[PATCH v5 3/3] ARM: tegra: correct Colibri T20 regulator settings

[Stephen Warren]

On 12/06/2013 05:51 AM, Stefan Agner wrote:
> Set the parent of the regulators LDO2 to LDO9 according to the
> schematic. Set the base voltage to 3.3V, there is only 3.3V on the
> module itself.
> 
> Set the Core and CPU voltage to the specified voltages of 1.2V and
> 1.0V respectivly.
> 
> LDO6 should deliver 2.85V. The attached peripherals were not in
> use so far.

I've applied patch 3/3 only to Tegra's for-3.14/dt branch.