[PATCH V4 1/2] Phy: Exynos: Add Exynos5250 sata phy driver
Kishon Vijay Abraham I
kishon at ti.com
Tue Dec 31 05:48:51 EST 2013
Hi Yuvaraj,
On Monday 30 December 2013 06:37 PM, Yuvaraj Kumar C D wrote:
> This patch adds the sata phy driver for Exynos5250.Exynos5250 sata
> phy comprises of CMU and TRSV blocks which are of I2C register Map.
> So this patch also adds a i2c client driver, which is used configure
> the CMU and TRSV block of exynos5250 SATA PHY.
>
> This patch incorporates the generic phy framework to deal with sata
> phy.
>
> This patch depends on the below patches
> [1].drivers: phy: add generic PHY framework
> by Kishon Vijay Abraham I<kishon at ti.com>
> [2].ata: ahci_platform: Manage SATA PHY
> by Roger Quadros <rogerq at ti.com>
>
> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd at samsung.com>
> Signed-off-by: Girish K S <ks.giri at samsung.com>
> Signed-off-by: Vasanth Ananthan <vasanth.a at samsung.com>
> ---
> Changes from V3:
> 1.Moved devm_phy_create before to devm_phy_provider_register.
>
> Changes from V2:
> 1.Removed of_match_table
> 2.Moved to syscon interface for PMU handling.
>
> Changes from V1:
> 1.Adapted to latest version of Generic PHY framework
> 2.Removed exynos_sata_i2c_remove function.
>
>
> drivers/phy/Kconfig | 11 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/exynos5250_phy_i2c.c | 44 ++++++++
> drivers/phy/sata_phy_exynos5250.c | 220 +++++++++++++++++++++++++++++++++++++
> drivers/phy/sata_phy_exynos5250.h | 35 ++++++
> 5 files changed, 311 insertions(+)
> create mode 100644 drivers/phy/exynos5250_phy_i2c.c
> create mode 100644 drivers/phy/sata_phy_exynos5250.c
> create mode 100644 drivers/phy/sata_phy_exynos5250.h
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index d0611b8..6ea124d 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -57,4 +57,15 @@ config PHY_EXYNOS_DP_VIDEO
> help
> Support for Display Port PHY found on Samsung EXYNOS SoCs.
>
> +config EXYNOS5250_SATA_PHY
> + tristate "Exynos5250 Sata SerDes/PHY driver"
> + depends on SOC_EXYNOS5250
> + select GENERIC_PHY
> + select MFD_SYSCON if ARCH_EXYNOS5
> + help
> + Enable this to support SATA SerDes/Phy found on Samsung's
> + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
> + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds.It supports one SATA host
> + port to accept one SATA device.
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 4e4adc9..b73eb73 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> +obj-$(CONFIG_EXYNOS5250_SATA_PHY) += sata_phy_exynos5250.o exynos5250_phy_i2c.o
> diff --git a/drivers/phy/exynos5250_phy_i2c.c b/drivers/phy/exynos5250_phy_i2c.c
> new file mode 100644
> index 0000000..c0c1150
> --- /dev/null
> +++ b/drivers/phy/exynos5250_phy_i2c.c
> @@ -0,0 +1,44 @@
> +/*
> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
> + * Author:
> + * Yuvaraj C D <yuvaraj.cd at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include "sata_phy_exynos5250.h"
> +
> +static int exynos_sata_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *i2c_id)
> +{
> + int ret = 0;
> + ret = sataphy_attach_i2c_client(client);
> + if (ret < 0)
> + return ret;
> +
> + dev_info(&client->adapter->dev,
> + "attached %s into sataphy i2c adapter successfully\n",
> + client->name);
> +
> + return ret;
> +}
> +
> +static const struct i2c_device_id sataphy_i2c_device_match[] = {
> + { "exynos-sataphy-i2c", 0 },
> +};
> +
> +struct i2c_driver sataphy_i2c_driver = {
> + .probe = exynos_sata_i2c_probe,
> + .id_table = sataphy_i2c_device_match,
> + .driver = {
> + .name = "exynos-sataphy-i2c",
> + .owner = THIS_MODULE,
> + },
> +};
> diff --git a/drivers/phy/sata_phy_exynos5250.c b/drivers/phy/sata_phy_exynos5250.c
> new file mode 100644
> index 0000000..0765863
> --- /dev/null
> +++ b/drivers/phy/sata_phy_exynos5250.c
> @@ -0,0 +1,220 @@
> +/*
> + * Samsung SATA SerDes(PHY) driver
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Authors: Girish K S <ks.giri at samsung.com>
> + * Yuvaraj Kumar C D <yuvaraj.cd at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/spinlock.h>
> +#include <linux/mfd/syscon.h>
> +#include "sata_phy_exynos5250.h"
> +
> +static struct i2c_client *phy_i2c_client;
> +
> +struct exynos_sata_phy {
> + struct phy *phy;
> + struct clk *phyclk;
> + void __iomem *regs;
> + void __iomem *pmureg;
> +};
> +
> +static bool wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit,
> + u32 status)
> +{
> + unsigned long timeout = jiffies + usecs_to_jiffies(1000);
> + while (time_before(jiffies, timeout)) {
> + if ((readl(base + reg) & checkbit) == status)
> + return true;
> + }
> + return false;
> +}
> +
> +int sataphy_attach_i2c_client(struct i2c_client *sata_phy)
> +{
> + if (!sata_phy)
> + return -EPROBE_DEFER;
> + else
> + phy_i2c_client = sata_phy;
> +
> + return 0;
> +}
> +
> +static int exynos_sata_phy_power_on(struct phy *phy)
> +{
> + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
> +
> + if (sata_phy->pmureg)
> + regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
> + EXYNOS5_SATAPHY_PMU_ENABLE, EXYNOS_SATA_PHY_EN);
> +
> + return 0;
> +}
> +
> +static int exynos_sata_phy_power_off(struct phy *phy)
> +{
> + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
> +
> + if (sata_phy->pmureg)
> + regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
> + EXYNOS5_SATAPHY_PMU_ENABLE, ~EXYNOS_SATA_PHY_EN);
> +
> + return 0;
> +}
> +
> +static int exynos_sata_phy_init(struct phy *phy)
> +{
> + u32 val = 0;
> + int ret = 0;
> + u8 buf[] = { 0x3A, 0x0B };
> + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
> +
> + if (sata_phy->pmureg)
> + regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
> + EXYNOS5_SATAPHY_PMU_ENABLE, EXYNOS_SATA_PHY_EN);
> +
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val |= 0xFF;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val |= LINK_RESET;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val |= RESET_CMN_RST_N;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
> + val &= ~PHCTRLM_REF_RATE;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
> +
> + /* High speed enable for Gen3 */
> + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
> + val |= PHCTRLM_HIGH_SPEED;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
> +
> + val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0);
> +
> + writel(0x2, sata_phy->regs + EXYNOS5_SATA_MODE0);
> +
> + ret = i2c_master_send(phy_i2c_client, buf, sizeof(buf));
> + if (ret < 0)
> + return -ENXIO;
> +
> + /* release cmu reset */
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val &= ~RESET_CMN_RST_N;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
> + val |= RESET_CMN_RST_N;
> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
> +
> + return (wait_for_reg_status(sata_phy->regs, EXYNOS5_SATA_PHSATA_STATM,
> + PHSTATM_PLL_LOCKED, 1)) ? 0 : -EINVAL;
> +
> +}
> +
> +static struct phy_ops exynos_sata_phy_ops = {
> + .init = exynos_sata_phy_init,
> + .power_on = exynos_sata_phy_power_on,
> + .power_off = exynos_sata_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int exynos_sata_phy_probe(struct platform_device *pdev)
> +{
> + struct exynos_sata_phy *sata;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + struct phy_provider *phy_provider;
> + int ret = 0;
> +
> + sata = devm_kzalloc(dev, sizeof(*sata), GFP_KERNEL);
> + if (!sata)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + sata->regs = devm_ioremap_resource(dev, res);
> + if (IS_ERR(sata->regs))
> + return PTR_ERR(sata->regs);
> +
> + sata->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "samsung,syscon-phandle");
> + if (!sata->pmureg) {
> + dev_err(dev, "syscon regmap lookup failed.\n");
> + return PTR_ERR(sata->pmureg);
> + }
> + dev_set_drvdata(dev, sata);
> +
> + if (i2c_add_driver(&sataphy_i2c_driver)) {
> + dev_err(dev, "failed to register sataphy i2c driver\n");
> + return -ENOENT;
> + }
> +
> + sata->phyclk = devm_clk_get(dev, "sata_phyctrl");
> + if (IS_ERR(sata->phyclk)) {
> + dev_err(dev, "failed to get clk for PHY\n");
> + return PTR_ERR(sata->phyclk);
> + }
> +
> + ret = clk_prepare_enable(sata->phyclk);
> + if (ret < 0) {
> + dev_err(dev, "failed to enable source clk\n");
> + return ret;
> + }
> +
> + sata->phy = devm_phy_create(dev, &exynos_sata_phy_ops, NULL);
> + if (IS_ERR(sata->phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(sata->phy);
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev,
> + of_phy_simple_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR(phy_provider);
> +
> + phy_set_drvdata(sata->phy, sata);
huh.. phy_provider_register should be after phy_set_drvdata.
Cheers
Kishon
More information about the linux-arm-kernel
mailing list