[PATCH 00/11] ARM: support for ICP DAS LP-8x4x
Sergei Ianovich
ynvich at gmail.com
Sun Dec 1 01:26:13 EST 2013
ICP DAS calls LP-8x4x 'programmable automation controller'. It is
an industrial computer based on PXA270 SoC. They ship it with a 2.6.19
kernel and proprietary kernel module and userspace library to access its
industrial IO.
This patch series allows to boot the device with a modern kernel. It adds
support for:
* FPGA irq chip
* MMC card interface on PXA270
* USB 1.1 port on PXA270
* 2 NOR flash devices
* VGA interface on PXA270
* 2 onboard ethernet Davicom DM9000 devices
* 3 serial UART ports on PXA270
* DS1302 RTC
* 512kiB SRAM with double battery-backup
* 3 built-in 16550 serial UART ports
* industrial IO parallel bus
* serial interface for digital and analog industrial IO modules on
parallel bus (any I-870xx series)
* digital and analog industrial IO modules for parallel bus:
* I-8024 (analog output)
* I-8041 (digital output)
* I-8042 (digital input-output)
Sergei Ianovich (11):
resolve PXA<->8250 serial device address conflict
arm: pxa27x: support ICP DAS LP-8x4x
rtc: support DS1302 RTC on ICP DAS LP-8x4x
mtd: support BB SRAM on ICP DAS LP-8x4x
serial: support for 16550 serial ports on LP-8x4x
misc: support for LP-8x4x custom parallel bus
misc: support for serial slots in LP-8x4x
misc: support for parallel slots in LP-8x4x
misc: support for I-8041 in LP-8x4x
misc: support for I-8042 in LP-8x4x
misc: support for I-8024 in LP-8x4x
Documentation/misc-devices/lp8x4x_bus.txt | 74 +
arch/arm/configs/lp8x4x_defconfig | 2324 +++++++++++++++++++++++++++++
arch/arm/mach-pxa/Kconfig | 8 +
arch/arm/mach-pxa/Makefile | 1 +
arch/arm/mach-pxa/include/mach/lp8x4x.h | 95 ++
arch/arm/mach-pxa/lp8x4x.c | 557 +++++++
drivers/misc/Kconfig | 12 +
drivers/misc/Makefile | 1 +
drivers/misc/lp8x4x_bus.c | 581 ++++++++
drivers/mtd/devices/Kconfig | 13 +
drivers/mtd/devices/Makefile | 1 +
drivers/mtd/devices/lp8x4x_sram.c | 229 +++
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-ds1302.c | 85 ++
drivers/tty/serial/8250/8250_lp8x4x.c | 181 +++
drivers/tty/serial/8250/Kconfig | 11 +
drivers/tty/serial/8250/Makefile | 1 +
drivers/tty/serial/Kconfig | 19 +
drivers/tty/serial/pxa.c | 22 +-
19 files changed, 4212 insertions(+), 5 deletions(-)
create mode 100644 Documentation/misc-devices/lp8x4x_bus.txt
create mode 100644 arch/arm/configs/lp8x4x_defconfig
create mode 100644 arch/arm/mach-pxa/include/mach/lp8x4x.h
create mode 100644 arch/arm/mach-pxa/lp8x4x.c
create mode 100644 drivers/misc/lp8x4x_bus.c
create mode 100644 drivers/mtd/devices/lp8x4x_sram.c
create mode 100644 drivers/tty/serial/8250/8250_lp8x4x.c
--
1.8.4.2
More information about the linux-arm-kernel
mailing list