[PATCH][RESEND] ARM: SAMSUNG: remove IRQF_DISABLED

[Michael Opdenacker]

This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.

Signed-off-by: Michael Opdenacker <michael.opdenacker at free-electrons.com>
Reviewed-by: Jingoo Han <jg1.han at samsung.com>
---
 arch/arm/mach-s3c24xx/dma.c         | 2 +-
 arch/arm/mach-s3c24xx/simtec-usb.c  | 3 +--
 arch/arm/mach-s3c64xx/mach-smartq.c | 2 +-
 3 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c
index 4a65cba3295d..a8dafc174fe3 100644
--- a/arch/arm/mach-s3c24xx/dma.c
+++ b/arch/arm/mach-s3c24xx/dma.c
@@ -742,7 +742,7 @@ int s3c2410_dma_request(enum dma_ch channel,
 		chan->irq_claimed = 1;
 		local_irq_restore(flags);
 
-		err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
+		err = request_irq(chan->irq, s3c2410_dma_irq, 0,
 				  client->name, (void *)chan);
 
 		local_irq_save(flags);
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index 2ed2e32430dc..bb3eac6a7697 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -78,8 +78,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
 
 	if (on) {
 		ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
-				  IRQF_DISABLED | IRQF_TRIGGER_RISING |
-				   IRQF_TRIGGER_FALLING,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				  "USB Over-current", info);
 		if (ret != 0) {
 			printk(KERN_ERR "failed to request usb oc irq\n");
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index a6b338fd0470..08a889c141da 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -106,7 +106,7 @@ static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
 
 	if (on) {
 		ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
-				  smartq_usb_host_ocirq, IRQF_DISABLED |
+				  smartq_usb_host_ocirq,
 				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				  "USB host overcurrent", info);
 		if (ret != 0)
-- 
1.8.3.2