[PATCH] ARM64: dts: Add clock-frequency to model cpu nodes

[Mark Brown]

From: Mark Brown <broonie at linaro.org>

The clock-frequency property is meaningless for the models but it's a
mandatory property so claim that all the cores run at 1MHz.

Signed-off-by: Mark Brown <broonie at linaro.org>
---
 arch/arm64/boot/dts/foundation-v8.dts  | 4 ++++
 arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts
index 4a060906809d..f91b2fa41fb3 100644
--- a/arch/arm64/boot/dts/foundation-v8.dts
+++ b/arch/arm64/boot/dts/foundation-v8.dts
@@ -34,6 +34,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			clock-frequency = <1000000>;
 		};
 		cpu at 1 {
 			device_type = "cpu";
@@ -41,6 +42,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			clock-frequency = <1000000>;
 		};
 		cpu at 2 {
 			device_type = "cpu";
@@ -48,6 +50,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			clock-frequency = <1000000>;
 		};
 		cpu at 3 {
 			device_type = "cpu";
@@ -55,6 +58,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			clock-frequency = <1000000>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
index 572005ea2217..d7debfe79d9f 100644
--- a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
@@ -37,6 +37,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			clock-frequency = <1000000>;
 		};
 		cpu at 1 {
 			device_type = "cpu";
@@ -44,6 +45,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			clock-frequency = <1000000>;
 		};
 		cpu at 2 {
 			device_type = "cpu";
@@ -51,6 +53,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			clock-frequency = <1000000>;
 		};
 		cpu at 3 {
 			device_type = "cpu";
@@ -58,6 +61,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x8000fff8>;
+			clock-frequency = <1000000>;
 		};
 	};
 
-- 
1.8.5.1