[PATCH] ARM: OMAP2+: Remove unused platform init code and headers
Tony Lindgren
tony at atomide.com
Sat Dec 7 18:49:11 EST 2013
After converting mach-omap2 to boot with device tree only,
we can now remove some more unused platform init code and
headers:
- omap4-keypad related functions are no longer needed with
with device tree
- board-rx51.h and hsmmc.h are now unused, and board-rx51.c
has some unneded headers
- serial.h is no longer needed
- i2c_dev_attr is now set in the driver based on the
compatible flag, and fifo_depth is unused
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
This depends on all the previously posted patches to make mach-omap2
to boot in device tree mode only.
diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c
index c88d8df7..9a1e826 100644
--- a/arch/arm/mach-omap2/am33xx-restart.c
+++ b/arch/arm/mach-omap2/am33xx-restart.c
@@ -5,8 +5,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
-#include <linux/reboot.h>
#include "common.h"
#include "prm-regbits-33xx.h"
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index aead77a..fed5783 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -17,7 +17,6 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/stddef.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
@@ -26,13 +25,9 @@
#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
#include "common.h"
#include "mmc.h"
#include "soc.h"
-#include "gpmc-onenand.h"
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
diff --git a/arch/arm/mach-omap2/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h
deleted file mode 100644
index b76f49e..0000000
--- a/arch/arm/mach-omap2/board-rx51.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Defines for rx51 boards
- */
-
-#ifndef _OMAP_BOARD_RX51_H
-#define _OMAP_BOARD_RX51_H
-
-extern void __init rx51_peripherals_init(void);
-extern void __init rx51_video_mem_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index a3040a4..d211edd 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -28,18 +28,12 @@
#include <linux/irq.h>
#include <linux/delay.h>
-#include <linux/i2c.h>
#include <linux/i2c/twl.h>
#include <linux/i2c-omap.h>
#include <linux/reboot.h>
#include <asm/proc-fns.h>
-#include "i2c.h"
-#include "serial.h"
-
-#include "usb.h"
-
#define OMAP_INTC_START NR_IRQS
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 8e85fa0..3d22e8a 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -18,7 +18,6 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/omap4-keypad.h>
#include <linux/platform_data/mailbox-omap.h>
#include <asm/mach-types.h>
@@ -29,7 +28,6 @@
#include "iomap.h"
#include "omap_hwmod.h"
#include "omap_device.h"
-#include "omap4-keypad.h"
#include "soc.h"
#include "common.h"
@@ -251,36 +249,6 @@ static inline void omap_init_camera(void)
#endif
}
-int __init omap4_keyboard_init(struct omap4_keypad_platform_data
- *sdp4430_keypad_data, struct omap_board_data *bdata)
-{
- struct platform_device *pdev;
- struct omap_hwmod *oh;
- struct omap4_keypad_platform_data *keypad_data;
- unsigned int id = -1;
- char *oh_name = "kbd";
- char *name = "omap4-keypad";
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return -ENODEV;
- }
-
- keypad_data = sdp4430_keypad_data;
-
- pdev = omap_device_build(name, id, oh, keypad_data,
- sizeof(struct omap4_keypad_platform_data));
-
- if (IS_ERR(pdev)) {
- WARN(1, "Can't build omap_device for %s:%s.\n",
- name, oh->name);
- return PTR_ERR(pdev);
- }
-
- return 0;
-}
-
#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
deleted file mode 100644
index 7f2e790..0000000
--- a/arch/arm/mach-omap2/hsmmc.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-struct mmc_card;
-
-struct omap2_hsmmc_info {
- u8 mmc; /* controller 1/2/3 */
- u32 caps; /* 4/8 wires and any additional host
- * capabilities OR'd (ref. linux/mmc/host.h) */
- u32 pm_caps; /* PM capabilities */
- bool transceiver; /* MMC-2 option */
- bool ext_clock; /* use external pin for input clock */
- bool cover_only; /* No card detect - just cover switch */
- bool nonremovable; /* Nonremovable e.g. eMMC */
- bool power_saving; /* Try to sleep or power off when possible */
- bool no_off; /* power_saving and power is not to go off */
- bool no_off_init; /* no power off when not in MMC sleep state */
- bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
- bool deferred; /* mmc needs a deferred probe */
- int gpio_cd; /* or -EINVAL */
- int gpio_wp; /* or -EINVAL */
- char *name; /* or NULL for default */
- struct platform_device *pdev; /* mmc controller instance */
- int ocr_mask; /* temporary HACK */
- int max_freq; /* maximum clock, if constrained by external
- * circuitry, or 0 for default */
- /* Remux (pad configuration) when powering on/off */
- void (*remux)(struct device *dev, int slot, int power_on);
- /* init some special card */
- void (*init_card)(struct mmc_card *card);
-};
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-void omap_hsmmc_init(struct omap2_hsmmc_info *);
-void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
-
-#else
-
-static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info)
-{
-}
-
-static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h
index 42b6f2e..f76ff79 100644
--- a/arch/arm/mach-omap2/i2c.h
+++ b/arch/arm/mach-omap2/i2c.h
@@ -24,19 +24,6 @@
#ifndef __MACH_OMAP2_I2C_H
#define __MACH_OMAP2_I2C_H
-/**
- * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
- * @fifo_depth: total controller FIFO size (in bytes)
- * @flags: differences in hardware support capability
- *
- * @fifo_depth represents what exists on the hardware, not what is
- * actually configured at runtime by the device driver.
- */
-struct omap_i2c_dev_attr {
- u8 fifo_depth;
- u32 flags;
-};
-
int omap_i2c_reset(struct omap_hwmod *oh);
#endif /* __MACH_OMAP2_I2C_H */
diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h
deleted file mode 100644
index 7ca1fcf..0000000
--- a/arch/arm/mach-omap2/include/mach/serial.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar at ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE 0x4806a000
-#define OMAP2_UART2_BASE 0x4806c000
-#define OMAP2_UART3_BASE 0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE 0x49020000
-#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE 0x48020000
-#define OMAP4_UART4_BASE 0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE 0x48020000
-#define TI81XX_UART2_BASE 0x48022000
-#define TI81XX_UART3_BASE 0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE 0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE 0x48066000
-#define OMAP5_UART6_BASE 0x48068000
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE 0x10000000
-#define ZOOM_UART_VIRT 0xfa400000
-
-#define OMAP_PORT_SHIFT 2
-#define ZOOM_PORT_SHIFT 1
-
-#define OMAP24XX_BASE_BAUD (48000000/16)
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
- struct omap_uart_port_info *platform_data);
-#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 88b1d5d..aec3153 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -41,7 +41,6 @@
#include "omap-pm.h"
#include "sdrc.h"
#include "control.h"
-#include "serial.h"
#include "sram.h"
#include "cm2xxx.h"
#include "cm3xxx.h"
diff --git a/arch/arm/mach-omap2/omap4-keypad.h b/arch/arm/mach-omap2/omap4-keypad.h
deleted file mode 100644
index 20de0d5..0000000
--- a/arch/arm/mach-omap2/omap4-keypad.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-
-struct omap_board_data;
-
-extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
- struct omap_board_data *);
-#endif
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 2f15979..a49c88d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -29,7 +29,6 @@
#include "prm-regbits-24xx.h"
#include "i2c.h"
#include "mmc.h"
-#include "serial.h"
#include "wd_timer.h"
/*
@@ -98,13 +97,6 @@ static struct omap_hwmod_class i2c_class = {
.reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_NO_FIFO |
- OMAP_I2C_FLAG_SIMPLE_CLOCK |
- OMAP_I2C_FLAG_16BIT_DATA_REG |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
/* I2C1 */
static struct omap_hwmod omap2420_i2c1_hwmod = {
.name = "i2c1",
@@ -119,7 +111,6 @@ static struct omap_hwmod omap2420_i2c1_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
/*
* From mach-omap2/pm24xx.c: "Putting MPU into the WFI state
* while a transfer is active seems to cause the I2C block to
@@ -142,7 +133,6 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
.flags = HWMOD_16BIT_REG,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 6d1b609..f068bb5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -76,12 +76,6 @@ static struct omap_hwmod_class i2c_class = {
.reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
- OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
-};
-
/* I2C1 */
static struct omap_hwmod omap2430_i2c1_hwmod = {
.name = "i2c1",
@@ -105,7 +99,6 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
};
/* I2C2 */
@@ -123,7 +116,6 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
};
/* gpio5 */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 656861c..e2a46b7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -16,7 +16,6 @@
#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
-#include "serial.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 0f17862..7165836 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -695,10 +695,6 @@ static struct omap_hwmod_class i2c_class = {
.reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
/* i2c1 */
struct omap_hwmod am33xx_i2c1_hwmod = {
.name = "i2c1",
@@ -711,7 +707,6 @@ struct omap_hwmod am33xx_i2c1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c1 */
@@ -726,7 +721,6 @@ struct omap_hwmod am33xx_i2c2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c3 */
@@ -741,7 +735,6 @@ struct omap_hwmod am33xx_i2c3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 9fbc3c1..0477131 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -39,7 +39,6 @@
#include "i2c.h"
#include "mmc.h"
#include "wd_timer.h"
-#include "serial.h"
/*
* OMAP3xxx hardware module integration data
@@ -742,11 +741,6 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
};
/* I2C1 */
-static struct omap_i2c_dev_attr i2c1_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -761,15 +755,9 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c1_dev_attr,
};
/* I2C2 */
-static struct omap_i2c_dev_attr i2c2_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -784,17 +772,9 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c2_dev_attr,
};
/* I2C3 */
-static struct omap_i2c_dev_attr i2c3_dev_attr = {
- .fifo_depth = 64, /* bytes */
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-
-
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
@@ -809,7 +789,6 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = {
},
},
.class = &i2c_class,
- .dev_attr = &i2c3_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 1e5b12c..ddbf696 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1327,10 +1327,6 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
.reset = &omap_i2c_reset,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
/* i2c1 */
static struct omap_hwmod omap44xx_i2c1_hwmod = {
.name = "i2c1",
@@ -1345,7 +1341,6 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c2 */
@@ -1362,7 +1357,6 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c3 */
@@ -1379,7 +1373,6 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c4 */
@@ -1396,7 +1389,6 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 9e08d69..5027611 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -615,11 +615,6 @@ static struct omap_hwmod_class omap54xx_i2c_hwmod_class = {
.rev = OMAP_I2C_IP_VERSION_2,
};
-/* i2c dev_attr */
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
/* i2c1 */
static struct omap_hwmod omap54xx_i2c1_hwmod = {
.name = "i2c1",
@@ -634,7 +629,6 @@ static struct omap_hwmod omap54xx_i2c1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c2 */
@@ -651,7 +645,6 @@ static struct omap_hwmod omap54xx_i2c2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c3 */
@@ -668,7 +661,6 @@ static struct omap_hwmod omap54xx_i2c3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c4 */
@@ -685,7 +677,6 @@ static struct omap_hwmod omap54xx_i2c4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c5 */
@@ -702,7 +693,6 @@ static struct omap_hwmod omap54xx_i2c5_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index db32d53..9b9d9d5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -848,11 +848,6 @@ static struct omap_hwmod_class dra7xx_i2c_hwmod_class = {
.rev = OMAP_I2C_IP_VERSION_2,
};
-/* i2c dev_attr */
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE,
-};
-
/* i2c1 */
static struct omap_hwmod dra7xx_i2c1_hwmod = {
.name = "i2c1",
@@ -867,7 +862,6 @@ static struct omap_hwmod dra7xx_i2c1_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c2 */
@@ -884,7 +878,6 @@ static struct omap_hwmod dra7xx_i2c2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c3 */
@@ -901,7 +894,6 @@ static struct omap_hwmod dra7xx_i2c3_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c4 */
@@ -918,7 +910,6 @@ static struct omap_hwmod dra7xx_i2c4_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/* i2c5 */
@@ -935,7 +926,6 @@ static struct omap_hwmod dra7xx_i2c5_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .dev_attr = &i2c_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
deleted file mode 100644
index c4014f0..0000000
--- a/arch/arm/mach-omap2/serial.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <mach/serial.h>
More information about the linux-arm-kernel
mailing list