[PATCH v7 8/9] phy: add Broadcom Kona USB2 PHY driver

[Kishon Vijay Abraham I]

Hi Felipe,

On Wednesday 18 December 2013 09:55 PM, Felipe Balbi wrote:
> On Tue, Dec 17, 2013 at 02:42:35PM -0500, Matt Porter wrote:
>> Add a driver for the internal Broadcom Kona USB 2.0 PHY found
>> on the BCM281xx family of SoCs.
>>
>> Signed-off-by: Matt Porter <mporter at linaro.org>
> 
> Kishon, are you ok with this driver ?

yeah. Since this patch touches phy/Kconfig (and Makefile) and there is one more
PHY driver to be merged that also modifies Kconfig there might be conflicts. So
thought I should be taking this patch?
> 
>> +static int bcm_kona_usb2_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct bcm_kona_usb *phy;
>> +	struct resource *res;
>> +	struct phy *gphy;
>> +	struct phy_provider *phy_provider;
>> +
>> +	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
>> +	if (!phy)
>> +		return -ENOMEM;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	phy->regs = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(phy->regs))
>> +		return PTR_ERR(phy->regs);
>> +
>> +	platform_set_drvdata(pdev, phy);
>> +
>> +	phy_provider = devm_of_phy_provider_register(dev,
>> +			of_phy_simple_xlate);
>> +	if (IS_ERR(phy_provider))
>> +		return PTR_ERR(phy_provider);
>> +
>> +	gphy = devm_phy_create(dev, &ops, NULL);
>> +	if (IS_ERR(gphy))
>> +		return PTR_ERR(gphy);
>> +
>> +	/* The Kona PHY supports an 8-bit wide UTMI interface */
>> +	phy_set_bus_width(gphy, 8);
>> +
>> +	phy_set_drvdata(gphy, phy);
> 
> I think this set_drvdata() should be done before registering the
> provider, no ?

hmm, right.

Thanks
Kishon