[PATCH] omap: twl-common: Fix musb-hdrc device name.

[Kishon Vijay Abraham I]

Hi,

On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote:
> Without this change when booting omap3 device (gta04) with board file
> leads to follwing errors:
> 
> [    1.203308] musb-hdrc musb-hdrc.0.auto: unable to find phy
> [    1.209075] HS USB OTG: no transceiver configured
> [    1.214019] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
> 
> and usb isn't working.
> 
> This is probably regression caused by commit: 6c27f939

I think a better fix would be to have this merged..
https://lkml.org/lkml/2013/7/26/91
> 
> Signed-off-by: Marek Belisko <marek.belisko at open-nandra.com>
> ---
>  arch/arm/mach-omap2/twl-common.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
> index b0d54da..3640ce0 100644
> --- a/arch/arm/mach-omap2/twl-common.c
> +++ b/arch/arm/mach-omap2/twl-common.c
> @@ -92,7 +92,7 @@ void __init omap_pmic_late_init(void)
>  
>  #if defined(CONFIG_ARCH_OMAP3)
>  struct phy_consumer consumers[] = {
> -	PHY_CONSUMER("musb-hdrc.0", "usb"),
> +	PHY_CONSUMER("musb-hdrc.0.auto", "usb"),

the index '0' might vary for some boards leading it to again break musb.

Thanks
Kishon