[PATCH] ARM: dts: omap3: split pinctrl for core into two parts
Nishanth Menon
nm at ti.com
Thu Dec 12 20:02:39 EST 2013
3430 TRM(SWPU222W) states that control core module padconf
registers have ranges:
0x48002030 to 0x48002264(CONTROL_PADCONF_SDRC_CKE1)
0x480025D8(CONTROL_PADCONF_ETK_CLK) to 0x480025F8.
AM3517 TRM(SPRUGR0C) states that control core module padconf
registers has a single range:
0x48002030 to 0x48002264(CONTROL_PADCONF_SDRC_CKE1)
3630 TRM(SWPU176AB) states that control core module padconf
registers have ranges:
0x48002030 to 0x48002264(CONTROL_PADCONF_SDRC_CKE1)
0x480025A0(CONTROL_PADCONF_SDRC_BA0) to 0x480025F8
We currently map 0x48002030 to 0x480025F8 resulting in the bug
reported in [1].
To fix this, we split this into a another pinctrl device region
specific to the SoC. update board files that get impacted with this
change to ensure bisectability is maintained.
[1] http://marc.info/?l=linux-omap&m=138689141531466&w=2
Reported-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Applies on v3.13-rc3
Tested on the following platform:
Beagle-XM (OMAP3630): http://pastebin.mozilla.org/3764783
CraneBoard(AM3517): http://pastebin.mozilla.org/3764784
SDP3430 (OMAP3430): http://pastebin.mozilla.org/3764786
I have not been able to test function impacted by this, but I applied
the following delta for the impacted padconfs I could find:
3430: -0x5A8
3630: -0x570
The other option would be to modify pinctrl-single driver to accept multiple
reg ranges for the same device, which I think was not the intent
arch/arm/boot/dts/omap3-beagle-xm.dts | 24 +++++++++++++++-----
arch/arm/boot/dts/omap3-beagle.dts | 24 +++++++++++++++-----
arch/arm/boot/dts/omap3-igep.dtsi | 3 +++
arch/arm/boot/dts/omap3-igep0020.dts | 40 +++++++++++++++++++--------------
arch/arm/boot/dts/omap3-igep0030.dts | 2 +-
arch/arm/boot/dts/omap3.dtsi | 2 +-
arch/arm/boot/dts/omap34xx.dtsi | 13 +++++++++++
arch/arm/boot/dts/omap36xx.dtsi | 11 +++++++++
8 files changed, 88 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index df33a50..2a9508b 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -96,6 +96,24 @@
};
};
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins2
+ >;
+
+ hsusbb2_pins: pinmux_hsusbb2_pins {
+ pinctrl-single,pins = <
+ 0x050 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ 0x052 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ 0x054 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ 0x056 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ 0x058 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ 0x05a (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
+
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
@@ -111,12 +129,6 @@
hsusbb2_pins: pinmux_hsusbb2_pins {
pinctrl-single,pins = <
- 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
- 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
- 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
- 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
- 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
- 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 3ba4a62..7b9e418 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -90,6 +90,24 @@
};
};
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins2
+ >;
+
+ hsusbb2_pins2: pinmux_hsusbb2_pins2 {
+ pinctrl-single,pins = <
+ 0x018 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ 0x01a (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ 0x01c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ 0x01e (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ 0x020 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ 0x022 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
+
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
@@ -98,12 +116,6 @@
hsusbb2_pins: pinmux_hsusbb2_pins {
pinctrl-single,pins = <
- 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
- 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
- 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
- 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
- 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
- 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 165aaf7..e608b46 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -134,6 +134,9 @@
>;
};
+};
+
+&omap3_pmx_core2 {
leds_pins: pinmux_leds_pins { };
};
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 1c7e74d..e6723c5 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -67,26 +67,32 @@
pinctrl-names = "default";
pinctrl-0 = <
&hsusbb1_pins
- &tfp410_pins
- &dss_pins
>;
hsusbb1_pins: pinmux_hsusbb1_pins {
pinctrl-single,pins = <
- 0x5aa (PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
- 0x5a8 (PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
- 0x5bc (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
- 0x5be (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
- 0x5ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
- 0x5ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
- 0x5b0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
- 0x5b2 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
- 0x5b4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
- 0x5b6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
- 0x5b8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
- 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
+ 0x03a (PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
+ 0x038 (PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
+ 0x04c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
+ 0x04e (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
+ 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
+ 0x03e (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
+ 0x040 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
+ 0x042 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
+ 0x044 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
+ 0x046 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
+ 0x048 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
+ 0x04a (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
>;
};
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &tfp410_pins
+ &dss_pins
+ >;
tfp410_pins: tfp410_dvi_pins {
pinctrl-single,pins = <
@@ -130,9 +136,9 @@
&leds_pins {
pinctrl-single,pins = <
- 0x5c4 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
- 0x5c6 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
- 0x5c8 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+ 0x054 (PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+ 0x056 (PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+ 0x058 (PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
>;
};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 02a23f8..e9372f3 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -48,7 +48,7 @@
&leds_pins {
pinctrl-single,pins = <
- 0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ 0x040 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
>;
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index daabf99..427395c 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -117,7 +117,7 @@
omap3_pmx_core: pinmux at 48002030 {
compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002030 0x05cc>;
+ reg = <0x48002030 0x0238>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 5355d61..77d1246 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -25,4 +25,17 @@
clock-latency = <300000>; /* From legacy driver */
};
};
+
+ ocp {
+ omap3_pmx_core2: pinmux at 480025d8 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025d8 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 380c22e..b7c7bd9 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -38,5 +38,16 @@
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
+
+ omap3_pmx_core2: pinmux at 480025a0 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025a0 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
};
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list