[PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings

[Troy Kisky]

Don't use 0x80000000 to get default pad settings.

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index be899d3..b548647 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -114,13 +114,13 @@
 	imx6q-sabrelite {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-/* uSDHC4 CD  */		MX6QDL_PAD_NANDF_D6__GPIO2_IO06	0x80000000
-/* spi-nor CS */		MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x80000000
-/* otg power en */		MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x80000000
-/* ethernet phy reset */	MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
-/* USDHC3 CD  */		MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x80000000
-/* USDHC3 WP  */		MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x1f0b0
-/* SGTL5000 sys_mclk  */	MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x80000000
+/* uSDHC4 CD  */		MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0
+/* spi-nor CS */		MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+/* otg power en */		MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+/* ethernet phy reset */	MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
+/* USDHC3 CD  */		MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+/* USDHC3 WP  */		MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0
+/* SGTL5000 sys_mclk  */	MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
 			>;
 		};
 
-- 
1.8.1.2