[PATCH 4/6] ARM: dts: i.MX27: Add missing pullup settings for SDHC pin groups

[Alexander Shiyan]

Signed-off-by: Alexander Shiyan <shc_work at mail.ru>
---
 arch/arm/boot/dts/imx27-pingrp.h | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/imx27-pingrp.h b/arch/arm/boot/dts/imx27-pingrp.h
index 61eb710..57ca02f 100644
--- a/arch/arm/boot/dts/imx27-pingrp.h
+++ b/arch/arm/boot/dts/imx27-pingrp.h
@@ -101,28 +101,28 @@
 	MX27_PAD_PWMO__PWMO 0x0
 
 #define MX27_SDHC1_PINGRP1 \
-	MX27_PAD_SD1_CLK__SD1_CLK \
-	MX27_PAD_SD1_CMD__SD1_CMD \
-	MX27_PAD_SD1_D0__SD1_D0 \
-	MX27_PAD_SD1_D1__SD1_D1 \
-	MX27_PAD_SD1_D2__SD1_D2 \
-	MX27_PAD_SD1_D3__SD1_D3
+	MX27_PAD_SD1_CLK__SD1_CLK 0x0 \
+	MX27_PAD_SD1_CMD__SD1_CMD 0x0 \
+	MX27_PAD_SD1_D0__SD1_D0 0x0 \
+	MX27_PAD_SD1_D1__SD1_D1 0x0 \
+	MX27_PAD_SD1_D2__SD1_D2 0x0 \
+	MX27_PAD_SD1_D3__SD1_D3 0x0
 
 #define MX27_SDHC2_PINGRP1 \
-	MX27_PAD_SD2_CLK__SD2_CLK \
-	MX27_PAD_SD2_CMD__SD2_CMD \
-	MX27_PAD_SD2_D0__SD2_D0 \
-	MX27_PAD_SD2_D1__SD2_D1 \
-	MX27_PAD_SD2_D2__SD2_D2 \
-	MX27_PAD_SD2_D3__SD2_D3
+	MX27_PAD_SD2_CLK__SD2_CLK 0x0 \
+	MX27_PAD_SD2_CMD__SD2_CMD 0x0 \
+	MX27_PAD_SD2_D0__SD2_D0 0x0 \
+	MX27_PAD_SD2_D1__SD2_D1 0x0 \
+	MX27_PAD_SD2_D2__SD2_D2 0x0 \
+	MX27_PAD_SD2_D3__SD2_D3 0x0
 
 #define MX27_SDHC3_PINGRP1 \
-	MX27_PAD_SD3_CLK__SD3_CLK \
-	MX27_PAD_SD3_CMD__SD3_CMD \
-	MX27_PAD_SD3_D0__SD3_D0 \
-	MX27_PAD_SD3_D1__SD3_D1 \
-	MX27_PAD_SD3_D2__SD3_D2 \
-	MX27_PAD_SD3_D3__SD3_D3
+	MX27_PAD_SD3_CLK__SD3_CLK 0x0 \
+	MX27_PAD_SD3_CMD__SD3_CMD 0x0 \
+	MX27_PAD_SD3_D0__SD3_D0 0x0 \
+	MX27_PAD_SD3_D1__SD3_D1 0x0 \
+	MX27_PAD_SD3_D2__SD3_D2 0x0 \
+	MX27_PAD_SD3_D3__SD3_D3 0x0
 
 #define MX27_UART1_PINGRP1 \
 	MX27_PAD_UART1_TXD__UART1_TXD 0x0 \
-- 
1.8.3.2