[PATCH v4 0/6] ARM: at91: use new at91 clks for samad3 SoCs

[Nicolas Ferre]

On 28/11/2013 15:49, Boris BREZILLON :
> Hello,
>
> This patch series moves sama5d3 SoCs and boards to the new at91 clk framework
> (based on common clk framework).
>
> Best Regards,

Whole series:
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

and added on top of CCF one for at91-3.14-cleanup

Bye,

> Boris
>
> Changes since v3:
>   - fix prog clks declaration
>
> Changes since v2:
>   - rework dt bindings:
>     * replace "atmel,clk-id" property by the standard "reg" property
>     * reference system, peripheral and programmable clks using the direct
>       clk node instead of the parent node plus a clk id
>   - add usb_clk to usb ehci controller node
>
> Changes since v1:
>   - remove references to peripheral id macros
>   - remove old clk definitions after moving to new clk framework
>
> Boris BREZILLON (6):
>    ARM: at91: prepare sama5 dt boards transition to common clk
>    ARM: at91: prepare common clk transition for sama5d3 SoC
>    ARM: at91/dt: define sama5d3 clocks
>    ARM: at91/dt: define sama5d3xek's main clk frequency
>    ARM: at91: move sama5d3 SoC to common clk
>    ARM: at91/dt: remove old clk material
>
>   arch/arm/boot/dts/sama5d3.dtsi      |  379 ++++++++++++++++++++++++++++++++++-
>   arch/arm/boot/dts/sama5d3_can.dtsi  |   20 ++
>   arch/arm/boot/dts/sama5d3_emac.dtsi |   11 +
>   arch/arm/boot/dts/sama5d3_gmac.dtsi |   11 +
>   arch/arm/boot/dts/sama5d3_lcd.dtsi  |   17 ++
>   arch/arm/boot/dts/sama5d3_mci2.dtsi |   12 ++
>   arch/arm/boot/dts/sama5d3_tcb1.dtsi |   12 ++
>   arch/arm/boot/dts/sama5d3_uart.dtsi |   21 ++
>   arch/arm/boot/dts/sama5d3xcm.dtsi   |   17 +-
>   arch/arm/mach-at91/Kconfig          |    1 -
>   arch/arm/mach-at91/board-dt-sama5.c |   10 +-
>   arch/arm/mach-at91/sama5d3.c        |  342 -------------------------------
>   12 files changed, 497 insertions(+), 356 deletions(-)
>


-- 
Nicolas Ferre