[PATCH 05/11] serial: support for 16550 serial ports on LP-8x4x
Sergei Ianovich
ynvich at gmail.com
Sun Dec 1 01:26:18 EST 2013
The patch adds support for 3 additional LP-8x4x built-in serial
ports.
The device can also host up to 8 extension cards with 4 serial ports
on each card for a total of 35 ports. However, I don't have
the hardware to test extension cards, so they are not supported, yet.
Signed-off-by: Sergei Ianovich <ynvich at gmail.com>
---
arch/arm/configs/lp8x4x_defconfig | 1 +
arch/arm/mach-pxa/include/mach/lp8x4x.h | 6 ++
drivers/tty/serial/8250/8250_lp8x4x.c | 181 ++++++++++++++++++++++++++++++++
drivers/tty/serial/8250/Kconfig | 11 ++
drivers/tty/serial/8250/Makefile | 1 +
5 files changed, 200 insertions(+)
create mode 100644 drivers/tty/serial/8250/8250_lp8x4x.c
diff --git a/arch/arm/configs/lp8x4x_defconfig b/arch/arm/configs/lp8x4x_defconfig
index 03c85bc..d297a67 100644
--- a/arch/arm/configs/lp8x4x_defconfig
+++ b/arch/arm/configs/lp8x4x_defconfig
@@ -1141,6 +1141,7 @@ CONFIG_SERIAL_8250_NR_UARTS=36
CONFIG_SERIAL_8250_RUNTIME_UARTS=36
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_LP8X4X=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
diff --git a/arch/arm/mach-pxa/include/mach/lp8x4x.h b/arch/arm/mach-pxa/include/mach/lp8x4x.h
index a49df22..4d5474e 100644
--- a/arch/arm/mach-pxa/include/mach/lp8x4x.h
+++ b/arch/arm/mach-pxa/include/mach/lp8x4x.h
@@ -50,6 +50,12 @@
#define LP8X4X_CLRFALLINT LP8X4X_P2V(0x1700901a)
#define LP8X4X_RWRTC LP8X4X_P2V(0x1700901c)
#define LP8X4X_SRAMBANK 0x1700901e
+#define LP8X4X_TTYS0_QUIRK 0x17009030
+#define LP8X4X_TTYS1_QUIRK 0x17009032
+#define LP8X4X_TTYS2_QUIRK 0x17009034
+#define LP8X4X_TTYS0_IOMEM 0x17009050
+#define LP8X4X_TTYS1_IOMEM 0x17009060
+#define LP8X4X_TTYS2_IOMEM 0x17009070
#define LP8X4X_SRAM 0x1700a000
/* board specific IRQs */
diff --git a/drivers/tty/serial/8250/8250_lp8x4x.c b/drivers/tty/serial/8250/8250_lp8x4x.c
new file mode 100644
index 0000000..27b01f0b
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_lp8x4x.c
@@ -0,0 +1,181 @@
+/* linux/drivers/tty/serial/8250/8250_lp8x4x.c
+ *
+ * Support for 16550 serial ports on ICP DAS LP-8x4x
+ *
+ * Copyright (C) 2013 Sergei Ianovich <ynvich at gmail.com>
+ * Framework taken from linux/drivers/tty/serial/8250/8250_accent.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/serial_8250.h>
+#include <mach/lp8x4x.h>
+#include <linux/io.h>
+
+#define QUIRK_PORT(_base, _irq) \
+ { \
+ .iobase = _base, \
+ .membase = (void *) _base, \
+ .mapbase = _base, \
+ .irq = _irq, \
+ .uartclk = 14745600, \
+ .regshift = 1, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_IOREMAP, \
+ .set_termios = lp8x4x_set_termios, \
+ .serial_in = lp8x4x_serial_in, \
+ .serial_out = lp8x4x_serial_out, \
+ }
+
+static void lp8x4x_set_termios(struct uart_port *port,
+ struct ktermios *termios, struct ktermios *old)
+{
+ unsigned int len;
+ unsigned int baud;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ len = 7;
+ break;
+ case CS6:
+ len = 8;
+ break;
+ case CS7:
+ len = 9;
+ break;
+ default:
+ case CS8:
+ len = 10;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ len++;
+ if (termios->c_cflag & PARENB)
+ len++;
+ if (!(termios->c_cflag & PARODD))
+ len++;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ len++;
+#endif
+
+ len -= 9;
+ len &= 3;
+ len <<= 3;
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ port->uartclk / 16);
+ switch (baud) {
+ case 2400:
+ len |= 1;
+ case 4800:
+ len |= 2;
+ case 19200:
+ len |= 4;
+ case 38400:
+ len |= 5;
+ case 57600:
+ len |= 6;
+ case 115200:
+ len |= 7;
+ case 9600:
+ default:
+ len |= 3;
+ };
+ iowrite8(len, port->private_data);
+
+ serial8250_do_set_termios(port, termios, old);
+}
+
+static unsigned int lp8x4x_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int b;
+ udelay(30);
+ offset = offset << p->regshift;
+ b = readb(p->membase + offset);
+ return b;
+}
+
+static void lp8x4x_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static struct plat_serial8250_port lp8x4x_data[] = {
+ QUIRK_PORT(LP8X4X_TTYS0_IOMEM, LP8X4X_TTYS0_IRQ),
+ QUIRK_PORT(LP8X4X_TTYS1_IOMEM, LP8X4X_TTYS1_IRQ),
+ QUIRK_PORT(LP8X4X_TTYS2_IOMEM, LP8X4X_TTYS2_IRQ),
+ { },
+};
+
+/* Total number of ports can be 35. The first 3 ports are on
+ * the device, the rest are on extension slots. Only the first 3
+ * require termios quirk */
+#define LP8X4X_QUIRK_PORTS 3
+
+static unsigned int extra_mem[LP8X4X_QUIRK_PORTS] = {
+ LP8X4X_TTYS0_QUIRK,
+ LP8X4X_TTYS1_QUIRK,
+ LP8X4X_TTYS2_QUIRK
+};
+
+static int request_and_remap(int i)
+{
+ if (!request_mem_region(extra_mem[i], 1, "serial"))
+ return -EBUSY;
+
+ lp8x4x_data[i].private_data = ioremap(extra_mem[i], 1);
+ if (lp8x4x_data[i].private_data)
+ return 0;
+
+ release_mem_region(extra_mem[i], 1);
+ return -ENODEV;
+}
+
+static void release_and_unmap(int i)
+{
+ iounmap((void *) lp8x4x_data[i].private_data);
+ release_mem_region(extra_mem[i], 1);
+}
+
+static struct platform_device lp8x4x_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_ACCENT,
+ .dev = {
+ .platform_data = lp8x4x_data,
+ },
+};
+
+static int __init lp8x4x_init(void)
+{
+ int i = 0;
+ int err = 0;
+
+ for (i = 0; i < LP8X4X_QUIRK_PORTS; i++) {
+ err = request_and_remap(i);
+ if (err == 0)
+ continue;
+
+ for (; i >= 0; i--)
+ release_and_unmap(i);
+ lp8x4x_device.dev.platform_data = NULL;
+ return err;
+ }
+ return platform_device_register(&lp8x4x_device);
+}
+
+module_init(lp8x4x_init);
+
+MODULE_AUTHOR("Sergei Ianovich");
+MODULE_DESCRIPTION("8250 serial port module for LP-8x4x");
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index f3b306e..30b9af4 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -237,6 +237,17 @@ config SERIAL_8250_HUB6
To compile this driver as a module, choose M here: the module
will be called 8250_hub6.
+config SERIAL_8250_LP8X4X
+ tristate "Support 8250 ports on ICP DAS LP-8x4x"
+ depends on SERIAL_8250 != n && SERIAL_8250_MANY_PORTS && MACH_LP8X4X
+ help
+ In addition on serial ports on PXA270 SoC, LP-8x4x has 1 dual
+ RS232/RS485 port, 1 RS485 port and 1 RS232 port serial ports.
+
+ Say N here, unless you plan to run this kernel on a LP-8x4x system.
+
+ If you choose M, the module will be called 8250_lp8x4x.
+
#
# Misc. options/drivers.
#
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 36d68d0..451c558 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
+obj-$(CONFIG_SERIAL_8250_LP8X4X) += 8250_lp8x4x.o
obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
--
1.8.4.2
More information about the linux-arm-kernel
mailing list