[PATCH 1/2] ARM: dts: bcm281xx: Add i2c busses

[Christian Daudt]

On Fri, Dec 6, 2013 at 3:45 PM, Tim Kryger <tim.kryger at linaro.org> wrote:
> Add the DTS nodes for all the i2c busses in the SoC.
>
> Signed-off-by: Tim Kryger <tim.kryger at linaro.org>
> Reviewed-by: Christian Daudt <csd at broadcom.com>
> Reviewed-by: Matt Porter <matt.porter at linaro.org>
> Reviewed-by: Markus Mayer <markus.mayer at linaro.org>
> ---
>  arch/arm/boot/dts/bcm11351.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
> index 1246885..4bfd7e3 100644
> --- a/arch/arm/boot/dts/bcm11351.dtsi
> +++ b/arch/arm/boot/dts/bcm11351.dtsi
> @@ -146,6 +146,46 @@
>                 status = "disabled";
>         };
>
> +       i2c at 3e016000 {
> +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> +               reg = <0x3e016000 0x80>;
> +               interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               clocks = <&bsc1_clk>;
> +               status = "disabled";
> +       };
> +
> +       i2c at 3e017000 {
> +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> +               reg = <0x3e017000 0x80>;
> +               interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               clocks = <&bsc2_clk>;
> +               status = "disabled";
> +       };
> +
> +       i2c at 3e018000 {
> +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> +               reg = <0x3e018000 0x80>;
> +               interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               clocks = <&bsc3_clk>;
> +               status = "disabled";
> +       };
> +
> +       i2c at 3500d000 {
> +               compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
> +               reg = <0x3500d000 0x80>;
> +               interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               clocks = <&pmu_bsc_clk>;
> +               status = "disabled";
> +       };
> +
>         clocks {
>                 bsc1_clk: bsc1 {
>                         compatible = "fixed-clock";
> --
> 1.8.0.1
>
Applied to armsoc/for-3.14/dt
 thanks,
  csd