[PATCH 2/2] ASoC: sam9x5_wm8731: change to work in DSP A mode

[Richard Genoud]

On 04/12/2013 03:37, Bo Shen wrote:
> Change sam9x5 with wm8731 work in DSP A mode, this will fix the
> left/right channel swap issue.
> 
> Signed-off-by: Bo Shen <voice.shen at atmel.com>
> ---
>  sound/soc/atmel/sam9x5_wm8731.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c
> index 992ae38..06c1811 100644
> --- a/sound/soc/atmel/sam9x5_wm8731.c
> +++ b/sound/soc/atmel/sam9x5_wm8731.c
> @@ -107,7 +107,7 @@ static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
>  	dai->stream_name = "WM8731 PCM";
>  	dai->codec_dai_name = "wm8731-hifi";
>  	dai->init = sam9x5_wm8731_init;
> -	dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
> +	dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF
>  		| SND_SOC_DAIFMT_CBM_CFM;
>  
>  	ret = snd_soc_of_parse_card_name(card, "atmel,model");
> 
Tested-by: Richard Genoud <richard.genoud at gmail.com>
on at91sam9g35-ek with 3.12-rc2 + "ASoC: wm8731: fix dsp mode configuration"


Thanks !