i.MX6/PCIe and MSI interrupts

[Marek Vasut]

On Friday, December 06, 2013 at 03:15:50 PM, Jürgen Beisert wrote:
> Hi Harro,
> 
> On Friday 06 December 2013 13:39:09 Harro Haan wrote:
> > [...]
> > Attached are my patches of the first attempt to get MSI working for
> > the i.MX6. It looks like MSI is working but MSIX is not in combination
> > with e1000e and SabreSD. I did some successful iperf tests in MSI
> > mode. I did the following hack in
> > drivers/net/ethernet/intel/e1000e/param.c to disable MSIX:
> > 
> > -		if (adapter->flags & FLAG_HAS_MSIX) {
> > +		if (!(adapter->flags & FLAG_HAS_MSIX)/*TEMP*/) {
> 
> Arrrgh, after applying this change it starts to work immediately. So many
> hours...
> 
> > My MSI tests are not successful when testing it with a Xilinx PCIe
> > development board, while this FPGA design works properly with FSL
> > imx_3.0.35 (or on x86).
> 
> Same here. Network chip works with MSI, PCIe FPGA does not.

Can you try patch from Message-ID: <20131210043409.GA2734 at pratyush-vbox> ?

Best regards,
Marek Vasut