[PATCH 1/2] ARM: dts: bcm281xx: Add i2c busses

Tim Kryger tim.kryger at linaro.org
Fri Dec 6 18:45:27 EST 2013


Add the DTS nodes for all the i2c busses in the SoC.

Signed-off-by: Tim Kryger <tim.kryger at linaro.org>
Reviewed-by: Christian Daudt <csd at broadcom.com>
Reviewed-by: Matt Porter <matt.porter at linaro.org>
Reviewed-by: Markus Mayer <markus.mayer at linaro.org>
---
 arch/arm/boot/dts/bcm11351.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 1246885..4bfd7e3 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -146,6 +146,46 @@
 		status = "disabled";
 	};
 
+	i2c at 3e016000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc1_clk>;
+		status = "disabled";
+	};
+
+	i2c at 3e017000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc2_clk>;
+		status = "disabled";
+	};
+
+	i2c at 3e018000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bsc3_clk>;
+		status = "disabled";
+	};
+
+	i2c at 3500d000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3500d000 0x80>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&pmu_bsc_clk>;
+		status = "disabled";
+	};
+
 	clocks {
 		bsc1_clk: bsc1 {
 			compatible = "fixed-clock";
-- 
1.8.0.1




More information about the linux-arm-kernel mailing list