[PATCH 3/5] ARM: dts: sun5i: Add new sun5i-a13-olinuxino-micro board

[Hans de Goede]

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 66 +++++++++++++++++++++++++
 2 files changed, 67 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d57c1a6..b663ed7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -255,6 +255,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
 	sun4i-a10-hackberry.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
 	sun6i-a31-colombus.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 0000000..26df7e8
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard at free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a13.dtsi"
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	soc at 01c00000 {
+		pinctrl at 01c20800 {
+			led_pins_olinuxinom: led_pins at 0 {
+				allwinner,pins = "PG9";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart1: serial at 01c28400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins_b>;
+			status = "okay";
+		};
+
+		i2c0: i2c at 01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c at 01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c at 01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		power {
+			gpios = <&pio 6 9 0>;
+			default-state = "on";
+		};
+	};
+};
-- 
1.8.4.2