[PATCH] omap: twl-common: Fix musb-hdrc device name.
marek.belisko at gmail.com
Mon Dec 9 02:35:11 EST 2013
On Thu, Dec 5, 2013 at 7:43 PM, Tony Lindgren <tony at atomide.com> wrote:
> * Belisko Marek <marek.belisko at gmail.com> [131203 01:21]:
>> On Tue, Dec 3, 2013 at 10:08 AM, Belisko Marek <marek.belisko at gmail.com> wrote:
>> > Hi,
>> > On Tue, Dec 3, 2013 at 9:58 AM, Kishon Vijay Abraham I <kishon at ti.com> wrote:
>> >> Hi,
>> >> On Tuesday 03 December 2013 02:03 PM, Marek Belisko wrote:
>> >>> Without this change when booting omap3 device (gta04) with board file
>> >>> leads to follwing errors:
>> >>> [ 1.203308] musb-hdrc musb-hdrc.0.auto: unable to find phy
>> >>> [ 1.209075] HS USB OTG: no transceiver configured
>> >>> [ 1.214019] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
>> >>> and usb isn't working.
>> >>> This is probably regression caused by commit: 6c27f939
>> >> I think a better fix would be to have this merged..
>> >> https://lkml.org/lkml/2013/7/26/91
>> > Yes I see but how this could help with current situation? Ho you then
>> > specify device number?
>> I was too fast with reply sorry. I can see whole series and it is of
>> course correct solution. But as I said
>> can we except to be merged to 3.13. If not Tony can you pick my patch.
> If it's a regression, then let's get it merged for the -rc cycle.
Yes it is regression and without that usb on most omap3 based boards
without DT will not work.
> So please try to follow up on getting the proper fix merged, meanwhile
> I'll mark this thread as read. If you need this one merged for some
> reason, then please report to get it back to my radar.
as simple and primitive as possible
Marek Belisko - OPEN-NANDRA
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
More information about the linux-arm-kernel