[PATCH v7 10/14] usb: phy-mxs: add controller id

[Peter Chen]

On Tue, Dec 24, 2013 at 10:25:17AM +0800, Shawn Guo wrote:
> On Tue, Dec 24, 2013 at 09:34:47AM +0800, Peter Chen wrote:
> > On Tue, Dec 24, 2013 at 10:08:28AM +0800, Shawn Guo wrote:
> > > On Fri, Dec 20, 2013 at 03:52:06PM +0800, Peter Chen wrote:
> > > > It is used to access un-regulator registers according to
> > > > different controllers.
> > > > 
> > > > Signed-off-by: Peter Chen <peter.chen at freescale.com>
> > > > ---
> > > >  drivers/usb/phy/phy-mxs-usb.c |    8 ++++++++
> > > >  1 files changed, 8 insertions(+), 0 deletions(-)
> > > > 
> > > > diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> > > > index f28bdd8..09ece2b 100644
> > > > --- a/drivers/usb/phy/phy-mxs-usb.c
> > > > +++ b/drivers/usb/phy/phy-mxs-usb.c
> > > > @@ -111,6 +111,7 @@ struct mxs_phy {
> > > >  	struct clk *clk;
> > > >  	const struct mxs_phy_data *data;
> > > >  	struct regmap *regmap_anatop;
> > > > +	int port_id;
> > > >  };
> > > >  
> > > >  static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
> > > > @@ -237,6 +238,13 @@ static int mxs_phy_probe(struct platform_device *pdev)
> > > >  		return -ENOMEM;
> > > >  	}
> > > >  
> > > > +	ret = of_alias_get_id(np, "usbphy");
> > > > +	if (ret < 0) {
> > > > +		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
> > > > +		return ret;
> > > > +	}
> > > 
> > > It has the same compatibility issue with an old DTB.  In case the alias
> > > is not found, we should keep driver work in the existing way rather than
> > > failing out.
> > > 
> > 
> > Thanks, will change.
> > 
> > Do the two DTS patches are ok?
> 
> Yes.  And with the DTS change being optional to kernel driver, the DTS
> and driver changes can be merged independently through two trees.  So
> I just applied those two DTS patches.
> 

Including doc update or not?

-- 

Best Regards,
Peter Chen