.14   Tomasz Figa
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Tomasz Figa
• [GIT PULL 1/7] Samsung fixes for v3.14   Tomasz Figa
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Tomasz Figa
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Tomasz Figa
• [PATCH 3/3] ARM: dts: Fix MDMA0 clock number   Tomasz Figa
• [PATCH] clk: samsung: exynos4: Correct SRC_MFC register   Tomasz Figa
• [PATCH v2 1/1] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Tomasz Figa
• [PATCH 1/2] ARM: EXYNOS: Add initial support of PMU for Exynos5260   Tomasz Figa
• [PATCH 2/2] ARM: EXYNOS: Add CMU virtual addresses for exynos5260   Tomasz Figa
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Tomasz Figa
• [PATCH v3 6/6] ARM: dts: exynos4: Add missing unit-address of sysreg node   Tomasz Figa
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Tomasz Figa
• [PATCH 6/7] clk/samsung: add support for pll2650xx   Tomasz Figa
• [PATCH 5/7] clk/samsung: add support for pll2550xx   Tomasz Figa
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Tomasz Figa
• [PATCH] ARM: dts: add clock provider for mshc node for Exynos4412 SOC   Tomasz Figa
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Tomasz Figa
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Tomasz Figa
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Tomasz Figa
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Tomasz Figa
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Tomasz Figa
• [PATCH 1/3] clk/exynos5420: cleanup clock file   Tomasz Figa
• [PATCH 2/3] ARM: dts: replace clock numbers with macros for exynos5420   Tomasz Figa
• [GIT PULL 7/7] Samsung SoC for v3.14   Tomasz Figa
• [PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Tomasz Figa
• [PATCH RFC 01/11] ARM: SAMSUNG: Add soc_is_s3c2410() helper   Tomasz Figa
• [PATCH RFC 02/11] ARM: SAMSUNG: pm: Save UART DIVSLOT register based on SoC type   Tomasz Figa
• [PATCH RFC 03/11] ARM: SAMSUNG: pm: Use debug_ll_addr() to get UART base address   Tomasz Figa
• [PATCH RFC 04/11] ARM: SAMSUNG: pm: Consolidate PM debug functions   Tomasz Figa
• [PATCH RFC 05/11] ARM: SAMSUNG: pm: Move Samsung PM debug code into separate file   Tomasz Figa
• [PATCH RFC 06/11] ARM: SAMSUNG: Move common save/restore helpers to separate file   Tomasz Figa
• [PATCH RFC 07/11] ARM: SAMSUNG: pm: Move s3c_pm_check_* prototypes to plat/pm-common.h   Tomasz Figa
• [PATCH RFC 08/11] ARM: EXYNOS: Kconfig: Fix abuse of CONFIG_PM   Tomasz Figa
• [PATCH RFC 09/11] ARM: EXYNOS: Remove PM initcalls and useless indirection   Tomasz Figa
• [PATCH RFC 10/11] ARM: dts: exynos4: Add node for L2 cache controller   Tomasz Figa
• [PATCH RFC 11/11] ARM: EXYNOS: Stop using legacy Samsung PM code   Tomasz Figa
• [PATCH 3/3] ARM: dts: Fix MDMA0 clock number   Tomasz Figa
• [PATCH v2 0/8] clk: max77686: Clock provider implementation fixes   Tomasz Figa
• [PATCH 1/5] clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock   Tomasz Figa
• [PATCH] clk: samsung: exynos4: Correct SRC_MFC register   Tomasz Figa
• [PATCH] clk: exynos: File scope reg_save array should depend on PM_SLEEP   Tomasz Figa
• [PATCH Resend 1/1] clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll   Tomasz Figa
• [PATCH V5 2/6] Add shared update_fdt() function for ARM/ARM64   Roy Franz
• [PATCH 1/3] arm64: add EFI stub   Roy Franz
• [PATCH V5 2/6] Add shared update_fdt() function for ARM/ARM64   Roy Franz
• [PATCH V5 4/6] Add EFI stub for ARM   Roy Franz
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Roy Franz
• [PATCH] spi:fsl-dspi:add support of DSPI IP in big endian   Chao Fu
• [PATCH RFC 1/2] Documentation: arm: add cache DT bindings   Kumar Gala
• [PATCH RFC 1/2] Documentation: arm: add cache DT bindings   Kumar Gala
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Kumar Gala
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Kumar Gala
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Kumar Gala
• Build warning in drivers/dma/mmp_tdma.c   Zhangfei Gao
• Build warning in drivers/dma/mmp_tdma.c   Zhangfei Gao
• [PATCH 1/2] mmc: dw_mmc: add dw_mci_of_get_cd_gpio to handle cd pin   Zhangfei Gao
• Build warning in drivers/dma/mmp_tdma.c   Zhangfei Gao
• Build warning in drivers/dma/mmp_tdma.c   Zhangfei Gao
• Build warning in drivers/dma/mmp_tdma.c   Zhangfei Gao
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH v4 0/3] mmc: dw_mmc: add dw_mmc-k3   Zhangfei Gao
• [PATCH 1/3] mmc: dw_mmc: use slot-gpio to handle cd pin   Zhangfei Gao
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH 3/3] clk: hisilicon: add hi3620_mmc_clks   Zhangfei Gao
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH v5 0/3] mmc: dw_mmc: add dw_mmc-k3   Zhangfei Gao
• [PATCH 1/3] mmc: dw_mmc: use slot-gpio to handle cd pin   Zhangfei Gao
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH 3/3] clk: hisilicon: add hi3620_mmc_clks   Zhangfei Gao
• [PATCHv6 1/5] mmc: dw_mmc: Add support to set the SDR and DDR timing through clock framework   Zhangfei Gao
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH v6 0/3] mmc: dw_mmc: add dw_mmc-k3   Zhangfei Gao
• [PATCH 1/3] mmc: dw_mmc: use slot-gpio to handle cd pin   Zhangfei Gao
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH 3/3] clk: hisilicon: add hi3620_mmc_clks   Zhangfei Gao
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Zhangfei Gao
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND supportg   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• Merge order in Armada 370/XP (mvebu) NAND support   Ezequiel Garcia
• [PATCH v5 00/14] Armada 370/XP NAND support   Ezequiel Garcia
• Merge order in Armada 370/XP (mvebu) NAND support   Ezequiel Garcia
• [PATCH] mtd: nand: pxa3xx: Disable "armada370-nand" compatible support   Ezequiel Garcia
• [PATCH] mtd: nand: pxa3xx: Disable "armada370-nand" compatible support   Ezequiel Garcia
• [PATCH] mtd: nand: pxa3xx: Disable "armada370-nand" compatible support   Ezequiel Garcia
• [PATCH] Partially revert "mtd: nand: pxa3xx: Introduce 'marvell, armada370-nand' compatible string"   Ezequiel Garcia
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Ezequiel Garcia
• [PATCH v5 0/3] Introduce atomic MMIO register modify   Ezequiel Garcia
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Ezequiel Garcia
• [PATCH v5 2/3] clocksource: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH v5 3/3] watchdog: orion: Use atomic access for shared registers   Ezequiel Garcia
• [PATCH] Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"   Ezequiel Garcia
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Ezequiel Garcia
• [PATCH] ARM: mvebu: Enable NAND controller in A370 Reference Design board   Ezequiel Garcia
• [PATCH] ARM: mvebu: config: Enable NAND support   Ezequiel Garcia
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Ezequiel Garcia
• [PATCH v5 0/3] Introduce atomic MMIO register modify   Ezequiel Garcia
• [PATCH] ARM: configs: Select USB PHY for AM335x SoC   Ezequiel Garcia
• [PATCH] Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"   Ezequiel Garcia
• [PATCH] Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"   Ezequiel Garcia
• [PATCH] ARM: configs: Select USB PHY for AM335x SoC   Ezequiel Garcia
• [GIT PULL] clk: mvebu: for v3.14   Ezequiel Garcia
• [PATCH] usb: musb: Remove USB_GADGET driver dependency   Ezequiel Garcia
• [PATCH] usb: musb: Remove USB_GADGET driver dependency   Ezequiel Garcia
• [GIT PULL] clk: mvebu: for v3.14   Ezequiel Garcia
• [PATCH 2/2] ARM: Kirkwood: DT board setup for LaPlug   Ezequiel Garcia
• [PATCH] ARM: configs: Select USB PHY for AM335x SoC   Ezequiel Garcia
• [PATCH] ARM: configs: Select USB PHY for AM335x SoC   Ezequiel Garcia
• [PATCH 0/3] dma: mv_xor: spinlock related improvements   Ezequiel Garcia
• [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Matthew Garrett
• [RFC part1 PATCH 3/7] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Matthew Garrett
• [RFC part1 PATCH 3/7] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Matthew Garrett
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Matthew Garrett
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Matthew Garrett
• [PATCH v4 3/5] ACPI: HW reduced mode does not allow use of the FADT sci_interrupt field   Matthew Garrett
• [PATCH v4 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   Matthew Garrett
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Vivek Gautam
• [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode   Richard Genoud
• [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops   Richard Genoud
• [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode   Richard Genoud
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   Douglas Gilbert
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Douglas Gilbert
• Can't boot newer kernel on Armada 370 dev board   Rodolfo Giometti
• Can't boot newer kernel on Armada 370 dev board   Rodolfo Giometti
• Can't boot newer kernel on Armada 370 dev board   Rodolfo Giometti
• [PATCH V7 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Thomas Gleixner
• ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)   Thomas Gleixner
• ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)   Thomas Gleixner
• ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)   Thomas Gleixner
• [PATCH v2 4/9] clocksource/cadence_ttc: Use enable/disable_irq   Thomas Gleixner
• [GIT PULL] Cacheflush updates for 3.12   Christian Gmeiner
• [GIT PULL] Cacheflush updates for 3.12   Christian Gmeiner
• [GIT PULL] Cacheflush updates for 3.12   Christian Gmeiner
• imx-drm: possible circular locking dependency detected   Christian Gmeiner
• [Xen-devel] [PATCH] xen/block: Correctly define structures in public headers on ARM32 and ARM64   One Thousand Gnomes
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   One Thousand Gnomes
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   One Thousand Gnomes
• [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   One Thousand Gnomes
• [RFC part1 PATCH 3/7] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   One Thousand Gnomes
• [RFC part1 PATCH 4/7] ARM64 / ACPI: Introduce the skeleton of _PDC related for ARM64   One Thousand Gnomes
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   One Thousand Gnomes
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   One Thousand Gnomes
• [PATCHv2 1/3] ARM: imx27: add pwm pingrp   Gwenhael Goavec-Merou
• [PATCHv2 2/3] ARM: dts: apf27dev: Add pwm support   Gwenhael Goavec-Merou
• [PATCHv2 3/3] ARM: dts: imx27-apf27dev: Add pinctrl for cspi chip-select, sdhci2 card-detect, gpio-leds and gpio-keys   Gwenhael Goavec-Merou
• [PATCH 1/3] ARM: imx27: add pwm pingrp   Gwenhael Goavec-Merou
• [PATCH 2/3] ARM: dts: apf27dev: Add pwm support   Gwenhael Goavec-Merou
• [PATCHv3 3/3] ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys   Gwenhael Goavec-Merou
• [linux-sunxi] [PATCH 0/2] ARM: sunxi: Fix interrupt trigger types in the DT   Hans de Goede
• [linux-sunxi] Re: [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware   Hans de Goede
• [linux-sunxi] Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Hans de Goede
• [linux-sunxi] Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Hans de Goede
• regulator-core has_full_constraints set too late for dt using boards ?   Hans de Goede
• regulator-core has_full_constraints set too late for dt using boards ?   Hans de Goede
• regulator-core has_full_constraints set too late for dt using boards ?   Hans de Goede
• regulator-core has_full_constraints set too late for dt using boards ?   Hans de Goede
• [PATCH v2] regulator_get_optional: don't print an error when no regulator is found   Hans de Goede
• [PATCH 0/5] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs   Hans de Goede
• [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH 2/5] ARM: dts: sun4i: Add support for mmc   Hans de Goede
• [PATCH 3/5] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board   Hans de Goede
• [PATCH 4/5] ARM: dts: sun5i: add mmc support   Hans de Goede
• [PATCH 5/5] ARM: dts: sun7i: Add support for mmc   Hans de Goede
• [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [linux-sunxi] Re: [PATCH 2/5] ARM: dts: sun4i: Add support for mmc   Hans de Goede
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [PATCH v3] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board   Hans de Goede
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Hans de Goede
• [linux-sunxi] Re: [PATCH 2/5] ARM: dts: sun4i: Add support for mmc   Hans de Goede
• [linux-sunxi] Re: [PATCH 2/5] ARM: dts: sun4i: Add support for mmc   Hans de Goede
• [PATCH v3] ARM: sunxi: fix sun5i-a13 port F multiplexing   Hans de Goede
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   Hans de Goede
• [PATCH v3] regulator_get_optional: don't print an error when no regulator is found   Hans de Goede
• [PATCH 0/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's   Hans de Goede
• [PATCH 1/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp controller   Hans de Goede
• [PATCH 2/5] input: sun4i-ts: Add support for temperature sensor   Hans de Goede
• [PATCH 3/5] ARM: dts: sun4i: Add rtp controller node   Hans de Goede
• [PATCH 4/5] ARM: dts: sun5i: Add rtp controller node   Hans de Goede
• [PATCH 5/5] ARM: dts: sun7i: Add rtp controller node   Hans de Goede
• [linux-sunxi] Re: [lm-sensors] [PATCH 2/5] input: sun4i-ts: Add support for temperature sensor   Hans de Goede
• Linux ARM hackfest Brno Thursday February 6th   Hans de Goede
• [PATCH 1/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp controller   Hans de Goede
• [PATCH v2 0/5] input: Add new sun4i-ts driver for Allwinner sunxi   Hans de Goede
• [PATCH v2 1/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp controller   Hans de Goede
• [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Hans de Goede
• [PATCH v2 3/5] ARM: dts: sun4i: Add rtp controller node   Hans de Goede
• [PATCH v2 4/5] ARM: dts: sun5i: Add rtp controller node   Hans de Goede
• [PATCH v2 5/5] ARM: dts: sun7i: Add rtp controller node   Hans de Goede
• [lm-sensors] [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Hans de Goede
• [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Hans de Goede
• [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Hans de Goede
• [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Hans de Goede
• [PATCH v3 0/5] input: Add new sun4i-ts driver for Allwinner sunxi   Hans de Goede
• [PATCH v3 1/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp controller   Hans de Goede
• [PATCH v3 2/5] input: sun4i-ts: Add support for temperature sensor   Hans de Goede
• [PATCH v3 3/5] ARM: dts: sun4i: Add rtp controller node   Hans de Goede
• [PATCH v3 4/5] ARM: dts: sun5i: Add rtp controller node   Hans de Goede
• [PATCH v3 5/5] ARM: dts: sun7i: Add rtp controller node   Hans de Goede
• [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support   Robin Gong
• [PATCH 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support   Robin Gong
• [PATCH] mm, show_mem: Remove SHOW_MEM_FILTER_PAGE_COUNT   Mel Gorman
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Alexander Graf
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Alexander Graf
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Alexander Graf
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Alexander Graf
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Alexander Graf
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Alexander Graf
• [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency   Alexander Graf
• [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency   Alexander Graf
• [PATCH] Slightly outdated CONFIG_SMP documentation fix   Robert Graffham
• [PATCH] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Julien Grall
• [Xen-devel] [PATCH] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Julien Grall
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Julien Grall
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Julien Grall
• [RFC part1 PATCH 7/7] ARM64 / ACPI: Enable ARM64 in Kconfig   Graeme Gregory
• [Linaro-acpi] [PATCH v3 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   Graeme Gregory
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Graeme Gregory
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Graeme Gregory
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Igor Grinberg
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Igor Grinberg
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Igor Grinberg
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Igor Grinberg
• [PATCH] [media] s5p-mfc: Add Horizontal and Vertical search range for Video Macro Blocks   Amit Grover
• [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Michael Grzeschik
• [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code   Michael Grzeschik
• [PATCH] ARM: i.MX28: dts: rename usbphy pin names   Michael Grzeschik
• [PATCH 2/4 V2] ARM: mx28: Add USB PHY overcurrent pinmux   Michael Grzeschik
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Simon Guinot
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Simon Guinot
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Simon Guinot
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Simon Guinot
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Vincent Guittot
• [PATCH 5/6] arm64: topology: Tell the scheduler about the relative power of cores   Vincent Guittot
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Jason Gunthorpe
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Jason Gunthorpe
• [PATCH 5/5] arm64: Add LOAD_OFFSET symbol for linker scripts   Jason Gunthorpe
• [PATCH v2] net: mvmdio: fix interrupt timeout handling   Jason Gunthorpe
• [RFC PATCH 2/3] arm64: dts: APM X-Gene PCIe device tree nodes   Jason Gunthorpe
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Hanjun Guo
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Hanjun Guo
• [RFC part1 PATCH 0/7] Make ACPI core running on ARM64   Hanjun Guo
• [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Hanjun Guo
• [RFC part1 PATCH 2/7] ARM64 : Add dummy asm/cpu.h   Hanjun Guo
• [RFC part1 PATCH 3/7] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [RFC part1 PATCH 4/7] ARM64 / ACPI: Introduce the skeleton of _PDC related for ARM64   Hanjun Guo
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Hanjun Guo
• [RFC part1 PATCH 6/7] ARM64 / ACPI: Introduce lowlevel suspend function   Hanjun Guo
• [RFC part1 PATCH 7/7] ARM64 / ACPI: Enable ARM64 in Kconfig   Hanjun Guo
• [RFC part2 PATCH 0/9] Using ACPI MADT table to initialise SMP and GIC   Hanjun Guo
• [RFC part2 PATCH 1/9] ARM64 / ACPI: Implement core functions for parsing MADT table   Hanjun Guo
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Hanjun Guo
• [RFC part2 PATCH 3/9] ARM64 / ACPI: Introduce map_gic_id() to get apic id from MADT or _MAT method   Hanjun Guo
• [RFC part2 PATCH 4/9] ARM64 / ACPI: Use Parked Address in GIC structure for spin table SMP initialisation   Hanjun Guo
• [RFC part2 PATCH 5/9] ACPI: Define ACPI_IRQ_MODEL_GIC needed for arm   Hanjun Guo
• [RFC part2 PATCH 6/9] Irqchip / gic: Set as default domain so we can access from ACPI   Hanjun Guo
• [RFC part2 PATCH 7/9] irqdomain: Add a new API irq_create_acpi_mapping()   Hanjun Guo
• [RFC part2 PATCH 8/9] ACPI / ARM64: Update acpi_register_gsi to register with the core IRQ subsystem   Hanjun Guo
• [RFC part2 PATCH 9/9] ACPI / GIC: Initialize GIC using the information in MADT   Hanjun Guo
• [RFC part3 PATCH 0/2] Using ACPI GTDT table to initialize arch timer   Hanjun Guo
• [RFC part3 PATCH 1/2] clocksource / arch_timer: Use ACPI GTDT table to initialize arch timer   Hanjun Guo
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Hanjun Guo
• [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Hanjun Guo
• [RFC part1 PATCH 3/7] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Hanjun Guo
• [RFC part1 PATCH 3/7] ACPI / processor_core: Rework _PDC related stuff to make it more arch-independent   Hanjun Guo
• [RFC part1 PATCH 4/7] ARM64 / ACPI: Introduce the skeleton of _PDC related for ARM64   Hanjun Guo
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Hanjun Guo
• [RFC part3 PATCH 1/2] clocksource / arch_timer: Use ACPI GTDT table to initialize arch timer   Hanjun Guo
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Hanjun Guo
• [RFC part1 PATCH 4/7] ARM64 / ACPI: Introduce the skeleton of _PDC related for ARM64   Hanjun Guo
• [RFC part2 PATCH 9/9] ACPI / GIC: Initialize GIC using the information in MADT   Hanjun Guo
• [RFC part1 PATCH 2/7] ARM64 : Add dummy asm/cpu.h   Hanjun Guo
• [RFC part2 PATCH 9/9] ACPI / GIC: Initialize GIC using the information in MADT   Hanjun Guo
• [RFC part2 PATCH 7/9] irqdomain: Add a new API irq_create_acpi_mapping()   Hanjun Guo
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Hanjun Guo
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Hanjun Guo
• [RFC part1 PATCH 7/7] ARM64 / ACPI: Enable ARM64 in Kconfig   Hanjun Guo
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Hanjun Guo
• [RFC part3 PATCH 1/2] clocksource / arch_timer: Use ACPI GTDT table to initialize arch timer   Hanjun Guo
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Hanjun Guo
• [RFC part2 PATCH 9/9] ACPI / GIC: Initialize GIC using the information in MADT   Hanjun Guo
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Hanjun Guo
• [RFC part3 PATCH 1/2] clocksource / arch_timer: Use ACPI GTDT table to initialize arch timer   Hanjun Guo
• [RFC part2 PATCH 8/9] ACPI / ARM64: Update acpi_register_gsi to register with the core IRQ subsystem   Hanjun Guo
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Hanjun Guo
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Hanjun Guo
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Hanjun Guo
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Hanjun Guo
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Hanjun Guo
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Hanjun Guo
• [Linaro-acpi] [PATCH v3 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   Hanjun Guo
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Hanjun Guo
• [RFC part2 PATCH 4/9] ARM64 / ACPI: Use Parked Address in GIC structure for spin table SMP initialisation   Hanjun Guo
• [PATCH 1/6] arm64: Add asm/cpu.h   Hanjun Guo
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Hanjun Guo
• [PATCH 1/3] arm64: topology: Implement basic CPU topology support   Hanjun Guo
• [PATCH 1/6] arm64: Add asm/cpu.h   Hanjun Guo
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Hanjun Guo
• [PATCH 2/2] ARM: dts: imx6q-udoo: Add USB host support   Shawn Guo
• [PATCH V3 1/3] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Shawn Guo
• [PATCH v3 RESEND] ARM: imx: pllv1: Fix PLL calculation for i.MX27   Shawn Guo
• [PATCH 4/4] ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions   Shawn Guo
• [PATCH 4/4] ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions   Shawn Guo
• [PATCH] ARM: dts: i.MX51: Move include "imx51-pinfunc.h" into "imx51-pingrp.h"   Shawn Guo
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Shawn Guo
• [PATCH 1/2] ARM: imx28: add apf28 specific initialization (macaddr)   Shawn Guo
• [PATCH 2/2] ARM: apf28dev: dts: set gpio polarity for usb regulator and pinctrl for regulator gpio   Shawn Guo
• [PATCH 1/3] ARM: imx27: add pwm0 pingrp   Shawn Guo
• [PATCH v3 RESEND] ARM: imx: pllv1: Fix PLL calculation for i.MX27   Shawn Guo
• [PATCH 1/2] ARM: imx28: add apf28 specific initialization (macaddr)   Shawn Guo
• [PATCH 2/3] ARM: dts: apf27dev: Add pwm0 support   Shawn Guo
• [PATCH 3/3] ARM: dts: imx27-apf27dev: Add pinctrl for cspi chip-select, sdhci2 card-detect, gpio-leds and gpio-keys   Shawn Guo
• [PATCH 2/5] ARM: mxs: crypto: Remove the old DCP driver   Shawn Guo
• [PATCH V2 3/5] ARM: mxs: crypto: Add Freescale MXS DCP driver   Shawn Guo
• [PATCH 1/3] drm: Add LCD display clock polarity flags   Shawn Guo
• [PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Shawn Guo
• [PATCH 1/3] ARM: imx27: add pwm pingrp   Shawn Guo
• [PATCH 2/3] ARM: dts: apf27dev: Add pwm support   Shawn Guo
• [PATCHv3 3/3] ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys   Shawn Guo
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Shawn Guo
• [PATCH] ARM: dts: imx53: Enable AHCI SATA for imx53-qsb   Shawn Guo
• [PATCH 3/3] Add support for the eukrea-cpuimx28.   Shawn Guo
• [PATCH 1/3] ARM: dts: mxs: Add 18bit pin config for lcdif.   Shawn Guo
• [PATCH 3/3] Add support for the eukrea-cpuimx28.   Shawn Guo
• [PATCHv13] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.   Shawn Guo
• [PATCH] ARM: i.MX28: dts: rename usbphy pin names   Shawn Guo
• [PATCH] ARM: dts: mxs: add #io-channel-cells to mx28 lradc   Shawn Guo
• [PATCH] ARM: dts: mxs: Add iio-hwmon to crystalfontz boards   Shawn Guo
• [PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Shawn Guo
• [PATCH] ARM: imx: use __initconst for const init definition   Shawn Guo
• [PATCH] ARM: dts: vf610: make pinctrl nodes board specific   Shawn Guo
• [PATCH] ARM: dts: vf610: make pinctrl nodes board specific   Shawn Guo
• [PATCHv8][ 2/5] ARM: dts: mbimxsd25: Add sound support.   Shawn Guo
• imx6 suspend/resume issue   Shawn Guo
• [PATCH V6 3/3] ahci: imx: Add i.MX53 support   Shawn Guo
• [PATCH] ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition   Shawn Guo
• [PATCH] MAINTAINERS: merge IMX6 entry into IMX   Shawn Guo
• [PATCH v2] ARM: dts: vf610: make pinctrl nodes board specific   Shawn Guo
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Shawn Guo
• [PATCH 2/6] mmc: sdhci-esdhc-imx: fix incorrect max_discard_to for uSDHC   Shawn Guo
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Shawn Guo
• [PATCH 4/6] mmc: sdhci-esdhc-imx: set the correct max timeout value for uSDHC   Shawn Guo
• [PATCH 5/6] mmc: sdhci: calculate max_discard_to dynamically for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK   Shawn Guo
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Shawn Guo
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Shawn Guo
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Shawn Guo
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Shawn Guo
• [PATCH 5/6] mmc: sdhci: calculate max_discard_to dynamically for SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK   Shawn Guo
• [PATCH 1/6] mmc: sdhci: add platfrom get_max_timeout hook   Shawn Guo
• [PATCH 3/6] mmc: sdhci: add platform set_timeout hook   Shawn Guo
• [PATCH] MAINTAINERS: merge IMX6 entry into IMX   Shawn Guo
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Shawn Guo
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Shawn Guo
• [PATCH 1/2] ASoC: sgtl5000: read chip revision for once   Shawn Guo
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Shawn Guo
• [PATCH 7/7] ARM: dts: imx6q-sabrelite: Enable PCI express   Shawn Guo
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Shawn Guo
• [PATCH 2/4] ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode   Shawn Guo
• [PATCH 4/4] ARM: dts: imx6qdl: add support for Ka-Ro TX6 modules   Shawn Guo
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Shawn Guo
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Shawn Guo
• [PATCH v2] ARM: dts: vf610: make pinctrl nodes board specific   Shawn Guo
• [PATCH v2] ARM: dts: vf610: make pinctrl nodes board specific   Shawn Guo
• [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings   Shawn Guo
• [PATCH V1 03/11] ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio   Shawn Guo
• [PATCH V1 04/11] ARM: dts: imx6qdl-sabrelite: add comments for pinctrl_hog   Shawn Guo
• [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Shawn Guo
• [PATCH] ARM: imx6: Derive spdif clock from pll3_pfd3_454m   Shawn Guo
• [PATCH 0/2] Add missing audio-related clocks to imx6 clock tree   Shawn Guo
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Shawn Guo
• [PATCH 1/4] ARM: imx: update i.MX6Q dts setting of VDDARM_CAP voltage   Shawn Guo
• [PATCH 3/4] ARM: imx: add VDDSOC/PU setpoint info into dts   Shawn Guo
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Shawn Guo
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Shawn Guo
• [PATCH] thermal: imx_thermal: add module device table   Shawn Guo
• [PATCH] ARM: dts: imx6qdl: add spdif support for sabreauto   Shawn Guo
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Shawn Guo
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Shawn Guo
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Shawn Guo
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Shawn Guo
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Shawn Guo
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Shawn Guo
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Shawn Guo
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Shawn Guo
• [PATCH V2 08/13] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Shawn Guo
• [PATCH V2 13/13] ARM: dts: imx: add nitrogen6x board   Shawn Guo
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Shawn Guo
• [PATCH 1/3]: Support cpu frequency scaling and power management for iMX6SL   Shawn Guo
• [PATCH 2/3]: Support cpu frequency scaling and power management for iMX6SL   Shawn Guo
• [PATCH 3/3]: Support cpu frequency scaling and power management for iMX6SL   Shawn Guo
• [PATCH v2 0/5] mmc: sdhci: a few fixes on timeout and max_discard_to   Shawn Guo
• [PATCH 1/3]: Support cpu frequency scaling and power management for iMX6SL   Shawn Guo
• imx6 power consumption   Shawn Guo
• [PATCH 1/2] ARM: imx: initial SolidRun HummingBoard support   Shawn Guo
• [PATCH 2/2] ARM: imx: update imx_v6_v7_defconfig   Shawn Guo
• [PATCH V2 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Shawn Guo
• [PATCH V2 2/2] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Shawn Guo
• [PATCH 1/4] iMX6SL frequency table   Shawn Guo
• [PATCH 2/4] Moving of_init_opp_table   Shawn Guo
• [PATCH 3/4] Removing imx6q_opp_init   Shawn Guo
• [PATCH V2 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Shawn Guo
• imx6 power consumption   Shawn Guo
• [PATCH v3 9/9] ARM: DTS: imx5* imx6*, use imx51-ssi   Shawn Guo
• [PATCH V3 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Shawn Guo
• [PATCH V3 2/2] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Shawn Guo
• [PATCH 1/2] ARM: dts: mxs: Add iio-hwmon to mx28 soc   Shawn Guo
• [PATCH V3 1/1] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Shawn Guo
• [PATCH 1/4] ARM: imx: update i.MX6Q dts setting of VDDARM_CAP voltage   Shawn Guo
• [PATCH V4 2/3] ARM: imx: add vddsoc/pu setpoint info into dts   Shawn Guo
• [PATCH] ARM: imx: enable cpufreq for i.mx6dl   Shawn Guo
• [PATCH V1 1/7] ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ   Shawn Guo
• [PATCH 1/4] ARM: dts: imx6sl: Adding cpu frequency table   Shawn Guo
• [PATCH 2/4] ARM: imx: Add cpu frequency scaling support   Shawn Guo
• [PATCH 4/4] PM / OPP: export symbol find_device_opp   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabresd: Add power key support   Shawn Guo
• [PATCH V2 1/7] PCI: imx6: Make reset-gpio optional   Shawn Guo
• [PATCH 1/2] ARM i.MX35: Add devicetree support.   Shawn Guo
• [PATCH 2/2] ARM: dts: Add support for the i.MX35.   Shawn Guo
• [PATCH 3/3] thermal: imx: add clk info for thermal sensor   Shawn Guo
• [PATCH 2/3] thermal: imx: add necessary clk operation   Shawn Guo
• [PATCH 1/3] ARM: dts: imx6qdl: add necessary thermal clk   Shawn Guo
• [PATCH 2/3] thermal: imx: add necessary clk operation   Shawn Guo
• [PATCH 2/2] ARM: dts: Add support for the i.MX35.   Shawn Guo
• [PATCH V2 2/2] thermal: imx: add necessary clk operation   Shawn Guo
• [PATCH V1 1/7] ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ   Shawn Guo
• i.MX35 devicetree support   Shawn Guo
• [PATCH v2 1/3] ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table.   Shawn Guo
• [PATCH v2 2/3] ARM: imx: Add cpu frequency scaling support   Shawn Guo
• [PATCH v2 3/3] cpufreq: imx6q: add of_init_opp_table   Shawn Guo
• [PATCH v2 3/3] cpufreq: imx6q: add of_init_opp_table   Shawn Guo
• [PATCH] cpufreq: imx6q-cpufreq driver is reused on i.MX6 series SoCs   Shawn Guo
• [PATCH V2] ARM: dts: imx6qdl-sabresd: Add power key support   Shawn Guo
• [PATCH] ARM: dts: imx6qdl: Use 'vddarm' as the regulator name   Shawn Guo
• [PATCH V2] ARM: dts: imx6qdl-sabresd: Add power key support   Shawn Guo
• [PATCH v3 1/2] ARM: imx6sl: Add cpu frequency scaling support   Shawn Guo
• [PATCH v3 2/2] cpufreq: imx6q: add of_init_opp_table   Shawn Guo
• [PATCH v3] cpufreq: imx6q: add of_init_opp_table   Shawn Guo
• [PATCH] ARM: dts: imx6q-sabrelite: PHY reset is active-low   Shawn Guo
• [PATCH V2 5/7] ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.   Shawn Guo
• [PATCH 1/6] ARM: dts: imx27-phytec-phycore-som: Add NFC pin group   Shawn Guo
• [PATCH] ARM: i.MX: Remove IMX_HAVE_PLATFORM_IMX_FB symbol   Shawn Guo
• [PATCH] video: imxfb: Use regulator API with LCD class for powering   Shawn Guo
• [PATCH] video: imxfb: Use regulator API with LCD class for powering   Shawn Guo
• [PATCH V4] thermal: imx: add necessary clk operation   Shawn Guo
• [PATCH 1/1] mmc: sdhci: fix lockdep error on tunning routine   Shawn Guo
• [PATCH 1/2] mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context   Shawn Guo
• [PATCH 2/2] mmc: sdhci-esdhc-imx: fix warning during module remove function   Shawn Guo
• [PATCH v7 06/14] usb: phy-mxs: Add anatop regmap   Shawn Guo
• [PATCH v7 06/14] usb: phy-mxs: Add anatop regmap   Shawn Guo
• [PATCH v7 10/14] usb: phy-mxs: add controller id   Shawn Guo
• [PATCH v7 10/14] usb: phy-mxs: add controller id   Shawn Guo
• [PATCH v7 10/14] usb: phy-mxs: add controller id   Shawn Guo
• [PATCH 2/2] mmc: sdhci-esdhc-imx: fix warning during module remove function   Shawn Guo
• [PATCH 2/2] mmc: sdhci-esdhc-imx: fix warning during module remove function   Shawn Guo
• [PATCH] ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support   Shawn Guo
• [PATCH v2 1/2] ARM: dts: imx6qdl-sabresd: Add PFUZE100 support   Shawn Guo
• [PATCH] ARM: dts: imx6qdl: Pass "fsl,imx6q-mmdc" to MMDC1 port   Shawn Guo
• [PATCH] ARM: imx: improve the comment of CCM lpm SW workaround   Shawn Guo
• [PATCH] ARM: imx: add necessary interface for pfd   Shawn Guo
• [PATCH] ARM: imx: improve status check of clock gate   Shawn Guo
• [PATCH V2] ARM: imx: improve the comment of CCM lpm SW workaround   Shawn Guo
• [PATCHv4 2/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Shawn Guo
• [PATCH V2 1/2] mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context   Shawn Guo
• [GIT PULL 1/2] ARM: imx: soc changes for 3.14   Shawn Guo
• [GIT PULL 2/2] ARM: imx: device tree changes for 3.14   Shawn Guo
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Gupta, Pekon
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Gupta, Pekon
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Gupta, Pekon
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Gupta, Pekon
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Gupta, Pekon
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Gupta, Pekon
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Gupta, Pekon
• [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Anatolij Gustschin
• i.MX6/PCIe and MSI interrupts   Harro Haan
• [PATCH] pci: designware: fix missing msi irqs   Harro Haan
• i.MX6/PCIe and MSI interrupts   Harro Haan
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Harro Haan
• [PATCH 1/2] ARM: Kirkwood: Add 6192 DTSI file   Maxime Hadjinlian
• [PATCH 2/2] ARM: Kirkwood: DT board setup for LaPlug   Maxime Hadjinlian
• [PATCH 2/2] ARM: Kirkwood: DT board setup for LaPlug   Maxime Hadjinlian
• [PATCH] ARM: Kirkwood: DT board setup for LaPlug   Maxime Hadjinlian
• [PATCH 1/2] ARM: Kirkwood: Add 6192 DTSI file   Maxime Hadjinlian
• [PATCH 2/2] ARM: Kirkwood: DT board setup for LaPlug   Maxime Hadjinlian
• [PATCH v3 1/2] ARM: Kirkwood: Add 6192 DTSI file   Maxime Hadjinlian
• [PATCH v3 2/2] ARM: Kirkwood: DT board setup for LaPlug   Maxime Hadjinlian
• [PATCH 06/11] PM / devfreq: move definitions for exynos4_bus into drivers/devfreq   MyungJoo Ham
• [PATCH 11/11] PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>   MyungJoo Ham
• [PATCH 06/11] PM / devfreq: move definitions for exynos4_bus into drivers/devfreq   MyungJoo Ham
• [PATCH] arm64: dts: Add a virtio disk to the RTSM motherboard   Mark Hambleton
• [PATCH] ARM: topology: Staticise non-exported symbols   Jingoo Han
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Jingoo Han
• [PATCH 06/12] pcie: designware: Move register definition to the header file   Jingoo Han
• [PATCH 08/12] pcie: designware: Fix IO transfers   Jingoo Han
• [PATCH 01/12] SPEAr13xx: Correct dt field name for stmmac phy-addr   Jingoo Han
• [PATCH 07/12] pcie: designware: add dw_pcie prefix before cfg_read/write   Jingoo Han
• [PATCH 07/12] pcie: designware: add dw_pcie prefix before cfg_read/write   Jingoo Han
• [PATCH 08/12] pcie: designware: Fix IO transfers   Jingoo Han
• [PATCH 11/12] MAINTAINERS: Add ST SPEAr13xx PCIe driver maintainer   Jingoo Han
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Jingoo Han
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Jingoo Han
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Jingoo Han
• [PATCH 09/12] pcie: SPEAr13xx: Add designware pcie support   Jingoo Han
• [PATCH] pci: designware: fix missing msi irqs   Jingoo Han
• Memory mapping of config space of pcie devices   Jingoo Han
• [PATCH V2 1/7] PCI: imx6: Make reset-gpio optional   Jingoo Han
• [PATCH V2 3/7] PCI: imx6: Split away the PHY reset   Jingoo Han
• [PATCH -next] spi: spi-s3c24xx: remove redundant return value check of platform_get_resource()   Jingoo Han
• [PATCH -next] spi: nuc900: remove redundant return value check of platform_get_resource()   Jingoo Han
• [PATCH] pci: designware: fix missing msi irqs   Jingoo Han
• [PATCH 23/25] thermal: exynos: fix error return code   Jingoo Han
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Ulf Hansson
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Ulf Hansson
• [PATCH 0/6] amba: Drop legacy PM support and some other PM improvements   Ulf Hansson
• [PATCH 1/6] ALSA: AACI: Convert to modern PM ops   Ulf Hansson
• [PATCH 2/6] serial: pl010: Convert to modern PM ops   Ulf Hansson
• [PATCH 3/6] serial: pl011: Convert to modern PM ops   Ulf Hansson
• [PATCH 4/6] amba: Drop legacy PM support and use the pm_generic functions   Ulf Hansson
• [PATCH 5/6] amba: Convert to clk_prepare_enable and clk_disable_unprepare   Ulf Hansson
• [PATCH 6/6] amba: Add clk_prepare|unprepare in runtime PM callbacks   Ulf Hansson
• [PATCH 5/6] amba: Convert to clk_prepare_enable and clk_disable_unprepare   Ulf Hansson
• [PATCH V2 5/6] amba: Convert to clk_prepare_enable and clk_disable_unprepare   Ulf Hansson
• [PATCH 1/5] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks   Ulf Hansson
• [PATCH 1/6] mmc: Do not call get_cd for non removable cards   Ulf Hansson
• [PATCH V2 0/3] PM: Enable option of re-use runtime PM callbacks at system suspend   Ulf Hansson
• [PATCH V2 1/3] PM / Runtime: Add second macro for definition of runtime PM callbacks   Ulf Hansson
• [PATCH V2 2/3] PM / Runtime: Implement the pm_generic_runtime functions for CONFIG_PM   Ulf Hansson
• [PATCH V2 3/3] PM / Sleep: Add macro to define common late/early system PM callbacks   Ulf Hansson
• [PATCH 0/3] ARM: ux500: Fixup signal voltage regulator for SD card   Ulf Hansson
• [PATCH 1/3] ARM: ux500: Refactor common DT configs for sdi[n] devices   Ulf Hansson
• [PATCH 2/3] ARM: ux500: Configure regulator for I/O voltage for SD-card slot   Ulf Hansson
• [PATCH 3/3] ARM: ux500: regulators: Remove dead code for SD-card regulator   Ulf Hansson
• [PATCH V2 3/3] ARM: ux500: regulators: Remove dead code for SD-card regulator   Ulf Hansson
• [PATCH] ARM: ux500: Enable system suspend with WFI support   Ulf Hansson
• [PATCH 22/41] clk: ux500: Copy u8500_clk_init() ready for DT enablement   Ulf Hansson
• [PATCH Resend 6/7] clk: ux500: Remove extra semicolon   Ulf Hansson
• [PATCH V2 0/3] PM: Enable option of re-use runtime PM callbacks at system suspend   Ulf Hansson
• [GIT PULL] clk: ux500 updates for 3.14, take 1   Ulf Hansson
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Ryan Harkin
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Tim Harvey
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Tim Harvey
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Tim Harvey
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Tim Harvey
• [PATCH v3 RESEND] ARM: imx: pllv1: Fix PLL calculation for i.MX27   Sascha Hauer
• mmc: mxs: Use mmc_of_parse   Sascha Hauer
• [PATCH 1/6] mmc: Do not call get_cd for non removable cards   Sascha Hauer
• [PATCH 2/6] mmc: mxs: use standard flag for non-removable status   Sascha Hauer
• [PATCH 3/6] mmc: mxs: use standard flag for broken card detection   Sascha Hauer
• [PATCH 4/6] mmc: mxs: use standard flag for cd inverted   Sascha Hauer
• [PATCH 5/6] mmc: mxs: use mmc_gpio_get_ro for detecting read-only status   Sascha Hauer
• [PATCH 6/6] mmc: mxs: use mmc_of_parse to parse devicetree properties   Sascha Hauer
• [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.   Sascha Hauer
• [PATCHv13][ 3/4] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.   Sascha Hauer
• [PATCHv13][ 1/4] video: imxfb: Introduce regulator support.   Sascha Hauer
• [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.   Sascha Hauer
• [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.   Sascha Hauer
• [PATCH v2] serial: rewrite pxa2xx-uart to use 8250_core   Sascha Hauer
• [PATCH V6 3/3] ahci: imx: Add i.MX53 support   Sascha Hauer
• [PATCH] MAINTAINERS: merge IMX6 entry into IMX   Sascha Hauer
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Sascha Hauer
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Sascha Hauer
• i.MX35 devicetree support   Sascha Hauer
• [PATCH 1/2] ARM i.MX35: Add devicetree support.   Sascha Hauer
• [PATCH 2/2] ARM: dts: Add support for the i.MX35.   Sascha Hauer
• [PATCH 2/2] ARM: dts: Add support for the i.MX35.   Sascha Hauer
• [GIT PULL] get rid of <mach/timex.h>   Sascha Hauer
• v3.13-rc6+ regression (ARM board)   Krzysztof Hałasa
• [ARM] Fix kernel compile error: drivers/crypto/ixp4xx_crypto.c.   Krzysztof Hałasa
• Regression (ARM) arch/arm/mm/init.c doesn't build without CONFIG_ARM_PATCH_PHYS_VIRT.   Krzysztof Hałasa
• [PATCH 1/9] PCI: Use dev_is_pci() to check whether it is pci device   Bjorn Helgaas
• [PATCH 1/9] PCI: Use dev_is_pci() to check whether it is pci device   Bjorn Helgaas
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Bjorn Helgaas
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Bjorn Helgaas
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Bjorn Helgaas
• [PATCH v2] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Bjorn Helgaas
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Bjorn Helgaas
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Bjorn Helgaas
• Memory mapping of config space of pcie devices   Bjorn Helgaas
• [PATCH V2 1/7] PCI: imx6: Make reset-gpio optional   Bjorn Helgaas
• [PATCH V2 1/7] PCI: imx6: Make reset-gpio optional   Bjorn Helgaas
• [PATCH] pci: designware: fix missing msi irqs   Bjorn Helgaas
• [PATCH 07/12] pcie: designware: add dw_pcie prefix before cfg_read/write   Bjorn Helgaas
• [PATCH 08/12] pcie: designware: Fix IO transfers   Bjorn Helgaas
• [PATCH V3 1/3] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Tejun Heo
• [PATCH V6 2/3] ahci: imx: Pull out the clock enable/disable calls   Tejun Heo
• [PATCH v2 00/23] mm: Use memblock interface instead of bootmem   Tejun Heo
• [PATCH v2 02/23] mm/memblock: debug: don't free reserved array if !ARCH_DISCARD_MEMBLOCK   Tejun Heo
• [PATCH v2 03/23] mm/bootmem: remove duplicated declaration of __free_pages_bootmem()   Tejun Heo
• [PATCH v2 04/23] mm/memory_hotplug: remove unnecessary inclusion of bootmem.h   Tejun Heo
• [PATCH v2 06/23] mm/char: remove unnecessary inclusion of bootmem.h   Tejun Heo
• [PATCH v2 07/23] mm/memblock: drop WARN and use SMP_CACHE_BYTES as a default alignment   Tejun Heo
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Tejun Heo
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Tejun Heo
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Tejun Heo
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Tejun Heo
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Tejun Heo
• [PATCH v3 05/23] mm/memblock: drop WARN and use SMP_CACHE_BYTES as a default alignment   Tejun Heo
• [PATCH v3 06/23] mm/memblock: reorder parameters of memblock_find_in_range_node   Tejun Heo
• [PATCH v3 07/23] mm/memblock: switch to use NUMA_NO_NODE instead of MAX_NUMNODES   Tejun Heo
• [PATCH v3 08/23] mm/memblock: Add memblock memory allocation apis   Tejun Heo
• [PATCH v3 08/23] mm/memblock: Add memblock memory allocation apis   Tejun Heo
• [PATCH 3/4] SATA: MV: Add support for the optional PHYs   Tejun Heo
• [PATCH 3/4] SATA: MV: Add support for the optional PHYs   Tejun Heo
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Tejun Heo
• [PATCH 1/9] PCI: Use dev_is_pci() to check whether it is pci device   Benjamin Herrenschmidt
• [PATCH] OF: base: match each node compatible against all given matches first   Rob Herring
• [RFC][PATCHv6+++ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Rob Herring
• [PATCH] clk: exynos: Fix typos in DT bindings documentation   Rob Herring
• [PATCH 1/2] ARM: dts: doc: Document missing binding for omap5-mpu   Rob Herring
• [PATCH] hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)   Rob Herring
• [RFC part2 PATCH 9/9] ACPI / GIC: Initialize GIC using the information in MADT   Rob Herring
• [RFC part1 PATCH 4/7] ARM64 / ACPI: Introduce the skeleton of _PDC related for ARM64   Rob Herring
• [RFC part2 PATCH 7/9] irqdomain: Add a new API irq_create_acpi_mapping()   Rob Herring
• [PATCH] ARM: highbank: add soft power and reset key event handling   Rob Herring
• [PATCH 3/4] ARM: mvebu: NETGEAR ReadyNAS 104 .dts file cleanup   Rob Herring
• [RFC part3 PATCH 1/2] clocksource / arch_timer: Use ACPI GTDT table to initialize arch timer   Rob Herring
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Rob Herring
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Rob Herring
• [PATCH v2] ARM: highbank: handle soft poweroff and reset key events   Rob Herring
• [PATCH v2] OF: base: match each node compatible against all given matches first   Rob Herring
• [PATCH 0/2] Enable Calxeda cpufreq driver on arm64   Rob Herring
• [PATCH 1/2] cpufreq: enable ARM drivers on arm64   Rob Herring
• [PATCH 2/2] cpufreq: highbank: rework the kconfig dependencies for arm64   Rob Herring
• [PATCH v2] arm64: enable EDAC on arm64   Rob Herring
• [PATCH v2] arm64: enable EDAC on arm64   Rob Herring
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Rob Herring
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Rob Herring
• [PATCH] ARM: clean-up common multi-platform kconfig options   Rob Herring
• [PATCH 1/2] cpufreq: enable ARM drivers on arm64   Rob Herring
• [PATCH] ARM: clean-up common multi-platform kconfig options   Rob Herring
• [PATCH] ARM: clean-up common multi-platform kconfig options   Rob Herring
• [PATCH] ARM: clean-up common multi-platform kconfig options   Rob Herring
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Rob Herring
• [PATCH] ARM: clean-up common multi-platform kconfig options   Rob Herring
• [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Rob Herring
• [Linaro-acpi] [PATCH v3 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   Rob Herring
• [PATCH] arm64: print cpu frequency in /proc/cpuinfo   Rob Herring
• [PATCH] arm64: print cpu frequency in /proc/cpuinfo   Rob Herring
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Rob Herring
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Rob Herring
• [PATCH] MAINTAINERS: Update Rob Herring's email address   Rob Herring
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Rob Herring
• [PATCH] OF: base: match each node compatible against all given matches first   Sebastian Hesselbarth
• [PATCH v2] OF: base: match each node compatible against all given matches first   Sebastian Hesselbarth
• Spurious timeouts in mvmdio   Sebastian Hesselbarth
• [PATCH v2] OF: base: match each node compatible against all given matches first   Sebastian Hesselbarth
• Spurious timeouts in mvmdio   Sebastian Hesselbarth
• Spurious timeouts in mvmdio   Sebastian Hesselbarth
• [PATCH RFCv2 0/6] net: phy: Ethernet PHY powerdown optimization   Sebastian Hesselbarth
• [PATCH RFCv2 1/6] net: mv643xx_eth: properly start/stop phy device   Sebastian Hesselbarth
• [PATCH RFCv2 2/6] net: phy: marvell: provide genphy suspend/resume   Sebastian Hesselbarth
• [PATCH RFCv2 3/6] net: phy: provide phy_resume/phy_suspend helpers   Sebastian Hesselbarth
• [PATCH RFCv2 4/6] net: phy: resume/suspend PHYs on attach/detach   Sebastian Hesselbarth
• [PATCH RFCv2 5/6] net: phy: suspend unused PHYs on mdio_bus in late_initcall   Sebastian Hesselbarth
• [PATCH RFCv2 6/6] net: phy: suspend phydev when going to HALTED   Sebastian Hesselbarth
• [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH v4 1/9] irqchip: add DesignWare APB ICTL interrupt controller   Sebastian Hesselbarth
• [PATCH v4 2/9] MAINTAINERS: add ARM Marvell Berlin SoC   Sebastian Hesselbarth
• [PATCH v4 3/9] ARM: l2x0: add Marvell Tauros3 support   Sebastian Hesselbarth
• [PATCH v4 4/9] ARM: add Marvell Berlin SoC familiy to Marvell doc   Sebastian Hesselbarth
• [PATCH v4 5/9] ARM: add Marvell Berlin SoCs to multi_v7_defconfig   Sebastian Hesselbarth
• [PATCH v4 6/9] ARM: add Marvell Berlin UART0 lowlevel debug   Sebastian Hesselbarth
• [PATCH v4 7/9] ARM: add Armada 1500 and Sony NSZ-GS7 device tree files   Sebastian Hesselbarth
• [PATCH v4 8/9] ARM: add Armada 1500-mini and Chromecast device tree files   Sebastian Hesselbarth
• [PATCH v4 9/9] ARM: add initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH v1 0/6] net: phy: Ethernet PHY powerdown optimization   Sebastian Hesselbarth
• [PATCH v1 1/6] net: mv643xx_eth: properly start/stop phy device   Sebastian Hesselbarth
• [PATCH v1 2/6] net: phy: marvell: provide genphy suspend/resume   Sebastian Hesselbarth
• [PATCH v1 3/6] net: phy: provide phy_resume/phy_suspend helpers   Sebastian Hesselbarth
• [PATCH v1 4/6] net: phy: resume/suspend PHYs on attach/detach   Sebastian Hesselbarth
• [PATCH v1 5/6] net: phy: suspend unused PHYs on mdio_bus in late_initcall   Sebastian Hesselbarth
• [PATCH v1 6/6] net: phy: suspend phydev when going to HALTED   Sebastian Hesselbarth
• [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH v1 1/6] net: mv643xx_eth: properly start/stop phy device   Sebastian Hesselbarth
• [PATCH v2 0/5] net: phy: Ethernet PHY powerdown optimization   Sebastian Hesselbarth
• [PATCH v2 1/5] net: mv643xx_eth: properly start/stop phy device   Sebastian Hesselbarth
• [PATCH v2 2/5] net: phy: marvell: provide genphy suspend/resume   Sebastian Hesselbarth
• [PATCH v2 3/5] net: phy: provide phy_resume/phy_suspend helpers   Sebastian Hesselbarth
• [PATCH v2 4/5] net: phy: resume/suspend PHYs on attach/detach   Sebastian Hesselbarth
• [PATCH v2 5/5] net: phy: suspend phydev when going to HALTED   Sebastian Hesselbarth
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Sebastian Hesselbarth
• [GIT PULL] ARM: Initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [GIT PULL v2] ARM: Initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [GIT PULL] ARM: Initial support for Marvell Berlin SoCs   Sebastian Hesselbarth
• [PATCH] net: mvmdio: fix interrupt timeout handling   Sebastian Hesselbarth
• Openblocks AX3-4 i2c bus lockup   Sebastian Hesselbarth
• [PATCH v6] ARM: omap: edma: add suspend suspend/resume hooks   Kevin Hilman
• [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Kevin Hilman
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Kevin Hilman
• [GIT PULL][v2] pull request for hisilicon soc   Kevin Hilman
• [GIT PULL] two regression fixes and two more omap dt fixes against v3.13-rc2   Kevin Hilman
• [GIT PULL] ARM: OMAP2+: hwmod code/data: fixes for v3.13-rc   Kevin Hilman
• [GIT PULL] wl1251 platform data changes for v3.14   Kevin Hilman
• [PATCH v5 0/3] Exynos 5410 support   Kevin Hilman
• [GIT PULL] ARM: mvebu: DT changes for v3.14 (set #2)   Kevin Hilman
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Kevin Hilman
• [GIT PULL] at91: dt for 3.14 #1   Kevin Hilman
• [GIT PULL] at91: soc updates for 3.14 #1   Kevin Hilman
• [GIT PULL] two Integrator devicetree patches   Kevin Hilman
• [GIT PULL] two Integrator devicetree patches   Kevin Hilman
• [PATCH] ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration option   Kevin Hilman
• [PATCH v5 0/3] Exynos 5410 support   Kevin Hilman
• [GIT PULL] make omap24xx boot in dt mode only, prepare omap3 to drop legacy booting for v3.14   Kevin Hilman
• [PATCH v12 01/08] ARM: hi3xxx: add board support with device tree   Kevin Hilman
• [PATCH v12 07/08] ARM: dts: enable clock binding on Hi3620   Kevin Hilman
• [PATCH v12 05/08] ARM: hi3xxx: add smp support   Kevin Hilman
• [PATCH v12 06/08] ARM: hi3xxx: add hotplug support   Kevin Hilman
• [PATCH v12 08/08] ARM: hi3xxx: select GPIO in Kconfig   Kevin Hilman
• [GIT PULL v4][for 3.14] pull request for hisilicon soc   Kevin Hilman
• [PATCH v5] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Kevin Hilman
• [GIT PULL] get rid of <mach/timex.h>   Kevin Hilman
• [GIT PULL] Nomadik DT changes for v3.14   Kevin Hilman
• [GIT PULL] ARM: mvebu: DT changes for v3.14 (incr #3)   Kevin Hilman
• [GIT PULL v2] ARM: Initial support for Marvell Berlin SoCs   Kevin Hilman
• [GIT PULL] Support for efm32   Kevin Hilman
• [GIT PULL 1/3] ARM: keystone: device tree updates for 3.14   Kevin Hilman
• [GIT PULL 2/3] ARM: keystone: SOC updates for 3.14   Kevin Hilman
• [GIT PULL 3/3] ARM: MAINTAINERS: SOC updates for 3.14   Kevin Hilman
• [GIT PULL] ARM: mvebu: DT changes for v3.14 (incr. #4)   Kevin Hilman
• [GIT PULL 1/3] ARM: keystone: device tree updates for 3.14   Kevin Hilman
• [GIT PULL] omap display regression fix against v3.13-rc4   Kevin Hilman
• arm-soc: Xilinx Zynq dt changes for v3.14   Kevin Hilman
• [PATCH 1/3] ARM: hisi: rename hi3xxx to hisi   Kevin Hilman
• [GIT PULL v2 00/33] Renesas ARM based SoC updates for v3.14   Kevin Hilman
• [GIT PULL] Renesas USB r8a66597 HCD update for v3.14   Kevin Hilman
• [GIT PULL 0/3] Renesas ARM based SoC fixes for v3.13   Kevin Hilman
• [GIT PULL 00/69] Renesas ARM based SoC DT updates for v3.14   Kevin Hilman
• No subject   Loc Ho
• [PATCH v4 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v4 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v4 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Loc Ho
• [PATCH v6 0/4] ata: Add APM X-Gene SoC SATA host controller support   Loc Ho
• [PATCH v6 1/4] ata: Export required functions by APM X-Gene SATA driver   Loc Ho
• [PATCH v6 2/4] Documentation: Add documentation for APM X-Gene SoC SATA host controller DTS binding   Loc Ho
• [PATCH v6 3/4] ata: Add APM X-Gene SoC SATA host controller driver   Loc Ho
• [PATCH v6 4/4] arm64: Add APM X-Gene SoC SATA host controller DTS entries   Loc Ho
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v4 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v5 0/4] PHY: Add APM X-Gene SoC 15Gbps Multi-purpose PHY support   Loc Ho
• [PATCH v5 1/4] PHY: Add function set_speed to generic PHY framework   Loc Ho
• [PATCH v5 2/4] Documentation: Add APM X-Gene SoC 15Gbps Multi-purpose PHY driver binding documentation   Loc Ho
• [PATCH v5 3/4] PHY: add APM X-Gene SoC 15Gbps Multi-purpose PHY driver   Loc Ho
• [PATCH v5 4/4] arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries   Loc Ho
• [PATCH V2 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Loc Ho
• [PATCH v6 0/4] ata: Add APM X-Gene SoC SATA host controller support   Loc Ho
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   James Hogan
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   James Hogan
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   James Hogan
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   James Hogan
• [PATCH] clk: clk-divider: fix divisor > 255 bug   James Hogan
• [RFC 0/2] clk: dt: generic DT preset clock frequency bindings   James Hogan
• [GIT PULL 00/28] Renesas ARM based SoC updates for v3.14   Simon Horman
• [PATCH 01/28] ARM: shmobile: r8a7778: add I2C clock for DT   Simon Horman
• [PATCH 02/28] ARM: shmobile: r8a7779: add I2C clock for DT   Simon Horman
• [PATCH 03/28] ARM: shmobile: Select IRQC in case of the r8a7791 SoC   Simon Horman
• [PATCH 04/28] ARM: shmobile: r8a7791 PFC platform device support   Simon Horman
• [PATCH 05/28] ARM: shmobile: Select GPIO in case of the r8a7791 SoC   Simon Horman
• [PATCH 06/28] ARM: shmobile: r8a7791 GPIO platform device support   Simon Horman
• [PATCH 07/28] ARM: shmobile: r8a73a4: don't use named irq for DMAEngine   Simon Horman
• [PATCH 08/28] ARM: shmobile: Select GPIO in case of the r7s72100 SoC   Simon Horman
• [PATCH 09/28] ARM: shmobile: r8a7778: add MMCIF clock support for DT   Simon Horman
• [PATCH 10/28] ARM: shmobile: r8a7778: add SDHI clock support for DT   Simon Horman
• [PATCH 11/28] ARM: shmobile: r8a7779: add SDHI clock support for DT   Simon Horman
• [PATCH 12/28] ARM: shmobile: r8a7790: Add USBHS clock support   Simon Horman
• [PATCH 13/28] ARM: shmobile: r8a7790: add QSPI support   Simon Horman
• [PATCH 14/28] ARM: shmobile: Enable MTU2 on r7s72100   Simon Horman
• [PATCH 15/28] ARM: shmobile: Add shared EMEV2 code for ->init_machine()   Simon Horman
• [PATCH 16/28] ARM: shmobile: Use ->init_late() in shared EMEV2 case   Simon Horman
• [PATCH 17/28] ARM: shmobile: Remove legacy KZM9D board code   Simon Horman
• [PATCH 18/28] ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code   Simon Horman
• [PATCH 19/28] ARM: shmobile: r8a7778: add HSPI clock support for DT   Simon Horman
• [PATCH 20/28] ARM: shmobile: Select USE_OF on EMEV2   Simon Horman
• [PATCH 21/28] ARM: shmobile: r8a7791: Add DU and LVDS clocks   Simon Horman
• [PATCH 22/28] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 23/28] ARM: shmobile: Add r8a7790 clocks for thermal devices   Simon Horman
• [PATCH 24/28] ARM: shmobile: Add r8a7791 thermal platform device   Simon Horman
• [PATCH 25/28] ARM: shmobile: Add r8a7791 clocks for thermal devices   Simon Horman
• [PATCH 26/28] ARM: shmobile: r8a7790: care EXTAL divider settings   Simon Horman
• [PATCH 27/28] ARM: shmobile: r8a7790: fixup I2C clock source   Simon Horman
• [PATCH 28/28] ARM: shmobile: r8a7790: tidyup clock table order   Simon Horman
• [PATCH v2 3/3] ARM: shmobile: kzm9d: Use common clock framework   Simon Horman
• [GIT PULL 00/28] Renesas ARM based SoC updates for v3.14   Simon Horman
• [PATCH 00/04] ARM: shmobile: Use SoC suffix for INTC compat string   Simon Horman
• [PATCH 2/2] ARM: shmobile: armadillo: Set vccq_sdhi0 regulator type in DT   Simon Horman
• [PATCH v2] ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile   Simon Horman
• [PATCH 00/04] ARM: shmobile: Use SoC suffix for INTC compat string   Simon Horman
• [PATCH v2 0/3] ARM: shmobile: marzen: enable HSPI0 to DTS   Simon Horman
• [PATCH 2/2] ARM: shmobile: armadillo: Set vccq_sdhi0 regulator type in DT   Simon Horman
• [PATCH 0/2] ARM: shmobile: kzm9g, armadillo800eva: Enable SMSC_PHY in defconfig   Simon Horman
• [PATCH 1/2] ARM: shmobile: kzm9g: Enable SMSC_PHY in defconfig   Simon Horman
• [PATCH 2/2] ARM: shmobile: armadillo800eva: Enable SMSC_PHY in defconfig   Simon Horman
• [PATCH] ARM: rcar-gen2: Do not setup timer in non-secure mode   Simon Horman
• [PATCH] sh_eth: add R8A7791 support   Simon Horman
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Simon Horman
• [PATCH v3 0/3] Add Ether support for R8A7791/Koelsch board   Simon Horman
• [PATCH] ARM: rcar-gen2: Do not setup timer in non-secure mode   Simon Horman
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Simon Horman
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Simon Horman
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Simon Horman
• [GIT PULL] Renesas USB r8a66597 HCD update for v3.14   Simon Horman
• [PATCH] usb: r8a66597-hcd: Convert to clk_prepare/unprepare   Simon Horman
• [GIT PULL v2 00/33] Renesas ARM based SoC updates for v3.14   Simon Horman
• [PATCH 01/33] ARM: shmobile: r8a7778: add I2C clock for DT   Simon Horman
• [PATCH 10/33] ARM: shmobile: r8a7778: add SDHI clock support for DT   Simon Horman
• [PATCH 02/33] ARM: shmobile: r8a7779: add I2C clock for DT   Simon Horman
• [PATCH 11/33] ARM: shmobile: r8a7779: add SDHI clock support for DT   Simon Horman
• [PATCH 03/33] ARM: shmobile: Select IRQC in case of the r8a7791 SoC   Simon Horman
• [PATCH 04/33] ARM: shmobile: r8a7791 PFC platform device support   Simon Horman
• [PATCH 12/33] ARM: shmobile: r8a7790: Add USBHS clock support   Simon Horman
• [PATCH 13/33] ARM: shmobile: r8a7790: add QSPI support   Simon Horman
• [PATCH 05/33] ARM: shmobile: Select GPIO in case of the r8a7791 SoC   Simon Horman
• [PATCH 06/33] ARM: shmobile: r8a7791 GPIO platform device support   Simon Horman
• [PATCH 14/33] ARM: shmobile: Enable MTU2 on r7s72100   Simon Horman
• [PATCH 07/33] ARM: shmobile: r8a73a4: don't use named irq for DMAEngine   Simon Horman
• [PATCH 15/33] ARM: shmobile: Add shared EMEV2 code for ->init_machine()   Simon Horman
• [PATCH 08/33] ARM: shmobile: Select GPIO in case of the r7s72100 SoC   Simon Horman
• [PATCH 16/33] ARM: shmobile: Use ->init_late() in shared EMEV2 case   Simon Horman
• [PATCH 17/33] ARM: shmobile: Remove legacy KZM9D board code   Simon Horman
• [PATCH 09/33] ARM: shmobile: r8a7778: add MMCIF clock support for DT   Simon Horman
• [PATCH 18/33] ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code   Simon Horman
• [PATCH 19/33] ARM: shmobile: r8a7778: add HSPI clock support for DT   Simon Horman
• [PATCH 20/33] ARM: shmobile: Select USE_OF on EMEV2   Simon Horman
• [PATCH 21/33] ARM: shmobile: r8a7791: Add DU and LVDS clocks   Simon Horman
• [PATCH 22/33] ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 23/33] ARM: shmobile: Add r8a7790 clocks for thermal devices   Simon Horman
• [PATCH 24/33] ARM: shmobile: Add r8a7791 thermal platform device   Simon Horman
• [PATCH 25/33] ARM: shmobile: Add r8a7791 clocks for thermal devices   Simon Horman
• [PATCH 26/33] ARM: shmobile: r8a7790: care EXTAL divider settings   Simon Horman
• [PATCH 27/33] ARM: shmobile: r8a7790: fixup I2C clock source   Simon Horman
• [PATCH 28/33] ARM: shmobile: r8a7790: tidyup clock table order   Simon Horman
• [PATCH 29/33] ARM: shmobile: Select AUTO_ZRELADDR for EMEV2   Simon Horman
• [PATCH 30/33] ARM: shmobile: r8a7778: add HPBIFx DMAEngine support   Simon Horman
• [PATCH 31/33] ARM: shmobile: r8a7790: add SSI MSTP clocks   Simon Horman
• [PATCH 32/33] ARM: shmobile: r8a7740: add FSI clock support for DT   Simon Horman
• [PATCH 33/33] ARM: shmobile: r8a7779: add HSPI clock support for DT   Simon Horman
• [GIT PULL 0/3] Renesas ARM based SoC fixes for v3.13   Simon Horman
• [PATCH 1/3] ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB   Simon Horman
• [PATCH 2/3] irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation   Simon Horman
• [PATCH 3/3] ARM: shmobile: r8a7790: Fix GPIO resources in DTS   Simon Horman
• [PATCH 10/69] ARM: shmobile: bockw: remove manual PFC settings on reference   Simon Horman
• [PATCH 11/69] ARM: shmobile: r8a7778: add MMCIF support on DTSI   Simon Horman
• [PATCH 12/69] ARM: shmobile: bockw: add MMCIF support on DTS   Simon Horman
• [PATCH 13/69] ARM: shmobile: bockw: fixup MMC pin conflict on DTS   Simon Horman
• [PATCH 14/69] ARM: shmobile: r8a7778: add SDHI support on DTSI   Simon Horman
• [PATCH 15/69] ARM: shmobile: bockw: add SDHI support on DTS   Simon Horman
• [PATCH 16/69] ARM: shmobile: r8a7779: add SDHI support on DTSI   Simon Horman
• [PATCH 17/69] ARM: shmobile: marzen: add SDHI support on DTS   Simon Horman
• [PATCH 18/69] ARM: shmobile: r8a7740: tidyup DT node naming   Simon Horman
• [PATCH 19/69] ARM: shmobile: r8a73a4: tidyup DT node naming   Simon Horman
• [PATCH 20/69] ARM: shmobile: r8a7778: tidyup DT node naming   Simon Horman
• [PATCH 21/69] ARM: shmobile: r8a7779: tidyup DT node naming   Simon Horman
• [PATCH 22/69] ARM: shmobile: r8a7790: tidyup DT node naming   Simon Horman
• [PATCH 23/69] ARM: shmobile: sh73a0: tidyup DT node naming   Simon Horman
• [PATCH 24/69] ARM: shmobile: armadillo: tidyup DT node naming   Simon Horman
• [PATCH 25/69] ARM: shmobile: ape6evm: tidyup DT node naming   Simon Horman
• [PATCH 26/69] ARM: shmobile: kzm9g: tidyup DT node naming   Simon Horman
• [PATCH 27/69] ARM: shmobile: bockw: tidyup DT node naming   Simon Horman
• [PATCH 28/69] ARM: shmobile: marzen: tidyup DT node naming   Simon Horman
• [PATCH 29/69] ARM: shmobile: lager: tidyup DT node naming   Simon Horman
• [PATCH 30/69] ARM: shmobile: emev2: Add clock tree description in DT   Simon Horman
• [PATCH 31/69] ARM: shmobile: r8a7778: add I2C support on DTSI   Simon Horman
• [PATCH 32/69] ARM: shmobile: r8a7778: add HSPI suppport on DTSI   Simon Horman
• [PATCH 33/69] ARM: shmobile: bockw: enable HSPI0 on DTS   Simon Horman
• [PATCH 34/69] ARM: shmobile: Use #include in device tree sources   Simon Horman
• [PATCH 35/69] ARM: shmobile: Use interrupt macros in SoC DT files   Simon Horman
• [PATCH 36/69] ARM: shmobile: Use interrupt macros in board DT files   Simon Horman
• [PATCH 37/69] ARM: shmobile: marzen-reference: Use falling edge IRQ for LAN9221   Simon Horman
• [PATCH 38/69] ARM: shmobile: bockw-reference: Use falling edge IRQ for LAN9221   Simon Horman
• [GIT PULL 00/69] Renesas ARM based SoC DT updates for v3.14   Simon Horman
• [PATCH 39/69] ARM: shmobile: kzm9g-reference: Use falling edge IRQ for LAN9221   Simon Horman
• [PATCH 40/69] ARM: shmobile: marzen: remove SDHI0 WP pin setting from DTS   Simon Horman
• [PATCH 41/69] ARM: shmobile: marzen: remove SDHI0 WP pin setting   Simon Horman
• [PATCH 42/69] ARM: shmobile: sh73a0: fixup sdhi compatible name   Simon Horman
• [PATCH 43/69] ARM: shmobile: Use r8a7791 suffix for IRQC compat string   Simon Horman
• [PATCH 44/69] ARM: shmobile: Configure r8a7791 PFC on Koelsch via DTS   Simon Horman
• [PATCH 45/69] ARM: shmobile: Add r8a7790 thermal device node to DTS   Simon Horman
• [PATCH 46/69] ARM: shmobile: Add r8a7791 thermal device node to DTS   Simon Horman
• [PATCH 47/69] ARM: shmobile: Use r8a7790 suffix for MMCIF compat string   Simon Horman
• [PATCH 48/69] ARM: shmobile: Use r8a7790 suffix for IRQC compat string   Simon Horman
• [PATCH 49/69] ARM: shmobile: armadillo-reference: Use low level IRQ for ST1231   Simon Horman
• [PATCH 50/69] ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D   Simon Horman
• [PATCH 51/69] ARM: shmobile: Koelsch DT reference GPIO LED support   Simon Horman
• [PATCH 52/69] ARM: shmobile: kzm9g-reference: Add PCF8575 GPIO extender to DT   Simon Horman
• [PATCH 01/69] ARM: shmobile: r8a7778: add I2C support on DTSI   Simon Horman
• [PATCH 53/69] ARM: shmobile: kzm9g-reference: Add GPIO keys to DT   Simon Horman
• [PATCH 02/69] ARM: shmobile: r8a7779: tidyup I2C driver name on DTSI   Simon Horman
• [PATCH 54/69] ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref   Simon Horman
• [PATCH 03/69] ARM: shmobile: lager: add default PFC settings on DTS   Simon Horman
• [PATCH 55/69] ARM: shmobile: Include all 2 GiB of memory on APE6EVM   Simon Horman
• [PATCH 04/69] ARM: shmobile: lager: add MMCIF support on DTS   Simon Horman
• [PATCH 56/69] ARM: shmobile: Include all 4 GiB of memory on Lager   Simon Horman
• [PATCH 05/69] ARM: shmobile: r8a7791 PFC device tree node   Simon Horman
• [PATCH 57/69] ARM: shmobile: Include all 4 GiB of memory on Lager DT Ref   Simon Horman
• [PATCH 58/69] ARM: shmobile: Fix r8a7791 GPIO resources in DTS   Simon Horman
• [PATCH 06/69] ARM: shmobile: r8a7791 GPIO device tree node   Simon Horman
• [PATCH 07/69] ARM: shmobile: r8a7791 Koelsch DT reference DTS bits   Simon Horman
• [PATCH 59/69] ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT files   Simon Horman
• [PATCH 60/69] ARM: shmobile: emev2: Use interrupt macros in DT files   Simon Horman
• [PATCH 08/69] ARM: shmobile: r8a7778: Fix pin control device address in DT   Simon Horman
• [PATCH 09/69] ARM: shmobile: bockw: add default PFC settings on DTS   Simon Horman
• [PATCH 61/69] ARM: shmobile: emev2: Setup internal peripheral interrupts as level high   Simon Horman
• [PATCH 62/69] ARM: shmobile: r8a7740: add FSI support via DTSI   Simon Horman
• [PATCH 63/69] ARM: shmobile: armadillo: add FSI support for DTS   Simon Horman
• [PATCH 64/69] ARM: shmobile: Use sh73a0 suffix for INTC compat string   Simon Horman
• [PATCH 65/69] ARM: shmobile: Use r8a7740 suffix for INTC compat string   Simon Horman
• [PATCH 66/69] ARM: shmobile: Use r8a7778 suffix for INTC compat string   Simon Horman
• [PATCH 67/69] ARM: shmobile: Use r8a7779 suffix for INTC compat string   Simon Horman
• [PATCH 68/69] ARM: shmobile: r8a7779: add HSPI support to DTSI   Simon Horman
• [PATCH 69/69] ARM: shmobile: marzen: enable HSPI0 in DTS   Simon Horman
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sies   Simon Horman
• [PATCH 08/12] mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare   Simon Horman
• [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support   Simon Horman
• [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support   Simon Horman
• [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support   Simon Horman
• [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support   Simon Horman
• [GIT PULL] Renesas ARM based SoC Clocksource updates for v3.14   Simon Horman
• [PATCH] clocksource: sh_cmt: Add clk_prepare/unprepare support   Simon Horman
• [PATCH RFC 0/2] pinctl: sh-pfc: r7s72100: Ethernet support   Simon Horman
• [PATCH RFC 1/2] pinctl: sh-pfc: r7s72100: Ethernet support   Simon Horman
• [PATCH RFC 2/2] ARM: shmobile: r7s72100: Add ethernet PFC node to DT   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Simon Horman
• [PATCH 0/2] ARM: shmobile: koelsch: defconfig updates   Simon Horman
• [PATCH 1/2] ARM: shmobile: koelsch: Enable CONFIG_PACKET in defconfig   Simon Horman
• [PATCH 2/2] ARM: shmobile: koelsch: Do not disable CONFIG_{INOTIFY_USER, UNIX} in defconfig   Simon Horman
• linux-next: manual merge of the renesas tree with the arm-soc tree   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Simon Horman
• [GIT PULL] Renesas ARM based SoC Clocksource updates for v3.14   Simon Horman
• [PATCH RFC 1/2] pinctl: sh-pfc: r7s72100: Ethernet support   Simon Horman
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Simon Horman
• [GIT PULL v2 00/33] Renesas ARM based SoC updates for v3.14   Simon Horman
• [GIT PULL] Renesas ARM based SoC Clocksource updates for v3.14   Simon Horman
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Simon Horman
• [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Simon Horman
• [PATCH 0/2] ARM: shmobile: koelsch: defconfig updates   Simon Horman
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sizes   Simon Horman
• [PATCH] arm: shmobile: clks: remove duplicated clock from r7s72100   Simon Horman
• [PATCH 2/2] ARM: shmobile: Lager: conditionally select CONFIG_MICREL_PHY   Simon Horman
• [GIT PULL] Renesas ARM based SoC Clock updates for v3.14   Simon Horman
• [PATCH] clk: emev2: Add support for emev2 SMU clocks with DT   Simon Horman
• [GIT PULL 00/26] Renesas ARM based SoC board updates for v3.14   Simon Horman
• [PATCH 01/26] ARM: shmobile: bockw: use regulator for MMCIF   Simon Horman
• [PATCH 10/26] ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support   Simon Horman
• [PATCH 02/26] ARM: shmobile: Enable PFC/GPIO on the Koelsch board   Simon Horman
• [PATCH 11/26] ARM: shmobile: r7s72100 Genmai DT reference DTS bits   Simon Horman
• [PATCH 03/26] ARM: shmobile: Add Koelsch LED6, LED7 and LED8 support   Simon Horman
• [PATCH 12/26] ARM: shmobile: r7s72100 Genmai DT reference C bits   Simon Horman
• [PATCH 04/26] ARM: shmobile: Add Koelsch SW2 support   Simon Horman
• [PATCH 13/26] ARM: shmobile: r7s72100 Genmai Multiplatform   Simon Horman
• [PATCH 05/26] ARM: shmobile: r8a7791 Koelsch DT reference C bits   Simon Horman
• [PATCH 14/26] ARM: shmobile: lager: mark GPIO keys as wake-up sources   Simon Horman
• [PATCH 15/26] ARM: shmobile: Use ->init_late() on Koelsch   Simon Horman
• [PATCH 06/26] ARM: shmobile: bockw: fixup FPGA ioremap area   Simon Horman
• [PATCH 07/26] ARM: shmobile: bockw: add pin pull-up setting for SDHI   Simon Horman
• [PATCH 16/26] ARM: shmobile: koelsch: mark GPIO keys as wake-up sources   Simon Horman
• [PATCH 17/26] ARM: shmobile: Hook up SW30-SW36 on Koelsch   Simon Horman
• [PATCH 08/26] ARM: shmobile: lager: set .debounce_interval   Simon Horman
• [PATCH 18/26] ARM: shmobile: Use ->init_late() on Lager   Simon Horman
• [PATCH 09/26] ARM: shmobile: koelsch: set .debounce_interval   Simon Horman
• [PATCH 19/26] ARM: shmobile: Add pinctrl_register_mappings() for Koelsch   Simon Horman
• [PATCH 20/26] ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error   Simon Horman
• [PATCH 21/26] ARM: shmobile: Lager:add SPI FLASH support on QSPI   Simon Horman
• [PATCH 22/26] ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down   Simon Horman
• [PATCH 23/26] ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile   Simon Horman
• [PATCH 24/26] ARM: shmobile: armadillo: fixup FSI address size   Simon Horman
• [PATCH 25/26] ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG   Simon Horman
• [PATCH 26/26] ARM: shmobile: lager: add gpio/fixed regulator for SDHI   Simon Horman
• [GIT PULL] Second Round of Renesas ARM based SoC cleanups for v3.14   Simon Horman
• [PATCH] ARM: shmobile: remove unnecessary platform_device as header cleanup   Simon Horman
• [GIT PULL 0/3] Second Round of Renesas ARM Based SoC DT Updates for v3.13   Simon Horman
• [PATCH 1/3] ARM: shmobile: sh73a0: add FSI support via DTSI   Simon Horman
• [PATCH 2/3] ARM: shmobile: kzm9g: add FSI support for DTS   Simon Horman
• [PATCH 3/3] ARM: shmobile: koelsch: dts: Add gpio-keys device   Simon Horman
• [GIT PULL 0/3] Renesas SH SCI updates for v3.14   Simon Horman
• [PATCH 1/3] serial: sh-sci: Fix warnings due to improper casts and printk formats   Simon Horman
• [PATCH 2/3] serial: sh-sci: Don't enable/disable port from within break timer   Simon Horman
• [PATCH 3/3] serial: sh-sci: Convert to clk_prepare/unprepare   Simon Horman
• [PATCH v2 3/3] ARM: shmobile: kzm9d: Use common clock framework   Simon Horman
• [PATCH V2 2/5] arm: shmobile: r7s72100: add i2c clocks   Simon Horman
• [PATCH 2/2] ARM: shmobile: Lager: conditionally select CONFIG_MICREL_PHY   Simon Horman
• [GIT PULL 0/3] Second Round of Renesas ARM Based SoC DT Updates for v3.14   Simon Horman
• [PATCH 2/3] ARM: shmobile: kzm9g: add FSI support for DTS   Simon Horman
• [GIT PULL 0/7] Second Round of Renesas ARM Based SoC Defconfig Updates for v3.14   Simon Horman
• [PATCH 1/7] ARM: shmobile: lager: add gpio regulator support on defconfig   Simon Horman
• [PATCH 2/7] ARM: shmobile: lager: fixup I2C device on defconfig   Simon Horman
• [PATCH 3/7] ARM: shmobile: genmai: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 4/7] ARM: shmobile: Koelsch: enable Ether in defconfig   Simon Horman
• [PATCH 5/7] ARM: shmobile: armadillo800eva: Enable backlight control in defconfig   Simon Horman
• [PATCH 6/7] ARM: shmobile: koelsch: Enable CONFIG_PACKET in defconfig   Simon Horman
• [PATCH 7/7] ARM: shmobile: koelsch: Do not disable CONFIG_{INOTIFY_USER, UNIX} in defconfig   Simon Horman
• [GIT PULL 0/3] Second Round of Renesas ARM based SoC Fixes for v3.13   Simon Horman
• [PATCH 1/3] ARM: shmobile: armadillo: Add PWM backlight power supply   Simon Horman
• [PATCH 2/3] ARM: shmobile: bockw: fixup DMA mask   Simon Horman
• [PATCH 3/3] ARM: shmobile: r8a7790: fix shdi resource sizes   Simon Horman
• [GIT PULL 0/3] Renesas ARM based SoC IRQC Driver Updates for v3.14   Simon Horman
• [GIT PULL 0/3] Renesas ARM based SoC IRQC Driver Updates for v3.14   Simon Horman
• [PATCH 1/3] irqchip: renesas-irqc: Use lazy disable   Simon Horman
• [PATCH 2/3] irqchip: renesas-irqc: Enable mask on suspend   Simon Horman
• [PATCH 3/3] irq-renesas-irqc: simplify irq_set_type() method   Simon Horman
• [GIT PULL 00/13] Second Round of Renesas ARM Based SoC Updates for v3.14   Simon Horman
• [PATCH 01/13] ARM: shmobile: r8a7778: add SSIx DMAEngine support   Simon Horman
• [PATCH 02/13] ARM: shmobile: r8a7790: add I2C support   Simon Horman
• [PATCH 03/13] ARM: shmobile: sh73a0: add FSI clock support for DT   Simon Horman
• [PATCH 04/13] ARM: shmobile: r8a7778: camera-rcar header cleanup   Simon Horman
• [PATCH 05/13] ARM: shmobile: r8a7791: add Ether clock   Simon Horman
• [PATCH 06/13] ARM: rcar-gen2: Do not setup timer in non-secure mode   Simon Horman
• [PATCH 07/13] ARM: shmobile: r8a7778: add USB Func DMAEngine support   Simon Horman
• [PATCH 08/13] ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code   Simon Horman
• [PATCH 09/13] ARM: shmobile: r8a7790: Add clock index macros for DT sources   Simon Horman
• [PATCH 10/13] ARM: shmobile: r8a7791: Add clock index macros for DT sources   Simon Horman
• [PATCH 11/13] ARM: shmobile: rcar-gen2: Initialize CCF before clock sources   Simon Horman
• [PATCH 12/13] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Simon Horman
• [PATCH 13/13] arm: shmobile: clks: remove duplicated clock from r7s72100   Simon Horman
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Simon Horman
• [GIT PULL 00/11] Second Round of Renesas SH SCI updates for v3.14   Simon Horman
• [PATCH 01/11] serial: sh-sci: Sort headers alphabetically   Simon Horman
• [PATCH 02/11] serial: sh-sci: Remove baud rate calculation algorithm 5   Simon Horman
• [PATCH 03/11] serial: sh-sci: Simplify baud rate calculation algorithms   Simon Horman
• [PATCH 04/11] serial: sh-sci: Remove duplicate interrupt check in verify port op   Simon Horman
• [PATCH 05/11] serial: sh-sci: Set the UPF_FIXED_PORT flag   Simon Horman
• [PATCH 06/11] serial: sh-sci: Don't check IRQ in verify port operation   Simon Horman
• [PATCH 07/11] serial: sh-sci: Support resources passed through platform resources   Simon Horman
• [PATCH 08/11] serial: sh-sci: Move overrun_bit and error_mask fields out of pdata   Simon Horman
• [PATCH 09/11] serial: sh-sci: Remove unused GPIO request code   Simon Horman
• [PATCH 10/11] serial: sh-sci: Compute overrun_bit without using baud rate algo   Simon Horman
• [PATCH 11/11] serial: sh-sci: Rework baud rate calculation   Simon Horman
• [GIT PULL 00/29] Third Round of Renesas ARM Based SoC Updates for v3.14   Simon Horman
• [PATCH 01/29] ARM: shmobile: r8a7778: add sound SCU clock support   Simon Horman
• [PATCH 02/29] ARM: shmobile: sh7372: Use macros to declare SCIF devices   Simon Horman
• [PATCH 03/29] ARM: shmobile: sh73a0: Use macros to declare SCIF devices   Simon Horman
• [PATCH 04/29] ARM: shmobile: r8a7740: Use macros to declare SCIF devices   Simon Horman
• [PATCH 05/29] ARM: shmobile: r8a7779: Use macros to declare SCIF devices   Simon Horman
• [PATCH 10/29] ARM: shmobile: r8a7790: Don't define SCIF platform data in an array   Simon Horman
• [PATCH 06/29] ARM: shmobile: r8a73a4: Don't define SCIF platform data in an array   Simon Horman
• [PATCH 07/29] ARM: shmobile: r7s72100: Don't define SCIF platform data in an array   Simon Horman
• [PATCH 11/29] ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 12/29] ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 08/29] ARM: shmobile: r8a7778: Don't define SCIF platform data in an array   Simon Horman
• [PATCH 09/29] ARM: shmobile: r8a7791: Don't define SCIF platform data in an array   Simon Horman
• [PATCH 13/29] ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 14/29] ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 15/29] ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 16/29] ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 17/29] ARM: shmobile: sh7372: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 18/29] ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 19/29] ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 20/29] ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 21/29] ARM: shmobile: sh73a0: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 22/29] ARM: shmobile: r7s72100: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 23/29] ARM: shmobile: r8a7778: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 24/29] ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 25/29] ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 26/29] ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 27/29] ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 28/29] ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [PATCH 29/29] arm: shmobile: r7s72100: add i2c clocks   Simon Horman
• [GIT PULL 00/12] Second Round of Renesas ARM based SoC Board updates for v3.14   Simon Horman
• [PATCH 01/12] ARM: shmobile: koelsch: Add DU device   Simon Horman
• [PATCH 02/12] ARM: shmobile: Koelsch: add Ether support   Simon Horman
• [PATCH 03/12] ARM: shmobile: armadillo: Set backlight enable GPIO   Simon Horman
• [PATCH 04/12] ARM: shmobile: lager-reference: Enable multiplaform kernel support   Simon Horman
• [PATCH 05/12] ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization   Simon Horman
• [PATCH 06/12] ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT   Simon Horman
• [PATCH 07/12] ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT   Simon Horman
• [PATCH 08/12] ARM: shmobile: Remove non-multiplatform Lager reference support   Simon Horman
• [PATCH 09/12] ARM: shmobile: Remove non-multiplatform Koelsch reference support   Simon Horman
• [PATCH 10/12] ARM: shmobile: Let Lager multiplatform boot with Lager DTB   Simon Horman
• [PATCH 11/12] ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB   Simon Horman
• [PATCH 12/12] ARM: shmobile: mackerel: Fix USBHS pinconf entry   Simon Horman
• [GIT PULL 00/21] Third Round of Renesas ARM Based SoC DT Updates for v3.14   Simon Horman
• [PATCH 01/21] ARM: shmobile: armadillo: dts: Add PWM backlight power supply   Simon Horman
• [PATCH 02/21] ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO   Simon Horman
• [PATCH 10/21] ARM: shmobile: Sync Lager DTS with Lager reference DTS   Simon Horman
• [PATCH 03/21] ARM: shmobile: r8a73a4: Specify PFC interrupts in DT   Simon Horman
• [PATCH 04/21] ARM: shmobile: r8a7740: Specify PFC interrupts in DT   Simon Horman
• [PATCH 11/21] ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS   Simon Horman
• [PATCH 12/21] ARM: shmobile: lager: Specify external clock frequency in DT   Simon Horman
• [PATCH 05/21] ARM: shmobile: sh73a0: Specify PFC interrupts in DT   Simon Horman
• [PATCH 06/21] ARM: shmobile: armadillo: dts: Add gpio-keys device   Simon Horman
• [PATCH 13/21] ARM: shmobile: koelsch: Specify external clock frequency in DT   Simon Horman
• [PATCH 07/21] ARM: shmobile: r8a7790: Add clocks   Simon Horman
• [PATCH 14/21] ARM: shmobile: Remove Lager reference DTS   Simon Horman
• [PATCH 08/21] ARM: shmobile: r8a7790: Reference clocks   Simon Horman
• [PATCH 15/21] ARM: shmobile: Remove Koelsch reference DTS   Simon Horman
• [PATCH 09/21] ARM: shmobile: r8a7791: Add clocks   Simon Horman
• [PATCH 16/21] ARM: shmobile: r8a7790: Add MSIOF clocks in device tree   Simon Horman
• [PATCH 17/21] ARM: shmobile: r8a7791: Add MSIOF clocks in device tree   Simon Horman
• [PATCH 18/21] ARM: shmobile: r8a7790: Add QSPI module clock in device tree   Simon Horman
• [PATCH 19/21] ARM: shmobile: r8a7791: Add QSPI module clock in device tree   Simon Horman
• [PATCH 20/21] ARM: shmobile: r8a7790: Add SSI clocks in device tree   Simon Horman
• [PATCH 21/21] ARM: shmobile: r8a7791: Add SSI clocks in device tree   Simon Horman
• [PATCH 03/15] serial: sh-sci: Restrict non-COMPILE_TEST compilation   Simon Horman
• [GIT PULL 0/3] Renesas SH based SoC Updates for v3.14   Simon Horman
• [PATCH 1/3] sh: Declare SCIF register base and IRQ as resources   Simon Horman
• [PATCH 2/3] sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA ports   Simon Horman
• [PATCH 3/3] sh: Don't set plat_sci_port scbrr_algo_id field   Simon Horman
• [GIT PULL 0/4] Third Round of Renesas SH SCI Updates for v3.14   Simon Horman
• [PATCH 1/4] serial: sh-sci: Remove platform data scbrr_algo_id field   Simon Horman
• [PATCH 2/4] serial: sh-sci: Remove platform data mapbase and irqs fields   Simon Horman
• [PATCH 3/4] serial: sh-sci: Add device tree bindings documentation   Simon Horman
• [PATCH 4/4] serial: sh-sci: Add OF support   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Simon Horman
• [PATCH RFC v2 0/3] Add ethernet support for r7s72100   Simon Horman
• [PATCH RFC net-next v2 1/3] sh_eth: Add support for r7s72100   Simon Horman
• [PATCH RFC v2 2/3] ARM: shmobile: r7s72100: Add clock for r7s72100-ether   Simon Horman
• [PATCH RFC v2 3/3] ARM: shmobile: genmai: Enable r7s72100-ether   Simon Horman
• [PATCH V2 2/5] arm: shmobile: r7s72100: add i2c clocks   Simon Horman
• [PATCH 1/1] ARM: shmobile: Koelsch: pass Ether PHY IRQ   Simon Horman
• [PATCH 03/15] serial: sh-sci: Restrict non-COMPILE_TEST compilation   Simon Horman
• [PATCH 15/21] ARM: shmobile: Remove Koelsch reference DTS   Simon Horman
• [PATCH] ARM: shmobile: emev2: Use __initconst for const init definition   Simon Horman
• [GIT PULL 0/3] Renesas ARM based SoC IRQC Driver Updates for v3.14   Simon Horman
• [GIT PULL 0/3] Third Round of Renesas ARM based SoC Fixes for v3.13   Simon Horman
• [PATCH 1/3] ARM: shmobile: armadillo: Fix coherent DMA mask   Simon Horman
• [PATCH 2/3] ARM: shmobile: kzm9g: Fix coherent DMA mask   Simon Horman
• [PATCH 3/3] ARM: shmobile: mackerel: Fix coherent DMA mask   Simon Horman
• [PATCH 1/4] ARM: imx: update i.MX6Q dts setting of VDDARM_CAP voltage   Anson Huang
• [PATCH 3/4] ARM: imx: add VDDSOC/PU setpoint info into dts   Anson Huang
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Anson Huang
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Anson Huang
• [PATCH V2 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Anson Huang
• [PATCH V2 2/2] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Anson Huang
• [PATCH V2 2/2] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Anson Huang
• [PATCH V2 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Anson Huang
• [PATCH V3 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Anson Huang
• [PATCH V3 2/2] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Anson Huang
• [PATCH V4 1/3] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Anson Huang
• [PATCH V4 2/3] ARM: imx: add vddsoc/pu setpoint info into dts   Anson Huang
• [PATCH V4 3/3] cpufreq: imx6: Add device tree binding document   Anson Huang
• [PATCH] ARM: imx: enable cpufreq for i.mx6dl   Anson Huang
• [PATCH] ARM: dts: imx6qdl-sabresd: Add power key support   Anson Huang
• [PATCH 1/3] ARM: dts: imx6qdl: add necessary thermal clk   Anson Huang
• [PATCH 2/3] thermal: imx: add necessary clk operation   Anson Huang
• [PATCH 3/3] thermal: imx: add clk info for thermal sensor   Anson Huang
• [PATCH V2 2/2] thermal: imx: add necessary clk operation   Anson Huang
• [PATCH V2] ARM: dts: imx6qdl-sabresd: Add power key support   Anson Huang
• [PATCH V3 2/2] thermal: imx: add necessary clk operation   Anson Huang
• [PATCH V4] thermal: imx: add necessary clk operation   Anson Huang
• [PATCH] ARM: imx: improve the comment of CCM lpm SW workaround   Anson Huang
• [PATCH] ARM: imx: add necessary interface for pfd   Anson Huang
• [PATCH] ARM: imx: improve status check of clock gate   Anson Huang
• [PATCH V2] ARM: imx: improve the comment of CCM lpm SW workaround   Anson Huang
• [PATCH 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Ben Hutchings
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Kishon Vijay Abraham I
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Kishon Vijay Abraham I
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Kishon Vijay Abraham I
• [PATCH v2] phy: kconfig: add depends on "USB_PHY" to OMAP_USB2 and TWL4030_USB   Kishon Vijay Abraham I
• [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Kishon Vijay Abraham I
• [PATCH v2 0/2] usb: fix controller-PHY binding for OMAP3 platform   Kishon Vijay Abraham I
• [PATCH v2 1/2] usb: musb: omap: remove using PLATFORM_DEVID_AUTO in omap2430.c   Kishon Vijay Abraham I
• [PATCH v2 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy   Kishon Vijay Abraham I
• [PATCH v2 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy   Kishon Vijay Abraham I
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Kishon Vijay Abraham I
• [PATCH v3 07/10] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH] phy: omap_usb2: fix module dependency   Kishon Vijay Abraham I
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Kishon Vijay Abraham I
• [PATCH] phy: Add exynos-phy driver   Kishon Vijay Abraham I
• [PATCH v5 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Kishon Vijay Abraham I
• [PATCH v5 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Kishon Vijay Abraham I
• [PATCH v5 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Kishon Vijay Abraham I
• [PATCH] phy: Add exynos-phy driver   Kishon Vijay Abraham I
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Kishon Vijay Abraham I
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Kishon Vijay Abraham I
• [PATCH 2/5] phy: add support for indexed lookup   Kishon Vijay Abraham I
• [PATCH 4/5] arm: omap3: twl: use the new lookup method with usb phy   Kishon Vijay Abraham I
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Kishon Vijay Abraham I
• [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform   Kishon Vijay Abraham I
• [PATCH v3 1/2] usb: musb: omap: remove using PLATFORM_DEVID_AUTO in omap2430.c   Kishon Vijay Abraham I
• [PATCH v3 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy   Kishon Vijay Abraham I
• [PATCH 3/4] SATA: MV: Add support for the optional PHYs   Kishon Vijay Abraham I
• [PATCH 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY   Kishon Vijay Abraham I
• [PATCH v7 8/9] phy: add Broadcom Kona USB2 PHY driver   Kishon Vijay Abraham I
• [PATCH 2/4] Phy: Add a PHY driver for Marvell MVEBU SATA PHY.   Kishon Vijay Abraham I
• [PATCH RFC 1/4] phy: Add new Exynos5 USB 3.0 PHY driver   Kishon Vijay Abraham I
• [PATCH V3 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Kishon Vijay Abraham I
• [PATCH V3 2/2] ARM: dts: Enable ahci sata and sata phy   Kishon Vijay Abraham I
• [PATCH V4 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Kishon Vijay Abraham I
• [PATCH 00/11] ARM: support for ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Sergei Ianovich
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 03/11] rtc: support DS1302 RTC on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 04/11] mtd: support BB SRAM on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x   Sergei Ianovich
• [PATCH 06/11] misc: support for LP-8x4x custom parallel bus   Sergei Ianovich
• [PATCH 07/11] misc: support for serial slots in LP-8x4x   Sergei Ianovich
• [PATCH 08/11] misc: support for parallel slots in LP-8x4x   Sergei Ianovich
• [PATCH 09/11] misc: support for I-8041 in LP-8x4x   Sergei Ianovich
• [PATCH 10/11] misc: support for I-8042 in LP-8x4x   Sergei Ianovich
• [PATCH 11/11] misc: support for I-8024 in LP-8x4x   Sergei Ianovich
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Sergei Ianovich
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Sergei Ianovich
• [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x   Sergei Ianovich
• [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x   Sergei Ianovich
• [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x   Sergei Ianovich
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Sergei Ianovich
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Sergei Ianovich
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH v2] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 0/9] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH 1/9] ARM: dts: pxa2xx fix compatible strings   Sergei Ianovich
• [PATCH 2/9] ARM: dts: fix pxa27x-gpio interrupts   Sergei Ianovich
• [PATCH 3/9] ARM: fix ohci-pxa27x build error with OF enabled   Sergei Ianovich
• [PATCH 4/9] ARM: pxa: remove unused variable   Sergei Ianovich
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH 6/9] ARM: dts: pxa3xx: move declaration to header   Sergei Ianovich
• [PATCH 7/9] ARM: dts: pxa27x: skip static platform devices   Sergei Ianovich
• [PATCH 8/9] ARM: dts: pxa27x: device tree irq init   Sergei Ianovich
• [PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH 4/9] ARM: pxa: remove unused variable   Sergei Ianovich
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH v3] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH 3/9] ARM: fix ohci-pxa27x build error with OF enabled   Sergei Ianovich
• [PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 9/9] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 0/9] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH] ARM: pxa: prevent PXA270 occasional reboot freezes   Sergei Ianovich
• [PATCH 08/20] mmc: host: pxamci: switch over to dmaengine use   Sergei Ianovich
• [PATCH 08/20] mmc: host: pxamci: switch over to dmaengine use   Sergei Ianovich
• [PATCH 08/20] mmc: host: pxamci: switch over to dmaengine use   Sergei Ianovich
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 08/20] mmc: host: pxamci: switch over to dmaengine use   Sergei Ianovich
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v2 01/16] ARM: dts: pxa2xx fix compatible strings   Sergei Ianovich
• [PATCH v2 02/16] ARM: dts: fix pxa27x-gpio interrupts   Sergei Ianovich
• [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH v2 04/16] ARM: dts: pxa3xx: move declaration to header   Sergei Ianovich
• [PATCH v2 05/16] ARM: dts: pxa27x: irq init using device tree   Sergei Ianovich
• [PATCH v2 06/16] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v2 07/16] rtc: support DS1302 RTC on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v2 08/16] mtd: support BB SRAM on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v2 09/16] ARM: pxa: support ICP DAS LP-8x4x FPGA irq   Sergei Ianovich
• [PATCH v2 10/16] serial: support for 16550A serial ports on LP-8x4x   Sergei Ianovich
• [PATCH v2 11/16] misc: support for LP-8x4x custom parallel bus   Sergei Ianovich
• [PATCH v2 12/16] misc: support for serial slots in LP-8x4x   Sergei Ianovich
• [PATCH v2 13/16] misc: support for parallel slots in LP-8x4x   Sergei Ianovich
• [PATCH v2 14/16] misc: support for I-8041 in LP-8x4x   Sergei Ianovich
• [PATCH v2 15/16] misc: support for I-8042 in LP-8x4x   Sergei Ianovich
• [PATCH v2 16/16] misc: support for I-8024 in LP-8x4x   Sergei Ianovich
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v2 16/16] misc: support for I-8024 in LP-8x4x   Sergei Ianovich
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci   Sergei Ianovich
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v3 00/21] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v3 01/21 resend] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH v3 02/21] ARM: dts: pxa2xx fix compatible strings   Sergei Ianovich
• [PATCH v3 03/21] ARM: dts: fix pxa27x-gpio interrupts   Sergei Ianovich
• [PATCH v3 04/21] ARM: dts: pxa3xx: move declaration to header   Sergei Ianovich
• [PATCH v3 05/21] ARM: dts: pxa27x: irq init using device tree   Sergei Ianovich
• [PATCH v3 06/21] ARM: dts: provide DMA config to pxamci on PXA27x   Sergei Ianovich
• [PATCH v3 07/21] ARM: dts: parse DMA config in pxamci   Sergei Ianovich
• [PATCH v3 08/21] ARM: pxa27x: device tree support ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v3 09/21] rtc: support DS1302 RTC on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v3 10/21] mtd: support BB SRAM on ICP DAS LP-8x4x   Sergei Ianovich
• [PATCH v3 11/21] ARM: pxa: support ICP DAS LP-8x4x FPGA irq   Sergei Ianovich
• [PATCH v3 12/21] serial: support for 16550A serial ports on LP-8x4x   Sergei Ianovich
• [PATCH v3 13/21] misc: support for LP-8x4x custom parallel bus   Sergei Ianovich
• [PATCH v3 14/21] misc: support for LP-8x4x rotary switch   Sergei Ianovich
• [PATCH v3 15/21] misc: support for LP-8x4x DIP switch   Sergei Ianovich
• [PATCH v3 16/21] misc: support for writing to LP-8x4x EEPROM   Sergei Ianovich
• [PATCH v3 17/21] misc: support for serial slots in LP-8x4x   Sergei Ianovich
• [PATCH v3 18/21] misc: support for parallel slots in LP-8x4x   Sergei Ianovich
• [PATCH v3 19/21] misc: support for I-8041 in LP-8x4x   Sergei Ianovich
• [PATCH v3 20/21] misc: support for I-8042 in LP-8x4x   Sergei Ianovich
• [PATCH v3 21/21] misc: support for I-8024 in LP-8x4x   Sergei Ianovich
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v2 00/16] ARM: support for ICP DAS LP-8x4x (with dts)   Sergei Ianovich
• [PATCH v3 07/21] ARM: dts: parse DMA config in pxamci   Sergei Ianovich
• [PATCH v3 01/21 resend] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [PATCH v3 01/21 resend] serial: rewrite pxa2xx-uart to use 8250_core   Sergei Ianovich
• [RFC PATCH 0/3] APM X-Gene PCIe driver   Tanmay Inamdar
• [RFC PATCH 1/3] pci: APM X-Gene PCIe controller driver   Tanmay Inamdar
• [RFC PATCH 2/3] arm64: dts: APM X-Gene PCIe device tree nodes   Tanmay Inamdar
• [RFC PATCH 3/3] dt-bindings: pci: xgene pcie device tree bindings   Tanmay Inamdar
• [RFC PATCH 0/3] APM X-Gene PCIe driver   Tanmay Inamdar
• [PATCH 1/6] ALSA: AACI: Convert to modern PM ops   Takashi Iwai
• [PATCH 02/11] ASoC: ab8500: Revert back to find_next_bit()   Takashi Iwai
• [PATCH 02/11] ASoC: ab8500: Revert back to find_next_bit()   Takashi Iwai
• [PATCH 02/11] ASoC: ab8500: Revert back to find_next_bit()   Takashi Iwai
• [PATCH 02/11] ASoC: ab8500: Revert back to find_next_bit()   Takashi Iwai
• [PATCH] rtc: pxa: drop usage of CLOCK_TICK_RATE   Robert Jarzmik
• [PATCH v2] rtc: pxa: drop unused #define TIMER_FREQ   Robert Jarzmik
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Robert Jarzmik
• pwm-backlight: 3.13-rc1 regression for old arm machine   Robert Jarzmik
• pwm-backlight: 3.13-rc1 regression for old arm machine   Robert Jarzmik
• [PATCH] ARM: pxa: Add dummy backlight power supply on Mitac Mio A701   Robert Jarzmik
• [PATCH] gpio: MOXA ART: rename moxart_gpio_base to base   Jonas Jensen
• [PATCH v12] dmaengine: Add MOXA ART DMA engine driver   Jonas Jensen
• [PATCH] dma: fix vchan_cookie_complete() debug print   Jonas Jensen
• [PATCH v2] dma: fix vchan_cookie_complete() debug print   Jonas Jensen
• [PATCH v8] clk: add MOXA ART SoCs clock driver   Jonas Jensen
• [PATCH v5] mmc: sdhci-moxart: Add MOXA ART SDHCI driver   Jonas Jensen
• [PATCH v13] dmaengine: Add MOXA ART DMA engine driver   Jonas Jensen
• [PATCH v14] dmaengine: Add MOXA ART DMA engine driver   Jonas Jensen
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Jonas Jensen
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Jonas Jensen
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Jonas Jensen
• [PATCH v4 0/2] ARM: mach-moxart: add MOXA ART SoC support   Jonas Jensen
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Jonas Jensen
• [PATCH v4 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Jonas Jensen
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Jonas Jensen
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Jonas Jensen
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Jonas Jensen
• [PATCH v15] dmaengine: Add MOXA ART DMA engine driver   Jonas Jensen
• [PATCH v4 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Jonas Jensen
• [PATCH v5 0/2] ARM: mach-moxart: add MOXA ART SoC support   Jonas Jensen
• [PATCH v5 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Jonas Jensen
• [PATCH v5 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Jonas Jensen
• [PATCH v6 0/2] ARM: mach-moxart: add MOXA ART SoC support   Jonas Jensen
• [PATCH v6 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Jonas Jensen
• [PATCH v6 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Jonas Jensen
• [PATCH v5 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Jonas Jensen
• [PATCH] watchdog: mach-moxart: add restart handler   Jonas Jensen
• [PATCH v7 0/2] ARM: mach-moxart: add MOXA ART SoC support   Jonas Jensen
• [PATCH v7 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Jonas Jensen
• [PATCH v7 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Jonas Jensen
• [PATCH v6 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Jonas Jensen
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Seungwon Jeon
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Seungwon Jeon
• [PATCHv6 1/5] mmc: dw_mmc: Add support to set the SDR and DDR timing through clock framework   Seungwon Jeon
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Seungwon Jeon
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Seungwon Jeon
• [PATCH] ARM: dts: add clock provider for mshc node for Exynos4412 SOC   Seungwon Jeon
• [GIT PULL] ARM: mvebu: DT fixes for v3.13   Olof Johansson
• [alsa-devel] [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Olof Johansson
• [PATCH] ARM: multi_v7_defconfig: enable network for BeagleBone Black   Olof Johansson
• [GIT PULL] at91: fixes 3.13 #2   Olof Johansson
• [PATCH] ARM: multi_v7_defconfig: enable network for BeagleBone Black   Olof Johansson
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Olof Johansson
• [GIT PULL] more omap dt fixes against v3.13-rc1   Olof Johansson
• [PATCH] ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support   Olof Johansson
• [PATCH] ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16   Olof Johansson
• [GIT PULL] socfpga fix for 3.13   Olof Johansson
• [GIT PULL] ux500 defconfig changed for v3.13-rcs   Olof Johansson
• [GIT PULL] ux500 devicetree changes for v3.14, take one   Olof Johansson
• [GIT PULL 00/16] Renesas ARM based SoC cleanups for v3.14   Olof Johansson
• [PATCH 00/16] Renesas ARM based SoC defconfig updates for v3.14   Olof Johansson
• [GIT PULL] ARM: mvebu: soc changes for v3.14   Olof Johansson
• [GIT PULL] ARM: mvebu: DT changes for v3.14   Olof Johansson
• [GIT PULL] ARM: mvebu: driver changes for v3.14   Olof Johansson
• [GIT PULL] ARM: mvebu: defconfig changes for v3.14   Olof Johansson
• [GIT PULL 00/28] Renesas ARM based SoC updates for v3.14   Olof Johansson
• [GIT PULL] ARM: mvebu: DT changes for v3.14   Olof Johansson
• [GIT PULL] ARM: mvebu: DT changes for v3.14   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.13-rc   Olof Johansson
• Boot time errors/warnings on snowball   Olof Johansson
• [PATCH v2] ARM: highbank: handle soft poweroff and reset key events   Olof Johansson
• Boot time errors/warnings on snowball   Olof Johansson
• Boot time errors/warnings on snowball   Olof Johansson
• Boot time errors/warnings on snowball   Olof Johansson
• Boot time errors/warnings on snowball   Olof Johansson
• [GIT PULL] s3c64xx dmaengine conversion   Olof Johansson
• [PATCH v2 0/8] ARM: s3c64xx: Let amba-pl08x driver handle DMA   Olof Johansson
• [GIT PULL] at91: cleanup for 3.14 #1 (aka move to CCF)   Olof Johansson
• [PATCH] ARM: multi_v7_defconfig: Fix STi support   Olof Johansson
• [GIT PULL] DaVinci fixes for v3.13-rc3   Olof Johansson
• [PATCH] ARM: Clean up setup printks a bit   Olof Johansson
• [PATCH] ARM: Clean up setup printks a bit   Olof Johansson
• [GIT PULL] at91: cleanup for 3.14 #1 (aka move to CCF)   Olof Johansson
• [GIT PULL] at91: cleanup for 3.14 #1 (aka move to CCF)   Olof Johansson
• [PATCH] ARM: Clean up setup printks a bit   Olof Johansson
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Olof Johansson
• [RFC part2 PATCH 9/9] ACPI / GIC: Initialize GIC using the information in MADT   Olof Johansson
• [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs   Olof Johansson
• [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs   Olof Johansson
• [PATCH v4 0/9] ARM: Initial support for Marvell Berlin SoCs   Olof Johansson
• [PATCH] ARM: at91: remove redundant dependency   Olof Johansson
• [PATCH] clean up cache handling in platform code   Olof Johansson
• [GIT PULL][for 3.14] pull request from pxa   Olof Johansson
• [GIT PULL][for 3.14] pull request for mmp   Olof Johansson
• [GIT PULL v3][for 3.14] pull request for hisilicon soc   Olof Johansson
• [PATCH] ARM: tegra: add missing break to fuse initialization code   Olof Johansson
• [PATCH V2] ARM: tegra: add missing break to fuse initialization code   Olof Johansson
• [PATCH] MAINTAINERS: merge IMX6 entry into IMX   Olof Johansson
• [PATCH v5] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Olof Johansson
• [linux-sunxi] [PATCH RESEND 0/2] ARM: sunxi: Fix interrupt trigger types in the DT   Olof Johansson
• [GIT PULL][for 3.14] pull request from pxa   Olof Johansson
• [PATCH] net: eth: 8390: remove section warning in etherh.c   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.13-rc   Olof Johansson
• [PATCH] net: eth: 8390: remove section warning in etherh.c   Olof Johansson
• [PATCH v5] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Olof Johansson
• [PATCH v3] ARM: bcm: Add DEBUG_LL console support   Olof Johansson
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Olof Johansson
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Olof Johansson
• [PATCH] ARM: ux500: turn on PRINTK_TIME in u8500_defconfig   Olof Johansson
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Olof Johansson
• arm-soc: Xilinx Zynq dt changes for v3.14   Olof Johansson
• [PATCH 1/3] ARM: hisi: rename hi3xxx to hisi   Olof Johansson
• [PATCH] ARM: multi_v7: copy most options from tegra_defconfig   Olof Johansson
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Olof Johansson
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Olof Johansson
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Olof Johansson
• [GIT PULL] ARM: Fixes for 3.13-rc   Olof Johansson
• arm-soc: Xilinx Zynq dt changes for v3.14   Olof Johansson
• arm-soc: Xilinx Zynq cleanups for v3.14   Olof Johansson
• [GIT PULL] at91: drivers for 3.14 #1   Olof Johansson
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Olof Johansson
• [PATCH v4 2/2] ARM: mach-moxart: add MOXA ART SoC device tree files   Olof Johansson
• [PATCH] ARM: Remove duplicate SCHED_HRTICK config option   Olof Johansson
• [PATCH v6 0/2] ARM: mach-moxart: add MOXA ART SoC support   Olof Johansson
• [PATCH v7 0/2] ARM: mach-moxart: add MOXA ART SoC support   Olof Johansson
• [PATCH v2] MAINTAINERS: take maintainership for Energy Micro efm32 SoCs   Olof Johansson
• [PATCH] ARM: multi_v7: copy most options from tegra_defconfig   Olof Johansson
• [GIT PULL v2] ARM: Initial support for Marvell Berlin SoCs   Olof Johansson
• [GIT PULL 1/7] Samsung fixes for v3.14   Olof Johansson
• [GIT PULL 2/7] Samsung cleanup for v3.14   Olof Johansson
• [GIT PULL 3/7] Samsung defconfig for v3.14   Olof Johansson
• [GIT PULL 4/7] Samsung dev for v3.14   Olof Johansson
• [GIT PULL 5/7] Samsung irq for v3.14   Olof Johansson
• [GIT PULL 7/7] Samsung SoC for v3.14   Olof Johansson
• [GIT PULL 6/7] Samsung DT for v3.14   Olof Johansson
• [GIT PULL] at91: dt for 3.14 #2   Olof Johansson
• arm-soc during the holidays   Olof Johansson
• [PATCH] ARM: multi_v7: copy most options from tegra_defconfig   Olof Johansson
• [GIT PULL 7/7] Samsung SoC for v3.14   Olof Johansson
• [GIT PULL 2/7] Samsung cleanup for v3.14   Olof Johansson
• [GIT PULL 2nd 4/5] Samsung DT updates for v3.14   Olof Johansson
• [GIT PULL 2nd 1/5] Samsung non-critical fixes for v3.14   Olof Johansson
• [GIT PULL 7/7] Samsung SoC for v3.14   Olof Johansson
• [GIT PULL 10/10] ARM: tegra: defconfig changes   Olof Johansson
• [GIT PULL 1/2] ARM: tegra: second set of device tree changes   Olof Johansson
• [GIT PULL 2/2] ARM: tegra: second set of defconfig changes   Olof Johansson
• [GIT PULL] Allwinner drivers for 3.14   Olof Johansson
• [PATCH 03/11] ARM: EXYNOS: local regs-pmu.h header file   Olof Johansson
• [GIT PULL 2nd 2/5] Samsung cleanup for v3.14   Olof Johansson
• [GIT PULL 2nd 3/5] Samsung defconfig update for v3.14   Olof Johansson
• [GIT PULL 2nd 5/5] Samsung SoC update for v3.14   Olof Johansson
• [GIT PULL][for 3.13] pull request on fix from pxa   Olof Johansson
• [GIT PULL 0/3] Second Round of Renesas ARM based SoC Fixes for v3.13   Olof Johansson
• [GIT PULL 2nd 3/5] Samsung defconfig update for v3.14   Olof Johansson
• [GIT PULL 2nd 3/5] Samsung defconfig update for v3.14   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.13-rc   Olof Johansson
• [GIT PULL 00/26] Renesas ARM based SoC board updates for v3.14   Olof Johansson
• [GIT PULL] Second Round of Renesas ARM based SoC cleanups for v3.14   Olof Johansson
• [GIT PULL 0/3] Second Round of Renesas ARM Based SoC DT Updates for v3.14   Olof Johansson
• [GIT PULL 0/3] Renesas SH SCI updates for v3.14   Olof Johansson
• [GIT PULL 0/7] Second Round of Renesas ARM Based SoC Defconfig Updates for v3.14   Olof Johansson
• [GIT PULL 0/3] Renesas ARM based SoC IRQC Driver Updates for v3.14   Olof Johansson
• [GIT PULL 00/13] Second Round of Renesas ARM Based SoC Updates for v3.14   Olof Johansson
• [GIT PULL 2nd 3/5] Samsung defconfig update for v3.14   Olof Johansson
• [alsa-devel] [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Lee Jones
• [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Lee Jones
• [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Lee Jones
• [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation   Lee Jones
• [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Lee Jones
• [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller   Lee Jones
• [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller   Lee Jones
• [alsa-devel] [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Lee Jones
• [PATCH 1/3] ASoC: ux500_pcm: Stop pretending that we support varying address widths   Lee Jones
• [PATCH 2/3] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [PATCH 3/3] ASoC: ux500: Dynamically fill DAI driver data on probe   Lee Jones
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Lee Jones
• [alsa-devel] [PATCH 1/3] ASoC: ux500_pcm: Stop pretending that we support varying address widths   Lee Jones
• [alsa-devel] [PATCH 2/3] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [alsa-devel] [PATCH 3/3] ASoC: ux500: Dynamically fill DAI driver data on probe   Lee Jones
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Lee Jones
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Lee Jones
• [alsa-devel] [PATCH 3/3] ASoC: ux500: Dynamically fill DAI driver data on probe   Lee Jones
• [alsa-devel] [PATCH 2/3] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [PATCH 1/2] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [PATCH 2/2] ASoC: ux500: Dynamically fill DAI driver data on probe   Lee Jones
• [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation   Lee Jones
• [alsa-devel] [PATCH 1/2] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [alsa-devel] [PATCH 1/2] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation   Lee Jones
• [PATCH] ARM: ux500: delete U8549 UART auxdata   Lee Jones
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Lee Jones
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Lee Jones
• [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table   Lee Jones
• Boot time errors/warnings on snowball   Lee Jones
• Boot time errors/warnings on snowball   Lee Jones
• Boot time errors/warnings on snowball   Lee Jones
• [PATCH 07/10] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Lee Jones
• Boot time errors/warnings on snowball   Lee Jones
• Boot time errors/warnings on snowball   Lee Jones
• Boot time errors/warnings on snowball   Lee Jones
• Boot time errors/warnings on snowball   Lee Jones
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v5 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v5 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v5 1/3] mfd: tps6586x: add version detection   Lee Jones
• [PATCH v5 2/3] regulator: tps6586x: add and use correct voltage table   Lee Jones
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Lee Jones
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Lee Jones
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Lee Jones
• [PATCH v3 07/15] mfd: menelaus: Limit the usage of the_menelaus   Lee Jones
• [PATCH v3 08/15] mfd: menelaus: Pass menelaus_chip pointer to add/remove irq functions   Lee Jones
• [PATCH v3 09/15] mfd: menelaus: Pass menelaus_chip pointer to get/set voltage   Lee Jones
• [PATCH v3 10/15] mfd: menelaus: Pass menelaus_chip argument to menelaus <-> time helpers   Lee Jones
• [PATCH v3 11/15] mfd: menelaus: Start to use irqdomain   Lee Jones
• [PATCH v3 15/15] mfd: menelaus: Use devm_request_threaded_irq()   Lee Jones
• [PATCH v3 03/15] mfd: menelaus: Convert to threaded irq   Lee Jones
• [TRIVIAL PATCH 1/2] regulator: s5m8767: Define symbol for buck control mask   Lee Jones
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Lee Jones
• [PATCH v3 15/15] mfd: menelaus: Use devm_request_threaded_irq()   Lee Jones
• [PATCH v3 11/15] mfd: menelaus: Start to use irqdomain   Lee Jones
• [PATCH v3 08/15] mfd: menelaus: Pass menelaus_chip pointer to add/remove irq functions   Lee Jones
• [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Lee Jones
• [PATCH v3 11/15] mfd: menelaus: Start to use irqdomain   Lee Jones
• [PATCH v3 07/15] mfd: menelaus: Limit the usage of the_menelaus   Lee Jones
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Lee Jones
• [PATCH 1/8] mfd: ssbi: Remove platform data structs and hide ssbi type enum   Lee Jones
• [PATCH 2/8] mfd: ssbi: Constify buffer in ssbi_write   Lee Jones
• [PATCH 4/8] mfd: ssbi: Mark match table const   Lee Jones
• [PATCH 5/8] mfd: Move pm8xxx-irq.c contents into only driver that uses it   Lee Jones
• [PATCH 6/8] mfd: pm8921: Update for genirq changes   Lee Jones
• [PATCH 7/8] mfd: pm8921: Migrate to irqdomains   Lee Jones
• [PATCH 8/8] mfd: pm8921: Use ssbi regmap   Lee Jones
• [PATCH V2 2/4] mtd: spi-nor: add the basic data structures   Lee Jones
• [PATCH 3/3] ARM: ux500: regulators: Remove dead code for SD-card regulator   Lee Jones
• [PATCH 1/1] usb: musb: ux500_dma: fix potential NULL dereference error   Lee Jones
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Lee Jones
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Lee Jones
• [PATCH 07/10] mfd: menelaus: Start to use irqdomain   Lee Jones
• [PATCH 08/10] mfd: menelaus: Switch all children to threaded_irq   Lee Jones
• [PATCH v3 11/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations   Lee Jones
• Boot time errors/warnings on snowball   Lee Jones
• [PATCH 00/10] ASoC: ARM: ux500: Better prepare for full Device Tree   Lee Jones
• [PATCH 01/11] ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion   Lee Jones
• [PATCH 02/11] ASoC: ab8500: Revert back to find_next_bit()   Lee Jones
• [PATCH 03/11] ASoC: ux500: Provide better checking for Device Tree and/or Platform Data   Lee Jones
• [PATCH 04/11] ASoC: Ux500: Match platform by device node when booting Device Tree   Lee Jones
• [PATCH 05/11] ASoC: ux500_pcm: Stop pretending that we support varying address widths   Lee Jones
• [PATCH 06/11] ASoC: ux500_pcm: Expect different saved DMA data when obtaining from DAI store   Lee Jones
• [PATCH 07/11] ASoC: ux500_pcm: Extend Device Tree support to deal with DMA data   Lee Jones
• [PATCH 08/11] ASoC: ux500: Store DMA data in the DAI differently in the pdata and DT case   Lee Jones
• [PATCH 09/11] ASoC: ux500_pcm: Take out pointless dev_dbg() call   Lee Jones
• [PATCH 10/11] ASoC: ux500_pcm: Differentiate between pdata and DT initialisation   Lee Jones
• [PATCH 11/11] ASoC: ux500: Dramatically reduce the size of the DAI driver data struct   Lee Jones
• [PATCH 02/11] ASoC: ab8500: Revert back to find_next_bit()   Lee Jones
• [PATCH 02/11] ASoC: ab8500: Revert back to find_next_bit()   Lee Jones
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Lee Jones
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Lee Jones
• [PATCH 00/10] ASoC: ARM: ux500: Better prepare for full Device Tree   Lee Jones
• [PATCH 0/3] Exynos5420 Cpufreq support   Arun Kumar K
• [PATCH 1/3] ARM: EXYNOS: Add exynos5 CPU clock divider offsets   Arun Kumar K
• [PATCH 2/3] clk: exynos5420: Add alias names for cpu clocks   Arun Kumar K
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Arun Kumar K
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Arun Kumar K
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Arun Kumar K
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Arun Kumar K
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Arun Kumar K
• [PATCH v3 00/10] Add power management support for chipidea   Greg KH
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Greg KH
• [PATCH][RESEND 5/8] uio: uio_pruss: use gen_pool_dma_alloc() to allocate sram memory   Greg KH
• OMAP still fails - usb phy stuff   Greg KH
• [PATCHv7 04/12] driver/core: populate devices in order for IOMMUs   Greg KH
• [PATCH 2/6] misc: fuse: Add efuse driver for Tegra   Greg KH
• [PATCH 2/6] misc: fuse: Add efuse driver for Tegra   Greg KH
• [PATCH 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH V2 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH 3/5] drivers: net: APM X-Gene SoC Ethernet base driver   Greg KH
• [PATCH 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Greg KH
• [PATCH V6 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH V6 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V6 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V6 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V6 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V7 0/2] genirq: arm64: perf: support for percpu pmu interrupt   Vinayak Kale
• [PATCH V7 1/2] genirq: Add an accessor for IRQ_PER_CPU flag   Vinayak Kale
• [PATCH V7 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V7 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V7 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH V7 2/2] arm64: perf: add support for percpu pmu interrupt   Vinayak Kale
• [PATCH] arm64: print cpu frequency in /proc/cpuinfo   Vinayak Kale
• [PATCH] arm64: print cpu frequency in /proc/cpuinfo   Vinayak Kale
• [PATCH] arm64: print cpu frequency in /proc/cpuinfo   Vinayak Kale
• [RFC v2 0/4] Add basic support for ASV   Sachin Kamat
• [PATCH Resend 01/10] clk: bcm2835: Remove duplicate inclusion of clk-provider.h   Sachin Kamat
• [PATCH 2/7] pinctrl: exynos: add exynos5260 SoC specific data   Sachin Kamat
• [PATCH 1/7] ARM: EXYNOS: initial board support for exynos5260 SoC   Sachin Kamat
• [PATCH 5/7] clk/samsung: add support for pll2550xx   Sachin Kamat
• [PATCH 6/7] clk/samsung: add support for pll2650xx   Sachin Kamat
• [PATCH 1/1] clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll   Sachin Kamat
• [TRIVIAL PATCH 1/2] regulator: s5m8767: Define symbol for buck control mask   Sachin Kamat
• [TRIVIAL PATCH 1/2] regulator: s5m8767: Define symbol for buck control mask   Sachin Kamat
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Sachin Kamat
• [PATCH 3/3] clk: exynos5250: register APLL rate table   Sachin Kamat
• [PATCH Resend 1/1] clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll   Sachin Kamat
• [PATCH Resend 1/7] clk: SPEAr: Staticize clk_frac_ops   Sachin Kamat
• [PATCH Resend 2/7] clk: tegra: Staticize tegra_clk_periph_nodiv_ops   Sachin Kamat
• [PATCH Resend 3/7] clk: socfpga: Use NULL instead of 0   Sachin Kamat
• [PATCH Resend 4/7] clk: versatile: Staticize clk_sp810_timerclken_of_get   Sachin Kamat
• [PATCH Resend 5/7] clk: vt8500: Staticize vtwm_pll_ops   Sachin Kamat
• [PATCH Resend 6/7] clk: ux500: Remove extra semicolon   Sachin Kamat
• [PATCH Resend 7/7] clk: max77686: Remove redundant break   Sachin Kamat
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Sachin Kamat
• [PATCH Resend 01/10] clk: bcm2835: Remove duplicate inclusion of clk-provider.h   Sachin Kamat
• [PATCH 1/1] clk: si570: Remove redundant of_match_ptr helper   Sachin Kamat
• [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Sachin Kamat
• [PATCH 1/1] arm: Trivial cleanup in sp810.h   Sachin Kamat
• [PATCH Resend 1/1] clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll   Sachin Kamat
• [PATCH 3/3] clk: exynos5250: register APLL rate table   Sachin Kamat
• [GIT PULL 2nd 5/5] Samsung SoC update for v3.14   Sachin Kamat
• [PATCH 0/5] armv7 BE kvm support   Victor Kamensky
• [PATCH 1/5] ARM: kvm: replace push and pop with stdmb and ldmia instrs to enable assembler.h inclusion   Victor Kamensky
• [PATCH 2/5] ARM: fix KVM assembler files to work in BE case   Victor Kamensky
• [PATCH 3/5] ARM: kvm one_reg coproc set and get BE fixes   Victor Kamensky
• [PATCH 4/5] ARM: kvm vgic mmio should return data in BE format in BE case   Victor Kamensky
• [PATCH 5/5] ARM: kvm MMIO support BE host running LE code   Victor Kamensky
• [PATCH REPOST 0/5] armv7 BE kvm support   Victor Kamensky
• [PATCH REPOST 1/5] ARM: kvm: replace push and pop with stdmb and ldmia instrs to enable assembler.h inclusion   Victor Kamensky
• [PATCH REPOST 2/5] ARM: fix KVM assembler files to work in BE case   Victor Kamensky
• [PATCH REPOST 3/5] ARM: kvm one_reg coproc set and get BE fixes   Victor Kamensky
• [PATCH REPOST 4/5] ARM: kvm vgic mmio should return data in BE format in BE case   Victor Kamensky
• [PATCH REPOST 5/5] ARM: kvm MMIO support BE host running LE code   Victor Kamensky
• [PATCH 0/4] Add missing components for X-Gene reboot drivers.   Feng Kan
• [PATCH 1/4] Documentation: add dts binding for X-Gene reboot dts node.   Feng Kan
• [PATCH 2/4] arm64: add missing dts entry for X-Gene platform.   Feng Kan
• [PATCH 3/4] arm64: Enable system reset via arch Kconfig for X-Gene system.   Feng Kan
• [PATCH 4/4] arm64: removed using of the mask attribute in the dts for reset bit.   Feng Kan
• [PATCH 1/1] gic: change access of gicc_ctrl register to read modify write.   Feng Kan
• [PATCH 0/4] Add missing components for X-Gene reboot drivers.   Feng Kan
• [PATCH V4 3/3] cpufreq: imx6: Add device tree binding document   Sudeep KarkadaNagesha
• [PATCH v2] clk: exynos5420: fix cpll clock register offsets   Chander Kashyap
• [Patch v4 0/2] Enable all cpus in Exynos5420   Chander Kashyap
• [alsa-devel] [PATCH] ASoC: wm8731: fix dsp mode configuration   Charles Keepax
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Charles Keepax
• [PATCH] ASoC: wm8904: fix DSP mode B configuration   Charles Keepax
• [PATCHv11 00/49] ARM: TI SoC clock DT conversion   Keerthy
• [RFC v2 0/4] Add basic support for ASV   Abhilash Kesavan
• [RFC v2 1/4] power: asv: Add common ASV support for Samsung SoCs   Abhilash Kesavan
• [RFC v2 2/4] power: asv: Add a common ASV driver for Exynos SoCs.   Abhilash Kesavan
• [PATCH 0/5] Power Related Fixes for Exynos5250   Abhilash Kesavan
• [PATCH 1/5] clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock   Abhilash Kesavan
• [PATCH 2/5] ARM: EXYNOS5: Fix PMU register configuration for local power blocks   Abhilash Kesavan
• [PATCH 3/5] clk: max77686: Replace is_enabled() with is_prepared call-back   Abhilash Kesavan
• [PATCH 4/5] ARM: EXYNOS5250: Implement pm_power_off   Abhilash Kesavan
• [PATCH 5/5] ARM: dts: Setup the interrupt parent for max77686   Abhilash Kesavan
• [PATCH] ARM: EXYNOS5: Add PMU settings for exynos5420   Abhilash Kesavan
• [PATCH 0/5] Power Related Fixes for Exynos5250   Abhilash Kesavan
• [PATCH 2/5] ARM: EXYNOS5: Fix PMU register configuration for local power blocks   Abhilash Kesavan
• [PATCH 3/5] clk: max77686: Replace is_enabled() with is_prepared call-back   Abhilash Kesavan
• [PATCH 5/5] ARM: dts: Setup the interrupt parent for max77686   Abhilash Kesavan
• [PATCH 1/3] clk: samsung: exynos5250: Fix ACP gate register offset   Abhilash Kesavan
• [PATCH 2/3] clk: samsung: exynos5250: Add MDMA0 clocks   Abhilash Kesavan
• [PATCH 3/3] ARM: dts: Fix MDMA0 clock number   Abhilash Kesavan
• [PATCH 1/5] clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock   Abhilash Kesavan
• [PATCH] ARM: exynos: Allow wake-up using GIC interrupts   Abhilash Kesavan
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Abhilash Kesavan
• [PATCH 2/2] ARM: dts: Add node for GPIO keys on SMDK5420   Abhilash Kesavan
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Abhilash Kesavan
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Abhilash Kesavan
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Abhilash Kesavan
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Abhilash Kesavan
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Abhilash Kesavan
• [PATCH] drivers: clk: Fix build break introduced in 3e1e4a5f   Rashika Kheria
• [PATCH 1/2] ARM: check stack pointer in get_wchan   Konstantin Khlebnikov
• [PATCH 2/2] ARM: fix framepointer check in unwind_frame   Konstantin Khlebnikov
• [PATCH 2/2] ARM: fix framepointer check in unwind_frame   Konstantin Khlebnikov
• [PATCH 1/2] ARM64: check stack pointer in get_wchan   Konstantin Khlebnikov
• [PATCH 2/2] ARM64: fix framepointer check in unwind_frame   Konstantin Khlebnikov
• [PATCH v5 0/5] Update Davinci watchdog driver   Ivan Khoronzhuk
• [PATCH v5 1/5] watchdog: davinci: change driver to use WDT core   Ivan Khoronzhuk
• [PATCH v5 2/5] watchdog: davinci: use davinci_wdt_device structure to hold device data   Ivan Khoronzhuk
• [PATCH v5 3/5] watchdog: davinci: add GET_TIMELEFT option support   Ivan Khoronzhuk
• [PATCH v5 4/5] watchdog: davinci: add "timeout-sec" property   Ivan Khoronzhuk
• [PATCH v5 5/5] watchdog: davinci: reuse driver for keystone arch   Ivan Khoronzhuk
• [PATCH v6 1/5] watchdog: davinci: change driver to use WDT core   Ivan Khoronzhuk
• [PATCH v3 0/9] Reuse davinci-nand driver for Keystone arch   Ivan Khoronzhuk
• [PATCH v3 1/9] mtd: nand: davinci: fix driver registration   Ivan Khoronzhuk
• [PATCH v3 2/9] mtd: nand: davinci: return ENOMEM if memory allocation is failed   Ivan Khoronzhuk
• [PATCH v3 3/9] mtd: nand: davinci: check required ti, davinci-chipselect property   Ivan Khoronzhuk
• [PATCH v3 4/9] mtd: nand: davinci: simplify error handling   Ivan Khoronzhuk
• [PATCH v3 5/9] mtd: nand: davinci: move bindings under mtd   Ivan Khoronzhuk
• [PATCH v3 6/9] mtd: nand: davinci: extend description of bindings   Ivan Khoronzhuk
• [PATCH v3 7/9] mtd: nand: davinci: adjust DT properties to MTD generic   Ivan Khoronzhuk
• [PATCH v3 8/9] mtd: nand: davinci: reuse driver for Keystone arch   Ivan Khoronzhuk
• [PATCH v3 9/9] mtd: nand: davinci: don't request AEMIF address range   Ivan Khoronzhuk
• [PATCH v3] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Ivan Khoronzhuk
• [PATCH v3 0/2] Introduce AEMIF driver for Davinci/Keystone archs   Ivan Khoronzhuk
• [PATCH v3 1/2] memory: ti-aemif: introduce AEMIF driver   Ivan Khoronzhuk
• [PATCH v3 2/2] memory: ti-aemif: add bindings for AEMIF driver   Ivan Khoronzhuk
• [PATCH 0/3] Introduce clocksource driver for Keystone platform   Ivan Khoronzhuk
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH 3/3] arm: dts: keystone: add keystone timer entry   Ivan Khoronzhuk
• [PATCH v4 0/9] Reuse davinci-nand driver for Keystone arch   Ivan Khoronzhuk
• [PATCH v4 1/9] mtd: nand: davinci: fix driver registration   Ivan Khoronzhuk
• [PATCH v4 2/9] mtd: nand: davinci: return ENOMEM if memory allocation is failed   Ivan Khoronzhuk
• [PATCH v4 3/9] mtd: nand: davinci: check required ti, davinci-chipselect property   Ivan Khoronzhuk
• [PATCH v4 4/9] mtd: nand: davinci: simplify error handling   Ivan Khoronzhuk
• [PATCH v4 5/9] mtd: nand: davinci: move bindings under mtd   Ivan Khoronzhuk
• [PATCH v4 6/9] mtd: nand: davinci: extend description of bindings   Ivan Khoronzhuk
• [PATCH v4 7/9] mtd: nand: davinci: adjust DT properties to MTD generic   Ivan Khoronzhuk
• [PATCH v4 8/9] mtd: nand: davinci: reuse driver for Keystone arch   Ivan Khoronzhuk
• [PATCH v4 9/9] mtd: nand: davinci: don't request AEMIF address range   Ivan Khoronzhuk
• [PATCH v2 0/3] Introduce clocksource driver for Keystone platform   Ivan Khoronzhuk
• [PATCH v2 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v2 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v2 3/3] arm: dts: keystone: add keystone timer entry   Ivan Khoronzhuk
• [PATCH v3 0/3] Introduce clocksource driver for Keystone platform   Ivan Khoronzhuk
• [PATCH v3 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Ivan Khoronzhuk
• [PATCH v3 2/3] clocksource: keystone: add bindings for keystone timer   Ivan Khoronzhuk
• [PATCH v3 3/3] arm: dts: keystone: add keystone timer entry   Ivan Khoronzhuk
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Vasily Khoruzhick
• [PATCH CFT] ARM:S3C24XX: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Vasily Khoruzhick
• [PATCH v5 2/4] AArch64: KGDB: Add Basic KGDB support   Vijay Kilari
• [PATCH v5 2/4] AArch64: KGDB: Add Basic KGDB support   Vijay Kilari
• [PATCH] [RFC] ARM: mm: add configuration for the size of module space   Gioh Kim
• possible regression on 3.13 when calling flush_dcache_page   Joonsoo Kim
• possible regression on 3.13 when calling flush_dcache_page   Joonsoo Kim
• possible regression on 3.13 when calling flush_dcache_page   Joonsoo Kim
• [PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value   Kukjin Kim
• [PATCH V4 1/6] clk: exynos-audss: convert to platform device   Kukjin Kim
• [PATCH v4 2/4] clk: exynos5410: register clocks using common clock framework   Kukjin Kim
• [PATCH 1/3] ARM: EXYNOS: pmu: Constify data tables   Kukjin Kim
• [PATCH 1/3] ARM: dts: Leave Exynos5250 SPI controller disabled by default   Kukjin Kim
• [PATCH][RESEND] ARM: SAMSUNG: remove IRQF_DISABLED   Kukjin Kim
• [PATCH] ARM: SAMSUNG: remove unused SAMSUNG_GPIOLIB_4BIT Kconfig parameter   Kukjin Kim
• [PATCH] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Kukjin Kim
• [PATCH v5 0/3] Exynos 5410 support   Kukjin Kim
• [PATCH] ARM: s3c64xx: Do not select both CPU_V6 and CPU_V6K at the same time   Kukjin Kim
• [GIT PULL 1/7] Samsung fixes for v3.14   Kukjin Kim
• [GIT PULL 2/7] Samsung cleanup for v3.14   Kukjin Kim
• [GIT PULL 3/7] Samsung defconfig for v3.14   Kukjin Kim
• [GIT PULL 4/7] Samsung dev for v3.14   Kukjin Kim
• [GIT PULL 5/7] Samsung irq for v3.14   Kukjin Kim
• [GIT PULL 6/7] Samsung DT for v3.14   Kukjin Kim
• [GIT PULL 7/7] Samsung SoC for v3.14   Kukjin Kim
• [PATCH v3 0/6] Exynos device tree clean-up for 3.14   Kukjin Kim
• [RESEND] [PATCH V3] ARM: dts: Add DMA controller node info on Exynos5420.   Kukjin Kim
• [GIT PULL 1/7] Samsung fixes for v3.14   Kukjin Kim
• [PATCH 06/11] PM / devfreq: move definitions for exynos4_bus into drivers/devfreq   Kukjin Kim
• [PATCH 3/3] ARM: dts: Fix MDMA0 clock number   Kukjin Kim
• [PATCH v3 6/6] ARM: dts: exynos4: Add missing unit-address of sysreg node   Kukjin Kim
• [PATCH v2 1/1] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Kukjin Kim
• [PATCH] ARM: dts: add clock provider for mshc node for Exynos4412 SOC   Kukjin Kim
• [PATCH 2/3] ARM: dts: Add the missing "\" key in non-US keyboards for exynos5250-snow   Kukjin Kim
• [PATCH 1/3] ARM: EXYNOS: Add exynos5 CPU clock divider offsets   Kukjin Kim
• [PATCH] ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4   Kukjin Kim
• [PATCH] ARM: EXYNOS: Kill exynos_pm_late_initcall()   Kukjin Kim
• [PATCH 0/3] DW-MSHC support on Exynos4412-TRATS2 board   Kukjin Kim
• [PATCH] ARM: dts: Add CODEC MCLK for SMDK5250   Kukjin Kim
• [GIT PULL 4/7] Samsung dev for v3.14   Kukjin Kim
• [PATCH 3/3] ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix   Kukjin Kim
• [PATCH 3/3] ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix   Kukjin Kim
• [PATCH 3/3] ARM: dts: Rename Exynos5250 ChromeOS common file to have exynos prefix   Kukjin Kim
• [GIT PULL 2nd 0/5] Samsung updates for v3.14   Kukjin Kim
• [GIT PULL 2nd 1/5] Samsung non-critical fixes for v3.14   Kukjin Kim
• [GIT PULL 2nd 2/5] Samsung cleanup for v3.14   Kukjin Kim
• [GIT PULL 2nd 3/5] Samsung defconfig update for v3.14   Kukjin Kim
• [GIT PULL 2nd 4/5] Samsung DT updates for v3.14   Kukjin Kim
• [GIT PULL 2nd 5/5] Samsung SoC update for v3.14   Kukjin Kim
• [GIT PULL 7/7] Samsung SoC for v3.14   Kukjin Kim
• [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Kukjin Kim
• [GIT PULL 2/7] Samsung cleanup for v3.14   Kukjin Kim
• [GIT PULL 5/7] Samsung irq for v3.14   Kukjin Kim
• [GIT PULL 6/7] Samsung DT for v3.14   Kukjin Kim
• [GIT PULL 2nd 4/5] Samsung DT updates for v3.14   Kukjin Kim
• [PATCH] thermal: imx_thermal: add module device table   Russell King
• [PATCH 1/2] ARM: imx: initial SolidRun HummingBoard support   Russell King
• [PATCH 2/2] ARM: imx: update imx_v6_v7_defconfig   Russell King
• [PATCH V1 00/11] Update Sabre Lite   Troy Kisky
• [PATCH V1 01/11] ARM: dts: imx: sabrelite: add Dual Lite/Solo support   Troy Kisky
• [PATCH V1 02/11] ARM: dts: imx6qdl-sabrelite: Add uart1 support   Troy Kisky
• [PATCH V1 03/11] ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio   Troy Kisky
• [PATCH V1 04/11] ARM: dts: imx6qdl-sabrelite: add comments for pinctrl_hog   Troy Kisky
• [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings   Troy Kisky
• [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Troy Kisky
• [PATCH V1 07/11] ARM: dts: imx6qdl-sabrelite: add pwms for backlights   Troy Kisky
• [PATCH V1 08/11] ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy   Troy Kisky
• [PATCH V1 09/11] ARM: dts: imx6qdl-sabrelite: fix ENET group   Troy Kisky
• [PATCH V1 10/11] ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg   Troy Kisky
• [PATCH V1 11/11] ARM: dts: imx: add nitrogen6x board   Troy Kisky
• [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings   Troy Kisky
• [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Troy Kisky
• [PATCH V1 01/11] ARM: dts: imx: sabrelite: add Dual Lite/Solo support   Troy Kisky
• [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings   Troy Kisky
• [PATCH V1 03/11] ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio   Troy Kisky
• [PATCH V1 03/11] ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio   Troy Kisky
• [PATCH V2 00/13] Update Sabre Lite   Troy Kisky
• [PATCH V2 01/13] ARM: dts: imx6qdl-sabrelite: move pcie to imx6qdl-sabrelite.dtsi   Troy Kisky
• [PATCH V2 02/13] ARM: dts: imx6qdl-sabrelite: move USDHC4 CD to pinctrl_usdhc4   Troy Kisky
• [PATCH V2 03/13] ARM: dts: imx6qdl-sabrelite: move USDHC3 CD/WP to pinctrl_usdhc3   Troy Kisky
• [PATCH V2 04/13] ARM: dts: imx6qdl-sabrelite: move spi-nor CS to pinctrl_ecspi1   Troy Kisky
• [PATCH V2 05/13] ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg   Troy Kisky
• [PATCH V2 06/13] ARM: dts: imx6qdl-sabrelite: move phy reset to pinctrl_enet   Troy Kisky
• [PATCH V2 07/13] ARM: dts: imx6qdl-sabrelite: explicitly set pad for SGTL5000 sys_mclk   Troy Kisky
• [PATCH V2 08/13] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Troy Kisky
• [PATCH V2 09/13] ARM: dts: imx6qdl-sabrelite: add pwms for backlights   Troy Kisky
• [PATCH V2 10/13] ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy   Troy Kisky
• [PATCH V2 11/13] ARM: dts: imx6qdl-sabrelite: fix ENET group   Troy Kisky
• [PATCH V2 12/13] ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg   Troy Kisky
• [PATCH V2 13/13] ARM: dts: imx: add nitrogen6x board   Troy Kisky
• [PATCH V2 13/13] ARM: dts: imx: add nitrogen6x board   Troy Kisky
• [PATCH V3 1/1] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Troy Kisky
• [PATCH V1 0/7] Fix imx6 fec interrupts   Troy Kisky
• [PATCH V1 1/7] ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ   Troy Kisky
• [PATCH V1 2/7] ARM: dts: imx6qdl: add pingroups for enet with GPIO6 interrupt   Troy Kisky
• [PATCH V1 3/7] ARM: dts: imx6qdl-sabrelite: use MX6QDL_ENET_PINGRP_RGMII_MD   Troy Kisky
• [PATCH V1 4/7] ARM: dts: imx6qdl: use interrupts-extended for fec   Troy Kisky
• [PATCH V1 5/7] ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.   Troy Kisky
• [PATCH V1 6/7] ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.   Troy Kisky
• [PATCH V1 7/7] ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.   Troy Kisky
• [PATCH V1 1/7] ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ   Troy Kisky
• [PATCH V2 0/7] Fix imx6 fec interrupts   Troy Kisky
• [PATCH V2 1/7] ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ   Troy Kisky
• [PATCH V2 2/7] ARM: dts: imx6qdl: add pingroups for enet with GPIO6 interrupt   Troy Kisky
• [PATCH V2 3/7] ARM: dts: imx6qdl-sabrelite: use MX6QDL_ENET_PINGRP_RGMII_MD   Troy Kisky
• [PATCH V2 4/7] ARM: dts: imx6qdl: use interrupts-extended for fec   Troy Kisky
• [PATCH V2 5/7] ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.   Troy Kisky
• [PATCH V2 6/7] ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt.   Troy Kisky
• [PATCH V2 7/7] ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.   Troy Kisky
• [PATCH V2 5/7] ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.   Troy Kisky
• [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs   Marc Kleine-Budde
• [PATCH v4 16/17] usb: phy-mxs: fix the problem by only using 1st controller's register   Marc Kleine-Budde
• [PATCH v4 02/17] usb: phy-mxs: Add platform judgement code   Marc Kleine-Budde
• [PATCH v4 09/17] usb: phy-mxs: Enable IC fixes for related SoCs   Marc Kleine-Budde
• [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection   Marc Kleine-Budde
• [PATCH v4 17/17] usb: phy-mxs: do not set PWD.RXPWD1PT1 for low speed connection   Marc Kleine-Budde
• [PATCH v2 1/2] can + ARM i.MX53: use 24 MHz clock parent on i.MX53   Marc Kleine-Budde
• [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK   Marc Kleine-Budde
• [PATCH v3 10/10] usb: chipidea: imx: Enable CI_HDRC_IMX_EHCI_QUIRK   Marc Kleine-Budde
• [PATCH v5 08/15] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume   Marc Kleine-Budde
• [PATCH v5 09/15] usb: phy-mxs: Enable IC fixes for related SoCs   Marc Kleine-Budde
• [PATCH v5 12/15] usb: phy: Add set_wakeup API   Marc Kleine-Budde
• [PATCH v5 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Marc Kleine-Budde
• [PATCH v5 09/15] usb: phy-mxs: Enable IC fixes for related SoCs   Marc Kleine-Budde
• [PATCH v5 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Marc Kleine-Budde
• [PATCH 1/3] can: mcp251x: Convert driver to use common clk framework   Marc Kleine-Budde
• [PATCH v2 1/2] clk: add clk accuracy retrieval support   Uwe Kleine-König
• [PATCH 2/3] leds/pwm: Don't disable pwm when setting brightness to 0   Uwe Kleine-König
• [PATCH v2] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Uwe Kleine-König
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Uwe Kleine-König
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Uwe Kleine-König
• [PATCH 0/12] Getting rid of mach/timex.h usages below arch/arm   Uwe Kleine-König
• [PATCH 12/12] ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too   Uwe Kleine-König
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Uwe Kleine-König
• [PATCH 2/3] leds/pwm: Don't disable pwm when setting brightness to 0   Uwe Kleine-König
• [PATCH v2] rtc: pxa: drop unused #define TIMER_FREQ   Uwe Kleine-König
• [PATCH v5] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• oops broken on v7-M   Uwe Kleine-König
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Uwe Kleine-König
• [PATCH v3 01/15] mfd: menelaus: Drop __exit section annotation   Uwe Kleine-König
• [PATCH 2/3] leds/pwm: Don't disable pwm when setting brightness to 0   Uwe Kleine-König
• [PATCH v5] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH v5] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [GIT PULL] get rid of <mach/timex.h>   Uwe Kleine-König
• [PATCH] ARM: make isa_mode macro more robust and fix for v7-M   Uwe Kleine-König
• [PATCH] ARM: show_regs: on v7-M there are no FIQs, different processor modes, ...   Uwe Kleine-König
• [GIT PULL] Support for efm32   Uwe Kleine-König
• [PATCH 2/2] ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH 2/2] ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Uwe Kleine-König
• [PATCH 2/2] ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [GIT PULL] get rid of <mach/timex.h>   Uwe Kleine-König
• [PATCH 2/2] ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH v5] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH] ARM: rpc: stop using <mach/timex.h>   Uwe Kleine-König
• [GIT PULL] get rid of <mach/timex.h>   Uwe Kleine-König
• [GIT PULL] get rid of <mach/timex.h>   Uwe Kleine-König
• [PATCH] MAINTAINERS: take maintainership for Energy Micro efm32 SoCs   Uwe Kleine-König
• [PATCH v2] MAINTAINERS: take maintainership for Energy Micro efm32 SoCs   Uwe Kleine-König
• [PATCH] MAINTAINERS: ARM: SiRF: add sirf UART and watchdog to maintain list   Uwe Kleine-König
• [PATCH v3 14/15] ARM: add uprobes support   Taras Kondratiuk
• [PATCH v3 00/15] uprobes: Add uprobes support for ARM   Taras Kondratiuk
• [PATCH 0/5] ARM: kprobes: big endian support   Taras Kondratiuk
• [PATCH 1/5] ARM: kprobes: fix instruction fetch order with <asm/opcodes.h>   Taras Kondratiuk
• [PATCH 2/5] ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses   Taras Kondratiuk
• [PATCH 3/5] ARM: kprobes-test: use <asm/opcodes.h> for ARM instruction building   Taras Kondratiuk
• [PATCH 4/5] ARM: kprobes-test: use <asm/opcodes.h> for Thumb instruction building   Taras Kondratiuk
• [PATCH 5/5] ARM: kprobes-test: Workaround GAS .align bug   Taras Kondratiuk
• [PATCH] ARM: traps: fix opcode endianness when read from user memory   Taras Kondratiuk
• [PATCH 1/4] ARM: OMAP2+: raw read and write endian fix   Taras Kondratiuk
• [PATCH 2/4] ARM: OMAP: dmtimer: raw read and write endian fix   Taras Kondratiuk
• [PATCH 3/4] ARM: OMAP: counter-32k: raw read and write endian fix   Taras Kondratiuk
• [PATCH 4/4] ARM: OMAP: debug-leds: raw read and write endian fix   Taras Kondratiuk
• [PATCH 0/4] ARM: OMAP: raw read and write endian fix   Taras Kondratiuk
• [PATCH v2 01/15] mfd: menelaus: Drop __exit section annotation   Aaro Koskinen
• [PATCH v4 0/4] USB: OMAP1: Tahvo USB support for 770   Aaro Koskinen
• [PATCH v4 1/4] ARM: OMAP1: USB: move omap_usb_config to platform data   Aaro Koskinen
• [PATCH v4 2/4] USB: OMAP1: add extcon to platform data   Aaro Koskinen
• [PATCH v4 3/4] USB: OMAP1: OTG controller driver   Aaro Koskinen
• [PATCH v4 4/4] USB: OMAP1: Tahvo USB transceiver driver   Aaro Koskinen
• [PATCH v4 4/4] USB: OMAP1: Tahvo USB transceiver driver   Aaro Koskinen
• [PATCH] dma: mv_xor: fix kernel crash on probe error   Aaro Koskinen
• [PATCH] dma: mv_xor: fix kernel crash on probe error   Aaro Koskinen
• [PATCH v2] phy: kconfig: add depends on "USB_PHY" to OMAP_USB2 and TWL4030_USB   Aaro Koskinen
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Vinod Koul
• [PATCH REPOST] dma: tegra: use reset framework   Vinod Koul
• [PATCH v5 4/5] dma: mmp_pdma: add support for residue reporting   Vinod Koul
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Vinod Koul
• [PATCH v2] dma: pl330: ensure DMA descriptors are zero-initialised   Vinod Koul
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Vinod Koul
• [PATCH] dma: mv_xor: fix kernel crash on probe error   Vinod Koul
• [PATCH v6 0/3] mfd: max14577: Add max14577 MFD drivers   Krzysztof Kozlowski
• [PATCH v6 1/3] charger: max14577: Add charger support for Maxim 14577   Krzysztof Kozlowski
• [PATCH v6 2/3] regulator: max14577: Add regulator driver for Maxim 14577   Krzysztof Kozlowski
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v6 3/3] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [PATCH v7 0/3] mfd: max14577: Add max14577 MFD drivers   Krzysztof Kozlowski
• [PATCH v7 1/3] charger: max14577: Add charger support for Maxim 14577   Krzysztof Kozlowski
• [PATCH v7 2/3] regulator: max14577: Add regulator driver for Maxim 14577   Krzysztof Kozlowski
• [PATCH v7 3/3] mfd: max14577: Add device tree bindings document   Krzysztof Kozlowski
• [TRIVIAL PATCH 1/2] regulator: s5m8767: Define symbol for buck control mask   Krzysztof Kozlowski
• [PATCH 2/2] regulator: s5m8767: Fix driver probe fail on BUCK7/8 regulators   Krzysztof Kozlowski
• [TRIVIAL PATCH 1/2] regulator: s5m8767: Define symbol for buck control mask   Krzysztof Kozlowski
• [PATCH] mfd: s2mps11: Fix build after regmap field rename in sec-core.c   Krzysztof Kozlowski
• [PATCH] clk: exynos: File scope reg_save array should depend on PM_SLEEP   Krzysztof Kozlowski
• [PATCH v5 Resend 0/3] ARM: S5PV210: move to common clk framework   Mateusz Krawczuk
• [PATCH v5 Resend 1/3] clk: samsung: Add clock driver for s5pc110/s5pv210   Mateusz Krawczuk
• [PATCH v5 Resend 2/3] Cpufreq: s5pv210 cpufreq fixes for CCF   Mateusz Krawczuk
• [PATCH v5 Resend 3/3] ARM: s5pv210: Migrate clock handling to Common Clock Framework   Mateusz Krawczuk
• [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions   Tero Kristo
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Tero Kristo
• [PATCHv10 10/41] CLK: TI: add support for clockdomain binding   Tero Kristo
• [PATCHv10 22/41] ARM: dts: omap5 clock data   Tero Kristo
• [PATCHv10 03/41] CLK: ti: add init support for clock IP blocks   Tero Kristo
• [PATCHv10 21/41] ARM: dts: omap4 clock data   Tero Kristo
• [PATCHv11 00/49] ARM: TI SoC clock DT conversion   Tero Kristo
• [PATCHv11 01/49] clk: add support for registering clocks from description   Tero Kristo
• [PATCHv11 02/49] clk: fixed-rate: add support for registering fixed-rate clock from descriptor   Tero Kristo
• [PATCHv11 03/49] clk: divider: add support for registering divider clock from descriptor   Tero Kristo
• [PATCHv11 04/49] clk: mux: add support for registering mux clock from descriptor   Tero Kristo
• [PATCHv11 05/49] clk: gate: add support for registering gate clock from descriptor   Tero Kristo
• [PATCHv11 06/49] clk: add support for low level register ops   Tero Kristo
• [PATCHv11 07/49] clk: divider: add support for low level ops   Tero Kristo
• [PATCHv11 08/49] clk: gate: add support for low level ops   Tero Kristo
• [PATCHv11 09/49] clk: mux: add support for low level ops   Tero Kristo
• [PATCHv11 10/49] CLK: TI: add DT alias clock registration mechanism   Tero Kristo
• [PATCHv11 11/49] CLK: ti: add init support for clock IP blocks   Tero Kristo
• [PATCHv11 12/49] CLK: TI: Add DPLL clock support   Tero Kristo
• [PATCHv11 13/49] CLK: TI: add autoidle support   Tero Kristo
• [PATCHv11 14/49] clk: ti: add composite clock support   Tero Kristo
• [PATCHv11 15/49] CLK: ti: add support for ti divider-clock   Tero Kristo
• [PATCHv11 16/49] clk: ti: add support for TI fixed factor clock   Tero Kristo
• [PATCHv11 17/49] CLK: TI: add support for gate clock   Tero Kristo
• [PATCHv11 18/49] CLK: TI: add support for clockdomain binding   Tero Kristo
• [PATCHv11 19/49] clk: ti: add support for basic mux clock   Tero Kristo
• [PATCHv11 20/49] CLK: TI: add omap4 clock init file   Tero Kristo
• [PATCHv11 21/49] CLK: TI: add omap5 clock init file   Tero Kristo
• [PATCHv11 22/49] CLK: TI: omap5: Initialize USB_DPLL at boot   Tero Kristo
• [PATCHv11 23/49] CLK: TI: DRA7: Add APLL support   Tero Kristo
• [PATCHv11 24/49] CLK: TI: add dra7 clock init file   Tero Kristo
• [PATCHv11 25/49] CLK: TI: add am33xx clock init file   Tero Kristo
• [PATCHv11 26/49] CLK: TI: add interface clock support for OMAP3   Tero Kristo
• [PATCHv11 27/49] CLK: TI: add omap3 clock init file   Tero Kristo
• [PATCHv11 28/49] CLK: TI: add am43xx clock init file   Tero Kristo
• [PATCHv11 29/49] ARM: dts: omap4 clock data   Tero Kristo
• [PATCHv11 30/49] ARM: dts: omap5 clock data   Tero Kristo
• [PATCHv11 31/49] ARM: dts: dra7 clock data   Tero Kristo
• [PATCHv11 32/49] ARM: dts: clk: Add apll related clocks   Tero Kristo
• [PATCHv11 33/49] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock   Tero Kristo
• [PATCHv11 34/49] ARM: dts: DRA7: Add PCIe related clock nodes   Tero Kristo
• [PATCHv11 35/49] ARM: dts: am33xx clock data   Tero Kristo
• [PATCHv11 36/49] ARM: dts: omap3 clock data   Tero Kristo
• [PATCHv11 37/49] ARM: dts: AM35xx: use DT clock data   Tero Kristo
• [PATCHv11 38/49] ARM: dts: am43xx clock data   Tero Kristo
• [PATCHv11 39/49] ARM: OMAP2+: clock: add support for indexed memmaps   Tero Kristo
• [PATCHv11 40/49] ARM: OMAP2+: clock: use driver API instead of direct memory read/write   Tero Kristo
• [PATCHv11 41/49] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm   Tero Kristo
• [PATCHv11 42/49] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name   Tero Kristo
• [PATCHv11 43/49] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT   Tero Kristo
• [PATCHv11 44/49] ARM: OMAP2+: io: use new clock init API   Tero Kristo
• [PATCHv11 45/49] ARM: OMAP4: remove old clock data and link in new clock init code   Tero Kristo
• [PATCHv11 46/49] ARM: OMAP: DRA7: Enable clock init   Tero Kristo
• [PATCHv11 47/49] ARM: AM43xx: Enable clock init   Tero Kristo
• [PATCHv11 48/49] ARM: AM33xx: remove old clock data and link in new clock init code   Tero Kristo
• [PATCHv11 49/49] ARM: OMAP3: use DT clock init if DT data is available   Tero Kristo
• [PATCHv11 07/49] clk: divider: add support for low level ops   Tero Kristo
• [PATCHv11 07/49] clk: divider: add support for low level ops   Tero Kristo
• [PATCHv11 06/49] clk: add support for low level register ops   Tero Kristo
• [PATCHv11 43/49] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT   Tero Kristo
• [PATCHv11 01/49] clk: add support for registering clocks from description   Tero Kristo
• [PATCHv11 07/49] clk: divider: add support for low level ops   Tero Kristo
• [PATCHv12 00/49] ARM: TI SoC clock DT conversion   Tero Kristo
• [PATCHv12 01/49] clk: add support for registering clocks from description   Tero Kristo
• [PATCHv12 03/49] clk: divider: add support for registering divider clock from descriptor   Tero Kristo
• [PATCHv12 04/49] clk: mux: add support for registering mux clock from descriptor   Tero Kristo
• [PATCHv12 05/49] clk: gate: add support for registering gate clock from descriptor   Tero Kristo
• [PATCHv12 06/49] clk: add support for low level register ops   Tero Kristo
• [PATCHv12 07/49] clk: divider: add support for low level ops   Tero Kristo
• [PATCHv12 08/49] clk: gate: add support for low level ops   Tero Kristo
• [PATCHv12 09/49] clk: mux: add support for low level ops   Tero Kristo
• [PATCHv12 11/49] CLK: ti: add init support for clock IP blocks   Tero Kristo
• [PATCHv12 12/49] CLK: TI: Add DPLL clock support   Tero Kristo
• [PATCHv12 14/49] clk: ti: add composite clock support   Tero Kristo
• [PATCHv12 17/49] CLK: TI: add support for gate clock   Tero Kristo
• [PATCHv12 18/49] CLK: TI: add support for clockdomain binding   Tero Kristo
• [PATCHv12 23/49] CLK: TI: DRA7: Add APLL support   Tero Kristo
• [PATCHv12 43/49] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT   Tero Kristo
• [PATCH 03/15] serial: sh-sci: Restrict non-COMPILE_TEST compilation   Greg Kroah-Hartman
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Greg Kroah-Hartman
• [PATCH 2/3] ARM Coresight: Add address control support for ETM   Greg Kroah-Hartman
• [PATCH 3/3] ARM Coresight: Add PID control support for ETM tracing   Greg Kroah-Hartman
• [PATCH 3/3] ARM Coresight: Add PID control support for ETM tracing   Greg Kroah-Hartman
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Greg Kroah-Hartman
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Greg Kroah-Hartman
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Greg Kroah-Hartman
• [PATCH v4] ARM/serial: at91: switch atmel serial to use gpiolib   Greg Kroah-Hartman
• [PATCH 2/5] tty: serial: Limit msm_serial_hs driver to platforms that use it   Greg Kroah-Hartman
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Greg Kroah-Hartman
• [PATCH v6 10/17] serial: mpc512x: setup the PSC FIFO clock as well   Greg Kroah-Hartman
• [PATCH v6 11/17] USB: fsl-mph-dr-of: adjust for OF based clock lookup   Greg Kroah-Hartman
• [PATCH v6 09/17] serial: mpc512x: adjust for OF based clock lookup   Greg Kroah-Hartman
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Greg Kroah-Hartman
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Greg Kroah-Hartman
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Greg Kroah-Hartman
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Greg Kroah-Hartman
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Greg Kroah-Hartman
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   Greg Kroah-Hartman
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Greg Kroah-Hartman
• [PATCH 3.10 48/58] clockevents: Prefer CPU local devices over global devices   Greg Kroah-Hartman
• [PATCH] serial: pl011: also enable DMA Rx polling with no platform data   Greg Kroah-Hartman
• [PATCH v3 01/21 resend] serial: rewrite pxa2xx-uart to use 8250_core   Greg Kroah-Hartman
• [PATCH] MAINTAINERS: take maintainership for Energy Micro efm32 SoCs   Greg Kroah-Hartman
• Possible arm64 patches for stable   Greg Kroah-Hartman
• [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x   Heikki Krogerus
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Heikki Krogerus
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Heikki Krogerus
• [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x   Heikki Krogerus
• [PATCH 01/11] resolve PXA<->8250 serial device address conflict   Heikki Krogerus
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Heikki Krogerus
• [PATCH v2 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Heikki Krogerus
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Heikki Krogerus
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Heikki Krogerus
• [PATCH v2] serial: rewrite pxa2xx-uart to use 8250_core   Heikki Krogerus
• [PATCH v2 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY's   Heikki Krogerus
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Heikki Krogerus
• [PATCH 0/5] phy: remove the need for the phys to know about their users   Heikki Krogerus
• [PATCH 1/5] phy: unify the phy name parameters   Heikki Krogerus
• [PATCH 2/5] phy: add support for indexed lookup   Heikki Krogerus
• [PATCH 3/5] phy: improved lookup method   Heikki Krogerus
• [PATCH 4/5] arm: omap3: twl: use the new lookup method with usb phy   Heikki Krogerus
• [PATCH] phy: remove the old lookup method   Heikki Krogerus
• [PATCH v3 04/10] usb: dwc3: use quirks to know if a particualr platform doesn't have PHY   Heikki Krogerus
• [PATCH 2/5] phy: add support for indexed lookup   Heikki Krogerus
• [PATCH 4/5] arm: omap3: twl: use the new lookup method with usb phy   Heikki Krogerus
• [PATCH v3 01/21 resend] serial: rewrite pxa2xx-uart to use 8250_core   Heikki Krogerus
• [PATCH v3 01/21 resend] serial: rewrite pxa2xx-uart to use 8250_core   Heikki Krogerus
• [PATCH v3 12/21] serial: support for 16550A serial ports on LP-8x4x   Heikki Krogerus
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Tim Kryger
• [PATCH v4 0/8] Update Kona drivers to use clocks   Tim Kryger
• [PATCH v4 1/8] ARM: dts: Declare clocks as fixed on bcm11351   Tim Kryger
• [PATCH v4 2/8] ARM: dts: Specify clocks for UARTs on bcm11351   Tim Kryger
• [PATCH v4 3/8] Documentation: dt: kona-sdhci: Add clocks property   Tim Kryger
• [PATCH v4 4/8] ARM: dts: Specify clocks for SDHCIs on bcm11351   Tim Kryger
• [PATCH v4 5/8] mmc: sdhci-bcm-kona: Add basic use of clocks   Tim Kryger
• [PATCH v4 6/8] Documentation: dt: kona-timer: Add clocks property   Tim Kryger
• [PATCH v4 7/8] clocksource: kona: Add basic use of external clock   Tim Kryger
• [PATCH v4 8/8] ARM: dts: Specify clocks for timer on bcm11351   Tim Kryger
• [RESEND PATCH] ARM: dts: bcm28155-ap: Fix Card Detection GPIO   Tim Kryger
• [PATCH] ARM: dts: Leave sdio1 as disabled on bcm28155-ap   Tim Kryger
• [PATCH 0/2] Update bcm_defconfig   Tim Kryger
• [PATCH 1/2] ARM: bcm_defconfig: CONFIG_OABI_COMPAT default off   Tim Kryger
• [PATCH 2/2] ARM: bcm_defconfig: Unset CONFIG_CRYPTO_ANSI_CPRNG   Tim Kryger
• [RESEND PATCH] ARM: bcm_defconfig: Do not expect appended DTB   Tim Kryger
• [PATCH 0/2] Enable I2C on bcm28155-ap   Tim Kryger
• [PATCH 1/2] ARM: dts: bcm281xx: Add i2c busses   Tim Kryger
• [PATCH 2/2] ARM: dts: bcm28155-ap: Enable all the i2c busses   Tim Kryger
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Tim Kryger
• [PATCH v2] serial: 8250_dw: Improve unwritable LCR workaround   Tim Kryger
• [PATCH v4 1/8] ARM: dts: Declare clocks as fixed on bcm11351   Tim Kryger
• [PATCH v4 1/8] ARM: dts: Declare clocks as fixed on bcm11351   Tim Kryger
• ARM64: Domain Equivalent support in ARMv8   Ganapat Rao P Kulkarni
• ARM64: Domain Equivalent support in ARMv8   Ganapat Rao P Kulkarni
• ARM64: Domain Equivalent support in ARMv8   Ganapat Rao P Kulkarni
• [PATCH 00/12] PCI:Add SPEAr13xx PCie support   Mohit Kumar
• [PATCH 01/12] SPEAr13xx: Correct dt field name for stmmac phy-addr   Mohit Kumar
• [PATCH 02/12] SPEAr13xx: Move SPEAr1340 definitions to header file   Mohit Kumar
• [PATCH 03/12] SPEAr13xx: Add SPEAr1310 PCIe register definitions   Mohit Kumar
• [PATCH 04/12] SPEAr13xx: Fix static mapping table   Mohit Kumar
• [PATCH 05/12] clk: SPEAr13xx: Fix pcie clock name   Mohit Kumar
• [PATCH 06/12] pcie: designware: Move register definition to the header file   Mohit Kumar
• [PATCH 07/12] pcie: designware: add dw_pcie prefix before cfg_read/write   Mohit Kumar
• [PATCH 08/12] pcie: designware: Fix IO transfers   Mohit Kumar
• [PATCH 09/12] pcie: SPEAr13xx: Add designware pcie support   Mohit Kumar
• [PATCH 10/12] SPEAr13xx: defconfig: Update   Mohit Kumar
• [PATCH 11/12] MAINTAINERS: Add ST SPEAr13xx PCIe driver maintainer   Mohit Kumar
• [PATCH 12/12] MAINTAINERS: Add Synopsis Designware PCIe driver maintainer   Mohit Kumar
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Viresh Kumar
• [PATCH 2/2] cpufreq: highbank: rework the kconfig dependencies for arm64   Viresh Kumar
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Viresh Kumar
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Viresh Kumar
• [PATCH 08/11] cpufreq: exynos: move definitions for exynos-cpufreq into drivers/cpufreq/   Viresh Kumar
• [PATCH] cpufreq: imx6q-cpufreq driver is reused on i.MX6 series SoCs   Viresh Kumar
• [PATCH V7 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot   Viresh Kumar
• [PATCH 1/1] arm: Trivial cleanup in sp810.h   Viresh Kumar
• [PATCH V2 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Yuvaraj Kumar
• [PATCH V2 2/2] ARM: dts: Enable ahci sata and sata phy   Yuvaraj Kumar
• [PATCH V2] i2c: s3c2410 : Add polling mode support   Yuvaraj Kumar
• [PATCH V3 0/2] Exynos5250 SATA Support   Yuvaraj Kumar
• [PATCH V3 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Yuvaraj Kumar
• [PATCH 1/3] ARM: EXYNOS: pmu: Constify data tables   Daniel Kurtz
• [PATCH 06/38] arm: mach-s3c64: add missing put_device call   Levente Kurusa
• [PATCH 07/38] arm: locomo: add missing put_device call   Levente Kurusa
• [PATCH 08/38] arm: mach-rpc: add missing put_device call   Levente Kurusa
• [PATCH 09/38] arm: mach-imx: add missing put_device calls   Levente Kurusa
• [PATCH 10/38] arm: exynos: add missing put_device call   Levente Kurusa
• [PATCH 11/38] arm: mach-integrator: add missing put_device call   Levente Kurusa
• [PATCH 12/38] arm: s5pv210: add missing put_device call   Levente Kurusa
• [PATCH v2 0/5] Kesytone II USB support   WingMan Kwok
• [PATCH v2 1/5] usb: dwc3: Add Keystone specific glue layer   WingMan Kwok
• [PATCH v2 2/5] usb: phy: Add keystone usb phy driver   WingMan Kwok
• [PATCH v2 3/5] ARM: dts: keystone: Add usb phy devicetree bindings   WingMan Kwok
• [PATCH v2 4/5] ARM: dts: keystone: Add usb devicetree bindings   WingMan Kwok
• [PATCH v2 5/5] ARM: keystone: defconfig: enable USB support   WingMan Kwok
• [PATCH v3 0/2] Kesytone II USB host and PHY drivers   WingMan Kwok
• [PATCH v3 1/2] usb: dwc3: Add Keystone specific glue layer   WingMan Kwok
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   WingMan Kwok
• [PATCH v3 0/3] ARM: dts: Keystone II USB nodes   WingMan Kwok
• [PATCH v3 1/3] ARM: dts: keystone: Add usb phy devicetree bindings   WingMan Kwok
• [PATCH v3 2/3] ARM: dts: keystone: Add usb devicetree bindings   WingMan Kwok
• [PATCH v3 3/3] ARM: keystone: defconfig: enable USB support   WingMan Kwok
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   Kwok, WingMan
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   Kwok, WingMan
• [PATCH v4 0/2] Kesytone II USB host and PHY drivers   WingMan Kwok
• [PATCH v4 1/2] usb: dwc3: Add Keystone specific glue layer   WingMan Kwok
• [PATCH v4 2/2] usb: phy: Add keystone usb phy driver   WingMan Kwok
• [PATCH v5 1/2] usb: dwc3: Add Keystone specific glue layer   WingMan Kwok
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Kwok, WingMan
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Kwok, WingMan
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Kwok, WingMan
• [PATCH v2 1/2] gpio: davinci: don't create irq_domain in case of unbanked irqs   Prabhakar Lad
• [PATCH v2 2/2] gpio: davinci: reuse for Keystone SoC   Prabhakar Lad
• [PATCH v3 2/2] gpio: davinci: reuse for Keystone SoC   Prabhakar Lad
• [PATCH v3 2/2] gpio: davinci: reuse for Keystone SoC   Prabhakar Lad
• [PATCH v7 07/14] usb: phy-mxs: change description of usb device speed   David Laight
• [PATCH] Documentation/Changes: update binutils version requirement for ARMv7 builds   Rob Landley
• [PATCH] Documentation/Changes: update binutils version requirement for ARMv7 builds   Rob Landley
• [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [linux-sunxi] Re: [PATCH 2/5] ARM: dts: sun4i: Add support for mmc   David Lanzendörfer
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   David Lanzendörfer
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   David Lanzendörfer
• [PATCH 0/25] fix error return code   Julia Lawall
• [PATCH 23/25] thermal: exynos: fix error return code   Julia Lawall
• kernel BUG at kernel/kallsyms.c:222!   Ming Lei
• [PATCH 1/5] arm64: Fix __data_loc value   Geoff Levand
• [PATCH 0/5] a few small fixups for arm64   Geoff Levand
• [PATCH 4/5] arm64: Add missing AT() macros to vmlinux.lds.S   Geoff Levand
• [PATCH 3/5] arm64: Fix include header order in vmlinux.lds.S   Geoff Levand
• [PATCH 5/5] arm64: Add LOAD_OFFSET symbol for linker scripts   Geoff Levand
• [PATCH 2/5] arm64: Fix the soft_restart routine   Geoff Levand
• [PATCH 1/5] arm64: Fix __data_loc value   Geoff Levand
• [PATCH v2 1/5] arm64: Remove unused __data_loc variable   Geoff Levand
• [PATCH 4/5] arm64: Add missing AT() macros to vmlinux.lds.S   Geoff Levand
• [PATCH 5/5] arm64: Add LOAD_OFFSET symbol for linker scripts   Geoff Levand
• [PATCH v2 2/5] arm64: Fix the soft_restart routine   Geoff Levand
• [PATCH 2/5] arm64: Fix the soft_restart routine   Geoff Levand
• [PATCH 5/5] arm64: Add LOAD_OFFSET symbol for linker scripts   Geoff Levand
• [REPOST PATCH] ARM: sunxi: stop timer from ticking before enabling interrupts   Daniel Lezcano
• [PATCH/RESEND] clocksource: armada-370-xp: Enable timer divider only when needed   Daniel Lezcano
• [REPOST PATCH] ARM: sunxi: stop timer from ticking before enabling interrupts   Daniel Lezcano
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Daniel Lezcano
• [PATCH v2] clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE   Daniel Lezcano
• panda board es failed on cpuidle   Daniel Lezcano
• questions of cpuidle   Daniel Lezcano
• questions of cpuidle   Daniel Lezcano
• questions of cpuidle   Daniel Lezcano
• [GIT PULL RESEND2] clocksource/clockevents fixes for 3.13   Daniel Lezcano
• [PATCH 1/6] clocksource: time-efm32: Select CLKSRC_MMIO   Daniel Lezcano
• [PATCH 2/6] clocksource: armada-370-xp: Register sched_clock after the counter reset   Daniel Lezcano
• [PATCH 3/6] clocksource: clksrc-of: Do not drop unheld reference on device node   Daniel Lezcano
• [PATCH 4/6] clocksource: sunxi: Stop timer from ticking before enabling interrupts   Daniel Lezcano
• [PATCH 5/6] clocksource: dw_apb_timer_of: Fix read_sched_clock   Daniel Lezcano
• [PATCH 6/6] clocksource: dw_apb_timer_of: Fix support for dts binding "snps, dw-apb-timer"   Daniel Lezcano
• [PATCH 6/6] clocksource: dw_apb_timer_of: Fix support for dts binding "snps, dw-apb-timer"   Daniel Lezcano
• [GIT PULL RESEND2] clocksource/clockevents fixes for 3.13   Daniel Lezcano
• [PATCH 1/2] time: Serialize calls to 'clockevents_update_freq' in the timing core   Daniel Lezcano
• [PATCH 1/2] time: Serialize calls to 'clockevents_update_freq' in the timing core   Daniel Lezcano
• [PATCH v2 5/9] clocksource/cadence_ttc: Adjust interval in clock notifier   Daniel Lezcano
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Daniel Lezcano
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Daniel Lezcano
• [PATCH v2 2/4] rename ARCH_BCM to ARCH_BCM_MOBILE (clocksource)   Daniel Lezcano
• [PATCH] ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function   Daniel Lezcano
• [PATCH] ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function   Daniel Lezcano
• [PATCH v4 7/8] clocksource: kona: Add basic use of external clock   Daniel Lezcano
• [GIT PULL] Renesas ARM based SoC Clocksource updates for v3.14   Daniel Lezcano
• [GIT PULL] Renesas ARM based SoC Clocksource updates for v3.14   Daniel Lezcano
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Daniel Lezcano
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Daniel Lezcano
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Daniel Lezcano
• Could you include clockevents/clocksource tree in linux-next ?   Daniel Lezcano
• [PATCH v2 3/9] clocksource/cadence_ttc: Store timer frequency in driver data   Daniel Lezcano
• [PATCH v3 3/3] arm: dts: keystone: add keystone timer entry   Daniel Lezcano
• [GIT PULL] clockevents/clocksource : new material for 3.14   Daniel Lezcano
• [PATCH 01/20] clockevent: sun4i: Fill the irq field in the clockevent structure   Daniel Lezcano
• [PATCH 02/20] clocksource: sun4i: Change CPU mask to cpu_possible_mask   Daniel Lezcano
• [PATCH 03/20] clocksource: sun4i: Increase a bit the clock event and sources rating   Daniel Lezcano
• [PATCH 04/20] clocksource: Add Allwinner SoCs HS timers driver   Daniel Lezcano
• [PATCH 05/20] ARM: sun5i: a10s: Add support for the High Speed Timers   Daniel Lezcano
• [PATCH 06/20] ARM: sun5i: a13: Add support for the High Speed Timers   Daniel Lezcano
• [PATCH 07/20] ARM: sun7i: a20: Add support for the High Speed Timers   Daniel Lezcano
• [PATCH 08/20] clocksource: arm_global_timer: Switch to sched_clock_register()   Daniel Lezcano
• [PATCH 09/20] clocksource: cadence_ttc_timer: Switch to sched_clock_register()   Daniel Lezcano
• [PATCH 10/20] clocksource: sun4i: Switch to sched_clock_register()   Daniel Lezcano
• [PATCH 11/20] clocksource: orion: Switch to sched_clock_register()   Daniel Lezcano
• [PATCH 12/20] clocksource: clksrc-of: Warn if no clock sources are found   Daniel Lezcano
• [PATCH 13/20] clocksource: armada-370-xp: Enable timer divider only when needed   Daniel Lezcano
• [PATCH 14/20] clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()   Daniel Lezcano
• [PATCH 15/20] clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()   Daniel Lezcano
• [PATCH 16/20] clocksource: misc drivers: Remove deprecated IRQF_DISABLED   Daniel Lezcano
• [PATCH 17/20] clocksource: tegra: Remove deprecated IRQF_DISABLED   Daniel Lezcano
• [PATCH 18/20] clocksource: vt8500: Remove deprecated IRQF_DISABLED   Daniel Lezcano
• [PATCH 19/20] clocksource: bcm_kona_timer: Remove unused bcm_timer_ids   Daniel Lezcano
• [PATCH 20/20] clocksource: sh_cmt: Add clk_prepare/unprepare support   Daniel Lezcano
• [GIT PULL] clockevents/clocksources: 3.13 fixes   Daniel Lezcano
• [PATCH] clocksource: cadence_ttc: Fix mutex taken inside interrupt context   Daniel Lezcano
• [GIT PULL] ARM : cpuidle: 3.13 fix   Daniel Lezcano
• [PATCH] ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function   Daniel Lezcano
• [PATCH 01/17] ARM: spear: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 02/17] ARM: ixp4xx: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 03/17] ARM: sa1100: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 04/17] ARM: mmp: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 05/17] ARM: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 06/17] ARM: cns3xxx: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 07/17] ARM: footbridge: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 08/17] ARM: ks8695: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 09/17] ARM: u300: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 10/17] ARM: rpc: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 11/17] ARM: iop: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 12/17] ARM: integrator: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 13/17] ARM: lpc32xx: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 14/17] ARM: netx: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 15/17] ARM: imx: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 16/17] ARM: ebsa110: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 17/17] ARM: w90x900: Remove deprecated IRQF_DISABLED flag   Daniel Lezcano
• [PATCH 1/2] spi: spi-imx: enable dma support for escpi controller   Frank Li
• [PATCH 2/2] ARM: dts: imx: enable dma for spi   Frank Li
• [RFC] pwm: Add Freescale FTM PWM driver support   Xiubo Li
• [PATCHv7 0/4] Add Freescale FTM PWM driver.   Xiubo Li
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li
• [PATCHv7 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.   Xiubo Li
• [PATCHv7 3/4] ARM: dts: Enables FTM PWM device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCHv7 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Xiubo Li
• [PATCHv3 0/8] ALSA: Add SAI driver and enable SGT15000 codec   Xiubo Li
• [PATCHv3 1/7] ALSA: Add SAI SoC Digital Audio Interface driver.   Xiubo Li
• [PATCHv3 2/7] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Xiubo Li
• [PATCHv3 3/7] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCHv3 4/7] Documentation: Add device tree bindings for Freescale SAI.   Xiubo Li
• [PATCHv3 5/7] ASoC: fsl: Add SGTL5000 based audio machine driver.   Xiubo Li
• [PATCHv3 6/7] ARM: dts: Enable SGTL5000 codec based audio driver node for VF610 TOWER.   Xiubo Li
• [PATCHv3 7/7] Documentation: Add device tree bindings for Freescale VF610 sound.   Xiubo Li
• [PATCHv4 1/4] ALSA: Add SAI SoC Digital Audio Interface driver.   Xiubo Li
• [PATCHv4 2/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Xiubo Li
• [PATCHv4 3/4] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCHv4 4/4] Documentation: Add device tree bindings for Freescale SAI.   Xiubo Li
• [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode   Zhong Li
• [PATCH] serial: pl011: also enable DMA Rx polling with no platform data   Guennadi Liakhovetski
• [PATCH] serial: pl011: also enable DMA Rx polling with no platform data   Guennadi Liakhovetski
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Grant Likely
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Grant Likely
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Grant Likely
• [PATCH v3 2/3] arm: Add [U]EFI runtime services support   Grant Likely
• [PATCH v3 3/3] init: efi: arm: enable (U)EFI runtime services on arm   Grant Likely
• [PATCH v3 0/3] (U)EFI runtime services for arm   Grant Likely
• [PATCH 2/3] doc: arm64: add description of EFI stub support   Grant Likely
• [PATCH V5 1/6] efi-stub.txt updates for ARM   Grant Likely
• [PATCH V5 2/6] Add shared update_fdt() function for ARM/ARM64   Grant Likely
• [PATCH V5 2/6] Add shared update_fdt() function for ARM/ARM64   Grant Likely
• [PATCH V5 4/6] Add EFI stub for ARM   Grant Likely
• [PATCH V5 6/6] Add config EFI_STUB for ARM to Kconfig   Grant Likely
• [PATCH 1/3] arm64: add EFI stub   Grant Likely
• [PATCH 1/3] arm64: add EFI stub   Grant Likely
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Grant Likely
• [Linaro-acpi] [PATCH v3 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   Grant Likely
• [Linaro-acpi] [PATCH v3 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   Grant Likely
• [Linaro-acpi] [PATCH v3 2/5] ACPI: bus master reload not supported in reduced HW mode   Grant Likely
• [Linaro-acpi] [PATCH v3 5/5] ACPI: do not map/unmap memory regions for FADT entries in reduced HW mode   Grant Likely
• [RFC part2 PATCH 2/9] ARM64 / ACPI: Prefill cpu possible/present maps and map logical cpu id to APIC id   Grant Likely
• [RFC part2 PATCH 4/9] ARM64 / ACPI: Use Parked Address in GIC structure for spin table SMP initialisation   Grant Likely
• [RFC part2 PATCH 8/9] ACPI / ARM64: Update acpi_register_gsi to register with the core IRQ subsystem   Grant Likely
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Grant Likely
• [Linaro-acpi] [PATCH v3 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   Grant Likely
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Grant Likely
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Grant Likely
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Grant Likely
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Grant Likely
• [PATCHv7 04/12] driver/core: populate devices in order for IOMMUs   Grant Likely
• Support for KGDB/gdb data watchpoints in ARM kernel?   Magnus Lilja
• kernel BUG at kernel/kallsyms.c:222!   Axel Lin
• ARM: nommu: DEBUG_LOCKS_WARN_ON(!depth)   Axel Lin
• [PATCH] ARM: Remove duplicate SCHED_HRTICK config option   Axel Lin
• [PATCH] ARM: Remove duplicate SCHED_HRTICK config option   Axel Lin
• [PATCH 10/10] ARM: tegra: Enable USB on Venice2   Jim Lin
• [PATCH] ARM: multi_v7_defconfig: enable network for BeagleBone Black   Tony Lindgren
• [GIT PULL] more omap dt fixes against v3.13-rc1   Tony Lindgren
• [PATCH 0/5] Get am3517 working with device tree   Tony Lindgren
• [PATCH 1/5] arm/dts: Fix missing entries for am3517   Tony Lindgren
• [PATCH 2/5] ARM: OMAP2+: Fix the machine entry for am3517   Tony Lindgren
• [PATCH 3/5] ARM: OMAP2+: Use pdata quirks for emac on am3517   Tony Lindgren
• [PATCH 4/5] ARM/dts: Add basic devices on am3517-evm   Tony Lindgren
• [PATCH 5/5] ARM: OMAP2+: Remove legacy emac code   Tony Lindgren
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Tony Lindgren
• [PATCH 1/1] gpio: twl4030: Fix regression for twl gpio LED output   Tony Lindgren
• [PATCH 0/3] ARM: OMAP2+: Remove remaining unused legacy code   Tony Lindgren
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Tony Lindgren
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Tony Lindgren
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Tony Lindgren
• [PATCH v2 1/1] gpio: twl4030: Fix regression for twl gpio LED output   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Tony Lindgren
• [PATCH] ARM: DTS: omap4-sdp: Add regulator for LCD backlight (pwm-backlight)   Tony Lindgren
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Tony Lindgren
• [PATCH v2 0/3] ARM: OMAP2+: USB Host bug fixes for 3.13 rc   Tony Lindgren
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Tony Lindgren
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Tony Lindgren
• [GIT PULL] one regression fix and two more omap dt fixes against v3.13-rc2   Tony Lindgren
• [GIT PULL] one regression fix and two more omap dt fixes against v3.13-rc2   Tony Lindgren
• [PATCH] ARM: clean-up common multi-platform kconfig options   Tony Lindgren
• [PATCH] ARM: OMAP2+: Remove unused platform init code and headers   Tony Lindgren
• [GIT PULL] two regression fixes and two more omap dt fixes against v3.13-rc2   Tony Lindgren
• [PATCH v2 5/6] Revert "ARM: OMAP2+: Provide alias to USB PHY clock"   Tony Lindgren
• [PATCH 1/3] ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module   Tony Lindgren
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Tony Lindgren
• OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)   Tony Lindgren
• [PATCH v2 2/2] arm: omap: remove *.auto* from device names given in usb_bind_phy   Tony Lindgren
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Tony Lindgren
• OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)   Tony Lindgren
• OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: hwmod code/data: fixes for v3.13-rc   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [PATCH 1/4] wl1251: split wl251 platform data to a separate structure   Tony Lindgren
• [GIT PULL] wl1251 platform data changes for v3.14   Tony Lindgren
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [GIT PULL] wl1251 platform data changes for v3.14   Tony Lindgren
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Tony Lindgren
• OMAP still fails - usb phy stuff   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [PATCH v3 11/15] mfd: menelaus: Start to use irqdomain   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [GIT PULL] make omap24xx boot in dt mode only, prepare omap3 to drop legacy booting for v3.14   Tony Lindgren
• [GIT PULL] make omap24xx boot in dt mode only, prepare omap3 to drop legacy booting for v3.14   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [PATCH] phy: omap_usb2: fix module dependency   Tony Lindgren
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [PATCH 1/2] net: smc91x: Read hardware behavior flags from device tree   Tony Lindgren
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Tony Lindgren
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Tony Lindgren
• [PATCH v2 0/3] OMAP2+: hwmod: Add support to parse clock info from DT   Tony Lindgren
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Tony Lindgren
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Tony Lindgren
• [PATCH v3 0/2] usb: fix controller-PHY binding for OMAP3 platform   Tony Lindgren
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Tony Lindgren
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Tony Lindgren
• [GIT PULL] omap display regression fix against v3.13-rc4   Tony Lindgren
• OMAP display subsystem - does it work?   Tony Lindgren
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Tony Lindgren
• OMAP display subsystem - does it work?   Tony Lindgren
• [PATCHv11 00/49] ARM: TI SoC clock DT conversion   Tony Lindgren
• OMAP display subsystem - does it work?   Tony Lindgren
• [PATCHv11 07/49] clk: divider: add support for low level ops   Tony Lindgren
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Tony Lindgren
• [PATCH] ARM: dts: Add support for sbc-3xxx with cm-t3730   Tony Lindgren
• [RFT/RFC/PATCH 00/31] arm: omap: irq: cleanup INTC driver   Tony Lindgren
• OMAP display subsystem - does it work?   Tony Lindgren
• OMAP display subsystem - does it work?   Tony Lindgren
• [PATCHv11 07/49] clk: divider: add support for low level ops   Tony Lindgren
• OMAP display subsystem - does it work?   Tony Lindgren
• [PATCHv12 00/49] ARM: TI SoC clock DT conversion   Tony Lindgren
• [RFT/RFC/PATCH 00/31] arm: omap: irq: cleanup INTC driver   Tony Lindgren
• OMAP display subsystem - does it work?   Tony Lindgren
• [GIT PULL] ARM: OMAP2+: hwmod data: a few more fixes for v3.13-rc   Tony Lindgren
• [GIT PULL] few omap regression fixes against v3.13-rc5   Tony Lindgren
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Leif Lindholm
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Leif Lindholm
• [PATCH 1/3] arm64: add EFI stub   Leif Lindholm
• [PATCH v3 2/3] arm: Add [U]EFI runtime services support   Leif Lindholm
• [PATCH 3/3] arm64: add EFI runtime services   Leif Lindholm
• [PATCH 1/1] ARM: dts: Add missing clock names for exynos4412 dwmmc node   Alex Ling
• [PATCH 1/1] ARM: dts: Add missing clock names for exynos4412 dwmmc node   Alex Ling
• [PATCH v2 1/1] ARM: dts: Add missing clocks for exynos4412 dwmmc node   Alex Ling
• [PATCH] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Alex Ling
• [PATCH] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Alex Ling
• [PATCH v2 1/1] ARM: dts: Add missing clocks for exynos4412 dwmmc node   Alex Ling
• [PATCH v2 1/1] ARM: dts: add board dts file for EXYNOS4412 based TINY4412 board   Alex Ling
• [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x   Russell King - ARM Linux
• [PATCH] ARM:INTEGRATOR: Default enable ARM_PATCH_PHYS_VIRT, AUTO_ZRELADDR   Russell King - ARM Linux
• [PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x   Russell King - ARM Linux
• [PATCH] ARM:INTEGRATOR: Default enable ARM_PATCH_PHYS_VIRT, AUTO_ZRELADDR   Russell King - ARM Linux
• [PATCH 1/3] drm: Add LCD display clock polarity flags   Russell King - ARM Linux
• [PATCH 5/6] amba: Convert to clk_prepare_enable and clk_disable_unprepare   Russell King - ARM Linux
• [PATCH 1/3] drm: Add LCD display clock polarity flags   Russell King - ARM Linux
• [PATCHv8] dmaengine: Add support for BCM2835   Russell King - ARM Linux
• Spurious timeouts in mvmdio   Russell King - ARM Linux
• [PATCH] net: mvmdio: fix wait_event_timeout() being called with a 1 jiffy timeout.   Russell King - ARM Linux
• [PATCH V6] kbuild: dtbs_install: new make target   Russell King - ARM Linux
• Spurious timeouts in mvmdio   Russell King - ARM Linux
• Boot time errors/warnings on snowball   Russell King - ARM Linux
• [PATCH] ARM: Clean up setup printks a bit   Russell King - ARM Linux
• ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)   Russell King - ARM Linux
• ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)   Russell King - ARM Linux
• [GIT PULL for-next] ARM: mm: Switch ARM port to NO_BOOTMEM for 3.14   Russell King - ARM Linux
• [PATCH 1/2] ARM: check stack pointer in get_wchan   Russell King - ARM Linux
• [PATCH] serial: rewrite pxa2xx-uart to use 8250_core   Russell King - ARM Linux
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Russell King - ARM Linux
• ARM: gic_arch_extn (Was: [PATCH v3] irqchip: mmp: add dt support for wakeup)   Russell King - ARM Linux
• [PATCH] ARM: asm: add readq/writeq methods   Russell King - ARM Linux
• [PATCH] ARM: clean-up common multi-platform kconfig options   Russell King - ARM Linux
• [PATCH] ARM: clean-up common multi-platform kconfig options   Russell King - ARM Linux
• [REGRESSION,BISECTED] DMA mask issue on ReadyNAS 102 w/ 3.13.0-rc3   Russell King - ARM Linux
• [PATCH RFC] ARM: Provide default restart handler   Russell King - ARM Linux
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Russell King - ARM Linux
• [PATCH] mm: nobootmem: avoid type warning about alignment value   Russell King - ARM Linux
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Russell King - ARM Linux
• OMAP still fails - usb phy stuff   Russell King - ARM Linux
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Russell King - ARM Linux
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Russell King - ARM Linux
• [PATCH v5 1/3] ARM: Introduce atomic MMIO modify   Russell King - ARM Linux
• Build breakage from 'ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions'   Russell King - ARM Linux
• OMAP still fails - usb phy stuff   Russell King - ARM Linux
• [PATCH 1/2] mm/ARM: dma: fix conflicting types for 'arm_dma_zone_size'   Russell King - ARM Linux
• [PATCH] arm64: Correct virt_addr_valid   Russell King - ARM Linux
• [REGRESSION,BISECTED] DMA mask issue on ReadyNAS 102 w/ 3.13.0-rc3   Russell King - ARM Linux
• [PATCH] arm64: Correct virt_addr_valid   Russell King - ARM Linux
• [PATCH v4 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• [REGRESSION,BISECTED] DMA mask issue on ReadyNAS 102 w/ 3.13.0-rc3   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• possible regression on 3.13 when calling flush_dcache_page   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• [PATCH] arm64: Correct virt_addr_valid   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• [PATCH] dma: mv_xor: fix kernel crash on probe error   Russell King - ARM Linux
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Russell King - ARM Linux
• [PATCH] dma: mv_xor: fix kernel crash on probe error   Russell King - ARM Linux
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Russell King - ARM Linux
• arm-soc: Xilinx Zynq dt changes for v3.14   Russell King - ARM Linux
• [PATCH] ARM: reinsert ARCH_MULTI_V4 Kconfig option   Russell King - ARM Linux
• [PATCH] arm64: print cpu frequency in /proc/cpuinfo   Russell King - ARM Linux
• [PATCH 1/5] arm64: Fix __data_loc value   Russell King - ARM Linux
• [PATCH 02/10] arm: select ARCH_MIGHT_HAVE_PC_SERIO   Russell King - ARM Linux
• [BUG] Race in spdif initialisation / ASoC oopses on module removal   Russell King - ARM Linux
• Spurious timeouts in mvmdio   Russell King - ARM Linux
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Russell King - ARM Linux
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Russell King - ARM Linux
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Russell King - ARM Linux
• [PATCH 0/2] Add support for SolidRun's IMX6 board   Russell King - ARM Linux
• [PATCH 2/2] ARM: imx: update imx_v6_v7_defconfig   Russell King - ARM Linux
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Russell King - ARM Linux
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Russell King - ARM Linux
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Russell King - ARM Linux
• OMAP display subsystem - does it work?   Russell King - ARM Linux
• [PATCH V2 2/8] string: fix strncmp function   Russell King - ARM Linux
• [PATCH V2 2/8] string: fix strncmp function   Russell King - ARM Linux
• OMAP display subsystem - does it work?   Russell King - ARM Linux
• [PATCH] thermal: imx_thermal: add module device table   Russell King - ARM Linux
• OMAP display subsystem - does it work?   Russell King - ARM Linux
• OMAP display subsystem - does it work?   Russell King - ARM Linux
• OMAP display subsystem - does it work?   Russell King - ARM Linux
• OMAP display subsystem - does it work?   Russell King - ARM Linux
• [PATCH] mm/ARM: fix ARMs __ffs() to conform to avoid warning with NO_BOOTMEM   Russell King - ARM Linux
• OMAP display subsystem - does it work?   Russell King - ARM Linux
• Christmas break & arm.linux.org.uk   Russell King - ARM Linux
• OMAP display subsystem - does it work?   Russell King - ARM Linux
• Regression (ARM) arch/arm/mm/init.c doesn't build without CONFIG_ARM_PATCH_PHYS_VIRT.   Russell King - ARM Linux
• [ARM] Fix kernel compile error: drivers/crypto/ixp4xx_crypto.c.   Russell King - ARM Linux
• [PATCH] arm64 ptrace.c   Aaron Liu
• [PATCH] arm64 ptrace.c   Aaron Liu
• [PATCH] arm64 ptrace.c   Aaron Liu
• [RFC PATCH v3 04/19] smp, ARM: kill SMP single function call interrupt   Jiang Liu
• [RFC PATCH v3 05/19] smp, ARM64: kill SMP single function call interrupt   Jiang Liu
• [PATCH v6 0/7] Optimize jump label implementation for ARM64   Jiang Liu
• [PATCH v6 1/7] arm64: introduce basic aarch64 instruction decoding helpers   Jiang Liu
• [PATCH v6 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Jiang Liu
• [PATCH v6 3/7] arm64: move encode_insn_immediate() from module.c to insn.c   Jiang Liu
• [PATCH v6 4/7] arm64: introduce aarch64_insn_gen_{nop|branch_imm}() helper functions   Jiang Liu
• [PATCH v6 5/7] arm64, jump label: detect %c support for ARM64   Jiang Liu
• [PATCH v6 6/7] arm64, jump label: optimize jump label implementation   Jiang Liu
• [PATCH v6 7/7] jump_label: use defined macros instead of hard-coding for better readability   Jiang Liu
• [PATCH v6 6/7] arm64, jump label: optimize jump label implementation   Jiang Liu
• [PATCH v6 6/7] arm64, jump label: optimize jump label implementation   Jiang Liu
• [PATCH v6 7/7] jump_label: use defined macros instead of hard-coding for better readability   Jiang Liu
• [PATCH v3 [resend] 04/18] smp, ARM: kill SMP single function call interrupt   Jiang Liu
• [PATCH v3 [resend] 05/18] smp, ARM64: kill SMP single function call interrupt   Jiang Liu
• [PATCH v7 0/7] Optimize jump label implementation for ARM64   Jiang Liu
• [PATCH v7 1/7] arm64: introduce basic aarch64 instruction decoding helpers   Jiang Liu
• [PATCH v7 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Jiang Liu
• [PATCH v7 3/7] arm64: move encode_insn_immediate() from module.c to insn.c   Jiang Liu
• [PATCH v7 4/7] arm64: introduce aarch64_insn_gen_{nop|branch_imm}() helper functions   Jiang Liu
• [PATCH v7 5/7] arm64, jump label: detect %c support for ARM64   Jiang Liu
• [PATCH v7 6/7] arm64, jump label: optimize jump label implementation   Jiang Liu
• [PATCH v7 7/7] jump_label: use defined macros instead of hard-coding for better readability   Jiang Liu
• [Xen-devel] [PATCH] arm64/xen: redefine xen_remap on arm64   Wei Liu
• [PATCH 0/4] ARM: tegra: re-enable EMC scaling function for Tegra20   Joseph Lo
• [PATCH 1/4] ARM: tegra: moving tegra_bct_strapping to tegra-soc.h for global visibility   Joseph Lo
• [PATCH 2/4] clk: tegra: add EMC clock driver   Joseph Lo
• [PATCH 3/4] memory: tegra20-emc: move out Tegra20 EMC driver from mach-tegra   Joseph Lo
• [PATCH 4/4] clk: tegra20: enable EMC clock driver   Joseph Lo
• [PATCH 1/4] ARM: tegra: moving tegra_bct_strapping to tegra-soc.h for global visibility   Joseph Lo
• [PATCH 2/4] clk: tegra: add EMC clock driver   Joseph Lo
• [PATCH 2/4] clk: tegra: add EMC clock driver   Joseph Lo
• [PATCH 2/4] clk: tegra: add EMC clock driver   Joseph Lo
• [PATCH v3 00/15] uprobes: Add uprobes support for ARM   David Long
• [PATCH v3 00/15] uprobes: Add uprobes support for ARM   David Long
• [PATCH v4 00/16] uprobes: Add uprobes support for ARM   David Long
• [PATCH v4 01/16] uprobes: allow ignoring of probe hits   David Long
• [PATCH v4 02/16] ARM: move shared uprobe/kprobe definitions into new include file   David Long
• [PATCH v4 03/16] ARM: Move generic arm instruction parsing code to new files for sharing between features   David Long
• [PATCH v4 04/16] ARM: move generic thumb instruction parsing code to new files for use by other feature   David Long
• [PATCH v4 05/16] ARM: use a function table for determining instruction interpreter actions   David Long
• [PATCH v4 06/16] ARM: Disable jprobes test when built into thumb-mode kernel   David Long
• [PATCH v4 07/16] ARM: Remove use of struct kprobe from generic probes code   David Long
• [PATCH v4 08/16] ARM: Use new opcode type in ARM kprobes/uprobes code   David Long
• [PATCH v4 09/16] ARM: Make the kprobes condition_check symbol names more generic   David Long
• [PATCH v4 10/16] ARM: Change more ARM kprobes symbol names to something more   David Long
• [PATCH v4 11/16] ARM: Rename the shared kprobes/uprobe return value enum   David Long
• [PATCH v4 12/16] ARM: Change the remaining shared kprobes/uprobes symbols to something generic   David Long
• [PATCH v4 13/16] ARM: Add an emulate flag to the kprobes/uprobes instruction decode functions   David Long
• [PATCH v4 14/16] ARM: Make arch_specific_insn a define for new arch_probes_insn structure   David Long
• [PATCH v4 15/16] ARM: add uprobes support   David Long
• [PATCH v4 16/16] ARM: Remove uprobes dependency on kprobes   David Long
• [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH v2 00/10] Kconfig: cleanup SERIO_I8042 dependencies   Luck, Tony
• [PATCH 1/2] ARM: DT: Kirkwood: Use symbolic names from input.h   Andrew Lunn
• [PATCH 2/2] ARM: DT: Kirkwood: Use symbolic names from gpio.h   Andrew Lunn
• [PATCH 1/2] ARM: DT: Kirkwood: Use symbolic names from input.h   Andrew Lunn
• [PATCH 1/2] ARM: DT: Kirkwood: Use symbolic names from input.h   Andrew Lunn
• [PATCH v4 0/4] Dove cpufreq driver   Andrew Lunn
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Andrew Lunn
• [PATCH v4 2/4] mvebu: Dove: Instantiate cpufreq driver.   Andrew Lunn
• [PATCH v4 3/4] mvebu: Dove: Enable cpufreq driver in defconfig   Andrew Lunn
• [PATCH v4 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Andrew Lunn
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Andrew Lunn
• [PATCH v4 2/4] mvebu: Dove: Instantiate cpufreq driver.   Andrew Lunn
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Andrew Lunn
• [PATCH v2 0/2] ARM: DT: Kirkwood: Use symbolic names   Andrew Lunn
• [PATCH v2 1/2] ARM: DT: Kirkwood: Use symbolic names from input.h   Andrew Lunn
• [PATCH v2 2/2] ARM: DT: Kirkwood: Use symbolic names from gpio.h   Andrew Lunn
• [PATCH v2 0/4] PHY driver for Marvell SATA   Andrew Lunn
• [PATCH v2 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy.   Andrew Lunn
• [PATCH v2 2/4] Phy: Add a PHY driver for Marvell MVEBU SATA PHY.   Andrew Lunn
• [PATCH v2 3/4] SATA: MV: Add support for the optional PHYs   Andrew Lunn
• [PATCH v2 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY   Andrew Lunn
• [PATCH v4 2/4] mvebu: Dove: Instantiate cpufreq driver.   Andrew Lunn
• Kernel 3.13-rc - DreamPlug compile failure - PHYS_OFFSET undeclared   Andrew Lunn
• [PATCH] ARM: DT: Dove: Use symbolic names from gpio.h   Andrew Lunn
• [PATCH 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy.   Andrew Lunn
• [PATCH 2/4] Phy: Add a PHY driver for Marvell MVEBU SATA PHY.   Andrew Lunn
• [PATCH 3/4] SATA: MV: Add support for the optional PHYs   Andrew Lunn
• [PATCH 4/4] Phy: Add DT nodes on kirkwood and Dove for the SATA PHY   Andrew Lunn
• [PATCH 1/4] Phy: DT binding documentation for Marvell MVEBU SATA phy.   Andrew Lunn
• [RFC PATCH v5 0/4] Dove Cpufreq driver   Andrew Lunn
• [RFC PATCH v5 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Andrew Lunn
• [RFC PATCH v5 2/4] mvebu: Dove: Indicate the architecture supports cpufreq.   Andrew Lunn
• [RFC PATCH v5 3/4] mvebu: Dove: Enable cpufreq driver in defconfig   Andrew Lunn
• [RFC PATCH v5 4/4] mvebu: Dove: Add PMU node for cpufreq driver   Andrew Lunn
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Andrew Lunn
• [PATCH 3/4] SATA: MV: Add support for the optional PHYs   Andrew Lunn
• [PATCH 3/4] SATA: MV: Add support for the optional PHYs   Andrew Lunn
• [RFC PATCH v5 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Andrew Lunn
• Openblocks AX3-4 i2c bus lockup   Andrew Lunn
• [RFC PATCH v5 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Andrew Lunn
• [PATCH 1/2] ARM: Kirkwood: Add 6192 DTSI file   Andrew Lunn
• [PATCH 2/2] ARM: Kirkwood: DT board setup for LaPlug   Andrew Lunn
• [PATCH 2/2] ARM: Kirkwood: DT board setup for LaPlug   Andrew Lunn
• [PATCH 0/3] ARM: mvebu: minor improvements   Andrew Lunn
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Andrew Lunn
• [PATCH 2/2] ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h   Andrew Lunn
• [PATCH 2/2] ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h   Andrew Lunn
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Andrew Lunn
• [PATCH] ARM: Kirkwood: Add support for Excito Bubba B3   Andrew Lunn
• [PATCH] ARM: Kirkwood: Add support for Excito Bubba B3   Andrew Lunn
• Can't boot newer kernel on Armada 370 dev board   Andrew Lunn
• [PATCH v2] ARM: Kirkwood: Add support for Excito Bubba B3   Andrew Lunn
• Can't boot newer kernel on Armada 370 dev board   Andrew Lunn
• Can't boot newer kernel on Armada 370 dev board   Andrew Lunn
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Andrew Lunn
• Openblocks AX3-4 i2c bus lockup   Andrew Lunn
• [PATCH] ARM: Clean up setup printks a bit   Emilio López
• [linux-sunxi] Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Emilio López
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   Emilio López
• [PATCH v2 00/11] clk: sunxi: PLL4/5/6, mod0 and mbus support   Emilio López
• [PATCH v2 01/11] clk: sunxi: register factors clocks behind composite   Emilio López
• [PATCH v2 02/11] clk: sunxi: add gating support to PLL1   Emilio López
• [PATCH v2 03/11] ARM: sunxi: add PLL4 support   Emilio López
• [PATCH v2 04/11] clk: sunxi: make factors_clk_setup return the clock it registers   Emilio López
• [PATCH v2 05/11] clk: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH v2 06/11] ARM: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH v2 07/11] clk: sunxi: mod0 support   Emilio López
• [PATCH v2 08/11] ARM: sun4i: dt: mod0 clocks   Emilio López
• [PATCH v2 09/11] ARM: sun5i: dt: mod0 clocks   Emilio López
• [PATCH v2 10/11] ARM: sun7i: dt: mod0 clocks   Emilio López
• [PATCH v2 11/11] ARM: sunxi: dt: add nodes for the mbus clock   Emilio López
• [PATCH v2 01/11] clk: sunxi: register factors clocks behind composite   Emilio López
• [PATCH v2 04/11] clk: sunxi: make factors_clk_setup return the clock it registers   Emilio López
• [PATCH v2 08/11] ARM: sun4i: dt: mod0 clocks   Emilio López
• [PATCH v2 05/11] clk: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH v3 00/13] clk: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH v3 01/13] clk: sunxi: register factors clocks behind composite   Emilio López
• [PATCH v3 02/13] clk: sunxi: clean the magic number of mux parents   Emilio López
• [PATCH v3 03/13] clk: sunxi: add gating support to PLL1   Emilio López
• [PATCH v3 04/13] ARM: sunxi: add PLL4 support   Emilio López
• [PATCH v3 05/13] clk: sunxi: make factors_clk_setup return the clock it registers   Emilio López
• [PATCH v3 06/13] clk: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH v3 07/13] ARM: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH v3 08/13] clk: sunxi: mod0 support   Emilio López
• [PATCH v3 09/13] clk: sunxi: support better factor DT nodes   Emilio López
• [PATCH v3 10/13] ARM: sun4i: dt: mod0 clocks   Emilio López
• [PATCH v3 11/13] ARM: sun5i: dt: mod0 clocks   Emilio López
• [PATCH v3 12/13] ARM: sun7i: dt: mod0 clocks   Emilio López
• [PATCH v3 13/13] ARM: sunxi: dt: add nodes for the mbus clock   Emilio López
• [PATCH v3 00/13] clk: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH 1/4] clk: sunxi: Allwinner A20 output clock support   Emilio López
• [PATCH 2/4] ARM: dts: sun7i: external clock outputs   Emilio López
• [PATCH 1/4] clk: sunxi: Allwinner A20 output clock support   Emilio López
• [PATCH 3/4] pinctrl: sunxi: Add Allwinner A20 clock output pin functions   Emilio López
• [PATCH 4/4] ARM: dts: sun7i: Add pin muxing options for clock outputs   Emilio López
• [PATCH 2/4] ARM: dts: sun7i: external clock outputs   Emilio López
• [GIT PULL] Allwinner sunXi clock changes for 3.14   Emilio López
• [PATCH 1/4] clk: sunxi: Allwinner A20 output clock support   Emilio López
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Pavel Machek
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Pavel Machek
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Pavel Machek
• [PATCH] ARM: pxa: Remove unused variables   Daniel Mack
• [PATCH 4/9] ARM: pxa: remove unused variable   Daniel Mack
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Daniel Mack
• [PATCH 4/9] ARM: pxa: remove unused variable   Daniel Mack
• [PATCH 5/9] ARM: dts: provide DMA config to pxamci   Daniel Mack
• [PATCH v5 4/5] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH 08/20] mmc: host: pxamci: switch over to dmaengine use   Daniel Mack
• [PATCH] ARM: pxa: prevent PXA270 occasional reboot freezes   Daniel Mack
• [PATCH 0/8] Impedance matcher for Samsung boards   Daniel Mack
• [PATCH 0/8] Impedance matcher for Samsung boards   Daniel Mack
• [PATCH v5 4/5] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH v6] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH 0/8] Impedance matcher for Samsung boards   Daniel Mack
• [PATCH v2 03/16] ARM: dts: provide DMA config to pxamci   Daniel Mack
• [PATCH V2 2/8] string: fix strncmp function   Daniel Mack
• [PATCH V2 2/8] string: fix strncmp function   Daniel Mack
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Lukasz Majewski
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Lukasz Majewski
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Lukasz Majewski
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Lukasz Majewski
• [PATCH 3/3] cpufreq: exynos: Add exynos5420 cpufreq driver   Lukasz Majewski
• [GIT PULL 7/7] Samsung SoC for v3.14   Lukasz Majewski
• [PATCH] ARM: asm: add readq/writeq methods   Matthias Mann
• [PATCH v2] ARM: asm: add readq/writeq methods   Matthias Mann
• [PATCH v2] ARM: asm: add readq/writeq methods   Matthias Mann
• [PATCH] pci: designware: fix missing msi irqs   Matthias Mann
• [PATCH] pci: designware: fix missing msi irqs   Matthias Mann
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Belisko Marek
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Belisko Marek
• 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL   Belisko Marek
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Belisko Marek
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Belisko Marek
• [PATCH 1/3] arm: omap2: Export devconf1 bypass and acbias.   Belisko Marek
• [PATCH] omap: twl-common: Fix musb-hdrc device name.   Belisko Marek
• [PATCH 0/3] Simplify set_huge_pte_at, pte_same for LPAE   Catalin Marinas
• [PATCH v2] arm64: enable EDAC on arm64   Catalin Marinas
• [PATCH 1/3] arm64: add EFI stub   Catalin Marinas
• [PATCH 3/3] arm64: add EFI runtime services   Catalin Marinas
• [PATCH 1/3] arm64: add EFI stub   Catalin Marinas
• [PATCH v2] arm64: enable EDAC on arm64   Catalin Marinas
• [PATCH 3/3] arm64: add EFI runtime services   Catalin Marinas
• [PATCH 4/4] arm64: add early_ioremap support   Catalin Marinas
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Catalin Marinas
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Catalin Marinas
• [GIT PULL] arm64 fixes for 3.13   Catalin Marinas
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Catalin Marinas
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Catalin Marinas
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Catalin Marinas
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Catalin Marinas
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Catalin Marinas
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Catalin Marinas
• [PATCH 1/6] arm64: Add asm/cpu.h   Catalin Marinas
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Catalin Marinas
• [PATCH 1/6] arm64: Add asm/cpu.h   Catalin Marinas
• [PATCH 5/6] arm64: topology: Tell the scheduler about the relative power of cores   Catalin Marinas
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Catalin Marinas
• ARM64: Domain Equivalent support in ARMv8   Catalin Marinas
• [PATCH 2/3] arm64: topology: Tell the scheduler about the relative power of cores   Catalin Marinas
• [PATCH] arm64: Correct virt_addr_valid   Catalin Marinas
• [PATCH] arm64: Correct virt_addr_valid   Catalin Marinas
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Catalin Marinas
• [PATCH 1/5] arm64: Fix __data_loc value   Catalin Marinas
• [PATCH 4/4] arm64: add early_ioremap support   Catalin Marinas
• [PATCH 1/3] arm64: add EFI stub   Catalin Marinas
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Catalin Marinas
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Catalin Marinas
• [PATCHv2 2/2] arm64: Correct virt_addr_valid   Catalin Marinas
• [PATCH 1/4] arm64: drop redundant macros from read_cpuid()   Catalin Marinas
• [PATCH 2/4] arm64: Add hwcaps for crypto and CRC32 extensions.   Catalin Marinas
• [PATCH 2/4] arm64: Add hwcaps for crypto and CRC32 extensions.   Catalin Marinas
• [PATCH 1/4] arm64: drop redundant macros from read_cpuid()   Catalin Marinas
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [PATCH] arm64: Correct virt_addr_valid   Catalin Marinas
• [PATCH 1/2] ARM64: check stack pointer in get_wchan   Catalin Marinas
• [PATCH v4] arm64: support single-step and breakpoint handler hooks   Catalin Marinas
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [PATCHv2 2/2] arm64: Correct virt_addr_valid   Catalin Marinas
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Catalin Marinas
• [PATCHv4 0/2] CMA for arm64   Catalin Marinas
• [PATCH 4/6] arm64: lib: Implement optimized memcmp routine   Catalin Marinas
• [GIT PULL] arm64 ptrace fix for 3.13   Catalin Marinas
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Catalin Marinas
• [PATCH RFC v3 04/12] arm64: kernel: cpu_{suspend/resume} implementation   Catalin Marinas
• [PATCH v2 1/5] arm64: Remove unused __data_loc variable   Catalin Marinas
• [PATCH] arm64: cmpxchg: update macros to prevent warnings   Catalin Marinas
• [PATCH 2/2] arm64: dts: Reduce size of virtio block device for foundation model   Catalin Marinas
• [PATCH 2/2] arm64: dts: Reduce size of virtio block device for foundation model   Catalin Marinas
• [PATCH 0/4] arm64 topology support   Catalin Marinas
• [PATCH] ARM: mcpm: Make all mcpm functions notrace   Dave Martin
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Dave Martin
• [RFC PATCH] Documentation: devicetree: add description for generic bus properties   Dave Martin
• [PATCH V2] ARM : unwinder : Prevent data abort due to stack overflow while executing unwind instructions Signed-off-by: Anurag Aggarwal <a.anurag at samsung.com>   Dave Martin
• [PATCH V3] ARM : unwinder : Prevent data abort due to stack overflow   Dave Martin
• [PATCH] ARM: mcpm: Make all mcpm functions notrace   Dave Martin
• [PATCH RFC 1/2] Documentation: arm: add cache DT bindings   Dave Martin
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Dave Martin
• [PATCH V4] ARM : unwinder : Prevent data abort due to stack overflow   Dave Martin
• [PATCH] ARM : unwinder : Prevent data abort due to stack overflow   Dave Martin
• [PATCH V4] ARM : unwinder : Prevent data abort due to stack overflow   Dave Martin
• [PATCH] ARM: mcpm: remove redundant dsb instructions prior to sev   Dave Martin
• [PATCH] ARM : unwinder : Prevent data abort due to stack overflow   Dave Martin
• [PATCH V6] ARM : unwinder : Prevent data abort due to stack overflow   Dave Martin
• [PATCH] ARM/KVM: inject data abort on unhandled memory access   Peter Maydell
• [PATCH v2] ARM: asm: add readq/writeq methods   Peter Maydell
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Peter Maydell
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Peter Maydell
• [PATCH] ARM: cpu: Document and tweak clock-frequency property   Peter Maydell
• [PATCH v4] ARM/KVM: save and restore generic timer registers   Peter Maydell
• [PATCH v4] ARM/KVM: save and restore generic timer registers   Peter Maydell
• [PATCH v5 0/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v5 1/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH v5 0/2] watchdog: bcm281xx: Watchdog Driver   Markus Mayer
• [PATCH 0/3] serial: amba-pl011: fix race conditions during initialisation   Jon Medhurst
• [PATCH 1/3] serial: amba-pl011: use port lock to guard control register access   Jon Medhurst
• [PATCH 2/3] serial: amba-pl011: factor out code for writing LCR_H register   Jon Medhurst
• [PATCH 3/3] serial: amba-pl011: preseserve hardware settings during initialisation   Jon Medhurst
• [PATCHv8] dmaengine: Add support for BCM2835   Florian Meier
• [PATCH] ARM: OMAP2+: hwmod: Fix usage of invalid iclk / oclk when clock node is not present   Nishanth Menon
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Nishanth Menon
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Nishanth Menon
• [PATCH] ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected   Nishanth Menon
• [PATCH V2 0/2] ARM: OMAP2+/dts: standardize SoC naming   Nishanth Menon
• [PATCH V2 1/2] Documentation: dt: OMAP: explicitly state SoC compatible strings   Nishanth Menon
• [PATCH V2 2/2] ARM: OMAP2+: board-generic: update SoC compatibility strings   Nishanth Menon
• [PATCH] ARM: dts: Add basic devices for AM3517-craneboard   Nishanth Menon
• [PATCH 0/2] net: smc91x: add DT flags for legacy platforms   Nishanth Menon
• [PATCH 1/2] net: smc91x: Read hardware behavior flags from device tree   Nishanth Menon
• [PATCH 2/2] ARM: dts: omap2430-sdp: add flags for ethernet functionality   Nishanth Menon
• [PATCH 1/2] net: smc91x: Read hardware behavior flags from device tree   Nishanth Menon
• [PATCH] ARM: dts: omap3: split pinctrl for core into two parts   Nishanth Menon
• [PATCH] ARM: dts: omap3: split pinctrl for core into two parts   Nishanth Menon
• [PATCH] ARM: dts: Add basic devices for AM3517-craneboard   Nishanth Menon
• [PATCH] ARM: dts: Add basic devices for AM3517-craneboard   Nishanth Menon
• [PATCHv11 00/49] ARM: TI SoC clock DT conversion   Nishanth Menon
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Antti Miettinen
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Antti Miettinen
• L1 & L2 cache flush sequence on CortexA5 MPcore w.r.t low power modes   Antti Miettinen
• [PATCH 2/2] net: emaclite: add barriers to support Xilinx Zynq platform   David Miller
• [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode   David Miller
• [PATCH 03/10] net: stmmac: Use platform data tied with compatible strings   David Miller
• [PATCH v2 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers   David Miller
• [PATCH v2 2/2] net: emaclite: add barriers to support Xilinx Zynq platform   David Miller
• [PATCH v2] net: allwinner: emac: Add missing free_irq   David Miller
• [PATCH v1 1/6] net: mv643xx_eth: properly start/stop phy device   David Miller
• [PATCH v1 1/6] net: mv643xx_eth: properly start/stop phy device   David Miller
• [PATCH v1 1/6] net: mv643xx_eth: properly start/stop phy device   David Miller
• [PATCH] net: eth: 8390: remove section warning in etherh.c   David Miller
• [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   David Miller
• [PATCH v2 0/5] net: phy: Ethernet PHY powerdown optimization   David Miller
• [PATCH v2] net: mvmdio: fix interrupt timeout handling   David Miller
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Radha Mohan
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Radha Mohan
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Radha Mohan
• [RFC 00/18] Versatile Express config rework   Pawel Moll
• [RFC 05/18] driver core: Do not WARN when devres list is not empty at probe time   Pawel Moll
• [GIT PULL RESEND2] clocksource/clockevents fixes for 3.13   Ingo Molnar
• [GIT PULL RESEND2] clocksource/clockevents fixes for 3.13   Ingo Molnar
• [PATCH v2] use -fstack-protector-strong   Ingo Molnar
• [PATCH v3 2/2] provide -fstack-protector-strong build option   Ingo Molnar
• [PATCH v4 2/2] provide -fstack-protector-strong build option   Ingo Molnar
• [Xen-devel] [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Roger Pau Monné
• [alsa-devel] [PATCH 2/2] ASoC: sh: rcar: Depend on ARCH_SHMOBILE_LEGACY   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sies   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sies   Kuninori Morimoto
• [PATCH] ARM: shmobile: r8a7790 - fix shdi resource sizes   Kuninori Morimoto
• [PATCH 2/6] ARM: shmobile: r7s72100: Add RSPI clocks   Kuninori Morimoto
• [PATCH 09/24] mm/memblock: Add memblock memory allocation apis   Andrew Morton
• [PATCH 00/24] mm: Use memblock interface instead of bootmem   Andrew Morton
• [PATCH v3 02/23] mm/memblock: debug: don't free reserved array if !ARCH_DISCARD_MEMBLOCK   Andrew Morton
• [PATCH v3 08/23] mm/memblock: Add memblock memory allocation apis   Andrew Morton
• [PATCH] mm: nobootmem: avoid type warning about alignment value   Andrew Morton
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Andrew Morton
• [PATCH] rtc: at91sam9: include <mach/hardware.h> explicitly   Andrew Morton
• [PATCHv7] rtc: Add support for Intersil ISL12057 I2C RTC chip   Andrew Morton
• [PATCH] arm: SIGBUS on unsupported ARMv6 unaligned accesses   Robin Murphy
• [PATCH 0/2] kvmtool: Enable overriding Generic Timer frequency   Robin Murphy
• [PATCH 1/2] kvmtool: Support unsigned int options   Robin Murphy
• [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency   Robin Murphy
• [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency   Robin Murphy
• [PATCH 2/2] kvmtool/arm: Add option to override Generic Timer frequency   Robin Murphy
• questions of cpuidle   Preeti U Murthy
• [PATCH] arm: move arm_dma_limit to setup_dma_zone   Vladimir Murzin
• Problem with exception handling - program counter is corrupted   Tal Mussayoff
• [PATCH RFCv2 0/6] net: phy: Ethernet PHY powerdown optimization   Mugunthan V N
• [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs   Mugunthan V N
• [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs   Mugunthan V N
• [RESEND PATCH v7 0/5] clk: clock deregistration support   Sylwester Nawrocki
• [RESEND PATCH v7 1/5] omap3isp: Modify clocks registration to avoid circular references   Sylwester Nawrocki
• [RESEND PATCH v7 2/5] clk: Provide not locked variant of of_clk_get_from_provider()   Sylwester Nawrocki
• [RESEND PATCH v7 3/5] clkdev: Fix race condition in clock lookup from device tree   Sylwester Nawrocki
• [RESEND PATCH v7 4/5] clk: Add common __clk_get(), __clk_put() implementations   Sylwester Nawrocki
• [RESEND PATCH v7 5/5] clk: Implement clk_unregister   Sylwester Nawrocki
• [PATCH] phy: Add exynos-phy driver   Sylwester Nawrocki
• [RESEND PATCH v7 1/5] omap3isp: Modify clocks registration to avoid circular references   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS: Kill exynos_pm_late_initcall()   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS: Kill exynos_pm_late_initcall()   Sylwester Nawrocki
• [RESEND PATCH v7 1/5] omap3isp: Modify clocks registration to avoid circular references   Sylwester Nawrocki
• [PATCH] ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL   Rajendra Nayak
• [PATCH v2 0/3] OMAP2+: hwmod: Add support to parse clock info from DT   Rajendra Nayak
• [PATCH v2 1/3] ARM: OMAP2+: Add support to parse 'main_clk' info from DT   Rajendra Nayak
• [PATCH v2 2/3] ARM: OMAP2+: Add support to parse optional clk info from DT   Rajendra Nayak
• [PATCH v2 3/3] ARM: OMAP4: dts: Add main and optional clock data into DT   Rajendra Nayak
• [PATCHv11 07/49] clk: divider: add support for low level ops   Rajendra Nayak
• [PATCHv11 07/49] clk: divider: add support for low level ops   Rajendra Nayak
• [PATCH V1 07/11] ARM: dts: imx6qdl-sabrelite: add pwms for backlights   Eric Nelson
• [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Eric Nelson
• [PATCH] ARM: dts: imx53: Enable AHCI SATA for imx53-qsb   Robert Nelson
• [PATCH v4 15/16] ARM: add uprobes support   Oleg Nesterov
• [GIT PULL] clk: socfpga: Clock fix for 3.13   Dinh Nguyen
• [PATCH 1/2] arm: socfpga: Add clock for smp_twd timer   Dinh Nguyen
• [GIT PULL] socfpga fix for 3.13   Dinh Nguyen
• [PATCHv3 4/4] arm: dts: Add support for SD/MMC on SOCFPGA   Dinh Nguyen
• [PATCHv3 3/4] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific funcationality   Dinh Nguyen
• [PATCHv4 1/4] arm: dts: Add support for SD/MMC on SOCFPGA   Dinh Nguyen
• [PATCHv5 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings   Dinh Nguyen
• [PATCH] clk: socfpga: Map the clk manager base address in the clock driver   Dinh Nguyen
• [PATCHv4 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings   Dinh Nguyen
• dw_apb_timer compatible string change   Dinh Nguyen
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Dinh Nguyen
• [PATCHv4 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings   Dinh Nguyen
• [PATCH v5 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Dinh Nguyen
• [PATCH v5 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Dinh Nguyen
• [PATCHv6 1/5] mmc: dw_mmc: Add support to set the SDR and DDR timing through clock framework   Dinh Nguyen
• [PATCHv6 1/5] mmc: dw_mmc: Add support to set the SDR and DDR timing through clock framework   Dinh Nguyen
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk"   Dinh Nguyen
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   Dinh Nguyen
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   Dinh Nguyen
• imx6 suspend/resume issue   Bjørn Erik Nilsen
• imx6 suspend/resume issue   Bjørn Erik Nilsen
• imx6 power consumption   Bjørn Erik Nilsen
• imx6 power consumption   Bjørn Erik Nilsen
• imx6 power consumption   Bjørn Erik Nilsen
• [linux-sunxi] Re: [PATCH 2/5] ARM: dts: sun4i: Add support for mmc   Henrik Nordström
• [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core   Sekhar Nori
• [PATCH v4 0/5] Update Davinci watchdog driver   Sekhar Nori
• [GIT PULL] DaVinci fixes for v3.13-rc3   Sekhar Nori
• [GIT PULL] DaVinci fixes for v3.13-rc3   Sekhar Nori
• [PATCH v3] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Sekhar Nori
• [PATCH v6 2/6] This patch converts the davinci gpio driver to use irqdomain support.   Sekhar Nori
• [PATCH v6 3/6] gpio: davinci: remove unused variable intc_irq_num   Sekhar Nori
• [PATCH v6 5/6] ARM: davinci: da850: add GPIO DT node   Sekhar Nori
• [PATCH v6 6/6] ARM: davinci: da850 evm: add GPIO pinumux entries DT node   Sekhar Nori
• [PATCH 0/2] gpio: davinci: reuse for keystone arch   Sekhar Nori
• [PATCH 0/2] gpio: davinci: reuse for keystone arch   Sekhar Nori
• [PATCH v3] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   Sekhar Nori
• [PATCH v2 2/2] gpio: davinci: reuse for Keystone SoC   Sekhar Nori
• [PATCH v2 2/2] gpio: davinci: reuse for Keystone SoC   Sekhar Nori
• [PATCH v2 1/2] gpio: davinci: don't create irq_domain in case of unbanked irqs   Sekhar Nori
• [GIT PULL] DaVinci GPIO updates for v3.14   Sekhar Nori
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [PATCH v3 22/28] mtd: nand: pxa3xx: Introduce multiple page I/O support   Brian Norris
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [PATCH v5 00/14] Armada 370/XP NAND support   Brian Norris
• [PATCH v5 00/14] Armada 370/XP NAND support   Brian Norris
• [PATCH v5 00/14] Armada 370/XP NAND support   Brian Norris
• Merge order in Armada 370/XP (mvebu) NAND support   Brian Norris
• [PATCH] mtd: nand: pxa3xx: Disable "armada370-nand" compatible support   Brian Norris
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Brian Norris
• [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Brian Norris
• [PATCH v3 03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions   Brian Norris
• [PATCH v3 03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions   Brian Norris
• [PATCH v3 04/36] mtd: st_spi_fsm: Supply framework for device requests   Brian Norris
• [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Brian Norris
• [PATCH v3 08/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands   Brian Norris
• [PATCH v3 09/36] mtd: st_spi_fsm: Provide device look-up table   Brian Norris
• [PATCH v3 08/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands   Brian Norris
• [PATCH v3 11/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations   Brian Norris
• [PATCH v3 15/36] mtd: st_spi_fsm: Fetch boot-device from mode pins   Brian Norris
• [PATCH v3 22/36] mtd: st_spi_fsm: Provide the default read/write configurations   Brian Norris
• [PATCH v3 20/36] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode   Brian Norris
• [PATCH v3 26/36] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device   Brian Norris
• [PATCH v3 28/36] mtd: st_spi_fsm: Supply a busy wait for post-write status   Brian Norris
• [PATCH v3 30/36] mtd: st_spi_fsm: Erase partly or as a whole a Serial Flash device   Brian Norris
• [PATCH v3 33/36] mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back   Brian Norris
• [PATCH v3 24/36] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back   Brian Norris
• [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   Brian Norris
• [PATCH] Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"   Brian Norris
• [PATCH 09/15] mtd: sh_flctl: Enable driver compilation with COMPILE_TEST   Brian Norris
• [PATCH v3 9/9] mtd: nand: davinci: don't request AEMIF address range   Brian Norris
• [PATCH v3 7/9] mtd: nand: davinci: adjust DT properties to MTD generic   Brian Norris
• [PATCH v3 1/9] mtd: nand: davinci: fix driver registration   Brian Norris
• [PATCH v3 1/9] mtd: nand: davinci: fix driver registration   Brian Norris
• [PATCH] Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"   Brian Norris
• [PATCH v4 0/9] Reuse davinci-nand driver for Keystone arch   Brian Norris
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Tomasz Nowicki
• [PATCH v2] pinctrl: baytrail: lock IRQs when starting them   Mathias Nyman
• [PATCH] [RESEND] ARM: footbridge: remove obsolete IRQF_DISABLED   Michael Opdenacker
• [PATCH] ARM: SAMSUNG: remove unused SAMSUNG_GPIOLIB_4BIT Kconfig parameter   Michael Opdenacker
• [PATCH][RESEND][ARM] floppy.h: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: cns3xxx: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: IXP4xx: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: LPC32xx: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: misc: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: mmp: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: spear: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: w90x900: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH] arm: plat-orion: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: SAMSUNG: remove IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] clocksource: vt8500: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] [SCSI]: ARM: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: pxa: remove IRQF_DISABLED   Michael Opdenacker
• [GIT PULL][for 3.14] pull request from pxa   Michael Opdenacker
• [PATCH] ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration option   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: AT91: PIT: Remove irq handler when clock event is unused   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Markus Pargmann
• [PATCH v3 0/9] ASoC: fsl-ssi: offline/online configuration and cleanups   Markus Pargmann
• [PATCH v3 1/9] ASoC: fsl-ssi: Fix probe error handling   Markus Pargmann
• [PATCH v3 2/9] ASoC: fsl-ssi: Move sysfs stats to debugfs   Markus Pargmann
• [PATCH v3 3/9] ASoC: fsl-ssi: Add imx51-ssi and of_device_id matching   Markus Pargmann
• [PATCH v3 4/9] ASoC: fsl-ssi: Fix interrupt mapping and release   Markus Pargmann
• [PATCH v3 5/9] ASoC: fsl-ssi: Add offline_config flag   Markus Pargmann
• [PATCH v3 6/9] ASoC: fsl-ssi: Add configuration helper functions   Markus Pargmann
• [PATCH v3 7/9] ASoC: fsl-ssi: Move RX/TX configuration to seperate functions   Markus Pargmann
• [PATCH v3 8/9] ASoC: fsl-ssi: Drop ac97 specific trigger function   Markus Pargmann
• [PATCH v3 9/9] ARM: DTS: imx5* imx6*, use imx51-ssi   Markus Pargmann
• [PATCH v3 9/9] ARM: DTS: imx5* imx6*, use imx51-ssi   Markus Pargmann
• [PATCH 1/2] regulator: tps65910: Add backup battery regulator   Markus Pargmann
• [PATCH 2/2] ARM: dts: tps65910 backup battery regulator   Markus Pargmann
• [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs   Markus Pargmann
• [PATCH 1/6] DT doc: net: cpsw mac-address is optional   Markus Pargmann
• [PATCH 2/6] net: cpsw: header, Add missing include   Markus Pargmann
• [PATCH 3/6] net: cpsw: Add control-module macid driver   Markus Pargmann
• [PATCH 4/6] net: cpsw: Use cpsw-ctrl-macid driver   Markus Pargmann
• [PATCH 5/6] arm: dts: am33xx, Add device node for cpsw-ctrl-macid   Markus Pargmann
• [PATCH 6/6] arm: dts: am335x beagle bone use processor macids   Markus Pargmann
• [PATCH 0/6] net: cpsw: Support for am335x chip MACIDs   Markus Pargmann
• [PATCH 1/2] regulator: tps65910: Add backup battery regulator   Markus Pargmann
• [PATCH 2/2] ARM: dts: tps65910 backup battery regulator   Markus Pargmann
• [PATCH v3 1/9] ASoC: fsl-ssi: Fix probe error handling   Markus Pargmann
• [PATCH v3 5/9] ASoC: fsl-ssi: Add offline_config flag   Markus Pargmann
• [PATCH v3 4/9] ASoC: fsl-ssi: Fix interrupt mapping and release   Markus Pargmann
• [PATCH v2 0/2] regulator: tps65910: backup battery regulator   Markus Pargmann
• [PATCH v2 1/2] regulator: tps65910: Add backup battery regulator   Markus Pargmann
• [PATCH v2 2/2] ARM: dts: tps65910 backup battery regulator   Markus Pargmann
• [PATCH v4 0/9] ASoC: fsl-ssi: offline/online configuration and cleanups   Markus Pargmann
• [PATCH v4 1/9] ASoC: fsl-ssi: Fix probe error handling   Markus Pargmann
• [PATCH v4 2/9] ASoC: fsl-ssi: Move sysfs stats to debugfs   Markus Pargmann
• [PATCH v4 3/9] ASoC: fsl-ssi: Add imx51-ssi and of_device_id matching   Markus Pargmann
• [PATCH v4 4/9] ASoC: fsl-ssi: Fix interrupt stats for imx   Markus Pargmann
• [PATCH v4 5/9] ASoC: fsl-ssi: Add offline_config flag   Markus Pargmann
• [PATCH v4 6/9] ASoC: fsl-ssi: Add configuration helper functions   Markus Pargmann
• [PATCH v4 7/9] ASoC: fsl-ssi: Move RX/TX configuration to seperate functions   Markus Pargmann
• [PATCH v4 8/9] ASoC: fsl-ssi: Drop ac97 specific trigger function   Markus Pargmann
• [PATCH v4 9/9] ARM: DTS: imx5* imx6*, use imx51-ssi   Markus Pargmann
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Anup Patel
• [PATCH 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Anup Patel
• [PATCH 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Anup Patel
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Anup Patel
• [PATCH 1/2] KVM: Add KVM_EXIT_RESET to user space API header   Anup Patel
• [PATCH RESEND] arm64: KVM: Add Kconfig option for max VCPUs per-Guest   Anup Patel
• [PATCH] arm64: KVM: Force undefined exception for Guest SMC intructions   Anup Patel
• [PATCH] KVM: Documentation: Fix typo for KVM_ARM_VCPU_INIT ioctl   Anup Patel
• [PATCH v2 0/2] PSCI system off and reset for KVM ARM/ARM64   Anup Patel
• [PATCH v2 1/2] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Anup Patel
• [PATCH v2 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Anup Patel
• [PATCH v2 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Anup Patel
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Anup Patel
• [PATCH v3 1/2] KVM: Add KVM_EXIT_SYSTEM_EVENT to user space API header   Anup Patel
• [PATCH v3 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Anup Patel
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Anup Patel
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Anup Patel
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Anup Patel
• [PATCH 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH 1/4] Documentation: Add documentation for APM X-Gene SoC Queue Manager/Traffic Manager DTS binding   Ravi Patel
• [PATCH 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH 3/4] arm64: boot: dts: Add DTS entries for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH 4/4] misc: xgene: Add error handling for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH V2 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH V2 1/4] Documentation: Add documentation for APM X-Gene SoC Queue Manager/Traffic Manager DTS binding   Ravi Patel
• [PATCH V2 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH V2 3/4] arm64: boot: dts: Add DTS entries for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH V2 4/4] misc: xgene: Add error handling for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH V2 0/4] misc: xgene: Add support for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH V2 2/4] misc: xgene: Add base driver for APM X-Gene SoC Queue Manager/Traffic Manager   Ravi Patel
• [PATCH 05/10] mfd: menelaus: Use for_each_set_bit()   Joe Perches
• [PATCH v2] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Thomas Petazzoni
• [PATCH 1/4] irqchip: armada-370-xp: fix IPI race condition   Thomas Petazzoni
• [PATCH 1/4] irqchip: armada-370-xp: fix IPI race condition   Thomas Petazzoni
• [PATCH 1/3] reset: Add of_reset_control_get   Thomas Petazzoni
• [PATCH 0/3] ARM: mvebu: minor improvements   Thomas Petazzoni
• [PATCH 1/3] ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h   Thomas Petazzoni
• [PATCH 2/3] ARM: mvebu: fix register length for Armada XP PMSU   Thomas Petazzoni
• [PATCH 3/3] ARM: mvebu: make armada_370_xp_pmsu_init() static   Thomas Petazzoni
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Thomas Petazzoni
• [PATCH 0/2] ARM: mvebu: additional cleanups   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: remove prototypes of non-existing functions from common.h   Thomas Petazzoni
• [PATCH 2/2] ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h   Thomas Petazzoni
• [PATCH 1/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp controller   Thomas Petazzoni
• [PATCH 2/5] input: sun4i-ts: Add support for temperature sensor   Thomas Petazzoni
• [PATCH] ata: sata_mv: setting PHY speed according to SControl speed   Thomas Petazzoni
• [PATCH RFCv1 0/6] ARM: mvebu: coherency support improvements   Thomas Petazzoni
• [PATCH RFCv1 1/6] ARM: mvebu: prepare coherency code to support more SOCs   Thomas Petazzoni
• [PATCH RFCv1 2/6] ARM: mvebu: add a coherency_available() call   Thomas Petazzoni
• [PATCH RFCv1 3/6] bus: mvebu: pass the coherency availability information at init time   Thomas Petazzoni
• [PATCH RFCv1 4/6] ARM: mvebu: use of_find_matching_node_and_match() in coherency.c   Thomas Petazzoni
• [PATCH RFCv1 5/6] ARM: mvebu: update Armada 370/XP DT to use new coherency compatible string   Thomas Petazzoni
• [PATCH RFCv1 6/6] ARM: mvebu: update coherency fabric DT binding documentation   Thomas Petazzoni
• [PATCH 0/2] ARM: mvebu: minor improvements   Thomas Petazzoni
• [PATCH 1/2] ARM: mvebu: remove prototypes of non-existing functions from common.h   Thomas Petazzoni
• [PATCH 2/2] ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h   Thomas Petazzoni
• Issue with the emulated PCI bridge implementation   Thomas Petazzoni
• Issue with the emulated PCI bridge implementation   Thomas Petazzoni
• [PATCH 2/2] ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h   Thomas Petazzoni
• [PATCH 2/2] ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h   Thomas Petazzoni
• [PATCH 0/3] dma: mv_xor: spinlock related improvements   Thomas Petazzoni
• [PATCH 1/3] dma: mv_xor: take channel spinlock in mv_xor_status()   Thomas Petazzoni
• [PATCH 2/3] dma: mv_xor: use __mv_xor_slot_cleanup() in mv_xor_free_chan_resources()   Thomas Petazzoni
• [PATCH 3/3] dma: mv_xor: rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup()   Thomas Petazzoni
• Can't boot newer kernel on Armada 370 dev board   Thomas Petazzoni
• Openblocks AX3-4 i2c bus lockup   Thomas Petazzoni
• [PATCH][STABLE v3.10.x] clockevents: Prefer CPU local devices over global devices   Kim Phillips
• [PATCH RFC 0/2] ARM: defining power states DT bindings   Lorenzo Pieralisi
• [PATCH RFC 1/2] Documentation: arm: add cache DT bindings   Lorenzo Pieralisi
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Lorenzo Pieralisi
• [PATCH RFC 1/2] Documentation: arm: add cache DT bindings   Lorenzo Pieralisi
• [PATCH RFC 1/2] Documentation: arm: add cache DT bindings   Lorenzo Pieralisi
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Lorenzo Pieralisi
• [PATCH RFC 1/2] Documentation: arm: add cache DT bindings   Lorenzo Pieralisi
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Lorenzo Pieralisi
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Lorenzo Pieralisi
• [PATCH] arm: mm: refactor v7 cache cleaning ops to use way/index sequence   Lorenzo Pieralisi
• Request inclusion of ARM v7 cache optimization patch into linux-next   Lorenzo Pieralisi
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Lorenzo Pieralisi
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH RFC 2/2] Documentation: arm: define DT C-states bindings   Lorenzo Pieralisi
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH 2/4] arm64: topology: Add support for topology DT bindings   Lorenzo Pieralisi
• [PATCH 1/4] arm64: topology: Implement basic CPU topology support   Lorenzo Pieralisi
• [PATCH RFC v3 08/12] arm64: kernel: implement HW breakpoints CPU PM notifier   Lorenzo Pieralisi
• [PATCH RFC v3 04/12] arm64: kernel: cpu_{suspend/resume} implementation   Lorenzo Pieralisi
• [PATCH 2/2] ARM: fix framepointer check in unwind_frame   Jean Pihet
• [PATCH 0/3] ARM64: add perf support   Jean Pihet
• [PATCH 1/3] ARM64: perf: add support for perf registers API   Jean Pihet
• [PATCH 2/3] ARM64: perf: wire up perf_regs and unwind support   Jean Pihet
• [PATCH 3/3] ARM64: perf: add support for frame pointer unwinding in compat mode   Jean Pihet
• [PATCH 0/3] ARM64: add perf support   Jean Pihet
• [PATCH v4 0/3] Renesas R-Car Gen2 Common Clock Framework drivers   Laurent Pinchart
• [PATCH v4 1/3] clk: shmobile: Add R-Car Gen2 clocks support   Laurent Pinchart
• [PATCH v4 2/3] clk: shmobile: Add DIV6 clock support   Laurent Pinchart
• [PATCH v4 3/3] clk: shmobile: Add MSTP clock support   Laurent Pinchart
• [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)   Laurent Pinchart
• [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)   Laurent Pinchart
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Laurent Pinchart
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Laurent Pinchart
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Laurent Pinchart
• [GIT PULL FOR v3.14] Renesas R-Car Gen 2 Common Clock Framework   Laurent Pinchart
• pinctrl - detailed gpio-mode pinconf design   Laurent Pinchart
• [PATCH] ARM: shmobile: Genmai SPI over GPIO support   Laurent Pinchart
• [PATCH 1/2] regulator: gpio-regulator: Add required regulator-type property   Laurent Pinchart
• [PATCH 2/2] ARM: shmobile: armadillo: Set vccq_sdhi0 regulator type in DT   Laurent Pinchart
• [PATCH 2/2] ASoC: sh: rcar: Depend on ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [alsa-devel] [PATCH 2/2] ASoC: sh: rcar: Depend on ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [GIT PULL FOR v3.14] Renesas R-Car Gen 2 Common Clock Framework   Laurent Pinchart
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Laurent Pinchart
• [PATCH 01/10] sh-pfc: Turn unsigned indices into unsigned int   Laurent Pinchart
• [PATCH 02/10] sh-pfc: Terminate gpios array by -1   Laurent Pinchart
• [PATCH 03/10] sh-pfc: sh73a0: Add missing IRQ15   Laurent Pinchart
• [PATCH 04/10] sh-pfc: sh73a0: Sort IRQ entries by IRQ number   Laurent Pinchart
• [PATCH 05/10] sh-pfc: Rename sh_pfc window field to windows   Laurent Pinchart
• [PATCH 06/10] sh-pfc: Support GPIO to IRQ mapping specified IRQ resources   Laurent Pinchart
• [PATCH 07/10] ARM: shmobile: r8a73a4: Specify PFC interrupts in DT   Laurent Pinchart
• [PATCH 08/10] ARM: shmobile: r8a7740: Specify PFC interrupts in DT   Laurent Pinchart
• [PATCH 09/10] ARM: shmobile: sh73a0: Specify PFC interrupts in DT   Laurent Pinchart
• [PATCH 10/10] ARM: shmobile: armadillo: dts: Add gpio-keys device   Laurent Pinchart
• [PATCH 08/12] mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 03/15] serial: sh-sci: Restrict non-COMPILE_TEST compilation   Laurent Pinchart
• [PATCH 06/15] v4l: sh_vou: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 01/15] i2c: shmobile/rcar: Restrict non-COMPILE_TEST compilation   Laurent Pinchart
• [PATCH 04/15] iommu: shmobile: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 05/15] DMA: shdma: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 09/15] mtd: sh_flctl: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 10/15] irda: sh_irda: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 11/15] pwm: pwm-renesas-tpu: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 12/15] thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 13/15] fbdev: sh-mobile-lcdcfb: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 15/15] sh: intc: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 07/15] mmc: sdhi: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH v3 0/4] Lager and Koelsch reference serial port support   Laurent Pinchart
• [PATCH v3 1/4] ARM: shmobile: r8a7790: Add serial ports to the device tree   Laurent Pinchart
• [PATCH v3 2/4] ARM: shmobile: r8a7791: Add serial ports to the device tree   Laurent Pinchart
• [PATCH v3 3/4] ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT   Laurent Pinchart
• [PATCH v3 4/4] ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT   Laurent Pinchart
• [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support   Laurent Pinchart
• [PATCH v4 1/5] ARM: shmobile: r8a7790: Add clock index macros for DT sources   Laurent Pinchart
• [PATCH v4 2/5] ARM: shmobile: r8a7791: Add clock index macros for DT sources   Laurent Pinchart
• [PATCH v4 3/5] ARM: shmobile: r8a7790: Add clocks   Laurent Pinchart
• [PATCH v4 4/5] ARM: shmobile: r8a7790: Reference clocks   Laurent Pinchart
• [PATCH v4 5/5] ARM: shmobile: r8a7791: Add clocks   Laurent Pinchart
• [PATCH 07/15] mmc: sdhi: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 07/15] mmc: sdhi: Enable driver compilation with COMPILE_TEST   Laurent Pinchart
• [PATCH 08/12] mmc: sh_mobile_sdhi: Convert to clk_prepare/unprepare   Laurent Pinchart
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Laurent Pinchart
• [PATCH 1/3] pinctrl: at91: correct a few typos   Laurent Pinchart
• [PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show   Laurent Pinchart
• [GIT PULL FOR v3.14] Renesas R-Car Gen 2 Common Clock Framework   Laurent Pinchart
• [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support   Laurent Pinchart
• [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support   Laurent Pinchart
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Laurent Pinchart
• [PATCH 1/5] pinctrl: r7s72100: add riic groups   Laurent Pinchart
• [PATCH 3/5] arm: shmobile: r7s72100: add nodes for i2c controllers to dtsi   Laurent Pinchart
• [PATCH 4/5] arm: shmobile: genmai: adapt dts to use native i2c driver   Laurent Pinchart
• [PATCH 3/5] arm: shmobile: r7s72100: add nodes for i2c controllers to dtsi   Laurent Pinchart
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Laurent Pinchart
• [PATCH RFC 1/2] pinctl: sh-pfc: r7s72100: Ethernet support   Laurent Pinchart
• [PATCH V2 5/5] i2c: riic: add driver   Laurent Pinchart
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Laurent Pinchart
• [PATCH V2 5/5] i2c: riic: add driver   Laurent Pinchart
• [PATCH v2 0/2] ARM: omap3: Split the pinmux core device   Laurent Pinchart
• [PATCH v2 1/2] ARM: dts: Add omap specific pinctrl defines to use padconf addresses   Laurent Pinchart
• [PATCH v2 2/2] ARM: omap3: Split the pinmux core device   Laurent Pinchart
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Laurent Pinchart
• [PATCH 03/15] serial: sh-sci: Restrict non-COMPILE_TEST compilation   Laurent Pinchart
• [PATCH 15/21] ARM: shmobile: Remove Koelsch reference DTS   Laurent Pinchart
• [PATCH 4/6] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Laurent Pinchart
• [PATCH 6/6] [RFC] arm: shmobile: genmai reference: Add RSPI nodes   Laurent Pinchart
• [PATCH 6/6] [RFC] arm: shmobile: genmai reference: Add RSPI nodes   Laurent Pinchart
• [PATCH 15/21] ARM: shmobile: Remove Koelsch reference DTS   Laurent Pinchart
• [PATCH 4/6] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Laurent Pinchart
• [PATCH 4/6] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Laurent Pinchart
• [PATCH] serial: pl011: use port lock to guard control register access   Nicolas Pitre
• [PATCH] clean up cache handling in platform code   Nicolas Pitre
• [PATCH] clean up cache handling in core code   Nicolas Pitre
• [PATCH] ARM: mcpm: remove redundant dsb instructions prior to sev   Nicolas Pitre
• [PATCH] ARM: clean-up common multi-platform kconfig options   Nicolas Pitre
• [PATCH] ARM: clean-up common multi-platform kconfig options   Nicolas Pitre
• [PATCH 0/8] Impedance matcher for Samsung boards   Nicolas Pitre
• [PATCH 5/6] arm64: topology: Tell the scheduler about the relative power of cores   Nicolas Pitre
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Nicolas Pitre
• [PATCH 1/2] ARM: dcache: select DCACHE_WORD_ACCESS for big-endian CPUs   Nicolas Pitre
• [PATCH 2/2] ARM: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS for CPUv6+ && MMU   Nicolas Pitre
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Nicolas Pitre
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Nicolas Pitre
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Nicolas Pitre
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Sourav Poddar
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Sourav Poddar
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Sourav Poddar
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Sourav Poddar
• [PATCH V2 0/4] mtd: spi-nor: add a new framework for SPI NOR   Sourav Poddar
• [PATCH V2 0/4] mtd: spi-nor: add a new framework for SPI NOR   Sourav Poddar
• [PATCH v3 3/7] mtd: spi-nor: add the framework for SPI NOR   Sourav Poddar
• [PATCH v3 3/7] mtd: spi-nor: add the framework for SPI NOR   Sourav Poddar
• [PATCH v4 0/9] USB Device Controller support for BCM281xx   Matt Porter
• [PATCH v4 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v4 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v4 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v4 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string   Matt Porter
• [PATCH v4 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Matt Porter
• [PATCH v4 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v4 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v4 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v4 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v4 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v5 0/9] USB Device Controller support for BCM281xx   Matt Porter
• [PATCH v5 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v5 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v5 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v5 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string   Matt Porter
• [PATCH v5 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Matt Porter
• [PATCH v5 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v5 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v5 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v5 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v5 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v2 1/6] ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs   Matt Porter
• [PATCH v2 4/6] ARM: brcmstb: add misc. DT bindings for brcm,brcmstb   Matt Porter
• [PATCH v2 6/6] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445   Matt Porter
• [PATCH v6 0/9] USB Device Controller support for BCM281xx   Matt Porter
• [PATCH v6 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v6 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v6 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v6 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string   Matt Porter
• [PATCH v6 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Matt Porter
• [PATCH v6 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v6 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v6 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v6 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v3] ARM: bcm: Add DEBUG_LL console support   Matt Porter
• [PATCH v6 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support   Matt Porter
• [PATCH v7 0/9] USB Device Controller support for BCM281xx   Matt Porter
• [PATCH v7 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v7 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v7 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v7 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string   Matt Porter
• [PATCH v7 5/9] usb: gadget: s3c-hsotg: enable generic phy support   Matt Porter
• [PATCH v7 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v7 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v7 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v7 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v7 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v8 0/9] USB Device Controller support for BCM281xx   Matt Porter
• [PATCH v8 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v8 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v8 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string   Matt Porter
• [PATCH v8 5/9] usb: gadget: s3c-hsotg: enable generic phy support   Matt Porter
• [PATCH v8 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v8 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v8 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v8 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v7 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v8 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v9 0/9] USB Device Controller support for BCM281xx   Matt Porter
• [PATCH v9 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls   Matt Porter
• [PATCH v9 2/9] staging: dwc2: update DT binding to add generic clock/phy properties   Matt Porter
• [PATCH v9 3/9] usb: gadget: s3c-hsotg: enable build for other platforms   Matt Porter
• [PATCH v9 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 compatible string   Matt Porter
• [PATCH v9 5/9] usb: gadget: s3c-hsotg: enable generic phy support   Matt Porter
• [PATCH v9 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem   Matt Porter
• [PATCH v9 7/9] phy: add Broadcom Kona USB2 PHY DT binding   Matt Porter
• [PATCH v9 8/9] phy: add Broadcom Kona USB2 PHY driver   Matt Porter
• [PATCH v9 9/9] ARM: dts: add usb udc support to bcm281xx   Matt Porter
• [PATCH v5 1/4] arm64: support single-step and breakpoint handler hooks   Sandeepa Prabhu
• [PATCH RFC v4 1/6] arm64: support single-step and breakpoint handler hooks   Sandeepa Prabhu
• [PATCH v4] ARM64 breakpoint and single step exception hooks   Sandeepa Prabhu
• [PATCH v4] arm64: support single-step and breakpoint handler hooks   Sandeepa Prabhu
• [PATCH v2] ARM: dts: vf610: make pinctrl nodes board specific   Bill Pringlemeir
• [PATCH v2] ARM: dts: vf610: make pinctrl nodes board specific   Bill Pringlemeir
• [PATCH v2] ARM: dts: vf610: make pinctrl nodes board specific   Bill Pringlemeir
• [RFC] pwm: Add Freescale FTM PWM driver support   Bill Pringlemeir
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Bill Pringlemeir
• [PATCH Resend 5/7] clk: vt8500: Staticize vtwm_pll_ops   Tony Prisk
• [PATCH] ARM/KVM: inject data abort on unhandled memory access   Andre Przywara
• [PATCH v4] ARM/KVM: save and restore generic timer registers   Andre Przywara
• [PATCH v4] ARM/KVM: save and restore generic timer registers   Andre Przywara
• [PATCH] ARM/KVM: inject data abort on unhandled memory access   Andre Przywara
• [PATCH v4] ARM/KVM: save and restore generic timer registers   Andre Przywara
• [PATCH v5] ARM/KVM: save and restore generic timer registers   Andre Przywara
• [PATCH] ARM/KVM: inject data abort on unhandled memory access   Andre Przywara
• [PATCH v5] ARM/KVM: save and restore generic timer registers   Andre Przywara
• [PATCH] ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function   Andre Przywara
• [PATCH] ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function   Andre Przywara
• [PATCH] ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)   Roger Quadros
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Roger Quadros
• [PATCH v2 0/3] ARM: OMAP2+: USB Host bug fixes for 3.13 rc   Roger Quadros
• [PATCH 1/3] ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module   Roger Quadros
• [PATCH 2/3] ARM: OMAP2+: hwmod: Fix RESET logic   Roger Quadros
• [PATCH 3/3] ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module   Roger Quadros
• [PATCH 0/1] gpio: twl4030: gpio LED regression fix for 3.13 rc   Roger Quadros
• [PATCH 1/1] gpio: twl4030: Fix regression for twl gpio LED output   Roger Quadros
• 3.13-rc2 phy-twl4030-usb.c - Timeout setting T2 HSUSB PHY DPLL   Roger Quadros
• [PATCH 1/1] gpio: twl4030: Fix regression for twl gpio LED output   Roger Quadros
• [PATCH v2 1/1] gpio: twl4030: Fix regression for twl gpio LED output   Roger Quadros
• [PATCH v2 0/3] ARM: OMAP2+: USB Host bug fixes for 3.13 rc   Roger Quadros
• [PATCH v3 07/10] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework   Roger Quadros
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   Roger Quadros
• [PATCH V4 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [PATCH V4 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [PATCH V5 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [PATCH V5 1/4] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH V5 3/4] ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number   Sricharan R
• [PATCH V5 4/4] ARM: DRA: Enable Crossbar IP support for DRA7XX   Sricharan R
• [PATCH V5 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [PATCH V5 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [PATCH V5 2/4] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [PATCH V5 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [PATCH V5 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [PATCH V4 0/3] ARM: DTS: DRA7: Updates for adding crossbar device   Sricharan R
• [PATCH 2/3] arm64: topology: Tell the scheduler about the relative power of cores   Morten Rasmussen
• [PATCH 5/6] arm64: topology: Tell the scheduler about the relative power of cores   Morten Rasmussen
• [PATCH 2/3] arm64: topology: Tell the scheduler about the relative power of cores   Morten Rasmussen
• [PATCH 5/6] arm64: topology: Tell the scheduler about the relative power of cores   Morten Rasmussen
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Thierry Reding
• [PATCH 04/31] ARM: tegra: update DT files to add reset properties   Thierry Reding
• [PATCH 03/31] ARM: tegra: document use of standard DMA DT bindings   Thierry Reding
• [PATCH 02/31] ARM: tegra: document reset properties in DT bindings   Thierry Reding
• [PATCH v2 1/3] mfd: tps6586x: add version detection   Thierry Reding
• [PATCH v2 2/3] regulator: tps6586x: add and use correct voltage table   Thierry Reding
• [PATCH 1/5] clk: tegra: fix blink clock rate   Thierry Reding
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Thierry Reding
• [PATCH] clk: tegra: Correct clock number for UARTE   Thierry Reding
• [PATCH] OF: base: match each node compatible against all given matches first   Thierry Reding
• [PATCH] clk: tegra: Correct clock number for UARTE   Thierry Reding
• [PATCH 2/3] leds/pwm: Don't disable pwm when setting brightness to 0   Thierry Reding
• [PATCH 1/2] ARM: dts: tegra: Header file for pinctrl constants   Thierry Reding
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Thierry Reding
• [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver   Thierry Reding
• [PATCH V2 1/2] ARM: tegra: Add header file for pinctrl constants   Thierry Reding
• [PATCH V2] dma: tegra: register as an OF DMA controller   Thierry Reding
• [PATCH V2] ARM: tegra: add MMC controllers to Tegra124 DT   Thierry Reding
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Thierry Reding
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Thierry Reding
• [PATCH 02/31] ARM: tegra: document reset properties in DT bindings   Thierry Reding
• [PATCH 03/31] ARM: tegra: document use of standard DMA DT bindings   Thierry Reding
• [PATCH 18/31] ASoC: tegra: allocate AHUB FIFO during probe() not startup()   Thierry Reding
• [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver   Thierry Reding
• [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver   Thierry Reding
• [PATCH v3 1/3] mfd: tps6586x: add version detection   Thierry Reding
• [PATCH v3 2/3] regulator: tps6586x: add and use correct voltage table   Thierry Reding
• [PATCH v2] OF: base: match each node compatible against all given matches first   Thierry Reding
• [PATCH V3] dma: tegra: register as an OF DMA controller   Thierry Reding
• [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table   Thierry Reding
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Thierry Reding
• [PATCH] ARM: pxa: Remove unused variables   Thierry Reding
• [PATCH v2] OF: base: match each node compatible against all given matches first   Thierry Reding
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Thierry Reding
• [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124   Thierry Reding
• [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.   Thierry Reding
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Thierry Reding
• [PATCHv5][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them.   Thierry Reding
• [PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display.   Thierry Reding
• [PATCHv5][ 5/8] staging: imx-drm: parallel display: add regulator support.   Thierry Reding
• [PATCH 1/4] ARM: tegra: add I2C controllers to Tegra124 DT   Thierry Reding
• [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.   Thierry Reding
• [PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display.   Thierry Reding
• [PATCH v5 1/3] mfd: tps6586x: add version detection   Thierry Reding
• [PATCH 2/4] ARM: tegra: enable I2C controllers on Venice2   Thierry Reding
• [PATCH 1/2] ARM: tegra: rebuild tegra_defconfig   Thierry Reding
• [PATCH 2/2] ARM: tegra: enable MAX98090 audio driver in tegra_defconfig   Thierry Reding
• [PATCH] ARM: tegra: add missing break to fuse initialization code   Thierry Reding
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Thierry Reding
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Thierry Reding
• [PATCH 2/3] leds/pwm: Don't disable pwm when setting brightness to 0   Thierry Reding
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Thierry Reding
• [GIT PULL][for 3.14] pull request from pxa   Thierry Reding
• [PATCH 11/15] pwm: pwm-renesas-tpu: Enable driver compilation with COMPILE_TEST   Thierry Reding
• [RFCv2 endianess 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2   Thierry Reding
• [PATCHv7 04/12] driver/core: populate devices in order for IOMMUs   Thierry Reding
• pwm-backlight: 3.13-rc1 regression for old arm machine   Thierry Reding
• [PATCH v9 0/2] PWM: pwm-atmel: add PWM controller driver   Thierry Reding
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [PATCH 00/10] ARM: tegra: DSI and panel support   Thierry Reding
• [PATCH 01/10] ARM: tegra: Enable LVDS on Harmony   Thierry Reding
• [PATCH 02/10] ARM: tegra: Enable LVDS on Cardhu   Thierry Reding
• [PATCH 03/10] ARM: tegra: Add MIPI calibration DT entries for Tegra114   Thierry Reding
• [PATCH 04/10] ARM: tegra: Add host1x, DC and HDMI to Tegra114 device tree   Thierry Reding
• [PATCH 05/10] ARM: tegra: Add Tegra114 DSI support   Thierry Reding
• [PATCH 06/10] ARM: tegra: Add Tegra114 gr2d support   Thierry Reding
• [PATCH 07/10] ARM: tegra: Add Tegra114 gr3d support   Thierry Reding
• [PATCH 08/10] ARM: tegra: Enable DSI support on Dalmore   Thierry Reding
• [PATCH 09/10] ARM: tegra: Enable HDMI support on Dalmore   Thierry Reding
• [PATCH 10/10] ARM: tegra: Enable DRM panel support   Thierry Reding
• [PATCH 00/10] ARM: tegra: Enable a bunch of functionality on Venice2   Thierry Reding
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Thierry Reding
• [PATCH 02/10] ARM: tegra: Hook up SDMMC3 power-supply on Venice2   Thierry Reding
• [PATCH 03/10] ARM: tegra: Add Tegra124 host1x support   Thierry Reding
• [PATCH 04/10] ARM: tegra: Add Tegra124 eDP support   Thierry Reding
• [PATCH 05/10] ARM: tegra: Enable eDP for Venice2   Thierry Reding
• [PATCH 06/10] ARM: tegra: Add SPI controller nodes for Tegra124   Thierry Reding
• [PATCH 07/10] ARM: tegra: Enable Venice2 keyboard   Thierry Reding
• [PATCH 08/10] ARM: tegra: Enable power key on Venice2   Thierry Reding
• [PATCH 09/10] ARM: tegra: Add Tegra124 USB support   Thierry Reding
• [PATCH 10/10] ARM: tegra: Enable USB on Venice2   Thierry Reding
• [PATCH] ARM: pxa: Add dummy backlight power supply on Mitac Mio A701   Thierry Reding
• pwm-backlight: 3.13-rc1 regression for old arm machine   Thierry Reding
• [PATCH] pwm: atmel-pwm: clock can not unprepare after successfully register   Thierry Reding
• [PATCH 05/10] ARM: tegra: Enable eDP for Venice2   Thierry Reding
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Thierry Reding
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Thierry Reding
• [PATCH 06/10] ARM: tegra: Add SPI controller nodes for Tegra124   Thierry Reding
• [PATCH 04/10] ARM: tegra: Add Tegra124 eDP support   Thierry Reding
• [PATCH 10/10] ARM: tegra: Enable USB on Venice2   Thierry Reding
• [PATCH 05/10] ARM: tegra: Add Tegra114 DSI support   Thierry Reding
• [PATCH 03/10] ARM: tegra: Add MIPI calibration DT entries for Tegra114   Thierry Reding
• [PATCHv7 06/12] ARM: tegra: create a DT header defining SWGROUP ID   Thierry Reding
• [PATCH/RFC] ARM: omap3: Split the pinmux core device   Sebastian Reichel
• [PATCHv12 00/49] ARM: TI SoC clock DT conversion   Sebastian Reichel
• [PATCH] mm, show_mem: Remove SHOW_MEM_FILTER_PAGE_COUNT   David Rientjes
• [PATCH] mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter   David Rientjes
• [REPOST PATCH] ARM: sunxi: stop timer from ticking before enabling interrupts   Maxime Ripard
• [RFC PATCH 0/3] DT support for ST micro accelerometers and gyroscopes   Maxime Ripard
• [PATCH RFC 08/10] net: stmmac:sti: Add STi SOC glue driver.   Maxime Ripard
• [PATCH 10/10] ARM: dts: sun7i: Add ethernet alias for GMAC   Maxime Ripard
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Maxime Ripard
• [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware   Maxime Ripard
• [PATCH] net: allwinner: emac: Add missing free_irq   Maxime Ripard
• [PATCH 0/2] ARM: sunxi: Fix interrupt trigger types in the DT   Maxime Ripard
• [PATCH 1/2] ARM: sun7i: dt: Fix interrupt trigger types   Maxime Ripard
• [PATCH 2/2] ARM: sun6i: dt: Fix interrupt trigger types   Maxime Ripard
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Maxime Ripard
• [PATCH] net: allwinner: emac: Add missing free_irq   Maxime Ripard
• [PATCH 0/2] ARM: sunxi: Fix interrupt trigger types in the DT   Maxime Ripard
• [PATCH RESEND 0/2] ARM: sunxi: Fix interrupt trigger types in the DT   Maxime Ripard
• [PATCH RESEND 1/2] ARM: sun7i: dt: Fix interrupt trigger types   Maxime Ripard
• [PATCH RESEND 2/2] ARM: sun6i: dt: Fix interrupt trigger types   Maxime Ripard
• [PATCH v2] net: allwinner: emac: Add missing free_irq   Maxime Ripard
• [PATCH 0/2] ARM: sunxi: Fix interrupt trigger types in the DT   Maxime Ripard
• [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware   Maxime Ripard
• [linux-sunxi] Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Maxime Ripard
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Maxime Ripard
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Maxime Ripard
• [PATCH] dt-bindings: fix example of allwinner interrupt controller   Maxime Ripard
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Maxime Ripard
• [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH 2/5] ARM: dts: sun4i: Add support for mmc   Maxime Ripard
• [PATCH 3/5] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board   Maxime Ripard
• [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [linux-sunxi] Re: [PATCH 2/5] ARM: dts: sun4i: Add support for mmc   Maxime Ripard
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH v3] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board   Maxime Ripard
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Maxime Ripard
• [PATCH 0/2] Add SMP support for the Allwinner A31 SoCs   Maxime Ripard
• [PATCH v3] ARM: sunxi: fix sun5i-a13 port F multiplexing   Maxime Ripard
• [PATCH v2 08/11] ARM: sun4i: dt: mod0 clocks   Maxime Ripard
• Can someone Ack and queue a patch for RTC subsytem?   Maxime Ripard
• [PATCH 0/3] ARM: sunxi: Add A31 High Speed Timer Support   Maxime Ripard
• [PATCH 1/3] reset: Add of_reset_control_get   Maxime Ripard
• [PATCH 2/3] clocksource: sun5i: Add support for reset controller   Maxime Ripard
• [PATCH 3/3] ARM: sun6i: a31: Add support for the High Speed Timers   Maxime Ripard
• [PATCH 1/2] ARM: sun4i: dt: Move the aliases to the DTSI   Maxime Ripard
• [PATCH 2/2] ARM: sun4i: dt: Remove chosen nodes   Maxime Ripard
• [PATCH v4 2/2] ARM: sun4i/sun7i: RTC driver   Maxime Ripard
• [GIT PULL] Allwinner core changes for 3.14   Maxime Ripard
• [GIT PULL] Allwinner DT changes for 3.14   Maxime Ripard
• [GIT PULL] Allwinner drivers for 3.14   Maxime Ripard
• [PATCH 0/4] clk: sunxi: add A20 external output clock support   Maxime Ripard
• [PATCH 1/2] ARM: sun4i: dt: Move the aliases to the DTSI   Maxime Ripard
• [PATCH 2/2] ARM: sun4i: dt: Remove chosen nodes   Maxime Ripard
• [PATCH] MAINTAINERS: Update Allwinner sunXi maintainer files   Maxime Ripard
• [PATCH v2 3/4] pinctrl: sunxi: Add Allwinner A20 clock output pin functions   Maxime Ripard
• [PATCH 0/4] clk: sunxi: add A20 external output clock support   Maxime Ripard
• [PATCH v2 4/4] ARM: dts: sun7i: Add pin muxing options for clock outputs   Maxime Ripard
• [PATCH v2 2/4] ARM: dts: sun7i: external clock outputs   Maxime Ripard
• [PATCH 1/1] ARM: sunxi: select ARM_PSCI   Maxime Ripard
• [PATCH] ARM: sunxi: Select RESET_CONTROLLER   Maxime Ripard
• [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Maxime Ripard
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Guenter Roeck
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Guenter Roeck
• [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core   Guenter Roeck
• [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core   Guenter Roeck
• [PATCH v5 1/5] watchdog: davinci: change driver to use WDT core   Guenter Roeck
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Guenter Roeck
• [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Guenter Roeck
• [PATCH v2 2/2] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Guenter Roeck
• [PATCH v3] watchdog: s3c2410_wdt: Report when the watchdog reset the system   Guenter Roeck
• [PATCH v5] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Guenter Roeck
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Guenter Roeck
• [PATCH v5] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v4 1/2] ARM: mach-moxart: add MOXA ART SoC platform files   Guenter Roeck
• [PATCH v5] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCHv3,RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Guenter Roeck
• [PATCHv3,RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Guenter Roeck
• [PATCHv3,RESEND] rtc: Add support for Intersil ISL12057 I2C RTC chip   Guenter Roeck
• [PATCHv4] rtc: Add support for Intersil ISL12057 I2C RTC chip   Guenter Roeck
• [PATCHv4] rtc: Add support for Intersil ISL12057 I2C RTC chip   Guenter Roeck
• [PATCHv4] rtc: Add support for Intersil ISL12057 I2C RTC chip   Guenter Roeck
• [PATCHv5] rtc: Add support for Intersil ISL12057 I2C RTC chip   Guenter Roeck
• [PATCH v5] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• Can someone Ack and queue a patch for RTC subsytem?   Guenter Roeck
• [RFC 08/18] hwmon: vexpress: Use regmap instead of custom interface   Guenter Roeck
• [lm-sensors] [PATCH 2/5] input: sun4i-ts: Add support for temperature sensor   Guenter Roeck
• [lm-sensors] [PATCH 1/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp controller   Guenter Roeck
• [lm-sensors] [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Guenter Roeck
• [GIT PULL] iommu/arm-smmu: updates for 3.14   Joerg Roedel
• [PATCHv7 05/12] iommu/core: add ops->{bound,unbind}_driver()   Joerg Roedel
• [PATCH v2] OF: base: match each node compatible against all given matches first   Meelis Roos
• [PATCH v2] OF: base: match each node compatible against all given matches first   Meelis Roos
• [PATCH v6 6/7] arm64, jump label: optimize jump label implementation   Steven Rostedt
• [PATCH v6 6/7] arm64, jump label: optimize jump label implementation   Steven Rostedt
• [PATCH v6 7/7] jump_label: use defined macros instead of hard-coding for better readability   Steven Rostedt
• [PATCH v6 7/7] jump_label: use defined macros instead of hard-coding for better readability   Steven Rostedt
• linux-next: manual merge of the renesas tree with the arm-soc tree   Stephen Rothwell
• Could you include clockevents/clocksource tree in linux-next ?   Stephen Rothwell
• [PATCH] ARM: asm: add readq/writeq methods   Måns Rullgård
• [PATCH v2] ARM: asm: add readq/writeq methods   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Måns Rullgård
• kernel BUG at kernel/kallsyms.c:222!   Rusty Russell
• [PATCH v6 02/17] dts: mpc512x: introduce dt-bindings/clock/ header   Mark Rutland
• [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Mark Rutland
• [PATCH 1/1] ARM: dts: Add missing clock names for exynos4412 dwmmc node   Mark Rutland
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Mark Rutland
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Mark Rutland
• [PATCH 1/2] chipidea: ci_hdrc_imx: Allow handling the clock for an USB phy/hub   Mark Rutland
• [PATCH 2/2] ARM: dts: imx6q-udoo: Add USB host support   Mark Rutland
• [PATCH 4/5 v2] input: tc3589x-keypad: support probing from device tree   Mark Rutland
• [RFC] pwm: Add Freescale FTM PWM driver support   Mark Rutland
• [PATCH v5 2/4] AArch64: KGDB: Add Basic KGDB support   Mark Rutland
• [RFC] pwm: Add Freescale FTM PWM driver support   Mark Rutland
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Mark Rutland
• [RFC part3 PATCH 1/2] clocksource / arch_timer: Use ACPI GTDT table to initialize arch timer   Mark Rutland
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Mark Rutland
• [RFC part1 PATCH 2/7] ARM64 : Add dummy asm/cpu.h   Mark Rutland
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Mark Rutland
• [PATCH 1/3] clk: bcm281xx: define kona clock binding   Mark Rutland
• [PATCH 2/3] clk: bcm281xx: add initial clock framework support   Mark Rutland
• [PATCH 3/3] ARM: dts: bcm281xx: define real clocks   Mark Rutland
• [PATCH 2/3] clk: bcm281xx: add initial clock framework support   Mark Rutland
• [PATCH v4 2/4] mvebu: Dove: Instantiate cpufreq driver.   Mark Rutland
• [PATCH v4 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Mark Rutland
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Mark Rutland
• [PATCH v4 4/4] mvebu: Dove: Add clocks and DFS interrupt to cpu node in DT.   Mark Rutland
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Mark Rutland
• [PATCHv3 2/4] arm: dts: Add a system manager compatible property   Mark Rutland
• [PATCHv3 3/4] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific funcationality   Mark Rutland
• [PATCH v4 2/4] mvebu: Dove: Instantiate cpufreq driver.   Mark Rutland
• [PATCH v4 1/4] cpufreq: Add a cpufreq driver for Marvell Dove   Mark Rutland
• [RFCv2 endianess 1/4] pwm: Add Freescale FTM PWM driver support   Mark Rutland
• [GIT PULL] two Integrator devicetree patches   Mark Rutland
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Mark Rutland
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Mark Rutland
• [PATCH 3/6] arm64: dts: Add a devicetree for the ARMv8 4xA53 4xA57 FVP   Mark Rutland
• [PATCH 1/6] arm64: Add asm/cpu.h   Mark Rutland
• [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Philippe Rétornaz
• [PATCH RESEND] mfd: mc13xxx: Remove unneeded mc13xxx_lock/unlock   Philippe Rétornaz
• [PATCH 0/2] Add initial support of PMU and CMU for exynos5260   Vikas Sajjan
• [PATCH 1/2] ARM: EXYNOS: Add initial support of PMU for Exynos5260   Vikas Sajjan
• [PATCH 2/2] ARM: EXYNOS: Add CMU virtual addresses for exynos5260   Vikas Sajjan
• [PATCH 1/2] ARM: EXYNOS: Add initial support of PMU for Exynos5260   Vikas Sajjan
• [PATCH V5 2/6] Add shared update_fdt() function for ARM/ARM64   Mark Salter
• [PATCH 1/3] arm64: add EFI stub   Mark Salter
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Mark Salter
• [PATCH 1/3] arm64: add EFI stub   Mark Salter
• [PATCH 3/3] arm64: add EFI runtime services   Mark Salter
• [PATCH 1/3] arm64: add EFI stub   Mark Salter
• [PATCH 1/3] arm64: add EFI stub   Mark Salter
• [PATCH 3/3] arm64: add EFI runtime services   Mark Salter
• [PATCH 1/3] arm64: add EFI stub   Mark Salter
• [PATCH 4/4] arm64: add early_ioremap support   Mark Salter
• [PATCH 3/3] arm64: add EFI runtime services   Mark Salter
• [PATCH v2 03/11] arm: use generic fixmap.h   Mark Salter
• [PATCH 02/10] arm: select ARCH_MIGHT_HAVE_PC_SERIO   Mark Salter
• [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Mark Salter
• [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Mark Salter
• [PATCH v2 00/10] Kconfig: cleanup SERIO_I8042 dependencies   Mark Salter
• [PATCH v2 02/10] arm: select ARCH_MIGHT_HAVE_PC_SERIO   Mark Salter
• [PATCH v2 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Mark Salter
• [PATCH 4/4] arm64: add early_ioremap support   Mark Salter
• [PATCH] arm64/xen: redefine xen_remap on arm64   Mark Salter
• [PATCH 04/04 v2] ARM: shmobile: Genmai I2C-over-GPIO support   Wolfram Sang
• [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes   Wolfram Sang
• [PATCH 0/5] arm: shmobile: r7s72100: add native i2c support   Wolfram Sang
• [PATCH 1/5] pinctrl: r7s72100: add riic groups   Wolfram Sang
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Wolfram Sang
• [PATCH 3/5] arm: shmobile: r7s72100: add nodes for i2c controllers to dtsi   Wolfram Sang
• [PATCH 4/5] arm: shmobile: genmai: adapt dts to use native i2c driver   Wolfram Sang
• [PATCH 5/5] i2c: riic: add driver   Wolfram Sang
• [PATCH 1/5] pinctrl: r7s72100: add riic groups   Wolfram Sang
• [PATCH 3/5] arm: shmobile: r7s72100: add nodes for i2c controllers to dtsi   Wolfram Sang
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Wolfram Sang
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Wolfram Sang
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Wolfram Sang
• [PATCH V2 0/5] arm: shmobile: r7s72100: add native i2c support   Wolfram Sang
• [PATCH V2 1/5] pinctrl: r7s72100: add riic groups   Wolfram Sang
• [PATCH V2 2/5] arm: shmobile: r7s72100: add i2c clocks   Wolfram Sang
• [PATCH V2 3/5] arm: shmobile: r7s72100: add nodes for i2c controllers to dtsi   Wolfram Sang
• [PATCH V2 4/5] arm: shmobile: genmai: adapt dts to use native i2c driver   Wolfram Sang
• [PATCH V2 5/5] i2c: riic: add driver   Wolfram Sang
• [PATCH] arm: shmobile: clks: remove duplicated clock from r7s72100   Wolfram Sang
• [PATCH V2 1/5] pinctrl: r7s72100: add riic groups   Wolfram Sang
• [PATCH V2 5/5] i2c: riic: add driver   Wolfram Sang
• [PATCH V2 5/5] i2c: riic: add driver   Wolfram Sang
• [PATCH V2 2/5] arm: shmobile: r7s72100: add i2c clocks   Wolfram Sang
• [PATCH V2 3/5] arm: shmobile: r7s72100: add nodes for i2c controllers to dtsi   Wolfram Sang
• [PATCH RFC v2 REPOST 0/8] Beaglebone-Black HDMI audio   Jyri Sarha
• [PATCH RFC v2 REPOST 1/8] clk: add gpio controlled clock   Jyri Sarha
• [PATCH RFC v2 REPOST 2/8] ASoC: davinci-evm: Add named clock reference to DT bindings   Jyri Sarha
• [PATCH RFC v2 REPOST 3/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus   Jyri Sarha
• [PATCH RFC v2 REPOST 4/8] ASoC: hdmi-codec: Add devicetree binding with documentation   Jyri Sarha
• [PATCH RFC v2 REPOST 5/8] ASoC: davinci: HDMI audio build for AM33XX and TDA998x   Jyri Sarha
• [PATCH RFC v2 REPOST 6/8] drm/tilcdc: Add I2C HDMI audio config for tda998x   Jyri Sarha
• [PATCH RFC v2 REPOST 7/8] ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI support   Jyri Sarha
• [PATCH RFC v2 REPOST 8/8] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support   Jyri Sarha
• [alsa-devel] [PATCH RFC v2 REPOST 0/8] Beaglebone-Black HDMI audio   Jyri Sarha
• [PATCH 4/6] arm64: lib: Implement optimized memcmp routine   Deepak Saxena
• Spurious timeouts in mvmdio   Nicolas Schichan
• [PATCH] net: mvmdio: fix wait_event_timeout() being called with a 1 jiffy timeout.   Nicolas Schichan
• Spurious timeouts in mvmdio   Nicolas Schichan
• Spurious timeouts in mvmdio   Nicolas Schichan
• Spurious timeouts in mvmdio   Nicolas Schichan
• Spurious timeouts in mvmdio   Nicolas Schichan
• [PATCH] clk: tegra: Correct clock number for UARTE   Peter De Schrijver
• [PATCH V2] clk: tegra: implement a reset driver   Peter De Schrijver
• [PATCH REPOST 1/2] clk: tegra: remove legacy reset APIs   Peter De Schrijver
• [PATCH REPOST 2/2] clk: tegra: remove bogus PCIE_XCLK   Peter De Schrijver
• [PATCH 2/4] clk: tegra: add EMC clock driver   Peter De Schrijver
• [PATCH 2/4] clk: tegra: add EMC clock driver   Peter De Schrijver
• [PATCH 0/6] efuse driver for Tegra   Peter De Schrijver
• [PATCH 1/6] ARM: tegra: export apb dma readl/writel   Peter De Schrijver
• [PATCH 2/6] misc: fuse: Add efuse driver for Tegra   Peter De Schrijver
• [PATCH 3/6] ARM: tegra: Add efuse bindings   Peter De Schrijver
• [PATCH 4/6] ARM: tegra: rework fuse.c   Peter De Schrijver
• [PATCH 5/6] ARM: Tegra: remove speedo files   Peter De Schrijver
• [PATCH 6/6] misc: enable fuse drivers   Peter De Schrijver
• [PATCH] clk: tegra: Add missing Tegra20 fuse clks   Peter De Schrijver
• [PATCH 2/4] clk: tegra: add EMC clock driver   Peter De Schrijver
• [PATCH Resend 2/7] clk: tegra: Staticize tegra_clk_periph_nodiv_ops   Peter De Schrijver
• pull request for some small fixes   Peter De Schrijver
• [PATCH v2 0/6] efuse driver for Tegra   Peter De Schrijver
• [PATCH v2 1/6] ARM: tegra: export apb dma readl/writel   Peter De Schrijver
• [PATCH v2 2/6] misc: fuse: Add efuse driver for Tegra   Peter De Schrijver
• [PATCH v2 3/6] ARM: tegra: Add efuse bindings   Peter De Schrijver
• [PATCH v2 4/6] ARM: tegra: rework fuse.c   Peter De Schrijver
• [PATCH v2 5/6] ARM: Tegra: remove speedo files   Peter De Schrijver
• [PATCH v2 6/6] misc: enable fuse drivers   Peter De Schrijver
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Matt Sealey
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Matt Sealey
• [PATCH v3 1/3] Documentation: arm: add UEFI support documentation   Matt Sealey
• [RFC PATCH] clk: samsung: add support for multiple clock providers   Rahul Sharma
• [RFC PATCH] clk: samsung: add support for multiple clock providers   Rahul Sharma
• [PATCH 0/7] exynos: add basic support for exynos5260 SoC   Rahul Sharma
• [PATCH 1/7] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH 2/7] pinctrl: exynos: add exynos5260 SoC specific data   Rahul Sharma
• [PATCH 3/7] ARM: dts: add dts files for exynos5260 SoC   Rahul Sharma
• [PATCH 4/7] clk/samsung: add support for multuple clock providers   Rahul Sharma
• [PATCH 5/7] clk/samsung: add support for pll2550xx   Rahul Sharma
• [PATCH 6/7] clk/samsung: add support for pll2650xx   Rahul Sharma
• [PATCH 1/7] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH 2/7] pinctrl: exynos: add exynos5260 SoC specific data   Rahul Sharma
• [PATCH 0/3] exynos5420: clock file cleanup   Rahul Sharma
• [PATCH 1/3] clk/exynos5420: cleanup clock file   Rahul Sharma
• [PATCH 2/3] ARM: dts: replace clock numbers with macros for exynos5420   Rahul Sharma
• [PATCH 3/3] clk/exynos5420: replace enums with macros as clock ids   Rahul Sharma
• [PATCH 1/3] clk/exynos5420: cleanup clock file   Rahul Sharma
• [PATCH 2/3] ARM: dts: replace clock numbers with macros for exynos5420   Rahul Sharma
• [PATCH 1/7] ARM: EXYNOS: initial board support for exynos5260 SoC   Rahul Sharma
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH] arm: at91: sama5d3: enable qt1070 as a wakeup source   Bo Shen
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH] ASoC: wm8731: fix dsp mode configuration   Bo Shen
• [PATCH 0/2] ASoC: sam9x5_wm8731: fix left right channel swap issue   Bo Shen
• [PATCH 1/2] ASoC: atmel_ssc_dai: add dai trigger ops   Bo Shen
• [PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode   Bo Shen
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v8 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v9 0/2] PWM: pwm-atmel: add PWM controller driver   Bo Shen
• [PATCH v9 1/2] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v9 2/2] PWM: atmel-pwm: add device tree binding document   Bo Shen
• [PATCH v9 0/2] PWM: pwm-atmel: add PWM controller driver   Bo Shen
• [PATCH] ASoC: wm8904: fix DSP mode B configuration   Bo Shen
• [RESEND PATCH v2 2/2] ASoC: atmel: sam9x5_wm8731: remove platform_set_drvdata   Bo Shen
• [PATCH] pwm: atmel-pwm: clock can not unprepare after successfully register   Bo Shen
• [PATCH 0/3] ARM: at91: add PWM clock and device node   Bo Shen
• [PATCH 1/3] ARM: at91: add PWM clock   Bo Shen
• [PATCH 2/3] ARM: at91: add PWM device node   Bo Shen
• [PATCH 3/3] arm: at91: at91sam9m10g45ek: switch to PWM leds   Bo Shen
• [PATCH 1/3] dma: mv_xor: take channel spinlock in mv_xor_status()   Shevchenko, Andriy
• [PATCHv8] dmaengine: Add support for BCM2835   Andy Shevchenko
• [PATCH v13] dmaengine: Add MOXA ART DMA engine driver   Andy Shevchenko
• panda board es failed on cpuidle   Alex Shi
• panda board es failed on cpuidle   Alex Shi
• questions of cpuidle   Alex Shi
• questions of cpuidle   Alex Shi
• questions of cpuidle   Alex Shi
• questions of cpuidle   Alex Shi
• questions of cpuidle   Alex Shi
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Alex Shi
• [PATCH 4/6] arm64: topology: Implement basic CPU topology support   Alex Shi
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH V2 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH V2 1/4] mtd: spi-nor: copy the SPI NOR commands to a new header file   Huang Shijie
• [PATCH V2 2/4] mtd: spi-nor: add the basic data structures   Huang Shijie
• [PATCH V2 3/4] mtd: spi-nor: add the framework for SPI NOR   Huang Shijie
• [PATCH] mtd: m25p80: use the SPI nor framework   Huang Shijie
• [PATCH V2 2/4] mtd: spi-nor: add the basic data structures   Huang Shijie
• [PATCH V2 2/4] mtd: spi-nor: add the basic data structures   Huang Shijie
• [PATCH V2 0/4] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH v3 1/7] mtd: spi-nor: copy the SPI NOR commands to a new header file   Huang Shijie
• [PATCH v3 2/7] mtd: spi-nor: add the basic data structures   Huang Shijie
• [PATCH v3 3/7] mtd: spi-nor: add the framework for SPI NOR   Huang Shijie
• [PATCH v3 4/7] mtd: m25p80: use the SPI nor framework   Huang Shijie
• [PATCH v3 5/7] mtd: spi-nor: add a helper to find the spi_device_id   Huang Shijie
• [PATCH v3 6/7] Documentation: add the binding file for Quadspi driver   Huang Shijie
• [PATCH v3 7/7] mtd: spi-nor: Add Freescale QuadSpi driver   Huang Shijie
• [PATCH v3 3/7] mtd: spi-nor: add the framework for SPI NOR   Huang Shijie
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH v3 3/7] mtd: spi-nor: add the framework for SPI NOR   Huang Shijie
• [PATCH v3 0/7] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH v3 2/7] mtd: spi-nor: add the basic data structures   Huang Shijie
• [PATCH v3 1/7] mtd: spi-nor: copy the SPI NOR commands to a new header file   Huang Shijie
• [PATCH v3 7/7] mtd: spi-nor: Add Freescale QuadSpi driver   Huang Shijie
• [PATCH v3 2/7] mtd: spi-nor: add the basic data structures   Huang Shijie
• [PATCH v3 6/7] Documentation: add the binding file for Quadspi driver   Huang Shijie
• [PATCH 0/4] mtd: kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE   Huang Shijie
• [PATCH 1/4] mtd: mxc-nand: kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE   Huang Shijie
• [PATCH 2/4] mtd: denali: kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE   Huang Shijie
• [PATCH 3/4] mtd: nand: kill the the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE for nand_buffers{}   Huang Shijie
• [PATCH 4/4] mtd: nand: remove the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE   Huang Shijie
• [PATCH v4 0/7] mtd: spi-nor: add a new framework for SPI NOR   Huang Shijie
• [PATCH v4 1/7] mtd: spi-nor: copy the SPI NOR commands to a new header file   Huang Shijie
• [PATCH v4 2/7] mtd: spi-nor: add the basic data structures   Huang Shijie
• [PATCH v4 3/7] mtd: spi-nor: add the framework for SPI NOR   Huang Shijie
• [PATCH v4 4/7] mtd: m25p80: use the SPI nor framework   Huang Shijie
• [PATCH v4 5/7] mtd: spi-nor: add a helper to find the spi_device_id   Huang Shijie
• [PATCH v4 6/7] Documentation: add the binding file for Freescale QuadSPI driver   Huang Shijie
• [PATCH v4 7/7] mtd: spi-nor: Add Freescale QuadSPI driver   Huang Shijie
• [PATCH] ARM: dts: vf610: use the interrupt macros   Huang Shijie
• [GIT PULL for-next] ARM: mm: Switch ARM port to NO_BOOTMEM for 3.14   Santosh Shilimkar
• [PATCH 00/24] mm: Use memblock interface instead of bootmem   Santosh Shilimkar
• [PATCH 09/24] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH v2 00/23] mm: Use memblock interface instead of bootmem   Santosh Shilimkar
• [PATCH v2 01/23] mm/memblock: debug: correct displaying of upper memory boundary   Santosh Shilimkar
• [PATCH v2 02/23] mm/memblock: debug: don't free reserved array if !ARCH_DISCARD_MEMBLOCK   Santosh Shilimkar
• [PATCH v2 03/23] mm/bootmem: remove duplicated declaration of __free_pages_bootmem()   Santosh Shilimkar
• [PATCH v2 04/23] mm/memory_hotplug: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH v2 05/23] mm/staging: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH v2 06/23] mm/char: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH v2 07/23] mm/memblock: drop WARN and use SMP_CACHE_BYTES as a default alignment   Santosh Shilimkar
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH v2 09/23] mm/init: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 10/23] mm/printk: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 11/23] mm/page_alloc: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 12/23] mm/power: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 13/23] mm/lib/swiotlb: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 14/23] mm/lib/cpumask: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 15/23] mm/sparse: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 16/23] mm/hugetlb: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 17/23] mm/page_cgroup: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 18/23] mm/percpu: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 19/23] mm/memory_hotplug: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 20/23] mm/firmware: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 21/23] mm/ARM: kernel: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 22/23] mm/ARM: mm: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 23/23] mm/ARM: OMAP: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 00/23] mm: Use memblock interface instead of bootmem   Santosh Shilimkar
• [PATCH v2 06/23] mm/char: remove unnecessary inclusion of bootmem.h   Santosh Shilimkar
• [PATCH v2 02/23] mm/memblock: debug: don't free reserved array if !ARCH_DISCARD_MEMBLOCK   Santosh Shilimkar
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [GIT PULL for-next] ARM: mm: Switch ARM port to NO_BOOTMEM for 3.14   Santosh Shilimkar
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH v2 1/5] usb: dwc3: Add Keystone specific glue layer   Santosh Shilimkar
• [PATCH v2 2/5] usb: phy: Add keystone usb phy driver   Santosh Shilimkar
• [PATCH v2 3/5] ARM: dts: keystone: Add usb phy devicetree bindings   Santosh Shilimkar
• [PATCH v2 0/5] Kesytone II USB support   Santosh Shilimkar
• [PATCH v2 1/5] usb: dwc3: Add Keystone specific glue layer   Shilimkar, Santosh
• [PATCH v5 0/5] Update Davinci watchdog driver   Santosh Shilimkar
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   Santosh Shilimkar
• [PATCH v3 0/9] Reuse davinci-nand driver for Keystone arch   Santosh Shilimkar
• [PATCH v3 00/23] mm: Use memblock interface instead of bootmem   Santosh Shilimkar
• [PATCH v3 01/23] mm/memblock: debug: correct displaying of upper memory boundary   Santosh Shilimkar
• [PATCH v3 02/23] mm/memblock: debug: don't free reserved array if !ARCH_DISCARD_MEMBLOCK   Santosh Shilimkar
• [PATCH v3 03/23] mm/bootmem: remove duplicated declaration of __free_pages_bootmem()   Santosh Shilimkar
• [PATCH v3 04/23] mm/memblock: remove unnecessary inclusions of bootmem.h   Santosh Shilimkar
• [PATCH v3 05/23] mm/memblock: drop WARN and use SMP_CACHE_BYTES as a default alignment   Santosh Shilimkar
• [PATCH v3 06/23] mm/memblock: reorder parameters of memblock_find_in_range_node   Santosh Shilimkar
• [PATCH v3 07/23] mm/memblock: switch to use NUMA_NO_NODE instead of MAX_NUMNODES   Santosh Shilimkar
• [PATCH v3 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH v3 09/23] mm/init: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 10/23] mm/printk: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 11/23] mm/page_alloc: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 12/23] mm/power: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 13/23] mm/lib/swiotlb: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 14/23] mm/lib/cpumask: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 15/23] mm/sparse: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 16/23] mm/hugetlb: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 17/23] mm/page_cgroup: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 18/23] mm/percpu: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 19/23] mm/memory_hotplug: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 20/23] mm/firmware: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 21/23] mm/ARM: kernel: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 22/23] mm/ARM: mm: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 23/23] mm/ARM: OMAP: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v3 01/23] mm/memblock: debug: correct displaying of upper memory boundary   Santosh Shilimkar
• [PATCH] mm: nobootmem: avoid type warning about alignment value   Santosh Shilimkar
• [PATCH] mm: nobootmem: avoid type warning about alignment value   Santosh Shilimkar
• [PATCH v3 1/2] usb: dwc3: Add Keystone specific glue layer   Santosh Shilimkar
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   Santosh Shilimkar
• [PATCH v3 2/2] usb: phy: Add keystone usb phy driver   Santosh Shilimkar
• [PATCH v3 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [GIT PULL] clk: keystone: Couple of misc updates for 3.14   Santosh Shilimkar
• [PATCH 0/2] mm: memblock: Couple of kbuild fixes after the memblock series   Santosh Shilimkar
• [PATCH 1/2] mm/ARM: dma: fix conflicting types for 'arm_dma_zone_size'   Santosh Shilimkar
• [PATCH 2/2] mm/memblock: fix buld of "cris" arch   Santosh Shilimkar
• [RESEND PATCH v2] arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Santosh Shilimkar
• [PATCH v3 1/2] usb: dwc3: Add Keystone specific glue layer   Santosh Shilimkar
• [PATCH v3 1/2] usb: dwc3: Add Keystone specific glue layer   Santosh Shilimkar
• [PATCH v3 0/3] ARM: dts: Keystone II USB nodes   Santosh Shilimkar
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Santosh Shilimkar
• [PATCH v3 13/23] mm/lib/swiotlb: Use memblock apis for early memory allocations   Santosh Shilimkar
• [PATCH v2 1/7] usb: dwc3: keystone: add basic PM support   Santosh Shilimkar
• [PATCH] mm/ARM: fix ARMs __ffs() to conform to avoid warning with NO_BOOTMEM   Santosh Shilimkar
• [PATCH v3 07/23] mm/memblock: switch to use NUMA_NO_NODE instead of MAX_NUMNODES   Santosh Shilimkar
• [PATCH v3 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Santosh Shilimkar
• [PATCH CRITICAL] ARM: s3c64xx: dt: Fix boot failure due to double clock initialization   Santosh Shilimkar
• [PATCH 0/2] gpio: davinci: reuse for keystone arch   Santosh Shilimkar
• [PATCH v3 1/2] memory: ti-aemif: introduce AEMIF driver   Santosh Shilimkar
• [PATCH v3 2/2] memory: ti-aemif: add bindings for AEMIF driver   Santosh Shilimkar
• [PATCH v5 0/5] Update Davinci watchdog driver   Santosh Shilimkar
• [PATCH v3 0/9] Reuse davinci-nand driver for Keystone arch   Santosh Shilimkar
• [PATCH v3 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH 0/2] gpio: davinci: reuse for keystone arch   Santosh Shilimkar
• [PATCH 1/2] gpio: davinci: don't create irq_domain in case of unbanked irqs   Santosh Shilimkar
• [PATCH 2/2] gpio: davinci: reuse for Keystone SoC   Santosh Shilimkar
• [PATCH 0/2] gpio: davinci: reuse for keystone arch   Santosh Shilimkar
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Santosh Shilimkar
• [GIT PULL 1/3] ARM: keystone: device tree updates for 3.14   Santosh Shilimkar
• [GIT PULL 2/3] ARM: keystone: SOC updates for 3.14   Santosh Shilimkar
• [GIT PULL 3/3] ARM: MAINTAINERS: SOC updates for 3.14   Santosh Shilimkar
• [PATCH v2 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Santosh Shilimkar
• [PATCH v2 2/3] clocksource: keystone: add bindings for keystone timer   Santosh Shilimkar
• [PATCH v2 3/3] arm: dts: keystone: add keystone timer entry   Santosh Shilimkar
• [PATCH 0/4] ARM: keystone: enable GPIO support   Santosh Shilimkar
• [GIT PULL 1/3] ARM: keystone: device tree updates for 3.14   Santosh Shilimkar
• [GIT PULL 2/3] ARM: keystone: SOC updates for 3.14   Santosh Shilimkar
• [GIT PULL 3/3] ARM: MAINTAINERS: SOC updates for 3.14   Santosh Shilimkar
• [PATCH v2 0/2] gpio: davinci: reuse for keystone arch   Santosh Shilimkar
• [GIT PULL 1/3] ARM: keystone: device tree updates for 3.14   Santosh Shilimkar
• [PATCH] mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter   Santosh Shilimkar
• [PATCH v3 08/23] mm/memblock: Add memblock memory allocation apis   Santosh Shilimkar
• [PATCH] mm/ARM: fix ARMs __ffs() to conform to avoid warning with NO_BOOTMEM   Santosh Shilimkar
• [PATCH] mm/ARM: fix ARMs __ffs() to conform to avoid warning with NO_BOOTMEM   Santosh Shilimkar
• [PATCH V5 0/4] DRIVERS: IRQCHIP: Add support for crossbar IP   Santosh Shilimkar
• [PATCH v5 0/5] Update Davinci watchdog driver   Santosh Shilimkar
• [PATCH v2] arm: dts: keystone: add gpio device entry   Santosh Shilimkar
• [PATCH v3 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   Santosh Shilimkar
• [PATCH v3 2/3] clocksource: keystone: add bindings for keystone timer   Santosh Shilimkar
• [PATCH v3 3/3] arm: dts: keystone: add keystone timer entry   Santosh Shilimkar
• [PATCH v5 0/5] Update Davinci watchdog driver   Santosh Shilimkar
• [PATCH v3 3/3] arm: dts: keystone: add keystone timer entry   Santosh Shilimkar
• Re: [PATCH RESEND] mfd: mc13xxx: Remove unneeded mc13xxx_lock/unlock   Alexander Shiyan
• Re: [PATCH RESEND] mfd: mc13xxx: Fix null pointer dereference in mc13xxx_common_init   Alexander Shiyan
• Re: [RFC/PATCH] NAND bus-width detection extreme makeover   Alexander Shiyan
• [PATCH 2/3] ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver   Alexander Shiyan
• [PATCH 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• [PATCH 3/3] ARM: clps711x: Migrate CLPS711X subarch to the new irqchip driver   Alexander Shiyan
• [PATCH 0/3] ARM: clps711x: IRQCHIP driver   Alexander Shiyan
• Re: [PATCH 4/4] ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitions   Alexander Shiyan
• Re: [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Alexander Shiyan
• Re: [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Alexander Shiyan
• Re: [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Alexander Shiyan
• Re: [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Alexander Shiyan
• Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.   Alexander Shiyan
• Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.   Alexander Shiyan
• Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.   Alexander Shiyan
• Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.   Alexander Shiyan
• Re: [PATCHv2][ 2/2] ARM: dts: Add support for the cpuimx53 board from Eukrea and its baseboard.   Alexander Shiyan
• Re: [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.   Alexander Shiyan
• Re: [PATCHv7][ 2/2] video: backlight: gpio-backlight: Add DT support.   Alexander Shiyan
• [PATCH 0/3] ARM: clps711x: IRQCHIP driver   Alexander Shiyan
• [PATCH 1/5] ARM: dts: i.MX: Move include "imxXX-pinfunc.h" into "imxXX-pingrp.h"   Alexander Shiyan
• [PATCH 2/5] ARM: dts: imx27-phytec-phycore-rdk: Change pinctrl settings for I2C1   Alexander Shiyan
• [PATCH 3/5] ARM: dts: imx27-phytec-phycore-som: trivial: Typo fix   Alexander Shiyan
• [PATCH 4/5] ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on module   Alexander Shiyan
• [PATCH 5/5] ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsi   Alexander Shiyan
• Re: [PATCH 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• Re: [PATCH] ARM: asm: add readq/writeq methods   Alexander Shiyan
• Re: [PATCH 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• [PATCH RFC] ARM: Provide default restart handler   Alexander Shiyan
• [PATCH 0/2] serial: clps711x: UART driver refactor   Alexander Shiyan
• [PATCH 1/2] serial: clps711x: Driver refactor   Alexander Shiyan
• [PATCH 2/2] serial: clps711x: dts: Add bindings documentation for the CLPS711X UART   Alexander Shiyan
• [PATCH 1/3] can: mcp251x: Convert driver to use common clk framework   Alexander Shiyan
• [PATCH 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• Re: [PATCH 1/3] can: mcp251x: Convert driver to use common clk framework   Alexander Shiyan
• [PATCH 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• [PATCH v2 0/3] ARM: clps711x: IRQCHIP driver   Alexander Shiyan
• [PATCH v2 2/3] ARM: dts: clps711x: Add bindings documentation for CLPS711X irqchip driver   Alexander Shiyan
• [PATCH v2 1/3] ARM: clps711x: Add CLPS711X irqchip driver   Alexander Shiyan
• [PATCH v2 3/3] ARM: clps711x: Migrate CLPS711X subarch to the new irqchip driver   Alexander Shiyan
• Re: [PATCH] MAINTAINERS: take maintainership for Energy Micro efm32 SoCs   Alexander Shiyan
• [PATCH 1/6] ARM: dts: imx27-phytec-phycore-som: Add NFC pin group   Alexander Shiyan
• [PATCH 2/6] ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module   Alexander Shiyan
• [PATCH 3/6] ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMIC   Alexander Shiyan
• [PATCH 4/6] ARM: dts: i.MX27: Add missing pullup settings for SDHC pin groups   Alexander Shiyan
• [PATCH 5/6] ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHC   Alexander Shiyan
• [PATCH 6/6] ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIM   Alexander Shiyan
• [PATCH] ARM: i.MX: Remove IMX_HAVE_PLATFORM_IMX_FB symbol   Alexander Shiyan
• [PATCH] video: imxfb: Use regulator API with LCD class for powering   Alexander Shiyan
• Re: [PATCH] video: imxfb: Use regulator API with LCD class for powering   Alexander Shiyan
• Re: [PATCH] ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support   Alexander Shiyan
• Re: [PATCH] ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support   Alexander Shiyan
• [PATCH v2 0/3] ARM: clps711x: IRQCHIP driver   Alexander Shiyan
• [PATCH] ARM: i.MX51: Fix IOMUX settings   Alexander Shiyan
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   Sergei Shtylyov
• [PATCH RFCv2 5/6] net: phy: suspend unused PHYs on mdio_bus in late_initcall   Sergei Shtylyov
• [PATCH] ARM: shmobile: Genmai SPI over GPIO support   Sergei Shtylyov
• [PATCH v3 1/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_request_and_ioremap   Sergei Shtylyov
• [PATCH] net: allwinner: emac: Add missing free_irq   Sergei Shtylyov
• [PATCH] sh_eth: add R8A7791 support   Sergei Shtylyov
• [PATCH v4 1/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_ioremap_resource   Sergei Shtylyov
• [PATCH v3 0/3] Add Ether support for R8A7791/Koelsch board   Sergei Shtylyov
• [PATCH v3 1/3] ARM: shmobile: r8a7791: add Ether clock   Sergei Shtylyov
• [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• [PATCH v3 3/3] ARM: shmobile: Koelsch: enable Ether in defconfig   Sergei Shtylyov
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Sergei Shtylyov
• [PATCH v5 15/15] usb: phy-mxs: Add sync time after controller clear phcd   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• [PATCH] ARM: rcar-gen2: Do not setup timer in non-secure mode   Sergei Shtylyov
• [PATCH] ARM: rcar-gen2: Do not attempt to re-setup timer if running correctly   Sergei Shtylyov
• [PATCH] ARM: rcar-gen2: Do not attempt to re-setup timer if running correctly   Sergei Shtylyov
• [PATCH 07/15] mmc: sdhi: Enable driver compilation with COMPILE_TEST   Sergei Shtylyov
• [PATCH 07/15] mmc: sdhi: Enable driver compilation with COMPILE_TEST   Sergei Shtylyov
• [PATCH] irq-gic: remove file name from heading comment   Sergei Shtylyov
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Sergei Shtylyov
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Sergei Shtylyov
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Sergei Shtylyov
• [PATCH 4/5] arm: shmobile: genmai: adapt dts to use native i2c driver   Sergei Shtylyov
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Sergei Shtylyov
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Sergei Shtylyov
• [PATCH 2/5] arm: shmobile: r7s72100: add i2c clocks   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: Koelsch: add Ether support   Sergei Shtylyov
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Sergei Shtylyov
• [PATCH 0/2] Add Ether's PHY IRQ support for R8A7790/Lager board   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: Lager: pass Ether PHY IRQ   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: Lager: conditionally select CONFIG_MICREL_PHY   Sergei Shtylyov
• [PATCH 0/1] Add Ether's PHY IRQ support for R8A7791/Koelsch board   Sergei Shtylyov
• [PATCH 1/1] ARM: shmobile: Koelsch: pass Ether PHY IRQ   Sergei Shtylyov
• [PATCH 2/3] ARM: shmobile: kzm9g: add FSI support for DTS   Sergei Shtylyov
• [PATCH 2/3] ARM: shmobile: kzm9g: add FSI support for DTS   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: Lager: conditionally select CONFIG_MICREL_PHY   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: Lager: conditionally select CONFIG_MICREL_PHY   Sergei Shtylyov
• [PATCH 3/6] ARM: shmobile: r7s72100: Add RSPI resources   Sergei Shtylyov
• [PATCH 6/6] [RFC] arm: shmobile: genmai reference: Add RSPI nodes   Sergei Shtylyov
• [PATCH 15/21] ARM: shmobile: Remove Koelsch reference DTS   Sergei Shtylyov
• [PATCH 1/1] ARM: shmobile: Koelsch: pass Ether PHY IRQ   Sergei Shtylyov
• dw_apb_timer compatible string change   Baruch Siach
• [PATCH 6/6] clocksource: dw_apb_timer_of: Fix support for dts binding "snps, dw-apb-timer"   Baruch Siach
• [PATCH] dt-bindings: fix example of allwinner interrupt controller   Baruch Siach
• [PATCH 2/3] thermal: imx: add necessary clk operation   Baruch Siach
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Siarhei Siamashka
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Siarhei Siamashka
• [PATCH 0/4] arm64: advertise availability of CRC and crypto instructions   Siarhei Siamashka
• ARM: Convert boot_lock to raw_lock   Sebastian Andrzej Siewior
• [PATCH 1/8] ARM: Convert boot_lock to raw_lock [exynos]   Sebastian Andrzej Siewior
• [PATCH 2/8] ARM: Convert boot_lock to raw_lock [msm]   Sebastian Andrzej Siewior
• [PATCH 3/8] ARM: Convert boot_lock to raw_lock [omap]   Sebastian Andrzej Siewior
• [PATCH 4/8] ARM: Convert boot_lock to raw_lock [prima2]   Sebastian Andrzej Siewior
• [PATCH 5/8] ARM: Convert boot_lock to raw_lock [spear]   Sebastian Andrzej Siewior
• [PATCH 6/8] ARM: Convert boot_lock to raw_lock [sti]   Sebastian Andrzej Siewior
• [PATCH 7/8] ARM: Convert boot_lock to raw_lock [ux500]   Sebastian Andrzej Siewior
• [PATCH 8/8] ARM: Convert boot_lock to raw_lock [versatile]   Sebastian Andrzej Siewior
• ARM: AT91: remove unused pit irq hander and allow higher clockrates for TCLIB   Sebastian Andrzej Siewior
• [PATCH 1/2] ARM: AT91: PIT: Remove irq handler when clock event is unused   Sebastian Andrzej Siewior
• [PATCH 2/2] clocksource: TCLIB: Allow higher clock rates for clock events   Sebastian Andrzej Siewior
• [PATCH 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers   Michal Simek
• [PATCH v3 1/2] mmc: arasan: Add driver for Arasan SDHCI   Michal Simek
• [PATCH v3 2/2] arm: dt: zynq: Add SDHCI nodes   Michal Simek
• [PATCH] ARM: clean-up common multi-platform kconfig options   Michal Simek
• [PATCH] ARM: zynq: add gem support   Michal Simek
• [PATCH v2 1/9] arm: dt: zynq: Remove 'clock-ranges' from TTC nodes   Michal Simek
• [PATCH v2 1/9] arm: dt: zynq: Remove 'clock-ranges' from TTC nodes   Michal Simek
• arm-soc: Xilinx Zynq cleanups for v3.14   Michal Simek
• arm-soc: Xilinx Zynq dt changes for v3.14   Michal Simek
• arm-soc: Xilinx Zynq dt changes for v3.14   Michal Simek
• arm-soc: Xilinx Zynq dt changes for v3.14   Michal Simek
• [GIT PULL] Xilinx Zynq clk changes for v3.14   Michal Simek
• [GIT PULL] Xilinx Zynq clk changes for v3.14   Michal Simek
• [PATCH] MAINTAINERS: Setup proper record for Xilinx Zynq   Michal Simek
• [GIT PULL] Xilinx Zynq clk changes for v3.14   Michal Simek
• [GIT PULL v2] Xilinx Zynq clk changes for v3.14   Michal Simek
• [PATCH v6 02/17] dts: mpc512x: introduce dt-bindings/clock/ header   Gerhard Sittig
• [PATCH v6 08/17] spi: mpc512x: adjust to OF based clock lookup   Gerhard Sittig
• [PATCH v2] pinctrl: baytrail: lock IRQs when starting them   Gerhard Sittig
• [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Gerhard Sittig
• [PATCH v1 1/4] powerpc/512x: clk: minor comment updates   Gerhard Sittig
• [PATCH v1 2/4] powerpc/512x: clk: enforce even SDHC divider values   Gerhard Sittig
• [PATCH v1 3/4] powerpc/512x: clk: support MPC5121/5123/5125 SoC variants   Gerhard Sittig
• [PATCH v1 4/4] powerpc/512x: dts: add MPC5125 clock specs   Gerhard Sittig
• [PATCH v6 00/17] add COMMON_CLK support for PowerPC MPC512x   Gerhard Sittig
• [PATCH v3 6/7] Documentation: add the binding file for Quadspi driver   Gerhard Sittig
• [PATCH v3 6/7] Documentation: add the binding file for Quadspi driver   Gerhard Sittig
• [PATCH v3 04/12] clk: Add regmap core helpers for enable/disable/is_enabled   Gerhard Sittig
• [PATCH] clk: remove CONFIG_COMMON_CLK_DEBUG   Gerhard Sittig
• [PATCHv12 06/49] clk: add support for low level register ops   Gerhard Sittig
• [PATCHv12 07/49] clk: divider: add support for low level ops   Gerhard Sittig
• [PATCH v3 04/12] clk: Add regmap core helpers for enable/disable/is_enabled   Gerhard Sittig
• [PATCH v4 03/15] clk: Add regmap core helpers for enable/disable/is_enabled   Gerhard Sittig
• [PATCH] clk: support hardware-specific debugfs entries   Gerhard Sittig
• [PATCH v4 03/15] clk: Add regmap core helpers for enable/disable/is_enabled   Gerhard Sittig
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Gerhard Sittig
• [ARM] Fix kernel compile error: drivers/crypto/ixp4xx_crypto.c.   Gerhard Sittig
• [PATCH] irqchip: sirf: set IRQ_LEVEL status_flags   Barry Song
• [PATCH] dmaengine: sirf: Add device_slave_caps interface   Barry Song
• [PATCH 1/2] mmc: sdhci: combined dma buffer support for sdma   Barry Song
• [PATCH 2/2] mmc: sirf: enable combined dma buffer   Barry Song
• [PATCH] mmc: sdhci: use time_after to replace mdelay-loop for timeout   Barry Song
• [PATCH] MAINTAINERS: ARM: SiRF: add sirf UART and watchdog to maintain list   Barry Song
• [PATCH] MAINTAINERS: ARM: SiRF: add sirf UART and watchdog to maintain list   Barry Song
• [PATCH] Slightly outdated CONFIG_SMP documentation fix   Psychedelic Squid
• [PATCH] xen/arm64: do not call the swiotlb functions twice   Stefano Stabellini
• [PATCH] clk: tegra: Correct clock number for UARTE   Lucas Stach
• [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings   Lucas Stach
• [PATCHv5][ 2/8] staging: imx-drm: Add RGB666 support for parallel display.   Lucas Stach
• [PATCH] ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition   Lucas Stach
• [PATCH 2/4] clk: tegra: add EMC clock driver   Lucas Stach
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   Alan Stern
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   Alan Stern
• [PATCH 0/5] PM: Enable option of re-use runtime PM callbacks at system suspend   Alan Stern
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Al Stone
• [Linaro-acpi] [PATCH v3 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   Al Stone
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Grygorii Strashko
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Grygorii Strashko
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Strashko, Grygorii
• [PATCH v2 08/23] mm/memblock: Add memblock memory allocation apis   Grygorii Strashko
• [PATCH v3 02/23] mm/memblock: debug: don't free reserved array if !ARCH_DISCARD_MEMBLOCK   Grygorii Strashko
• [PATCH 0/2] gpio: davinci: reuse for keystone arch   Grygorii Strashko
• [PATCH 1/2] gpio: davinci: don't create irq_domain in case of unbanked irqs   Grygorii Strashko
• [PATCH 2/2] gpio: davinci: reuse for Keystone SoC   Grygorii Strashko
• [PATCH 0/2] gpio: davinci: reuse for keystone arch   Grygorii Strashko
• [PATCH 2/2] gpio: davinci: reuse for Keystone SoC   Grygorii Strashko
• [PATCH 0/4] ARM: keystone: enable GPIO support   Grygorii Strashko
• [PATCH 1/4] arm: dts: keystone: add GPIO device entry   Grygorii Strashko
• [PATCH 2/4] ARM: keystone_defconfig: enable gpio support   Grygorii Strashko
• [PATCH 3/4] arm: dts: keystone-evm: add LEDs supports   Grygorii Strashko
• [PATCH 4/4] ARM: keystone_defconfig: enable LED support   Grygorii Strashko
• [PATCH 2/2] gpio: davinci: reuse for Keystone SoC   Grygorii Strashko
• [PATCH v2 0/2] gpio: davinci: reuse for keystone arch   Grygorii Strashko
• [PATCH v2 1/2] gpio: davinci: don't create irq_domain in case of unbanked irqs   Grygorii Strashko
• [PATCH v2 2/2] gpio: davinci: reuse for Keystone SoC   Grygorii Strashko
• [PATCH v2 1/2] gpio: davinci: don't create irq_domain in case of unbanked irqs   Grygorii Strashko
• [PATCH v2 2/2] gpio: davinci: reuse for Keystone SoC   Grygorii Strashko
• [PATCH v3 0/2] gpio: davinci: reuse for keystone arch   Grygorii Strashko
• [PATCH v3 1/2] gpio: davinci: don't create irq_domain in case of unbanked irqs   Grygorii Strashko
• [PATCH v3 2/2] gpio: davinci: reuse for Keystone SoC   Grygorii Strashko
• [PATCH v2] arm: dts: keystone: add gpio device entry   Grygorii Strashko
• [PATCH v3 2/2] gpio: davinci: reuse for Keystone SoC   Grygorii Strashko
• [PATCH v3 2/2] gpio: davinci: reuse for Keystone SoC   Grygorii Strashko
• [PATCH] mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter   Grygorii Strashko
• [RFC 02/18] power/reset: vexpress: Use sched_clock as the time source   John Stultz
• [PATCH v3 0/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Heiko Stübner
• [PATCH v3 1/5] clk: samsung: add pll_6552 variant for s3c2416   Heiko Stübner
• [PATCH v3 2/5] clk: samsung: add plls used by the s3c2443   Heiko Stübner
• [PATCH v3 3/5] dt-bindings: add binding for clock-controller of s3c2443 and following   Heiko Stübner
• [PATCH v3 4/5] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450   Heiko Stübner
• [PATCH v3 5/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Heiko Stübner
• [PATCH v3 5/5] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Heiko Stübner
• [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Heiko Stübner
• [PATCH v4 1/7] clk: samsung: add pll_6552 variant for s3c2416   Heiko Stübner
• [PATCH v4 2/7] clk: samsung: add plls used by the s3c2443   Heiko Stübner
• [PATCH v4 3/7] dt-bindings: add binding for clock-controller of s3c2443 and following   Heiko Stübner
• [PATCH v4 4/7] clk: samsung: add clock-driver for s3c2416, s3c2443 and s3c2450   Heiko Stübner
• [PATCH v4 5/7] ARM: S3C24XX: prevent conflicts between ccf and non-ccf s3c24xx-socs   Heiko Stübner
• [PATCH v4 6/7] ARM: dt: add clock data for s3c2416   Heiko Stübner
• [PATCH v4 7/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Heiko Stübner
• [PATCH 2/2] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   Heiko Stübner
• [PATCH 1/2] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Heiko Stübner
• [PATCH 1/2] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Heiko Stübner
• [PATCH 00/12] ARM: S3C24XX: convert s3c2410, s3c2440 s3c2442 to common clock framework   Heiko Stübner
• [PATCH 01/12] ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf   Heiko Stübner
• [PATCH 02/12] dt-bindings: document s3c24xx controller for external clock output   Heiko Stübner
• [PATCH 03/12] clk: samsung: add clock driver for external clock outputs   Heiko Stübner
• [PATCH 04/12] ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled   Heiko Stübner
• [PATCH 05/12] ARM: S3C24XX: only store clock registers when old clock code is active   Heiko Stübner
• [PATCH 06/12] clk: samsung: add plls used by the early s3c24xx cpus   Heiko Stübner
• [PATCH 07/12] dt-bindings: add documentation for s3c2410 clock controller   Heiko Stübner
• [PATCH 08/12] clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442   Heiko Stübner
• [PATCH 09/12] ARM: S3C24XX: add platform code for conversion to the common clock framework   Heiko Stübner
• [PATCH 10/12] ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework   Heiko Stübner
• [PATCH 11/12] ARM: S3C24XX: convert s3c2410 to common clock framework   Heiko Stübner
• [PATCH 12/12] ARM: S3C24XX: remove legacy clock code   Heiko Stübner
• [PATCH CFT] ARM:S3C24XX: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Heiko Stübner
• [GIT PULL 4/7] Samsung dev for v3.14   Heiko Stübner
• [PATCH RESEND] clk: divider: read before write for HIWORD mask   Heiko Stübner
• [PATCH v4 0/7] ARM: S3C24XX: Convert s3c2416 and s3c2443 to common clock framework   Heiko Stübner
• [PATCH v4 2/7] clk: samsung: add plls used by the s3c2443   Heiko Stübner
• [PATCH 0/5] drivers: net: Adding support for APM X-Gene SoC Ethernet base driver   Iyappan Subramanian
• [PATCH 1/5] Documentation: APM X-Gene SoC Ethernet DTS binding documentation   Iyappan Subramanian
• [PATCH 2/5] arm64: dts: APM X-Gene SoC Ethernet device tree nodes   Iyappan Subramanian
• [PATCH 4/5] drivers: net: APM X-Gene SoC Ethernet driver error handling   Iyappan Subramanian
• [PATCH 5/5] drivers: net: APM X-Gene SoC Ethernet driver ethtool support   Iyappan Subramanian
• [PATCH 0/5] drivers: net: Adding support for APM X-Gene SoC Ethernet base driver   Iyappan Subramanian
• [linux-sunxi] [PATCH 00/10] net: stmmac: Add sun7i GMAC glue layer   Michal Suchanek
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Michal Suchanek
• [linux-sunxi] Re: [PATCH 1/5] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs   Michal Suchanek
• [PATCH 1/3] drm: Add LCD display clock polarity flags   Ville Syrjälä
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Willy Tarreau
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Willy Tarreau
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Willy Tarreau
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Willy Tarreau
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Willy Tarreau
• gcc miscompiles csum_tcpudp_magic() on ARMv5   Willy Tarreau
• v3.13-rc6+ regression (ARM board)   Willy Tarreau
• [PATCH 08/12] pcie: designware: Fix IO transfers   Jagan Teki
• [PATCH 06/12] pcie: designware: Move register definition to the header file   Jagan Teki
• [PATCH 07/12] pcie: designware: add dw_pcie prefix before cfg_read/write   Jagan Teki
• [PATCH 06/12] pcie: designware: Move register definition to the header file   Jagan Teki
• [PATCH 2/2] net: emaclite: add barriers to support Xilinx Zynq platform   Srikanth Thokala
• [PATCH v2 1/2] net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers   Srikanth Thokala
• [PATCH v2 2/2] net: emaclite: add barriers to support Xilinx Zynq platform   Srikanth Thokala
• [PATCH 7/7] usb: dwc3: exynos: add pm_runtime support   Anton Tikhomirov
• [PATCH 7/7] usb: dwc3: exynos: add pm_runtime support   Anton Tikhomirov
• [PATCH 7/7] usb: dwc3: exynos: add pm_runtime support   Anton Tikhomirov
• *** DEADLOCK ***   John Tobias
• sdhci-esdhc-imx - power management supported   John Tobias
• [PATCH 1/3]: Support cpu frequency scaling and power management for iMX6SL   John Tobias
• [PATCH 2/3]: Support cpu frequency scaling and power management for iMX6SL   John Tobias
• [PATCH 3/3]: Support cpu frequency scaling and power management for iMX6SL   John Tobias
• [PATCH 1/3]: Support cpu frequency scaling and power management for iMX6SL   John Tobias
• [PATCH 1/3]: Support cpu frequency scaling and power management for iMX6SL   John Tobias
• [PATCH 1/4] iMX6SL frequency table   John Tobias
• [PATCH 2/4] Moving of_init_opp_table   John Tobias
• [PATCH 3/4] Removing imx6q_opp_init   John Tobias
• [PATCH 4/4] Added cpufreq support for iMX6SL   John Tobias
• [PATCH 1/3]: Support cpu frequency scaling and power management for iMX6SL   John Tobias
• [PATCH 1/4] iMX6SL frequency table   John Tobias
• [PATCH 3/4] Removing imx6q_opp_init   John Tobias
• [PATCH 2/4] Moving of_init_opp_table   John Tobias
• [PATCH 1/4] ARM: dts: imx6sl: Adding cpu frequency table   John Tobias
• [PATCH 2/4] ARM: imx: Add cpu frequency scaling support   John Tobias
• [PATCH 3/4] cpufreq: imx6q: add of_init_opp_table   John Tobias
• [PATCH 4/4] PM / OPP: export symbol find_device_opp   John Tobias
• [PATCH 2/4] ARM: imx: Add cpu frequency scaling support   John Tobias
• [PATCH 4/4] PM / OPP: export symbol find_device_opp   John Tobias
• [PATCH 1/4] ARM: dts: imx6sl: Adding cpu frequency table   John Tobias
• [PATCH v2 1/3] ARM: dts: imx6sl: Adding cpu frequency and VDDSOC/PU table.   John Tobias
• [PATCH v2 2/3] ARM: imx: Add cpu frequency scaling support   John Tobias
• [PATCH v2 3/3] cpufreq: imx6q: add of_init_opp_table   John Tobias
• [PATCH v2 3/3] cpufreq: imx6q: add of_init_opp_table   John Tobias
• [PATCH v3 1/2] ARM: imx6sl: Add cpu frequency scaling support   John Tobias
• [PATCH v3 2/2] cpufreq: imx6q: add of_init_opp_table   John Tobias
• [PATCH v3] cpufreq: imx6q: add of_init_opp_table   John Tobias
• [PATCH 02/15] input: sh_keysc: Restrict non-COMPILE_TEST compilation   Dmitry Torokhov
• [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Dmitry Torokhov
• [PATCH 5/7] genirq: Add devm_request_any_context_irq()   Dmitry Torokhov
• [PATCH 1/7] Input: pmic8xxx-pwrkey - Pass input device directly to interrupt   Dmitry Torokhov
• [PATCH 2/7] Input: pmic8xxx-pwrkey - Migrate to regmap APIs   Dmitry Torokhov
• [PATCH 10/10] Kconfig: cleanup SERIO_I8042 dependencies   Dmitry Torokhov
• [PATCH 6/7] Input: pmic8xxx-keypad - Migrate to devm_* APIs   Dmitry Torokhov
• [PATCH 1/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp controller   Dmitry Torokhov
• [linux-sunxi] Re: [lm-sensors] [PATCH 2/5] input: sun4i-ts: Add support for temperature sensor   Dmitry Torokhov
• [PATCH 1/5] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp controller   Dmitry Torokhov
• [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Dmitry Torokhov
• [PATCH v2 2/5] input: sun4i-ts: Add support for temperature sensor   Dmitry Torokhov
• [PULL 00/15] KVM/{arm,arm64} updates for 3.14   Marcelo Tosatti
• [PATCH 0/4] mtd: kill the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE   Josh Triplett
• [PATCH V2 0/4] socfpga: clk: trivial fixes and cleanup   Steffen Trumtrar
• [PATCH V2 1/4] ARM: socfpga: clk: remove unused field   Steffen Trumtrar
• [PATCH V2 2/4] ARM: socfpga: clk: fix define typo   Steffen Trumtrar
• [PATCH V2 3/4] ARM: socfpga: clk: fix compile error   Steffen Trumtrar
• [PATCH V2 4/4] ARM: socfpga: clk: split clk code   Steffen Trumtrar
• [PATCH] ARM: socfpga: dts: add pl330 clock   Steffen Trumtrar
• [PATCH 00/10] net: stmmac: Add sun7i GMAC glue layer   Chen-Yu Tsai
• [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware   Chen-Yu Tsai
• [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode   Chen-Yu Tsai
• [PATCH 03/10] net: stmmac: Use platform data tied with compatible strings   Chen-Yu Tsai
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Chen-Yu Tsai
• [PATCH 05/10] ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI   Chen-Yu Tsai
• [PATCH 06/10] ARM: dts: sun7i: Add pin muxing options for the GMAC   Chen-Yu Tsai
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Chen-Yu Tsai
• [PATCH 08/10] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC   Chen-Yu Tsai
• [PATCH 09/10] ARM: dts: sun7i: olinuxino-micro: Enable GMAC instead of EMAC   Chen-Yu Tsai
• [PATCH 10/10] ARM: dts: sun7i: Add ethernet alias for GMAC   Chen-Yu Tsai
• [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode   Chen-Yu Tsai
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Chen-Yu Tsai
• [PATCH 03/10] net: stmmac: Use platform data tied with compatible strings   Chen-Yu Tsai
• [PATCH 10/10] ARM: dts: sun7i: Add ethernet alias for GMAC   Chen-Yu Tsai
• [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware   Chen-Yu Tsai
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode   Chen-Yu Tsai
• [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Chen-Yu Tsai
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Chen-Yu Tsai
• [PATCH 07/10] ARM: dts: sun7i: cubietruck: Enable the GMAC   Chen-Yu Tsai
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Chen-Yu Tsai
• [PATCH 01/12] SPEAr13xx: Correct dt field name for stmmac phy-addr   Chen-Yu Tsai
• [PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware   Chen-Yu Tsai
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Chen-Yu Tsai
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Chen-Yu Tsai
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   Chen-Yu Tsai
• [PATCH 0/4] clk: sunxi: add A20 external output clock support   Chen-Yu Tsai
• [PATCH 1/4] clk: sunxi: Allwinner A20 output clock support   Chen-Yu Tsai
• [PATCH 2/4] ARM: dts: sun7i: external clock outputs   Chen-Yu Tsai
• [PATCH 3/4] pinctrl: sunxi: Add Allwinner A20 clock output pin functions   Chen-Yu Tsai
• [PATCH 4/4] ARM: dts: sun7i: Add pin muxing options for clock outputs   Chen-Yu Tsai
• [PATCH 0/4] clk: sunxi: add A20 external output clock support   Chen-Yu Tsai
• [PATCH 2/4] ARM: dts: sun7i: external clock outputs   Chen-Yu Tsai
• [PATCH 4/4] ARM: dts: sun7i: Add pin muxing options for clock outputs   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   Chen-Yu Tsai
• [PATCH 0/4] clk: sunxi: add A20 external output clock support   Chen-Yu Tsai
• [PATCH 1/4] clk: sunxi: Allwinner A20 output clock support   Chen-Yu Tsai
• [PATCH 2/4] ARM: dts: sun7i: external clock outputs   Chen-Yu Tsai
• [PATCH 3/4] pinctrl: sunxi: Add Allwinner A20 clock output pin functions   Chen-Yu Tsai
• [PATCH 4/4] ARM: dts: sun7i: Add pin muxing options for clock outputs   Chen-Yu Tsai
• [PATCH v2 0/4] clk: sunxi: add A20 external output clock support   Chen-Yu Tsai
• [PATCH v2 1/4] clk: sunxi: Allwinner A20 output clock support   Chen-Yu Tsai
• [PATCH v2 2/4] ARM: dts: sun7i: external clock outputs   Chen-Yu Tsai
• [PATCH v2 3/4] pinctrl: sunxi: Add Allwinner A20 clock output pin functions   Chen-Yu Tsai
• [PATCH v2 4/4] ARM: dts: sun7i: Add pin muxing options for clock outputs   Chen-Yu Tsai
• [PATCH v2 2/4] ARM: dts: sun7i: external clock outputs   Chen-Yu Tsai
• [PATCH v3 0/5] clk: sunxi: add A20 external output clock support   Chen-Yu Tsai
• [PATCH v3 1/5] clk: sunxi: Allwinner A20 output clock support   Chen-Yu Tsai
• [PATCH v3 2/5] ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk at N style   Chen-Yu Tsai
• [PATCH v3 3/5] ARM: dts: sun7i: external clock outputs   Chen-Yu Tsai
• [PATCH v3 4/5] pinctrl: sunxi: Add Allwinner A20 clock output pin functions   Chen-Yu Tsai
• [PATCH v3 5/5] ARM: dts: sun7i: Add pin muxing options for clock outputs   Chen-Yu Tsai
• [PATCH CFT] ARM:S5P64X0: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Panchaxari Prasannamurthy Tumkur
• [PATCH CFT] ARM:S5P64X0: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Panchaxari Prasannamurthy Tumkur
• pull request for clk-tegra-next   Mike Turquette
• pull request for clk-tegra-next   Mike Turquette
• [PATCH v2 2/2] clk: add accuracy support for fixed clock   Mike Turquette
• [PATCH v2] clk: exynos5420: fix cpll clock register offsets   Mike Turquette
• [PATCH v2] clk: exynos5420: fix cpll clock register offsets   Mike Turquette
• [GIT PULL][for 3.14] pull request for hisilicon clock driver   Mike Turquette
• [PATCH] MAINTAINERS: Add maintainer for the ARM Ux500 clock driver   Mike Turquette
• [PATCH 22/41] clk: ux500: Copy u8500_clk_init() ready for DT enablement   Mike Turquette
• [GIT PULL FOR v3.14] Renesas R-Car Gen 2 Common Clock Framework   Mike Turquette
• [GIT PULL FOR v3.14] Renesas R-Car Gen 2 Common Clock Framework   Mike Turquette
• [GIT PULL v2][for 3.14] pull request for hisilicon clock   Mike Turquette
• [PATCH v2 2/3] clk: bcm281xx: add initial clock framework support   Mike Turquette
• [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions   Mike Turquette
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Mike Turquette
• [PATCH v3 01/12] clk: Fix debugfs reparenting NULL pointer dereference   Mike Turquette
• [PATCH v2 3/3] ARM: OMAP4: dts: Add main and optional clock data into DT   Mike Turquette
• [PATCHv10 10/41] CLK: TI: add support for clockdomain binding   Mike Turquette
• [PATCHv10 00/41] ARM: TI SoC clock DT conversion   Mike Turquette
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   Mike Turquette
• [PATCH] drivers: clk: Fix build break introduced in 3e1e4a5f   Mike Turquette
• [PATCH v2 2/3] clk: bcm281xx: add initial clock framework support   Mike Turquette
• [PATCH v5] clk: si570: Add a driver for SI570 oscillators   Mike Turquette
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   Mike Turquette
• [PATCH v2 01/11] clk: sunxi: register factors clocks behind composite   Mike Turquette
• [PATCH v2 02/11] clk: sunxi: add gating support to PLL1   Mike Turquette
• [PATCH v2 04/11] clk: sunxi: make factors_clk_setup return the clock it registers   Mike Turquette
• [PATCHv10 10/41] CLK: TI: add support for clockdomain binding   Mike Turquette
• [PATCH 2/3] clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks   Mike Turquette
• [PATCH 2/4] clk: tegra: add EMC clock driver   Mike Turquette
• [PATCH 3/3] ARM: dts: Fix MDMA0 clock number   Mike Turquette
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   Mike Turquette
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   Mike Turquette
• [PATCH v1 0/4] powerpc/512x: update COMMON_CLK support for MPC5125   Mike Turquette
• [PATCH V2 0/4] socfpga: clk: trivial fixes and cleanup   Mike Turquette
• [PATCH] clk: samsung: exynos4: Correct SRC_MFC register   Mike Turquette
• [PATCH v3 04/12] clk: Add regmap core helpers for enable/disable/is_enabled   Mike Turquette
• [PATCH v2 05/11] clk: sunxi: add PLL5 and PLL6 support   Mike Turquette
• [PATCH v2 07/11] clk: sunxi: mod0 support   Mike Turquette
• [GIT PULL] Xilinx Zynq clk changes for v3.14   Mike Turquette
• [PATCH] clk: remove CONFIG_COMMON_CLK_DEBUG   Mike Turquette
• [PATCH] clk: exynos: File scope reg_save array should depend on PM_SLEEP   Mike Turquette
• [PATCH] clk: at91: fix pmc_clk_ids data type attriubte   Mike Turquette
• [PATCH] clk: at91: fix pmc_clk_ids data type attriubte   Mike Turquette
• [PATCH 2/3] clk: exynos5420: Add alias names for cpu clocks   Mike Turquette
• [RESEND PATCH v7 1/5] omap3isp: Modify clocks registration to avoid circular references   Mike Turquette
• [GIT PULL] Xilinx Zynq clk changes for v3.14   Mike Turquette
• [PATCH Resend 1/1] clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apll   Mike Turquette
• [PATCH 03/10] clk: tegra: Staticize local variables in clk-pll.c   Mike Turquette
• [PATCH Resend 01/10] clk: bcm2835: Remove duplicate inclusion of clk-provider.h   Mike Turquette
• [PATCH] clk: tegra: Add missing Tegra20 fuse clks   Mike Turquette
• [GIT PULL v2] Xilinx Zynq clk changes for v3.14   Mike Turquette
• [GIT PULL] clk: mvebu: for v3.14   Mike Turquette
• [PATCH v2] MAINTAINERS: take maintainership for Energy Micro efm32 SoCs   Mike Turquette
• [GIT PULL] Renesas ARM based SoC Clock updates for v3.14   Mike Turquette
• [PATCH v2 3/3] ARM: shmobile: kzm9d: Use common clock framework   Mike Turquette
• [PATCH 1/1] clk: si570: Remove redundant of_match_ptr helper   Mike Turquette
• [PATCH Resend 01/10] clk: bcm2835: Remove duplicate inclusion of clk-provider.h   Mike Turquette
• [PATCH 1/2] clk: versatile: pass a name to ICST clock provider   Mike Turquette
• [PATCH 2/2] clk: versatile: fixup IM-PD1 clock implementation   Mike Turquette
• [PATCH 1/4] clk: sunxi: Allwinner A20 output clock support   Mike Turquette
• [PATCH v3 00/13] clk: sunxi: add PLL5 and PLL6 support   Mike Turquette
• [RFC 12/18] clk: versatile: Split config options for sp810 and vexpress_osc   Mike Turquette
• [PATCH v4 1/7] clk: samsung: add pll_6552 variant for s3c2416   Mike Turquette
• [PATCH v4 2/7] clk: samsung: add plls used by the s3c2443   Mike Turquette
• [GIT PULL] clk: initial support for Broadcom Kona clocks   Mike Turquette
• [GIT PULL] clk: socfpga: Clean-ups for 3.14   Mike Turquette
• [PATCH] clk: remove CONFIG_COMMON_CLK_DEBUG   Mike Turquette
• [PATCH 1/4] clk: sunxi: Allwinner A20 output clock support   Mike Turquette
• [GIT PULL] Allwinner sunXi clock changes for 3.14   Mike Turquette
• [PATCH v5 Resend 1/3] clk: samsung: Add clock driver for s5pc110/s5pv210   Mike Turquette
• [PATCH 0/4] clk: sunxi: add A20 external output clock support   Mike Turquette
• [PATCH 0/7] misc Tegra clock fixes   Mike Turquette
• [PATCH RESEND 1/4] clk: clk-s2mps11: Refactor for including support for other MFD clocks   Mike Turquette
• [PATCH] MAINTAINERS: Update Allwinner sunXi maintainer files   Mike Turquette
• [GIT PULL] clk: keystone: Couple of misc updates for 3.14   Mike Turquette
• [PATCH RESEND 1/4] clk: clk-s2mps11: Refactor for including support for other MFD clocks   Mike Turquette
• [RESEND PATCH v7 1/5] omap3isp: Modify clocks registration to avoid circular references   Mike Turquette
• [PATCH v2 0/8] clk: max77686: Clock provider implementation fixes   Mike Turquette
• [PATCH 06/12] clk: samsung: add plls used by the early s3c24xx cpus   Mike Turquette
• [PATCH 03/12] clk: samsung: add clock driver for external clock outputs   Mike Turquette
• [PATCH v5 0/3] Exynos 5410 support   Vyacheslav Tyrtov
• [PATCH v5 1/3] ARM: EXYNOS: Add support for EXYNOS5410 SoC   Vyacheslav Tyrtov
• [PATCH v5 2/3] clk: exynos5410: register clocks using common clock framework   Vyacheslav Tyrtov
• [PATCH v5 3/3] ARM: dts: Add initial device tree support for EXYNOS5410   Vyacheslav Tyrtov
• [PATCH 0/2] ARM: DTS: am335x-evmsk: Audio and MMC1 fix (for 3.13?)   Peter Ujfalusi
• [PATCH 1/2] ARM: DTS: am335x-evmsk: Correct audio clock frequency   Peter Ujfalusi
• [PATCH 2/2] ARM: dts: am335x-evmsk: Fix mmc1 support   Peter Ujfalusi
• [PATCH] ARM: imx: use __initconst for const init definition   Greg Ungerer
• [PATCH][RESEND] ARM: misc: remove deprecated IRQF_DISABLED   Greg Ungerer
• [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support   Geert Uytterhoeven
• [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support   Geert Uytterhoeven
• [PATCH v3 2/3] ARM: shmobile: Koelsch: add Ether support   Geert Uytterhoeven
• [PATCH] ARM: shmobile: koelsch: Conditionally select MICREL_PHY   Geert Uytterhoeven
• [PATCH 5/5] i2c: riic: add driver   Geert Uytterhoeven
• [PATCH 00/04 v2] ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL V2   Geert Uytterhoeven
• [PATCH 0/6] Preliminary SoC and board integration for RSPI on RZ/A1H   Geert Uytterhoeven
• [PATCH 1/6] pinctrl: sh-pfc: r7s72100: Add RSPI support   Geert Uytterhoeven
• [PATCH 2/6] ARM: shmobile: r7s72100: Add RSPI clocks   Geert Uytterhoeven
• [PATCH 3/6] ARM: shmobile: r7s72100: Add RSPI resources   Geert Uytterhoeven
• [PATCH 4/6] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Geert Uytterhoeven
• [PATCH 5/6] [RFC] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes   Geert Uytterhoeven
• [PATCH 6/6] [RFC] arm: shmobile: genmai reference: Add RSPI nodes   Geert Uytterhoeven
• [PATCH 6/6] [RFC] arm: shmobile: genmai reference: Add RSPI nodes   Geert Uytterhoeven
• [PATCH V2 2/5] arm: shmobile: r7s72100: add i2c clocks   Geert Uytterhoeven
• [PATCH V2 2/5] arm: shmobile: r7s72100: add i2c clocks   Geert Uytterhoeven
• [PATCH V2 2/5] arm: shmobile: r7s72100: add i2c clocks   Geert Uytterhoeven
• [PATCH 4/6] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Geert Uytterhoeven
• [PATCH 6/6] [RFC] arm: shmobile: genmai reference: Add RSPI nodes   Geert Uytterhoeven
• [PATCH v2 0/8] SoC and board integration for RSPI on RZ/A1H   Geert Uytterhoeven
• [PATCH v2 1/8] pinctrl: sh-pfc: r7s72100: Add RSPI support   Geert Uytterhoeven
• [PATCH v2 2/8] ARM: shmobile: r7s72100: Add RSPI clocks   Geert Uytterhoeven
• [PATCH v2 3/8] ARM: shmobile: r7s72100: Add RSPI platform devices   Geert Uytterhoeven
• [PATCH v2 4/8] ARM: shmobile: genmai: Add RSPI children   Geert Uytterhoeven
• [PATCH v2 5/8] [RFC] ARM: shmobile: genmai: Add preliminary RSPI pinmux setup   Geert Uytterhoeven
• [PATCH v2 6/8] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Geert Uytterhoeven
• [PATCH v2 7/8] [RFC] ARM: shmobile: r7s72100 dtsi: Add RSPI nodes   Geert Uytterhoeven
• [PATCH v2 8/8] [RFC] ARM: shmobile: genmai reference: Add RSPI nodes   Geert Uytterhoeven
• [PATCH 4/6] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Geert Uytterhoeven
• [PATCH v2 6/8] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Geert Uytterhoeven
• [PATCH 4/6] [RFC] Documentation: dt: Add Renesas RSPI/QSPI bindings   Geert Uytterhoeven
• [PATCH 12/15] thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST   Eduardo Valentin
• [PATCH] thermal: imx_thermal: add module device table   Eduardo Valentin
• [PATCH V3 2/2] thermal: imx: add necessary clk operation   Eduardo Valentin
• [patch] video: vt8500: fix error handling in probe()   Tomi Valkeinen
• [PATCH v2 0/3] ARM: OMAP2+: USB Host bug fixes for 3.13 rc   Tomi Valkeinen
• OMAP display subsystem - does it work?   Tomi Valkeinen
• OMAP display subsystem - does it work?   Tomi Valkeinen
• OMAP display subsystem - does it work?   Tomi Valkeinen
• OMAP display subsystem - does it work?   Tomi Valkeinen
• OMAP display subsystem - does it work?   Tomi Valkeinen
• OMAP display subsystem - does it work?   Tomi Valkeinen
• OMAP display subsystem - does it work?   Tomi Valkeinen
• [PATCH 0/2] omapfb: option to use coherent dma mem   Tomi Valkeinen
• [PATCH 1/2] ARM: omapfb: add coherent dma memory support   Tomi Valkeinen
• [PATCH 2/2] omapfb: add support to reserve fb at specified phys address   Tomi Valkeinen
• [PATCH 1/5] crypto: Fully restore ahash request before completing   Marek Vasut
• [PATCH 2/5] ARM: mxs: crypto: Remove the old DCP driver   Marek Vasut
• [PATCH V2 3/5] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 4/5] ARM: mxs: dts: Enable DCP for MXS   Marek Vasut
• [PATCH 5/5] crypto: Sort drivers/crypto/Makefile   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 1/3] drm: Add LCD display clock polarity flags   Marek Vasut
• [PATCH 2/3] imx-drm: ipuv3-crtc: Make DISP_CLK polarity configurable   Marek Vasut
• [PATCH 3/3] ARM: dts: imx53: Switch DISP_CLK polarity on M53EVK   Marek Vasut
• [PATCH 4/7] PCI: imx6: Split away the PHY reset   Marek Vasut
• [PATCH 1/3] drm: Add LCD display clock polarity flags   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 2/5] ARM: mxs: crypto: Remove the old DCP driver   Marek Vasut
• [PATCH V3 1/3] ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   Marek Vasut
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Marek Vasut
• [PATCHv5][ 3/8] staging: imx-drm: Correct BGR666 and the board's dts that use them.   Marek Vasut
• [PATCHv5][ 4/8] staging: imx-drm: Use de-active and pixelclk-active display-timings.   Marek Vasut
• [PATCHv5][ 5/8] staging: imx-drm: parallel display: add regulator support.   Marek Vasut
• [PATCHv5][ 6/8] ARM: dts: mbimx51sd: Add display support.   Marek Vasut
• i.MX6/PCIe and MSI interrupts   Marek Vasut
• 回复：Re: i.MX6/PCIe and MSI interrupts   Marek Vasut
• [PATCH 1/3] drm: Add LCD display clock polarity flags   Marek Vasut
• [PATCH] ARM: dts: stmpe-ts: fix wrong bindings   Marek Vasut
• [PATCH V2 2/4] mtd: spi-nor: add the basic data structures   Marek Vasut
• [PATCH V6 3/3] ahci: imx: Add i.MX53 support   Marek Vasut
• i.MX6/PCIe and MSI interrupts   Marek Vasut
• [PATCH] ARM: pxa: prevent PXA270 occasional reboot freezes   Marek Vasut
• [PATCH V2 3/5] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 1/5] crypto: Fully restore ahash request before completing   Marek Vasut
• [PATCH V2 2/5] crypto: mxs: Remove the old DCP driver   Marek Vasut
• [PATCH V3 3/5] crypto: mxs: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 4/5] ARM: mxs: dts: Enable DCP for MXS   Marek Vasut
• [PATCH V2 5/5] crypto: Sort drivers/crypto/Makefile   Marek Vasut
• [PATCH V2 2/4] mtd: spi-nor: add the basic data structures   Marek Vasut
• [PATCH 08/12] pcie: designware: Fix IO transfers   Marek Vasut
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Marek Vasut
• [PATCH 2/7] PCI: imx6: Fix waiting for link up   Marek Vasut
• [PATCH V2 3/7] PCI: imx6: Split away the PHY reset   Marek Vasut
• [PATCH 4/7] PCI: imx6: Split away the link up wait loop   Marek Vasut
• [PATCH V2 5/7] PCI: imx6: Fix link start operation   Marek Vasut
• [PATCH 6/7] PCI: imx6: Fix bugs in PCIe startup code   Marek Vasut
• [PATCH 7/7] ARM: dts: imx6q-sabrelite: Enable PCI express   Marek Vasut
• [PATCH V2 2/4] mtd: spi-nor: add the basic data structures   Marek Vasut
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Marek Vasut
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Marek Vasut
• [PATCH 1/7] PCI: imx6: Make reset-gpio optional   Marek Vasut
• [PATCH V2 1/7] PCI: imx6: Make reset-gpio optional   Marek Vasut
• [PATCH 2/7] PCI: imx6: Fix waiting for link up   Marek Vasut
• [PATCH V2 3/7] PCI: imx6: Split away the PHY reset   Marek Vasut
• [PATCH 4/7] PCI: imx6: Split away the link up wait loop   Marek Vasut
• [PATCH V2 5/7] PCI: imx6: Fix link start operation   Marek Vasut
• [PATCH 6/7] PCI: imx6: Fix bugs in PCIe startup code   Marek Vasut
• [PATCH 7/7] ARM: dts: imx6q-sabrelite: Enable PCI express   Marek Vasut
• [PATCH] pci: designware: fix missing msi irqs   Marek Vasut
• [PATCH V1 01/11] ARM: dts: imx: sabrelite: add Dual Lite/Solo support   Marek Vasut
• [PATCH V1 02/11] ARM: dts: imx6qdl-sabrelite: Add uart1 support   Marek Vasut
• [PATCH V1 03/11] ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio   Marek Vasut
• [PATCH V1 04/11] ARM: dts: imx6qdl-sabrelite: add comments for pinctrl_hog   Marek Vasut
• [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings   Marek Vasut
• [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Marek Vasut
• [PATCH V1 07/11] ARM: dts: imx6qdl-sabrelite: add pwms for backlights   Marek Vasut
• [PATCH V1 08/11] ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy   Marek Vasut
• [PATCH V1 09/11] ARM: dts: imx6qdl-sabrelite: fix ENET group   Marek Vasut
• [PATCH V1 10/11] ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg   Marek Vasut
• [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings   Marek Vasut
• [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Marek Vasut
• [PATCH V1 01/11] ARM: dts: imx: sabrelite: add Dual Lite/Solo support   Marek Vasut
• [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings   Marek Vasut
• [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys   Marek Vasut
• [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings   Marek Vasut
• [PATCH V1 03/11] ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio   Marek Vasut
• [PATCH v3 1/7] mtd: spi-nor: copy the SPI NOR commands to a new header file   Marek Vasut
• [PATCH v3 2/7] mtd: spi-nor: add the basic data structures   Marek Vasut
• [PATCH v3 3/7] mtd: spi-nor: add the framework for SPI NOR   Marek Vasut
• [PATCH v3 6/7] Documentation: add the binding file for Quadspi driver   Marek Vasut
• [PATCH v3 7/7] mtd: spi-nor: Add Freescale QuadSpi driver   Marek Vasut
• [PATCH v3 6/7] Documentation: add the binding file for Quadspi driver   Marek Vasut
• [PATCH v3 2/7] mtd: spi-nor: add the basic data structures   Marek Vasut
• [PATCH 1/5] crypto: Fully restore ahash request before completing   Marek Vasut
• [PATCH 1/2] gpio: msm: Fix irq mask/unmask by writing bits instead of numbers   Rohit Vaswani
• [PATCH 0/7] Fix omap-iommu probe and convert to DT for 3.14   Florian Vaussard
• [PATCH 1/7] iommu/omap: Do bus_set_iommu() only if probe() succeeds   Florian Vaussard
• [PATCH 2/7] iommu/omap: omap_iommu_attach() should return ENODEV, not NULL   Florian Vaussard
• [PATCH 3/7] iommu/omap: Convert to devicetree   Florian Vaussard
• [PATCH 4/7] iommu/omap: Allow enable/disable even without pdata   Florian Vaussard
• [PATCH 5/7] ARM: dts: Complete data for isp iommu   Florian Vaussard
• [PATCH 6/7] ARM: OMAP2+: Remove legacy data from hwmod for omap3 isp iommu   Florian Vaussard
• [PATCH 7/7] ARM: OMAP2+: Remove platform-specific omap-iommu   Florian Vaussard
• [PATCH 0/7] Fix omap-iommu probe and convert to DT for 3.14   Florian Vaussard
• [PATCH 1/7] iommu/omap: Do bus_set_iommu() only if probe() succeeds   Florian Vaussard
• [PATCH 3/7] iommu/omap: Convert to devicetree   Florian Vaussard
• [PATCH 4/7] iommu/omap: Allow enable/disable even without pdata   Florian Vaussard
• [PATCH 5/7] ARM: dts: Complete data for isp iommu   Florian Vaussard
• [PATCH 6/7] ARM: OMAP2+: Remove legacy data from hwmod for omap3 isp iommu   Florian Vaussard
• questions of cpuidle   Arjan van de Ven
• [PATCH] ASoC: samsung: Initialize the dma_data for secondary dai   Padma Venkat
• ARM Coresight: Enhance ETM tracing control   Adrien Vergé
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Adrien Vergé
• [PATCH 1/3] ARM Coresight: Rename 'comparator' to 'address   Adrien Vergé
• [PATCH 2/3] ARM Coresight: Add address control support for ETM   Adrien Vergé
• [PATCH 3/3] ARM Coresight: Add PID control support for ETM tracing   Adrien Vergé
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Adrien Vergé
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Adrien Vergé
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Adrien Vergé
• [PATCH 0/3] ARM Coresight: Enhance ETM tracing control   Adrien Vergé
• [PATCH v4 15/16] ARM: add uprobes support   Rabin Vincent
• [PATCH v7 1/3] charger: max14577: Add charger support for Maxim 14577   Anton Vorontsov
• [PATCH] gpio-charger: support wakeup events   Anton Vorontsov
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   David Vrabel
• [PATCH] ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL   Lokesh Vutla
• [PATCH] ARM:INTEGRATOR: Default enable ARM_PATCH_PHYS_VIRT, AUTO_ZRELADDR   Linus Walleij
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Linus Walleij
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Linus Walleij
• pinctrl - detailed gpio-mode pinconf design   Linus Walleij
• [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation   Linus Walleij
• [PATCH v3 14/36] mtd: st_spi_fsm: Add device-tree binding documentation   Linus Walleij
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Linus Walleij
• [PATCH] ARM: ux500: delete U8549 UART auxdata   Linus Walleij
• [RFC part3 PATCH 2/2] ARM64 / clocksource: Use arch_timer_acpi_init()   Linus Walleij
• [PATCH v2] pinctrl: baytrail: lock IRQs when starting them   Linus Walleij
• [PATCH] gpio: MOXA ART: rename moxart_gpio_base to base   Linus Walleij
• [PATCH] ARM:INTEGRATOR: Default enable ARM_PATCH_PHYS_VIRT, AUTO_ZRELADDR   Linus Walleij
• [PATCH 1/2] ARM: integrator: delete static core module mappings   Linus Walleij
• [PATCH 2/2] ARM: integrator: move EBI to the device tree   Linus Walleij
• Boot time errors/warnings on snowball   Linus Walleij
• [PATCH] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Linus Walleij
• [PATCH] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Linus Walleij
• [PATCH v2 0/3] pinctrl: Qualcomm 8x74 pinctrl driver   Linus Walleij
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Linus Walleij
• [PATCH] pinctrl: add dependency on OF for MSM driver   Linus Walleij
• [PATCH][RESEND] ARM: misc: remove deprecated IRQF_DISABLED   Linus Walleij
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Linus Walleij
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Linus Walleij
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Linus Walleij
• [PATCH] pinctrl: select dependency on OF for MSM driver   Linus Walleij
• [PATCH] serial: pl011: also enable DMA Rx polling with no platform data   Linus Walleij
• [PATCH] pinctrl: make the MSM SoC driver depend on OF   Linus Walleij
• [PATCH 4/4] ARM: at91: localize GPIO header   Linus Walleij
• [RFC part1 PATCH 0/7] Make ACPI core running on ARM64   Linus Walleij
• [Linaro-acpi] [RFC part1 PATCH 1/7] ACPI: Make ACPI core running without PCI on ARM64   Linus Walleij
• [RFC part2 PATCH 7/9] irqdomain: Add a new API irq_create_acpi_mapping()   Linus Walleij
• [PATCH 1/2] clk: versatile: pass a name to ICST clock provider   Linus Walleij
• [PATCH 2/2] clk: versatile: fixup IM-PD1 clock implementation   Linus Walleij
• [GIT PULL] two Integrator devicetree patches   Linus Walleij
• [PATCH v2 1/1] gpio: twl4030: Fix regression for twl gpio LED output   Linus Walleij
• [PATCH 5/8] gpio: twl4030: Fix regression for twl gpio output   Linus Walleij
• [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Linus Walleij
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Linus Walleij
• [PATCH] ARM: pxa: fix USB gadget driver compilation regression   Linus Walleij
• [PATCH] serial: pl011: also enable DMA Rx polling with no platform data   Linus Walleij
• pinctrl - detailed gpio-mode pinconf design   Linus Walleij
• [PATCH 1/2] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Linus Walleij
• [PATCH 2/2] ARM: s3c64xx: get rid of custom <mach/gpio.h>   Linus Walleij
• [PATCH 2/3] pinctrl: at91: initialize config parameter to 0   Linus Walleij
• [PATCH 2/3] pinctrl: at91: initialize config parameter to 0   Linus Walleij
• [PATCH 1/3] pinctrl: at91: correct a few typos   Linus Walleij
• [PATCH 2/3] pinctrl: at91: initialize config parameter to 0   Linus Walleij
• [PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show   Linus Walleij
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   Linus Walleij
• [PATCH] pinctrl: pinconf: remove checks on ops->pin_config_get   Linus Walleij
• [PATCH 1/2] gpio: msm: Fix irq mask/unmask by writing bits instead of numbers   Linus Walleij
• [PATCH 2/2] gpio: msm: Add module device table and mark table const   Linus Walleij
• [PATCH v2 1/3] pinctrl: Add Qualcomm TLMM driver   Linus Walleij
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Linus Walleij
• [PATCH 01/10] sh-pfc: Turn unsigned indices into unsigned int   Linus Walleij
• [PATCH 02/10] sh-pfc: Terminate gpios array by -1   Linus Walleij
• [PATCH 03/10] sh-pfc: sh73a0: Add missing IRQ15   Linus Walleij
• [PATCH 04/10] sh-pfc: sh73a0: Sort IRQ entries by IRQ number   Linus Walleij
• [PATCH 05/10] sh-pfc: Rename sh_pfc window field to windows   Linus Walleij
• [PATCH 06/10] sh-pfc: Support GPIO to IRQ mapping specified IRQ resources   Linus Walleij
• [PATCH 07/10] ARM: shmobile: r8a73a4: Specify PFC interrupts in DT   Linus Walleij
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Linus Walleij
• [PATCH v2 02/11] arm: pxa27x: support ICP DAS LP-8x4x   Linus Walleij
• [PATCH v3 4/6] pinctrl: Add pinctrl binding for Broadcom Capri SoCs   Linus Walleij
• [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig   Linus Walleij
• [PATCH v3 2/6] pinctrl: Adds slew-rate, input-enable/disable   Linus Walleij
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Linus Walleij
• [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Linus Walleij
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Linus Walleij
• [PATCH CFT] ARM:S5P64X0: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Linus Walleij
• [PATCH 1/3] pinctrl: at91: correct a few typos   Linus Walleij
• [PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show   Linus Walleij
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Linus Walleij
• [PATCH v2 2/3] pinctrl: Add msm8x74 configuration   Linus Walleij
• [PATCH CFT] ARM:S5P64X0: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   Linus Walleij
• [PATCH] ARM: integrator: use managed resources for the IM-PD1   Linus Walleij
• [PATCH 1/2] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Linus Walleij
• [PATCH 1/3] ARM: ux500: Refactor common DT configs for sdi[n] devices   Linus Walleij
• [PATCH 2/3] ARM: ux500: Configure regulator for I/O voltage for SD-card slot   Linus Walleij
• [PATCH V2 3/3] ARM: ux500: regulators: Remove dead code for SD-card regulator   Linus Walleij
• [PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show   Linus Walleij
• [PATCH 1/2] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Linus Walleij
• [PATCH 1/2 v3] ARM: s3c24xx: get rid of custom <mach/gpio.h>   Linus Walleij
• [PATCH 2/2 v2] ARM: s3c64xx: get rid of custom <mach/gpio.h>   Linus Walleij
• [PATCH] pinctrl: pinconf: remove warning: unused variable 'ops'   Linus Walleij
• [GIT PULL] Nomadik DT changes for v3.14   Linus Walleij
• [PATCH v3 2/6] pinctrl: Adds slew-rate, input-enable/disable   Linus Walleij
• [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig   Linus Walleij
• pinctrl - detailed gpio-mode pinconf design   Linus Walleij
• [PATCH 1/1] usb: musb: ux500_dma: fix potential NULL dereference error   Linus Walleij
• [PATCH v3 4/6] pinctrl: Add pinctrl binding for Broadcom Capri SoCs   Linus Walleij
• [PATCH 1/2] pinctrl: at91: fix clk_unprepare and clk_disable order   Linus Walleij
• [PATCH 2/2] pinctrl: at91: replace clk_prepare + clk_enable by clk_prepare_enable   Linus Walleij
• [PATCH v6 6/6] ARM: davinci: da850 evm: add GPIO pinumux entries DT node   Linus Walleij
• [GIT PULL] get rid of <mach/timex.h>   Linus Walleij
• [GIT PULL] U300 patches for v3.14   Linus Walleij
• [PATCH v3 00/10] ARM: sa1100: improve irq handling   Linus Walleij
• [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig   Linus Walleij
• [PATCH 0/2] gpio: davinci: reuse for keystone arch   Linus Walleij
• [PATCH v2 0/2] gpio: davinci: reuse for keystone arch   Linus Walleij
• [PATCH 1/5] ARM: versatile: move GPIO2 and GPIO3 to core   Linus Walleij
• [PATCH 2/5] ARM: versatile: update defconfig   Linus Walleij
• [PATCH 3/5] ARM: versatile: enable GPIOLIB and PL061 by default   Linus Walleij
• [PATCH 4/5] ARM: versatile: build using EABI   Linus Walleij
• [PATCH 5/5] ARM: versatile: enable LEDs by default   Linus Walleij
• [PATCH 1/2] clk: versatile: pass a name to ICST clock provider   Linus Walleij
• [PATCH 2/2] clk: versatile: fixup IM-PD1 clock implementation   Linus Walleij
• [RFC 03/18] GPIO: gpio-generic: Add label to platform data   Linus Walleij
• [PATCH 00/10] sh-pfc: Fix GPIO to IRQ mapping   Linus Walleij
• Tegra baseline test results for v3.13-rc2   Paul Walmsley
• [PATCH] ARM: OMAP2+: Fix populating the hwmod data from device tree   Paul Walmsley
• Tegra baseline test results for v3.13-rc3   Paul Walmsley
• [PATCH 1/3] ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module   Paul Walmsley
• [PATCH 2/3] ARM: OMAP2+: hwmod: Fix RESET logic   Paul Walmsley
• [PATCH 3/3] ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module   Paul Walmsley
• [PATCH v2 0/3] ARM: OMAP2+: USB Host bug fixes for 3.13 rc   Paul Walmsley
• [PATCH] ARM: OMAP2+: hwmod: Fix usage of invalid iclk / oclk when clock node is not present   Paul Walmsley
• [PATCH 1/3] ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module   Paul Walmsley
• OMAP baseline test results for v3.13-rc1 (toolchain Debian 4.7.2-5)   Paul Walmsley
• OMAP baseline test results for v3.13-rc2   Paul Walmsley
• OMAP baseline test results for v3.13-rc3   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod code/data: fixes for v3.13-rc   Paul Walmsley
• [PATCH] ARM: omap1: clock: return 0 upon error from clk_round_rate()   Paul Walmsley
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Paul Walmsley
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Paul Walmsley
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Paul Walmsley
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Paul Walmsley
• [PATCHv10 22/41] ARM: dts: omap5 clock data   Paul Walmsley
• Tegra baseline test results for v3.13-rc4   Paul Walmsley
• OMAP baseline test results for v3.13-rc4   Paul Walmsley
• [GIT PULL] make mach-omap2 boot with device tree only for v3.14   Paul Walmsley
• [PATCHv10 03/41] CLK: ti: add init support for clock IP blocks   Paul Walmsley
• [PATCHv10 03/41] CLK: ti: add init support for clock IP blocks   Paul Walmsley
• [PATCHv10 04/41] CLK: TI: Add DPLL clock support   Paul Walmsley
• [PATCHv10 04/41] CLK: TI: Add DPLL clock support   Paul Walmsley
• [PATCHv10 12/41] CLK: TI: add omap4 clock init file   Paul Walmsley
• [PATCHv10 21/41] ARM: dts: omap4 clock data   Paul Walmsley
• [PATCHv10 22/41] ARM: dts: omap5 clock data   Paul Walmsley
• [PATCHv10 23/41] ARM: dts: dra7 clock data   Paul Walmsley
• [PATCHv10 27/41] ARM: dts: am33xx clock data   Paul Walmsley
• [PATCHv10 28/41] ARM: dts: omap3 clock data   Paul Walmsley
• [PATCHv10 30/41] ARM: dts: am43xx clock data   Paul Walmsley
• [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions   Paul Walmsley
• [PATCHv10 01/41] clk: add support for platform specific clock I/O wrapper functions   Paul Walmsley
• [PATCH 0/6] clk: tegra: add basic support for the DFLL clocksource   Paul Walmsley
• [PATCH 1/6] ARM: tegra: fuse: add functions to read speedo ID and process ID   Paul Walmsley
• [PATCH 2/6] ARM: tegra114: fuse: add DFLL FCPU minimum voltage override test function   Paul Walmsley
• [PATCH 3/6] clk: tegra: add library for the DFLL clocksource (open-loop mode)   Paul Walmsley
• [PATCH 4/6] ARM: DTS: tegra: add the DFLL IP block to the T114 SoC file   Paul Walmsley
• [PATCH 5/6] ARM: DTS: tegra: add DFLL integration to the Dalmore DTS file   Paul Walmsley
• [PATCH 6/6] clk: tegra: add Tegra114 FCPU DFLL clocksource platform driver   Paul Walmsley
• [PATCHv11 01/49] clk: add support for registering clocks from description   Paul Walmsley
• [PATCHv11 03/49] clk: divider: add support for registering divider clock from descriptor   Paul Walmsley
• [PATCHv11 04/49] clk: mux: add support for registering mux clock from descriptor   Paul Walmsley
• [PATCHv11 05/49] clk: gate: add support for registering gate clock from descriptor   Paul Walmsley
• [PATCHv11 06/49] clk: add support for low level register ops   Paul Walmsley
• [PATCHv10 21/41] ARM: dts: omap4 clock data   Paul Walmsley
• [PATCHv11 18/49] CLK: TI: add support for clockdomain binding   Paul Walmsley
• [PATCHv11 43/49] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT   Paul Walmsley
• [PATCHv11 06/49] clk: add support for low level register ops   Paul Walmsley
• Tegra baseline test results for v3.13-rc5   Paul Walmsley
• OMAP baseline test results for v3.13-rc5   Paul Walmsley
• [PATCH] ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL   Paul Walmsley
• [PATCH] ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data   Paul Walmsley
• [PATCH] ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL   Paul Walmsley
• [GIT PULL] ARM: OMAP2+: hwmod data: a few more fixes for v3.13-rc   Paul Walmsley
• [PATCH] of/platform: Fix no irq domain found errors when populating interrupts   Paul Walmsley
• [PATCH 7/9] arm/pci: Use dev_is_pci() to check whether it is pci device   Yijing Wang
• [PATCH 8/9] arm/mach-ixp4xx: Use dev_is_pci() to check whether it is pci device   Yijing Wang
• [PATCH 1/9] PCI: Use dev_is_pci() to check whether it is pci device   Yijing Wang
• [RFC][PATCHv6+++ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Stephen Warren
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Stephen Warren
• [PATCH 02/31] ARM: tegra: document reset properties in DT bindings   Stephen Warren
• [PATCH 03/31] ARM: tegra: document use of standard DMA DT bindings   Stephen Warren
• [PATCH 04/31] ARM: tegra: update DT files to add reset properties   Stephen Warren
• [PATCH 1/5] clk: tegra: fix blink clock rate   Stephen Warren
• pull request for clk-tegra-next   Stephen Warren
• [PATCH V6] kbuild: dtbs_install: new make target   Stephen Warren
• [PATCH V2] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH V2] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH V2] ARM: tegra: add MMC controllers to Tegra124 DT   Stephen Warren
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Stephen Warren
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Stephen Warren
• [PATCH 02/31] ARM: tegra: document reset properties in DT bindings   Stephen Warren
• [PATCH 03/31] ARM: tegra: document use of standard DMA DT bindings   Stephen Warren
• [PATCH 04/31] ARM: tegra: update DT files to add reset properties   Stephen Warren
• [PATCH 07/31] clk: tegra: implement a reset driver   Stephen Warren
• [PATCH 18/31] ASoC: tegra: allocate AHUB FIFO during probe() not startup()   Stephen Warren
• [PATCH] clk: tegra: Correct clock number for UARTE   Stephen Warren
• [PATCH] ARM: tegra: convert device tree files to use key defines   Stephen Warren
• [PATCH 1/2] ARM: dts: tegra: Header file for pinctrl constants   Stephen Warren
• [PATCH 1/2] ARM: dts: tegra: Header file for pinctrl constants   Stephen Warren
• [PATCH 1/2] ARM: dts: tegra: Header file for pinctrl constants   Stephen Warren
• [PATCH 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines   Stephen Warren
• [RFC][PATCHv6+++ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Stephen Warren
• [PATCH V2] clk: tegra: implement a reset driver   Stephen Warren
• [PATCH REPOST] dma: tegra: use reset framework   Stephen Warren
• [PATCH V3] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH REPOST 1/2] clk: tegra: remove legacy reset APIs   Stephen Warren
• [PATCH REPOST 2/2] clk: tegra: remove bogus PCIE_XCLK   Stephen Warren
• [PATCH] ARM: bcm2835: add USB controller to device tree   Stephen Warren
• [PATCH 1/2] ARM: bcm2835: rebuild bcm2835_defconfig   Stephen Warren
• [PATCH 2/2] ARM: bcm2835: enable USB in defconfig   Stephen Warren
• [PATCH v2] ARM: tegra: switch FUSE clock on before usage   Stephen Warren
• [PATCH 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines   Stephen Warren
• [PATCH V2 1/2] ARM: tegra: Add header file for pinctrl constants   Stephen Warren
• [PATCH V2 2/2] ARM: tegra: convert device tree file of Dalmore to use pinctrl defines   Stephen Warren
• [PATCH V2] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH V3] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH 01/31] ARM: tegra: add missing clock documentation to DT bindings   Stephen Warren
• [PATCH V2] ARM: tegra: remove legacy clock entries from DT   Stephen Warren
• [PATCH v2] ARM: tegra: switch FUSE clock on before usage   Stephen Warren
• [PATCH 1/3] ARM: tegra: fix DEBUG_LL combined with LPAE   Stephen Warren
• [PATCH 1/4] ARM: tegra: add I2C controllers to Tegra124 DT   Stephen Warren
• [PATCH 2/4] ARM: tegra: enable I2C controllers on Venice2   Stephen Warren
• [PATCH 3/4] ARM: tegra: add audio-related device to Tegra124 DT   Stephen Warren
• [PATCH 4/4] ARM: tegra: add sound card to Venice2 DT   Stephen Warren
• [PATCH 1/2] ARM: tegra: rebuild tegra_defconfig   Stephen Warren
• [PATCH 2/2] ARM: tegra: enable MAX98090 audio driver in tegra_defconfig   Stephen Warren
• [PATCH] ARM: bcm2835: add USB controller to device tree   Stephen Warren
• [PATCH 1/2] ARM: bcm2835: rebuild bcm2835_defconfig   Stephen Warren
• [PATCH V3] dma: add channel request API that supports deferred probe   Stephen Warren
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Stephen Warren
• [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table   Stephen Warren
• [PATCH v4 3/3] ARM: tegra: correct Colibri T20 regulator settings   Stephen Warren
• [PATCH v4 1/3] mfd: tps6586x: add version detection   Stephen Warren
• [PATCH] ARM: bcm2835: Fix grammar in help message   Stephen Warren
• [PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi   Stephen Warren
• [PATCH 1/4] pinctrl: tegra: Add devicetree binding document for Tegra124   Stephen Warren
• [PATCH 3/4] ARM: tegra: select PINCTRL_TEGRA124 for Tegra124 SoC   Stephen Warren
• [PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi   Stephen Warren
• [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124   Stephen Warren
• [PATCH V3 0/4] ARM: tegra: convert dts files of all Tegra platforms to use pinctrl defines   Stephen Warren
• [PATCH] pinctrl: samsung: Allow pin value to be initialized using pinfunc.   Stephen Warren
• [PATCH 4/4] pinctrl: tegra: add pinmux controller driver for Tegra124   Stephen Warren
• [PATCH 1/4] ARM: tegra: add I2C controllers to Tegra124 DT   Stephen Warren
• [PATCH 2/4] ARM: tegra: enable I2C controllers on Venice2   Stephen Warren
• [PATCH 1/2] ARM: tegra: rebuild tegra_defconfig   Stephen Warren
• [PATCH v5 1/3] mfd: tps6586x: add version detection   Stephen Warren
• [PATCH v5 1/3] mfd: tps6586x: add version detection   Stephen Warren
• [PATCH] ARM: tegra: add missing break to fuse initialization code   Stephen Warren
• [PATCH V2] ARM: tegra: add missing break to fuse initialization code   Stephen Warren
• [PATCH V2] ARM: tegra: add Tegra124 pinmux node to DT   Stephen Warren
• [PATCH] ARM: bcm2835: Fix grammar in help message   Stephen Warren
• [PATCH v11 0/7] ARM: support for the Trusted Foundations secure monitor   Stephen Warren
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Stephen Warren
• [PATCH 2/3] rtc: honor device tree /alias entries when assigning IDs   Stephen Warren
• [PATCH 3/3] ARM: tegra: set up /aliases entries for RTCs   Stephen Warren
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Stephen Warren
• [PATCH V3 REPOST] dma: tegra: register as an OF DMA controller   Stephen Warren
• [PATCH 00/31] ARM: tegra: use common reset and DMA bindings   Stephen Warren
• [PATCH 3/4] ARM: tegra: select PINCTRL_TEGRA124 for Tegra124 SoC   Stephen Warren
• [PATCH 1/2] ARM: tegra: add missing unit addresses to DT   Stephen Warren
• [PATCH 2/2] ARM: tegra: fix node sort order   Stephen Warren
• [PATCH] ARM: tegra: add clock properties for devices of Tegra124   Stephen Warren
• [PATCH 1/4] ARM: tegra: add I2C controllers to Tegra124 DT   Stephen Warren
• [PATCH] ARM: tegra: convert device tree files to use key defines   Stephen Warren
• [PATCH V3 0/4] ARM: tegra: convert dts files of all Tegra platforms to use pinctrl defines   Stephen Warren
• [PATCH v5 3/3] ARM: tegra: correct Colibri T20 regulator settings   Stephen Warren
• [PATCH] ARM: tegra: add default pinctrl nodes for Venice2   Stephen Warren
• [PATCH 1/2] ARM: tegra: rebuild tegra_defconfig   Stephen Warren
• [PATCH 1/2] ARM: tegra: enable ams AS3722 drivers   Stephen Warren
• [PATCH 1/2] ARM: tegra: enable ams AS3722 drivers   Stephen Warren
• [PATCH] ARM: tegra: use PULL_NONE for Venice2 UART pins   Stephen Warren
• [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2   Stephen Warren
• [PATCH V2] ARM: tegra: fix pinctrl misconfiguration on Venic2   Stephen Warren
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Stephen Warren
• [PATCH v11 0/7] ARM: support for the Trusted Foundations secure monitor   Stephen Warren
• [PATCHv6+ 01/13] of: introduce of_property_for_earch_phandle_with_args()   Stephen Warren
• [PATCHv7 04/12] driver/core: populate devices in order for IOMMUs   Stephen Warren
• [PATCHv7 01/12] of: introduce of_property_for_each_phandle_with_args()   Stephen Warren
• [PATCHv7 02/12] iommu/of: introduce a global iommu device list   Stephen Warren
• [PATCHv7 03/12] iommu/of: check if dependee iommu is ready or not   Stephen Warren
• [PATCHv7 05/12] iommu/core: add ops->{bound,unbind}_driver()   Stephen Warren
• [PATCHv7 07/12] iommu/tegra: smmu: register device to iommu dynamically   Stephen Warren
• [PATCHv7 08/12] iommu/tegra: smmu: calculate ASID register offset by ID   Stephen Warren
• [PATCHv7 09/12] iommu/tegra: smmu: get swgroups from DT "iommus="   Stephen Warren
• [PATCHv7 10/12] iommu/tegra: smmu: allow duplicate ASID wirte   Stephen Warren
• [GIT PULL 01/10] ARM: tegra: dependency 1 from the DMA tree   Stephen Warren
• [GIT PULL 02/10] ARM: tegra: dependency from the ASoC tree   Stephen Warren
• [GIT PULL 03/10] ARM: tegra: dependency 2 from the DMA tree   Stephen Warren
• [GIT PULL 04/10] ARM: tegra: dependency from the clock tree   Stephen Warren
• [GIT PULL 05/10] ARM: tegra: common DMA/reset DT binding conversion   Stephen Warren
• [GIT PULL 06/10] ARM: tegra: powergate driver changes   Stephen Warren
• [GIT PULL 07/10] ARM: tegra: Trusted Foundations firmware support   Stephen Warren
• [GIT PULL 08/10] ARM: tegra: SoC-specific core code changes   Stephen Warren
• [GIT PULL 09/10] ARM: tegra: device tree changes   Stephen Warren
• [GIT PULL 10/10] ARM: tegra: defconfig changes   Stephen Warren
• [PATCH 1/4] ARM: tegra: moving tegra_bct_strapping to tegra-soc.h for global visibility   Stephen Warren
• [PATCH 2/4] clk: tegra: add EMC clock driver   Stephen Warren
• [PATCH 1/4] ARM: tegra: moving tegra_bct_strapping to tegra-soc.h for global visibility   Stephen Warren
• [PATCH 4/4] clk: tegra20: enable EMC clock driver   Stephen Warren
• [PATCHv7 06/12] ARM: tegra: create a DT header defining SWGROUP ID   Stephen Warren
• [PATCH 2/4] clk: tegra: add EMC clock driver   Stephen Warren
• [PATCH V2 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT   Stephen Warren
• [PATCH 1/2] ARM: tegra: fix missing pincontrol configuration for Venice2   Stephen Warren
• [PATCH Resend 2/7] clk: tegra: Staticize tegra_clk_periph_nodiv_ops   Stephen Warren
• [PATCH V2 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT   Stephen Warren
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Stephen Warren
• [PATCH V2 2/2] ARM: tegra: add ams AS3722 device to Venice2 DT   Stephen Warren
• [PATCH 2/6] misc: fuse: Add efuse driver for Tegra   Stephen Warren
• [PATCH] clk: tegra: Add missing Tegra20 fuse clks   Stephen Warren
• [PATCH 2/4] clk: tegra: add EMC clock driver   Stephen Warren
• [PATCH 2/4] clk: tegra: add EMC clock driver   Stephen Warren
• [PATCH 05/10] ARM: tegra: Add Tegra114 DSI support   Stephen Warren
• [PATCH 00/10] ARM: tegra: DSI and panel support   Stephen Warren
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Stephen Warren
• [PATCH 06/10] ARM: tegra: Add SPI controller nodes for Tegra124   Stephen Warren
• [PATCH 04/10] ARM: tegra: Add Tegra124 eDP support   Stephen Warren
• [PATCH 10/10] ARM: tegra: Enable USB on Venice2   Stephen Warren
• [PATCH 05/10] ARM: tegra: Enable eDP for Venice2   Stephen Warren
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Stephen Warren
• [PATCH 1/6] ARM: tegra: fuse: add functions to read speedo ID and process ID   Stephen Warren
• [PATCH 2/6] ARM: tegra114: fuse: add DFLL FCPU minimum voltage override test function   Stephen Warren
• [PATCH 3/6] clk: tegra: add library for the DFLL clocksource (open-loop mode)   Stephen Warren
• [PATCH 4/6] ARM: DTS: tegra: add the DFLL IP block to the T114 SoC file   Stephen Warren
• [PATCH 5/6] ARM: DTS: tegra: add DFLL integration to the Dalmore DTS file   Stephen Warren
• [PATCH 03/10] ARM: tegra: Add MIPI calibration DT entries for Tegra114   Stephen Warren
• [PATCH 6/6] clk: tegra: add Tegra114 FCPU DFLL clocksource platform driver   Stephen Warren
• [PATCH 1/3] mfd: always assign of_node in mfd_add_device()   Stephen Warren
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Stephen Warren
• [PATCH 05/10] ARM: tegra: Enable eDP for Venice2   Stephen Warren
• [PATCH 01/10] ARM: tegra: Add AS3722 PMIC on Venice2   Stephen Warren
• [PATCHv7 06/12] ARM: tegra: create a DT header defining SWGROUP ID   Stephen Warren
• [PATCH 07/10] ARM: tegra: Enable Venice2 keyboard   Stephen Warren
• [GIT PULL 1/2] ARM: tegra: second set of device tree changes   Stephen Warren
• [GIT PULL 2/2] ARM: tegra: second set of defconfig changes   Stephen Warren
• [PATCH] ARM: multi_v7: copy most options from tegra_defconfig   Stephen Warren
• [PATCH] ARM: multi_v7: copy most options from tegra_defconfig   Stephen Warren
• [PATCH V2] ARM: multi_v7: copy most options from tegra_defconfig   Stephen Warren
• [PATCH 1/3] ARM: bcm2835: Fix grammar in help message   Stephen Warren
• [PATCH 2/3] ARM: bcm2835: add USB controller to device tree   Stephen Warren
• [PATCH 3/3] ARM: bcm2835: bcm2835_defconfig updates   Stephen Warren
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Lothar Waßmann
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Lothar Waßmann
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Lothar Waßmann
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Lothar Waßmann
• [PATCH] ARM: dts: i.MX27: Configure GPIOs as "input" by default   Lothar Waßmann
• [PATCH] ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition   Lothar Waßmann
• [PATCH] ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition   Lothar Waßmann
• [PATCH] video: mxsfb: fix broken video mode selection   Lothar Waßmann
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Lothar Waßmann
• add support for Ka-Ro TX6 modules   Lothar Waßmann
• [PATCH 1/4] ARM: dts: imx6qdl: add aliases for can interfaces   Lothar Waßmann
• [PATCH 2/4] ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode   Lothar Waßmann
• [PATCH 3/4] ARM: dts: imx6qdl: add new pingroup for audmux   Lothar Waßmann
• [PATCH 4/4] ARM: dts: imx6qdl: add support for Ka-Ro TX6 modules   Lothar Waßmann
• [PATCH 0/4] add support for Ka-Ro TX6 modules   Lothar Waßmann
• [PATCH 1/4] ARM: dts: imx6qdl: add aliases for can interfaces   Lothar Waßmann
• [PATCH 2/4] ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode   Lothar Waßmann
• [PATCH 3/4] ARM: dts: imx6qdl: add new pingroup for audmux   Lothar Waßmann
• [PATCH 4/4] ARM: dts: imx6qdl: add support for Ka-Ro TX6 modules   Lothar Waßmann
• [PATCH v6 01/15] usb: doc: phy-mxs: Add more compatible strings   Lothar Waßmann
• [PATCH v6 01/15] usb: doc: phy-mxs: Add more compatible strings   Lothar Waßmann
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Lothar Waßmann
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Lothar Waßmann
• [PATCH 4/4] ARM: dts: imx6qdl: add support for Ka-Ro TX6 modules   Lothar Waßmann
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Lothar Waßmann
• [PATCH] ARM: dts: imx53: add support for Ka-Ro TX53 modules   Lothar Waßmann
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Lothar Waßmann
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Lothar Waßmann
• [PATCH] ARM: bcm2835: Fix grammar in help message   Stefan Weil
• [PATCH v2] pinctrl: baytrail: lock IRQs when starting them   Mika Westerberg
• [PATCH 0/8] Impedance matcher for Samsung boards   Piotr Wilczek
• [PATCH 1/8] registers: add write u8 type   Piotr Wilczek
• [PATCH 2/8] string: fix strncmp function   Piotr Wilczek
• [PATCH 3/8] device tree blob must be 4-bytes alingned   Piotr Wilczek
• [PATCH 4/8] Makefile: disable generating Thumb code   Piotr Wilczek
• [PATCH 5/8] add memory operations   Piotr Wilczek
• [PATCH 7/8] serial: add Exynos specific serial driver   Piotr Wilczek
• [PATCH 8/8] board: add Samsung specific board support   Piotr Wilczek
• [PATCH 0/8] Impedance matcher for Samsung boards   Piotr Wilczek
• [PATCH 6/8] add support to supplement atags to device tree   Piotr Wilczek
• [PATCH V2 0/8] Impedance matcher for Samsung boards   Piotr Wilczek
• [PATCH V2 1/8] registers: add write u8 type   Piotr Wilczek
• [PATCH V2 2/8] string: fix strncmp function   Piotr Wilczek
• [PATCH V2 3/8] device tree blob must be 4-bytes alingned   Piotr Wilczek
• [PATCH V2 4/8] Makefile: disable generating Thumb code   Piotr Wilczek
• [PATCH V2 5/8] add memory operations   Piotr Wilczek
• [PATCH V2 7/8] serial: add Exynos specific serial driver   Piotr Wilczek
• [PATCH V2 8/8] board: add Samsung specific board support   Piotr Wilczek
• [PATCH V2 2/8] string: fix strncmp function   Piotr Wilczek
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Konrad Rzeszutek Wilk
• [PATCH v2] xen/block: Correctly define structures in public headers on ARM32 and ARM64   Konrad Rzeszutek Wilk
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Konrad Rzeszutek Wilk
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Konrad Rzeszutek Wilk
• [PATCH 3/3] swiotlb: Add support for CMA allocations   Konrad Rzeszutek Wilk
• Build warning in drivers/dma/mmp_tdma.c   Dan Williams
• [PATCH REPOST] dma: tegra: use reset framework   Dan Williams
• Build warning in drivers/dma/mmp_tdma.c   Dan Williams
• Build warning in drivers/dma/mmp_tdma.c   Dan Williams
• [PATCH] dma: fix vchan_cookie_complete() debug print   Dan Williams
• [PATCH V2] dma: tegra: register as an OF DMA controller   Dan Williams
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Dan Williams
• [PATCH] dma: mv_xor: fix kernel crash on probe error   Dan Williams
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Dan Williams
• [PATCH] dma: mv_xor: remove mv_desc_get_dest_addr()   Dan Williams
• [GIT PULL] dmaengine-fixes-3.13-rc4   Dan Williams
• [PATCH 1/3] dma: mv_xor: take channel spinlock in mv_xor_status()   Dan Williams
• [GIT PULL] iommu: arm/smmu: fixes for 3.13   Alex Williamson
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   David Woodhouse
• [PATCH 0/4] mtd: spi-nor: add a new framework for SPI NOR   David Woodhouse
• [PATCH 1/5] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks   Rafael J. Wysocki
• [PATCH 1/5] PM / Sleep: Add pm_generic functions to re-use runtime PM callbacks   Rafael J. Wysocki
• [PATCH V2 0/3] PM: Enable option of re-use runtime PM callbacks at system suspend   Rafael J. Wysocki
• [PATCH V2 0/3] PM: Enable option of re-use runtime PM callbacks at system suspend   Rafael J. Wysocki
• [GIT PULL] ARM : cpuidle: 3.13 fix   Rafael J. Wysocki
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Li Xiubo
• [PATCHv6 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Li Xiubo
• [RFC] pwm: Add Freescale FTM PWM driver support   Li Xiubo
• [PATCHv6 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Li Xiubo
• [RFC] pwm: Add Freescale FTM PWM driver support   Li Xiubo
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Li Xiubo
• [PATCH] crypto: omap-sham - Only release DMA channel if successfully requested   Herbert Xu
• [PATCH 1/5] crypto: Fully restore ahash request before completing   Herbert Xu
• [PATCH 1/5] crypto: Fully restore ahash request before completing   Herbert Xu
• [PATCH RFC v3 04/12] arm64: kernel: cpu_{suspend/resume} implementation   Leo Yan
• [PATCH RFC v3 04/12] arm64: kernel: cpu_{suspend/resume} implementation   Leo Yan
• [PATCH 0/3] regulator: act8865: add PMIC driver   Wenyou Yang
• [PATCH 1/3] regulator: act8865: add PMIC(Power Management IC) driver   Wenyou Yang
• [PATCH 2/3] regulator: act8865: add device tree binding doc   Wenyou Yang
• [PATCH 3/3] ARM: dts: sama5d3xcm: add the regulator device node   Wenyou Yang
• [PATCH 1/3] regulator: act8865: add PMIC(Power Management IC) driver   Yang, Wenyou
• [PATCH 0/3 v2] regulator: act8865: add PMIC driver   Wenyou Yang
• [PATCH 1/3 v2] regulator: act8865: add PMIC act8865 driver   Wenyou Yang
• [PATCH 2/3 v2] regulator: act8865: add device tree binding doc   Wenyou Yang
• [PATCH 3/3 v2] ARM: dts: sama5d3xcm: add the regulator device node   Wenyou Yang
• [PATCH 1/3 v2] regulator: act8865: add PMIC act8865 driver   Yang, Wenyou
• [PATCH 2/3 v2] regulator: act8865: add device tree binding doc   Yang, Wenyou
• [PATCH 3/3 v2] ARM: dts: sama5d3xcm: add the regulator device node   Yang, Wenyou
• [PATCH v3 0/3] regulator: act8865: add PMIC driver   Wenyou Yang
• [PATCH v3 1/3] regulator: act8865: add PMIC act8865 driver   Wenyou Yang
• [PATCH v3 2/3] regulator: act8865: add device tree binding doc   Wenyou Yang
• [PATCH v3 3/3] ARM: dts: sama5d3xcm: add the regulator device node   Wenyou Yang
• [PATCH v4 0/3] regulator: act8865: add PMIC driver   Wenyou Yang
• [PATCH v4 1/3] regulator: act8865: add PMIC act8865 driver   Wenyou Yang
• [PATCH v4 2/3] regulator: act8865: add device tree binding doc   Wenyou Yang
• [PATCH v4 3/3] ARM: dts: sama5d3xcm: add the regulator device node   Wenyou Yang
• [PATCH v4 1/3] regulator: act8865: add PMIC act8865 driver   Yang, Wenyou
• [PATCH v5 0/3] regulator: act8865: add PMIC driver   Wenyou Yang
• [PATCH v5 1/3] regulator: act8865: add PMIC act8865 driver   Wenyou Yang
• [PATCH v5 2/3] regulator: act8865: add device tree binding doc   Wenyou Yang
• [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator device node   Wenyou Yang
• [PATCH] regulator: act8865: register all regulators regardless of how many are used   Wenyou Yang
• [PATCH] regulator: act8865: fix incorrect devm_kzalloc for act8865   Wenyou Yang
• [PATCH] regulator: act8865: register all regulators regardless of how many are used   Yang, Wenyou
• [PATCH v2] regulator: act8865: register all regulators regardless of how many are used   Wenyou Yang
• [PATCH] the eDMA support for the LPUART send driver   Yuan Yao
• [PATCH 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH v3 0/6] Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH v3 1/6] pinctrl: Add void * to pinctrl_pin_desc   Sherman Yin
• [PATCH v3 2/6] pinctrl: Adds slew-rate, input-enable/disable   Sherman Yin
• [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig   Sherman Yin
• [PATCH v3 4/6] pinctrl: Add pinctrl binding for Broadcom Capri SoCs   Sherman Yin
• [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH v3 6/6] pinctrl: Enable pinctrl for Broadcom Capri SoCs   Sherman Yin
• [PATCH v3 4/6] pinctrl: Add pinctrl binding for Broadcom Capri SoCs   Sherman Yin
• [PATCH v3 4/6] pinctrl: Add pinctrl binding for Broadcom Capri SoCs   Sherman Yin
• [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH v4 0/6] Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH v4 1/4] pinctrl: Add void * to pinctrl_pin_desc   Sherman Yin
• [PATCH v4 2/4] pinctrl: Add pinctrl binding for Broadcom Capri SoCs   Sherman Yin
• [PATCH v4 3/4] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH v4 4/4] pinctrl: Enable pinctrl for Broadcom Capri SoCs   Sherman Yin
• [PATCH v3 3/6] pinctrl: Make PINCTRL selectable by defconfig/menuconfig   Sherman Yin
• [PATCH v3 5/6] ARM: pinctrl: Add Broadcom Capri pinctrl driver   Sherman Yin
• [PATCH -next] ARM: pxa: fix return value check in em_x270_sensor_init()   Wei Yongjun
• [PATCH -next] mmc: s3cmci: fix return value check in s3cmci_debugfs_attach()   Wei Yongjun
• [PATCH -next] spi: nuc900: remove redundant return value check of platform_get_resource()   Wei Yongjun
• [PATCH -next] spi: spi-s3c24xx: remove redundant return value check of platform_get_resource()   Wei Yongjun
• [PATCH] ARM: dts: imx6q-sabrelite: PHY reset is active-low   Philipp Zabel
• [PATCHv7 06/12] ARM: tegra: create a DT header defining SWGROUP ID   Mark Zhang
• [PATCH] arm: mm: add memory type for inner-writeback   Mark Zhang
• [RFC part1 PATCH 5/7] ARM64 / ACPI: Introduce arm_core.c and its related head file   Zheng, Lv
• Build warning in drivers/dma/mmp_tdma.c   Qiao Zhou
• Build warning in drivers/dma/mmp_tdma.c   Qiao Zhou
• Build warning in drivers/dma/mmp_tdma.c   Qiao Zhou
• Build warning in drivers/dma/mmp_tdma.c   Qiao Zhou
• Build warning in drivers/dma/mmp_tdma.c   Qiao Zhou
• Build warning in drivers/dma/mmp_tdma.c   Qiao Zhou
• Build warning in drivers/dma/mmp_tdma.c   Qiao Zhou
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Richard Zhu
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Richard Zhu
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Richard Zhu
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Richard Zhu
• [PATCH RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Richard Zhu
• [PATCH 2/7] [RFC] PCI: imx6: remove outbound io/mem ATU region mapping   Richard Zhu
• Build warning in drivers/dma/mmp_tdma.c   Haojian Zhuang
• [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver   Haojian Zhuang
• [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver   Haojian Zhuang
• [GIT PULL][v2] pull request for hisilicon soc   Haojian Zhuang
• [GIT PULL][v2] pull request for hisilicon soc   Haojian Zhuang
• [GIT PULL][for 3.14] pull request for hisilicon clock driver   Haojian Zhuang
• [PATCH] ARM: pxa: Remove unused variables   Haojian Zhuang
• [PATCH RESEND] arm: pxa: tosa: fix keys mapping   Haojian Zhuang
• [GIT PULL][for 3.14] pull request for hisilicon clock driver   Haojian Zhuang
• [GIT PULL][v2] pull request for hisilicon soc   Haojian Zhuang
• [PATCH] ARM: pxa: prevent PXA270 occasional reboot freezes   Haojian Zhuang
• [PATCH] clk: divider: read before write for HIWORD mask   Haojian Zhuang
• [PATCH] ARM: pxa: prevent PXA270 occasional reboot freezes   Haojian Zhuang
• [PATCH][RESEND] ARM: pxa: remove IRQF_DISABLED   Haojian Zhuang
• [PATCH v12 00/08] enable hisilicon hi3xxx SoC   Haojian Zhuang
• [PATCH v12 01/08] ARM: hi3xxx: add board support with device tree   Haojian Zhuang
• [PATCH v12 02/08] ARM: dts: enable hi4511 with device tree   Haojian Zhuang
• [PATCH v12 03/08] ARM: config: enable hi3xxx in multi_v7_defconfig   Haojian Zhuang
• [PATCH v12 04/08] ARM: config: add defconfig for Hi3xxx   Haojian Zhuang
• [PATCH v12 05/08] ARM: hi3xxx: add smp support   Haojian Zhuang
• [PATCH v12 06/08] ARM: hi3xxx: add hotplug support   Haojian Zhuang
• [PATCH v12 07/08] ARM: dts: enable clock binding on Hi3620   Haojian Zhuang
• [PATCH v12 08/08] ARM: hi3xxx: select GPIO in Kconfig   Haojian Zhuang
• [PATCH 01/02] clk: hi3620: fix wrong flags on divider   Haojian Zhuang
• [PATCH 02/02] clk: hi3620: add gate clock flag   Haojian Zhuang
• [GIT PULL][for 3.14] pull request from pxa   Haojian Zhuang
• [GIT PULL][for 3.14] pull request for mmp   Haojian Zhuang
• [GIT PULL v2][for 3.14] pull request for hisilicon clock   Haojian Zhuang
• [GIT PULL v3][for 3.14] pull request for hisilicon soc   Haojian Zhuang
• [PATCH] ARM: pxa: fix USB gadget driver compilation regression   Haojian Zhuang
• [GIT PULL v3][for 3.14] pull request for hisilicon soc   Haojian Zhuang
• [GIT PULL][for 3.14] pull request from pxa   Haojian Zhuang
• [GIT PULL][for 3.14] pull request from pxa   Haojian Zhuang
• [GIT PULL v4][for 3.14] pull request for hisilicon soc   Haojian Zhuang
• [PATCH 1/3] ARM: hisi: rename hi3xxx to hisi   Haojian Zhuang
• [PATCH 2/3] ARM: hisi: remove init_time   Haojian Zhuang
• [PATCH 3/3] ARM: dts: rename hi4511 dts file   Haojian Zhuang
• [GIT PULL v4][for 3.14] pull request for hisilicon soc   Haojian Zhuang
• [PATCH RESEND] clk: divider: read before write for HIWORD mask   Haojian Zhuang
• [GIT PULL][for 3.13] pull request on fix from pxa   Haojian Zhuang
• [PATCH v2 1/5] usb: dwc3: Add Keystone specific glue layer   Paul Zimmerman
• [PATCH v2 1/5] usb: dwc3: Add Keystone specific glue layer   Paul Zimmerman
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   Bartlomiej Zolnierkiewicz
• [PATCH V4 1/2] Phy: Exynos: Add Exynos5250 sata phy driver   Bartlomiej Zolnierkiewicz
• [PATCH V4 2/2] ARM: dts: Enable ahci sata and sata phy   Bartlomiej Zolnierkiewicz
• Can someone Ack and queue a patch for RTC subsytem?   Alessandro Zummo
• [rtc-linux] Re: Can someone Ack and queue a patch for RTC subsytem?   Alessandro Zummo
• Can someone Ack and queue a patch for RTC subsytem?   Alessandro Zummo
• Can someone Ack and queue a patch for RTC subsytem?   Alessandro Zummo
• Can someone Ack and queue a patch for RTC subsytem?   Alessandro Zummo
• Can someone Ack and queue a patch for RTC subsytem?   Alessandro Zummo
• [PATCH v2 2/2] ARM: sun4i/sun7i: RTC driver   Alessandro Zummo
• [REPOST PATCH] ARM: sunxi: stop timer from ticking before enabling interrupts   Marc Zyngier
• [REPOST PATCH] ARM: sunxi: stop timer from ticking before enabling interrupts   Marc Zyngier
• [RFC part2 PATCH 9/9] ACPI / GIC: Initialize GIC using the information in MADT   Marc Zyngier
• [RFC part2 PATCH 9/9] ACPI / GIC: Initialize GIC using the information in MADT   Marc Zyngier
• [RFC PATCH 0/2] arm64: Add support for 48-bit Physical Addresses   Marc Zyngier
• [PATCH] ARM/KVM: inject data abort on unhandled memory access   Marc Zyngier
• [PATCH v3 1/9] ARM: KVM: Allow creating the VGIC after VCPUs   Marc Zyngier
• [PATCH v3 2/9] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Marc Zyngier
• [PATCH v3 3/9] KVM: arm-vgic: Set base addr through device API   Marc Zyngier
• [PATCH v3 4/9] irqchip: arm-gic: Define additional MMIO offsets and masks   Marc Zyngier
• [PATCH v3 5/9] KVM: arm-vgic: Make vgic mmio functions more generic   Marc Zyngier
• [PATCH v3 6/9] KVM: arm-vgic: Add vgic reg access from dev attr   Marc Zyngier
• [PATCH v3 7/9] KVM: arm-vgic: Support unqueueing of LRs to the dist   Marc Zyngier
• [PATCH v3 8/9] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers   Marc Zyngier
• [PATCH v3 9/9] KVM: arm-vgic: Support CPU interface reg access   Marc Zyngier
• [PATCH 1/2 v2] arm/arm64: KVM: arch_timer: Initialize cntvoff at kvm_init   Marc Zyngier
• [PATCH 2/2 v3 RESEND] ARM/KVM: save and restore generic timer registers   Marc Zyngier
• [PATCH 2/2] ARM/ARM64: KVM: Forward PSCI SYSTEM_OFF and SYSTEM_RESET to user space   Marc Zyngier
• [RESEND PATCH v2] arm/arm64: kvm: Use virt_to_idmap instead of virt_to_phys for idmap mappings   Marc Zyngier
• [RFC PATCH] arm/arm64: KVM: allow the use of THP on 2MB aligned memslots   Marc Zyngier
• [PATCH v4] ARM/KVM: save and restore generic timer registers   Marc Zyngier
• [RFC PATCH] arm/arm64: KVM: allow the use of THP on 2MB aligned memslots   Marc Zyngier
• [PATCH] arm/arm64: KVM: relax the requirements of VMA alignment for THP   Marc Zyngier
• [PATCH] arm/arm64: KVM: relax the requirements of VMA alignment for THP   Marc Zyngier
• [PATCH RESEND] arm64: KVM: Add Kconfig option for max VCPUs per-Guest   Marc Zyngier
• [PATCH] arm64: KVM: Force undefined exception for Guest SMC intructions   Marc Zyngier
• [PATCH 02/10] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Marc Zyngier
• [PATCH 03/10] KVM: arm-vgic: Set base addr through device API   Marc Zyngier
• [PATCH 06/10] arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_put   Marc Zyngier
• [PATCH 07/10] KVM: arm-vgic: Add vgic reg access from dev attr   Marc Zyngier
• [PATCH 08/10] KVM: arm-vgic: Support unqueueing of LRs to the dist   Marc Zyngier
• [PATCH 00/10] Support VGIC save/restore using device control API   Marc Zyngier
• [PATCH v5] ARM/KVM: save and restore generic timer registers   Marc Zyngier
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Marc Zyngier
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Marc Zyngier
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Marc Zyngier
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Marc Zyngier
• [PATCH v3 0/2] PSCI system off and reset for KVM ARM/ARM64   Marc Zyngier
• [PATCH v2] arm: KVM: Don't return PSCI_INVAL if waitqueue is inactive   Marc Zyngier
• [PATCH v5 08/10] KVM: arm-vgic: Support unqueueing of LRs to the dist   Marc Zyngier
• [PATCH v5 00/10] Support VGIC save/restore using device control API   Marc Zyngier
• [PULL 00/15] KVM/{arm,arm64} updates for 3.14   Marc Zyngier
• [PATCH 01/15] arm/arm64: KVM: arch_timer: Initialize cntvoff at kvm_init   Marc Zyngier
• [PATCH 02/15] ARM/KVM: save and restore generic timer registers   Marc Zyngier
• [PATCH 03/15] ARM: KVM: Allow creating the VGIC after VCPUs   Marc Zyngier
• [PATCH 04/15] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Marc Zyngier
• [PATCH 05/15] KVM: arm-vgic: Set base addr through device API   Marc Zyngier
• [PATCH 06/15] irqchip: arm-gic: Define additional MMIO offsets and masks   Marc Zyngier
• [PATCH 07/15] KVM: arm-vgic: Make vgic mmio functions more generic   Marc Zyngier
• [PATCH 08/15] arm/arm64: kvm: Set vcpu->cpu to -1 on vcpu_put   Marc Zyngier
• [PATCH 09/15] KVM: arm-vgic: Add vgic reg access from dev attr   Marc Zyngier
• [PATCH 10/15] KVM: arm-vgic: Support unqueueing of LRs to the dist   Marc Zyngier
• [PATCH 11/15] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers   Marc Zyngier
• [PATCH 12/15] KVM: arm-vgic: Support CPU interface reg access   Marc Zyngier
• [PATCH 13/15] arm64: KVM: Add Kconfig option for max VCPUs per-Guest   Marc Zyngier
• [PATCH 14/15] arm64: KVM: Support X-Gene guest VCPU on APM X-Gene host   Marc Zyngier
• [PATCH 15/15] arm64: KVM: Force undefined exception for Guest SMC intructions   Marc Zyngier
• [PATCH 6/7] Input: pmic8xxx-keypad - Migrate to devm_* APIs   spamassassin system account
• [GIT PULL] socfpga fix for 3.13   dinguyen at altera.com
• [PATCHv3 0/4] socfpga: Enable SD/MMC support   dinguyen at altera.com
• [PATCHv3 1/4] clk: socfpga: Add a clock driver for SOCFPGA's system manager   dinguyen at altera.com
• [PATCHv3 2/4] arm: dts: Add a system manager compatible property   dinguyen at altera.com
• [PATCHv3 3/4] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific funcationality   dinguyen at altera.com
• [PATCHv3 4/4] arm: dts: Add support for SD/MMC on SOCFPGA   dinguyen at altera.com
• [PATCHv4 0/4] socfpga: Enable SD/MMC support   dinguyen at altera.com
• [PATCHv4 1/4] arm: dts: Add support for SD/MMC on SOCFPGA   dinguyen at altera.com
• [PATCHv4 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings   dinguyen at altera.com
• [PATCHv4 3/4] mmc: dw_mmc-socfpga: Remove the SOCFPGA specific platform for dw_mmc   dinguyen at altera.com
• [PATCHv4 4/4] ARM: socfpga_defconfig: enable SD/MMC support   dinguyen at altera.com
• [PATCH] clk: socfpga: Remove socfpga_init_clocks   dinguyen at altera.com
• [PATCHv5 0/4]socfpga: Enable SD/MMC support   dinguyen at altera.com
• [PATCHv5 1/4] arm: dts: Add support for SD/MMC on SOCFPGA   dinguyen at altera.com
• [PATCHv5 2/4] clk: socfpga: Add a hook for SD/MMC driver to control CIU clock settings   dinguyen at altera.com
• [PATCHv5 3/4] mmc: dw_mmc-socfpga: Remove the SOCFPGA specific platform for dw_mmc   dinguyen at altera.com
• [PATCHv5 4/4] ARM: socfpga_defconfig: enable SD/MMC support   dinguyen at altera.com
• [PATCH] clk: socfpga: Map the clk manager base address in the clock driver   dinguyen at altera.com
• [PATCHv2] clk: socfpga: Map the clk manager base address in the clock driver   dinguyen at altera.com
• [RESEND PATCH] clk: socfpga: Remove socfpga_init_clocks   dinguyen at altera.com
• [PATCHv6 0/5] socfpga: Enable SD/MMC support   dinguyen at altera.com
• [PATCHv6 1/5] mmc: dw_mmc: Add support to set the SDR and DDR timing through clock framework   dinguyen at altera.com
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   dinguyen at altera.com
• [PATCHv6 3/5] dts: socfpga: Add support for SD/MMC on the SOCFPGA platform   dinguyen at altera.com
• [PATCHv6 4/5] mmc: dw_mmc-socfpga: Remove the SOCFPGA specific platform for dw_mmc   dinguyen at altera.com
• [PATCHv6 5/5] ARM: socfpga_defconfig: enable SD/MMC support   dinguyen at altera.com
• [GIT PULL] clk: socfpga: Clean-ups for 3.14   dinguyen at altera.com
• [RESEND LIST PATCHv7 0/4] socfpga: Enable SD/MMC support   dinguyen at altera.com
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr, socfpga-gate-clk"   dinguyen at altera.com
• [RESEND LIST PATCHv7 2/4] dts: socfpga: Add support for SD/MMC on the SOCFPGA platform   dinguyen at altera.com
• [RESEND LIST PATCHv7 3/4] mmc: dw_mmc-socfpga: Remove the SOCFPGA specific platform for dw_mmc   dinguyen at altera.com
• [RESEND LIST PATCHv7 4/4] ARM: socfpga_defconfig: enable SD/MMC support   dinguyen at altera.com
• [PATCH] ARM: at91: add usart3 alias to dtsi   boris brezillon
• [PATCH v6 00/16] ARM: at91: move to common clk framework   boris brezillon
• [PATCH v2 1/2] clk: add clk accuracy retrieval support   boris brezillon
• [PATCH v2] ARM: at91: add usart3 alias to dtsi   boris brezillon
• [PATCH v6 00/16] ARM: at91: move to common clk framework   boris brezillon
• [PATCH] ARM: at91: add uart aliases to sama5d3 dtsi   boris brezillon
• [PATCH] ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT   boris brezillon
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   boris brezillon
• [PATCH 3/3] usb: ohci-at91: use device managed clk retrieval   boris brezillon
• [PATCH v4 1/3] usb: ohci-at91: replace request_mem_region + ioremap by devm_ioremap_resource   boris brezillon
• [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks   boris brezillon
• [PATCH 5/9] ARM: at91/dt: add mmc0 slot0 support to at91rm9200ek board   boris brezillon
• [PATCH] ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order   boris brezillon
• [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks   boris brezillon
• [PATCH v4 3/6] ARM: at91/dt: define sama5d3 clocks   boris brezillon
• [PATCH v4] usb: ohci-at91: fix irq and iomem resource retrieval   boris brezillon
• [PATCH v3 1/2] clk: add clk accuracy retrieval support   boris brezillon
• [PATCH v3 1/2] clk: add clk accuracy retrieval support   boris brezillon
• [PATCH v4 1/2] clk: add clk accuracy retrieval support   boris brezillon
• [PATCH] at91: ohci: fixed broken sanity check   boris brezillon
• [PATCH 0/6] Device Tree support for the at91sam9261ek   boris brezillon
• [PATCH 3/6] At91: dt: Added smc bus driver   boris brezillon
• pinctrl - detailed gpio-mode pinconf design   kevin.bracey at broadcom.com
• pinctrl - detailed gpio-mode pinconf design   kevin.bracey at broadcom.com
• pinctrl - detailed gpio-mode pinconf design   kevin.bracey at broadcom.com
• [PATCH 4/4] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Anson.Huang at freescale.com
• [PATCH V2 2/2] cpufreq: imx6q: correct VDDSOC/PU voltage scaling when cpufreq is changed   Anson.Huang at freescale.com
• [PATCH V3 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Anson.Huang at freescale.com
• [PATCH V3 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Anson.Huang at freescale.com
• [PATCH V3 1/2] ARM: imx: add vddsoc/pu setpoint info into dts   Anson.Huang at freescale.com
• imx6 power consumption   Anson.Huang at freescale.com
• [PATCH 2/3] thermal: imx: add necessary clk operation   Anson.Huang at freescale.com
• [PATCH 2/3] thermal: imx: add necessary clk operation   Anson.Huang at freescale.com
• [PATCH 2/3] thermal: imx: add necessary clk operation   Anson.Huang at freescale.com
• [PATCH V2 2/2] thermal: imx: add necessary clk operation   Anson.Huang at freescale.com
• [PATCH V4 3/3] cpufreq: imx6: Add device tree binding document   Anson.Huang at freescale.com
• [PATCH V3 2/2] thermal: imx: add necessary clk operation   Anson.Huang at freescale.com
• [PATCH V2] ARM: dts: imx6qdl-sabresd: Add power key support   Anson.Huang at freescale.com
• [PATCH] ARM: imx: improve the comment of CCM lpm SW workaround   Anson.Huang at freescale.com
• [PATCH] MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers   Hong-Xing.Zhu at freescale.com
• [RFCv2 endianess 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [RFCv2 endianess 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [RFCv2 endianess 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [RFCv2 endianess 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Li.Xiubo at freescale.com
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Li.Xiubo at freescale.com
• [PATCH 2/2] ASoC: sgtl5000: clean up sgtl5000_enable_regulators()   Li.Xiubo at freescale.com
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [PATCHv3 1/7] ALSA: Add SAI SoC Digital Audio Interface driver.   Li.Xiubo at freescale.com
• [PATCHv3 5/7] ASoC: fsl: Add SGTL5000 based audio machine driver.   Li.Xiubo at freescale.com
• [PATCHv3 5/7] ASoC: fsl: Add SGTL5000 based audio machine driver.   Li.Xiubo at freescale.com
• [PATCHv3 4/7] Documentation: Add device tree bindings for Freescale SAI.   Li.Xiubo at freescale.com
• [PATCHv6 1/4] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [PATCHv4 2/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Li.Xiubo at freescale.com
• [PATCHv4 2/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Li.Xiubo at freescale.com
• [PATCHv4 3/4] ARM: dts: Enable SAI ALSA SoC DAI device for Vybrid VF610 TOWER board.   Li.Xiubo at freescale.com
• [RFC] pwm: Add Freescale FTM PWM driver support   Li.Xiubo at freescale.com
• [PATCHv4 2/4] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610.   Li.Xiubo at freescale.com
• [PATCH V1 1/7] ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ   Ranjani.Vaidyanathan at freescale.com
• [PATCH] ARM: dts: vf610: make pinctrl nodes board specific   fugang.duan at freescale.com
• [PATCH] ARM: dts: vf610: make pinctrl nodes board specific   fugang.duan at freescale.com
• [PATCH 2/2] arm: nspire: modify device tree to use the nspire-usb driver   dt.tangr at gmail.com
• [PATCH 2/3] arm: nspire: modify device tree to use the lsi, zevio-usb driver   dt.tangr at gmail.com
• [PATCH 2/3] arm: nspire: modify device tree to use the LSI Zevio LED driver   dt.tangr at gmail.com
• [PATCH v6 0/3] AArch64: KGDB support   vijay.kilari at gmail.com
• [PATCH v6 1/3] AArch64: KGDB: Add Basic KGDB support   vijay.kilari at gmail.com
• [PATCH v6 2/3] AArch64: KGDB: Add step debugging support   vijay.kilari at gmail.com
• [PATCH v6 3/3] KGDB: make kgdb_breakpoint() as noinline   vijay.kilari at gmail.com
• [PATCH 1/2] ARM: imx28: add apf28 specific initialization (macaddr)   gwenhael.goavec
• [PATCH v2 00/10] Reuse davinci-nand driver for Keystone arch   ivan.khoronzhuk
• [PATCH 1/2] memory: ti-aemif: introduce AEMIF driver   ivan.khoronzhuk
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   ivan.khoronzhuk
• [PATCH v2] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   ivan.khoronzhuk
• [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core   ivan.khoronzhuk
• [PATCH v4 1/5] watchdog: davinci: change driver to use WDT core   ivan.khoronzhuk
• [PATCH v3] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   ivan.khoronzhuk
• [PATCH 2/2] memory: ti-aemif: add bindings for AEMIF driver   ivan.khoronzhuk
• [PATCH 1/2] arm: dts: keystone: add watchdog entry   ivan.khoronzhuk
• [PATCH 2/2] arm: keystone: enable watchdog support   ivan.khoronzhuk
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   ivan.khoronzhuk
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   ivan.khoronzhuk
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   ivan.khoronzhuk
• [PATCH 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   ivan.khoronzhuk
• [PATCH v3 1/9] mtd: nand: davinci: fix driver registration   ivan.khoronzhuk
• [PATCH v3 9/9] mtd: nand: davinci: don't request AEMIF address range   ivan.khoronzhuk
• [PATCH v3 7/9] mtd: nand: davinci: adjust DT properties to MTD generic   ivan.khoronzhuk
• [PATCH v4 0/9] Reuse davinci-nand driver for Keystone arch   ivan.khoronzhuk
• [PATCH v3] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   ivan.khoronzhuk
• [PATCH v2 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   ivan.khoronzhuk
• [PATCH v2 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   ivan.khoronzhuk
• [PATCH v3] ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif   ivan.khoronzhuk
• [PATCH v3 1/3] clocksource: timer-keystone: introduce clocksource driver for Keystone   ivan.khoronzhuk
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   sunil joshi
• [PATCH 1/2] ARM: EXYNOS: Support Suspend-to-RAM on EXYNOS5420   sunil joshi
• [PATCH RFC 08/10] net: stmmac:sti: Add STi SOC glue driver.   srinivas kandagatla
• [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller   srinivas kandagatla
• [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller   srinivas kandagatla
• [PATCH v3 01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework   srinivas kandagatla
• [PATCH v3 36/36] ARM: STi: Add support for the FSM Serial Flash Controller   srinivas kandagatla
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   srinivas kandagatla
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   srinivas kandagatla
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   srinivas kandagatla
• [PATCH 04/10] net: stmmac: sunxi platfrom extensions for GMAC in Allwinner A20 SoC's   srinivas kandagatla
• [GIT PULL] s3c64xx dmaengine conversion   kgene at kernel.org
• [PATCH 1/2] ARM: s3c24xx: get rid of custom <mach/gpio.h>   kgene at kernel.org
• [PATCH 01/11] ARM: EXYNOS: cleanup <mach/regs-pmu.h>   kgene at kernel.org
• [PATCH 02/11] ARM: EXYNOS: remove inclusion <mach/regs-pmu.h> into another headers   kgene at kernel.org
• [PATCH 03/11] ARM: EXYNOS: local regs-pmu.h header file   kgene at kernel.org
• [PATCH 04/11] ARM: EXYNOS: cleanup <mach/regs-irq.h>   kgene at kernel.org
• [PATCH 05/11] ARM: EXYNOS: cleanup <mach/regs-clock.h>   kgene at kernel.org
• [PATCH 06/11] PM / devfreq: move definitions for exynos4_bus into drivers/devfreq   kgene at kernel.org
• [PATCH 07/11] ARM: EXYNOS: local definitions for pm.c into mach-exynos dir   kgene at kernel.org
• [PATCH 08/11] cpufreq: exynos: move definitions for exynos-cpufreq into drivers/cpufreq/   kgene at kernel.org
• [PATCH 09/11] ARM: EXYNOS: local definitions for cpuidle.c into mach-exynos dir   kgene at kernel.org
• [PATCH 10/11] ARM: EXYNOS: remove <mach/regs-clock.h> for exynos   kgene at kernel.org
• [PATCH 11/11] PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>   kgene at kernel.org
• [PATCH 00/11] ARM: EXYNOS: cleanup <mach/regs-xxx.h>   kgene at kernel.org
• [GIT PULL 1/7] Samsung fixes for v3.14   kgene at kernel.org
• [GIT PULL 6/7] Samsung DT for v3.14   kgene at kernel.org
• Затем чтобы содеять милое и не спотыкнуться побывай к нам   kidalove
• U-boot [with DT] for R-Car H1 (R8A7779) Linux-3.10 backport from renesas-backport.git   srikanth krishnakar
• U-boot [with DT] for R-Car H1 (R8A7779) Linux-3.10 backport from renesas-backport.git   srikanth krishnakar
• [PATCH 10/12] SPEAr13xx: defconfig: Update   Rajeev kumar
• [PATCH 01/12] SPEAr13xx: Correct dt field name for stmmac phy-addr   Rajeev kumar
• [PATCH 01/12] SPEAr13xx: Correct dt field name for stmmac phy-addr   Rajeev kumar
• [PATCH 01/12] SPEAr13xx: Correct dt field name for stmmac phy-addr   Rajeev kumar
• [PATCH] arm/crash_dump.c: fix Oops caused by overflow converted from pfn to phys   ivan lam
• [PATCH v3 6/7] Documentation: add the binding file for Quadspi driver   thomas.langer at lantiq.com
• [PATCH v3 0/5] Hardware Reduced Mode Cleanup for ACPI   al.stone at linaro.org
• [PATCH v3 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   al.stone at linaro.org
• [PATCH v3 2/5] ACPI: bus master reload not supported in reduced HW mode   al.stone at linaro.org
• [PATCH v3 3/5] ACPI: HW reduced mode does not allow use of the FADT sci_interrupt field   al.stone at linaro.org
• [PATCH v3 4/5] ACPI: in HW reduced mode, using FADT PM information is not allowed.   al.stone at linaro.org
• [PATCH v3 5/5] ACPI: do not map/unmap memory regions for FADT entries in reduced HW mode   al.stone at linaro.org
• [PATCH v4 0/5] Hardware Reduced Mode Cleanup for ACPI   al.stone at linaro.org
• [PATCH v4 1/5] ACPI: introduce CONFIG_ACPI_REDUCED_HARDWARE to enable this ACPI mode   al.stone at linaro.org
• [PATCH v4 2/5] ACPI: bus master reload not supported in reduced HW mode   al.stone at linaro.org
• [PATCH v4 3/5] ACPI: HW reduced mode does not allow use of the FADT sci_interrupt field   al.stone at linaro.org
• [PATCH v4 4/5] ACPI: in HW reduced mode, using FADT PM information is not allowed.   al.stone at linaro.org
• [PATCH v4 5/5] ACPI: do not map/unmap memory regions for FADT entries in reduced HW mode   al.stone at linaro.org
• [PATCH 0/6] arm64:lib: the optimized string library routines for armv8 processors   zhichang.yuan at linaro.org
• [PATCH 1/6] arm64: lib: Implement optimized memcpy routine   zhichang.yuan at linaro.org
• [PATCH 2/6] arm64: lib: Implement optimized memmove routine   zhichang.yuan at linaro.org
• [PATCH 3/6] arm64: lib: Implement optimized memset routine   zhichang.yuan at linaro.org
• [PATCH 4/6] arm64: lib: Implement optimized memcmp routine   zhichang.yuan at linaro.org
• [PATCH 5/6] arm64: lib: Implement optimized string compare routines   zhichang.yuan at linaro.org
• [PATCH 6/6] arm64: lib: Implement optimized string length routines   zhichang.yuan at linaro.org
• [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode   maxime.ripard
• [linux-sunxi] Re: [PATCH 02/10] net: stmmac: Honor DT parameter to force DMA store and forward mode   maxime.ripard
• [PATCH] dma: imx: correct sdmac->status for cyclic dma tx   jiada_wang at mentor.com
• [PATCH] ARM:INTEGRATOR: Default enable ARM_PATCH_PHYS_VIRT, AUTO_ZRELADDR   panchaxari
• [PATCH CFT] ARM:MMP: Enable ARM_PATCH_PHYS_VIRT and ZRELADDR default   panchaxari
• [PATCH CFT] ARM:MSM: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR default   panchaxari
• [PATCH CFT] ARM:S5P64X0: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   panchaxari
• [PATCH CFT] ARM:S5PC100: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   panchaxari
• [PATCH CFT] ARM:S3C24XX: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   panchaxari
• [PATCH CFT] ARM:S3C64XX: Enable ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR by default   panchaxari
• [PATCH v2] extcon: gpio: Add power resume support   rjying
• Kernel 3.13-rc - DreamPlug compile failure - PHYS_OFFSET undeclared   robert
• Kernel 3.13-rc - DreamPlug compile failure - PHYS_OFFSET undeclared   robert
• Moschip MCS8142 SoC   mlweber1 at rockwellcollins.com
• MCS8142   mlweber1 at rockwellcollins.com
• Moschip MCS8142 SoC   mlweber1 at rockwellcollins.com
• [PATCH Resend 7/7] clk: max77686: Remove redundant break   jonghwa3.lee at samsung.com
• questions of cpuidle   anish singh
• [PATCH] ARM: multi_v7_defconfig: Fix STi support   srinivas.kandagatla at st.com
• [PATCH 0/6] Device Tree support for the at91sam9261ek   jjhiblot at traphandler.com
• [PATCH 1/6] Basic Device Tree support for the at91sam9261   jjhiblot at traphandler.com
• [PATCH 2/6] at91: dt: sam9261: Added support for the lcd display   jjhiblot at traphandler.com
• [PATCH 3/6] At91: dt: Added smc bus driver   jjhiblot at traphandler.com
• [PATCH 4/6] at91: dt: sam9261: Pinmux DT entries for the SMC/EBI interface   jjhiblot at traphandler.com
• [PATCH 5/6] at91: dt: sam9261: Add an entry in the DT for the SMC/EBI bus driver.   jjhiblot at traphandler.com
• [PATCH 6/6] at91: dt: sam9261: Added DM9000 in the device tree   jjhiblot at traphandler.com
• [PATCH] at91: ohci: fixed broken sanity check   jjhiblot at traphandler.com
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 3/3] clk: hisilicon: add hi3620_mmc_clks   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCHv6 1/5] mmc: dw_mmc: Add support to set the SDR and DDR timing through clock framework   zhangfei
• [PATCHv6 2/5] clk: socfpga: Add a clock type for the SD/MMC driver   zhangfei
• [PATCHv6 1/5] mmc: dw_mmc: Add support to set the SDR and DDR timing through clock framework   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk"   zhangfei
• [RESEND LIST PATCHv7 1/4] clk: socfpga: Add a clk-phase property to the "altr,socfpga-gate-clk"   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 2/3] mmc: dw_mmc: add dw_mmc-k3 for k3 platform   zhangfei
• [PATCH 1/6] arm64: lib: Implement optimized memcpy routine   zhichang.yuan
• [PATCH 3/6] arm64: lib: Implement optimized memset routine   zhichang.yuan